Import of a request failing : ERROR: connect failed due to DbSL load lib fa
Hi,
I am using ecc6, on hp-unix and oracle as database.
When i try to import a request from stms, i get this error.
DURING IMPORT ERROR:
Transport control program tp ended with error code 0249
Errors: connect failed due to DbSL load lib failure
TP ERROR:
Transport control program tp ended with error code 0249
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT E07K901512 DEV client100 U01 pf=/usr/sap/tr
Return code: 0249
Error text: connect failed due to DbSL load lib failure
Request: E08K901525
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
THEN I TRIED TO IMPORT USING TP COMMAND:
WITH OUT DIR_LIBRARY
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "environment variable DIR_LIBRARY is not set."
./R3trans finished (0012).
% # export DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- ORACLE_SID =
'DEV'"
./R3trans finished (0012).
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
COULD SOMEONE GIVE ME A SOLUTION TO OVERCOME THIS.
YOUR SOLUTION AND GREATELY APPRITIATED.
REGARDS,
DHANANJAY
Hi Dhanajay,
Firstly check if R3trans -d is working fine.
If so, please chek if the following parameters are set properly.
DIR_LIBRARY=/usr/sap/<SID>/SYS/exe/run
TRANSDIR = ....\trans
<SID>/DBHOST = <HOSTNAME>
<SID>/DBNAME = <SID>
<SID>/DBTYPE = ora
Execute the below command and check the transport profile:
tp check all pf=/usr/sap/trans/bin/TP_DOMAIN_<SID>.PFL
Please confirm the permission of the /oracle/ directory
The permission of the /oracle should be 755.
Also check if the import queue is not locked.
Also please ensure the Kernel is of latest version, if not, please update the DBSL shared library.Please look at the note 19466.
Finally you can try once distributing and activating the transport routes once.
When you executed command R3trans -d logfile trans.log will be created.
Please check this file for exact error information.
Paste the log file here.
Let us know the outcome.
Regards,
Sujit.
Similar Messages
-
TP error: connect failed due to DbSL load lib failure
Hi All,
I have prepared Quality system from Production system as System copy.I have upgarded Kernel from 620 to 640 in Quality system.
After Kernel upgrade , Server details are as below
Operating System : windows 2003 IA 64
Database : SQL server 2000 IA 64
Kernel :640 and compiled for 64 bit non unicode system ,
patch number is 43.
SAP : SAP R/3 4.7
Before kernel upgrade , server details are as below
Operating System : windows 2000 server
Database : SQL server 2000
Kernel :620 and compiled for Non unicode system ,patch number
is 1363
SAP : SAP R/3 4.7
I am able to transport request from Development to Quality . But when I try to import request from Quality I am getting error message "Connect failed due to DBSL Load lib failure"
Error message is " connect failed due to DBSL load lib failure
cannot find the DLL dbmssslib.dll in path( K:\usr\sap\NBQ\SYS\exe\run)
problem when loading DB-dependent DLLs."
I have set Environmnet variable ( DBMS_TYPE value as mss) for nbqadm user.
I have seen that dbmssslib.dll file is exist in exe/run path.
Does anyone having an Idea , how to resolve this issue.Pls help me
Thanks in advance
Regards
VenuHi ,
Thanks for all
Issue is resolved by myself.
Instead of update Kernel to 640 , I have downloaded latest 620 kernel patch on IA 64 .
Since my production server is running on x86 and 620 kernel , i have downloaded 620 kernel for IA 64 .
That resolved my issue.
Regards
Sai -
ERROR: No connect due to DbSl Load Lib Failure
Hi Everyone,
I am working on EHP 7 upgrade and currently at Extraction phase of SUM tool. There are numerous issues i have faced and resolved one by one. now i got stuck in this error
Severe error(s) occurred in phase PREP_INPUT/CONFCHK_IMP!
Last error code set: Calling 'D:\usr\sap\<SID>\DVEBMGS01\exe/tp' failed
with return code 249, check D:\usr\sap\<SID>\SUM\abap\log\TOOLOUT.LOG for
details
Toolout:
iles\Microsoft SQL Server\110\Tools\Binn\;D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=<SID>
ENV: dbs_mss_schema=<sid>
ENV: rsdb_ssfs_connect=0
EXECUTING D:\usr\sap\RES\DVEBMGS01\exe\tp.EXE "pf=D:\usr\sap\<SID>\SUM\abap\var\DEFAULT.TPP" getdbinfo SID
TRACE-INFO: 1: [ dev trc,00000] Mon Aug 11 20:14:06 2014 104676 0.104676
TRACE-INFO: 2: [ dev trc,00000] DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, count 1, addr 00007FFABDAD0000
TRACE-INFO: 3: 7 0.104683
TRACE-INFO: 4: [ dev trc,00000] using "D:\usr\sap\<sid>\DVEBMGS01\exe\dbmssslib.dll" 7 0.104690
ERROR: No connect due to DbSl Load Lib Failure
ERROR: Possible reasons are:
ERROR: - The value set for dbms_type ('mss') is invalid.
ERROR: - Cannot find the DLL dbmssslib.dll in path
ERROR: - problems when loading DB-dependent DLLs
ERROR: Connect to <SID>failed (20140811201406).
SAPup> Process with PID 3224 terminated with status 249 at 20140811201406!
R3trans -d returns following error (note: everything is normal at MMC and i am able to login SAP asusuall)
This is r3trans version 6.24 (release 741 - 10.06.14 - 20:14:07).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).
i have checked/ tried the following things but did not help
1. dbms_type is correct and check other parametrs aswell
2. downloaded latest dbmssslib.dll and tried replacing but did not help
3.replaced r3trans and TP with new patch level
4.checked scn for similar posts
please help me resolve this issue
thanks,
Shivgetting following error now
Checks after phase PREP_IMPORT/TOOLIMP_TOOLDEL_PRE were negative!
Last error code set: Detected 1 aborted activities in 'PHASES.ELG'<br/> Calling 'D:\usr\sap\<sid>\DVEBMGS01\exe/tp' failed with return code 12, check D:\usr\sap\<sid>\SUM\abap\log\SAPup.ECO for details
ERROR: Detected the following errors:
# D:\usr\sap\<sid>\SUM\abap\log\LM1I000099.<sid>: 4 ETW000 > parallel 3 4 ETW000 > 4 ETW000 > excluding 'R3TRDDDD','R3TRDOMA','R3TRDTEL','R3TRENQU','R3TRMACO','R3TRMCID','R3TRMCOB','R3TRSHLP','R3TRSQLT','R3TRTABL','R3TRTTYP','R3TRUENO','R3TRVIEW' 4 ETW000 R3trans was called as follows: D:\usr\sap\<sid>\DVEBMGS01\exe\R3trans.exe -u 26 -w D:\usr\sap\<sid>\SUM\abap\tmp\LM1I000099.<sid> D:\usr\sap\<sid>\SUM\abap\tmp\LM1KK000099.<sid> 4 ETW000 active unconditional modes: 26 2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
thanks,
Shhiv -
No connect due to DbSl Load Lib Failure - During upgrade
Hi,
I am in the middle of performing PREPARE on a ECC 5.0 system to upgrade to ECC 6.0. During the phase PR_DBPAR the following error is coming:
SAPup> Starting subprocess 15413368 at 20080525190758
ENV <0x1105f2e90>: ORACLE_PSRV=DR5
ENV <0x1105f2ed0>: PATH=/oracle/DR5/102_64/bin:.:/home/dr5adm:/usr/sap/DR5/SYS/e
xe/runU:/usr/sap/DR5/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/
sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
ENV <0x1105f3070>: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV <0x1105f30d0>: ORACLE_BASE=/oracle
ENV <0x1105f3290>: dbs_ora_tnsname=DR5
ENV <0x1105f32d0>: ORACLE_SID=DR5
ENV <0x1105f34b0>: DIR_LIBRARY=/usr/sap/put/exe
ENV <0x1105f3670>: dbs_ora_schema=SAPDR2
ENV <0x1105f3830>: ORA_NLS33=/oracle/client/9208/ocommon/nls/admin/data
ENV <0x1105f3990>: ORACLE_HOME=/oracle/DR5/102_64
ENV <0x1105f3a70>: dbms_type=ORA
ENV <0x1105f3c30>: LIBPATH=/usr/sap/put/exe:/usr/sap/DR5/SYS/exe/run
ENV <0x1105f3d50>: auth_shadow_upgrade=0
EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/DEFAULT.TPP execdbscript
DR5 -x SQLDBSCRIPT.TQL
This is /usr/sap/put/exe/tp version 372.04.08 (release 700, unicode enabled)
ERROR: No connect due to DbSl Load Lib Failure
ERROR: The values set for DIR_LIBRARY ('/usr/sap/put/exe') or dbms_type ('ORA')
ERROR: Connect to DR5 failed (20080525190759).
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
Warning: Parameter STARTDB is no longer used.
Warning: Parameter STOPDB is no longer used.
TRACE-INFO: 1: [dev trc ,00000] Sun May 25 19:07:59 2008
4777 0.004777
TRACE-INFO: 2: [dlux.c ,00000] *** ERROR => DlLoadLib: dlopen()=
0509-130 Symbol resolution failed for /usr/sap/put/exe/dboraslib.o because:
TRACE-INFO: 3: 0509-136 Symbol OCIClientVersion (numb
er 130) is not exported from
TRACE-INFO: 4: dependent module /usr/sap/DR5
/SYS/exe/run/libclntsh.a[shr.o].
TRACE-INFO: 5: 0509-022 Cannot load module /usr/sap/put
/exe/dboraslib.o.
TRACE-INFO: 6: 0509-026 System error: Cannot run a file
that does not have a valid format.
TRACE-INFO: 7: 0509-192 Examine .loader section symbols
with the 58 0.004835
TRACE-INFO: 8: 'dump -Tv' command. -> DLENOACC
ESS (8,Exec format error)
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0249
tp finished with return code: 249
meaning:
connect failed due to DbSL load lib failure
Process with ID 15413368 terminated with status 249
We are having oracle 10g on AIX 5.3.
I tried options like setting LIBPATH with /oracle/client/10x_64/instantclient (instead of the default /oracle/client/9208/lib) along with /usr/sap/DR5/SYS/exe/run and having LIBPATH only with /usr/sap/DR5/SYS/exe/run and having env variable DBS_LIBPATH_EXT=/oracle/client/10x_64/instantclient (as per note 836517)
but if i try to restart PREPARE again, it is picking up the changes happening in LIBPATH (but same error) and also it not picking up DBS_LIBPATH_EXT env variable at all (may be if i try to make it permanent using .sh file it will pick up but i dont want that)
With all the above said, anyone has any perfect idea to have this issue fixed and continue the prepare process ?
Thanks,
Murali.Hi Markus,
Thanks for your reply. The issue is as follows:
If i keep the current default value of the env variable LIBPATH which is
LIBPATH=/usr/lib:/lib:/usr/sap/DR5/SYS/exe/run:/usr/sap/DR5/SYS/exe/runU:/oracle
/client/9208/lib
and being in /usr/sap/SID/SYS/exe/run (which is 6.40 kernel ECC 5.0) if i execute
ldd dboraslib.o the following is the output:
dboraslib.o needs:
/usr/sap/DR5/SYS/exe/run/libsapu16.so
/usr/sap/DR5/SYS/exe/run/libclntsh.a(shr.o)
/oracle/client/9208/lib/libwtc9.so
/usr/lib/libc.a(shr_64.o)
/usr/lib/libpthreads.a(shr_xpg5_64.o)
/usr/lib/libdl.a(shr_64.o)
/usr/lib/libodm.a(shr_64.o)
/usr/lib/libc.a(aio_64.o)
/unix
/usr/lib/libcrypt.a(shr_64.o)
being in /usr/sap/put/exe (which is in the middle of PREPARE step for ECC 6.0 upgrade, so it put kernel 7.0 files), the following is the output:
dboraslib.o needs:
/usr/lib/libc.a(shr_64.o)
/usr/sap/DR5/SYS/exe/run/libclntsh.a(shr.o)
/unix
/usr/lib/libcrypt.a(shr_64.o)
/usr/lib/libpthreads.a(shr_xpg5_64.o)
/usr/lib/libdl.a(shr_64.o)
/usr/lib/libodm.a(shr_64.o)
/usr/lib/libc.a(aio_64.o)
But if i change the environment variable for LIBPATH as follows:
LIBPATH=/oracle/client/10x_64/instantclient:/usr/lib:/lib:/usr/sap/DR5/SYS/exe/run:
/usr/sap/DR5/SYS/exe/runU (since we have already installed oracle 10g which is up and running and so we have already installed instant client also during that process)
the following is what the output for both the path as mentioned earlier:
#[/usr/sap/put/exe]
#dr5adm@sapdr5-3d[DR5]> ldd dboraslib.o
dboraslib.o needs:
/usr/lib/libc.a(shr_64.o)
/oracle/client/10x_64/instantclient/libclntsh.a(shr.o)
/unix
/usr/lib/libcrypt.a(shr_64.o)
/usr/lib/libpthreads.a(shr_xpg5_64.o)
/usr/lib/libdl.a(shr_64.o)
/usr/lib/libodm.a(shr_64.o)
/usr/lib/libperfstat.a(shr_64.o)
/usr/lib/libcfg.a(shr_64.o)
/usr/lib/liblvm.a(shr_64.o)
#[/usr/sap/DR5/SYS/exe/run]
#dr5adm@sapdr5-3d[DR5]> ldd dboraslib.o
dboraslib.o needs:
/usr/sap/DR5/SYS/exe/run/libsapu16.so
/oracle/client/10x_64/instantclient/libclntsh.a(shr.o)
/oracle/client/92x_64/lib/libwtc9.so
/usr/lib/libc.a(shr_64.o)
/usr/lib/libpthreads.a(shr_xpg5_64.o)
/usr/lib/libdl.a(shr_64.o)
/usr/lib/libodm.a(shr_64.o)
/usr/lib/libperfstat.a(shr_64.o)
/usr/lib/libc.a(aio_64.o)
/unix
/usr/lib/libcrypt.a(shr_64.o)
/usr/lib/libcfg.a(shr_64.o)
/usr/lib/liblvm.a(shr_64.o)
DIR_LIBRARY on both the cases and by default also is /usr/sap/SID/SYS/exe/run (pointing to running 6.40 kernel)
But if i try the PREPARE with or without this changes, the issue what i reported is what happening. Let me know your ideas on this.
Thanks,
Murali. -
TP return code 0249 / No connect due to DbSl Load Lib Failure
Hi,
When I try to release a Transport in Transaction - SE01, we are
encountering the following error and the task gets released but the
Transport doesn't get released. Please find the error message below:
Test call of transport control program (tp) ended with return code 0249
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK RDDK123345 pf=C:\usr\sap\trans\bin\TP_DOMAIN_R3D.PFL
-Dtransdir=C:\usr\sa"
which checks the export requirements, returned the following
information:
Return code from tp: 0249
Error text from tp: ERROR: No connect due to DbSl Load Lib Failure
System response
Further processing is terminated.
Procedure
Check the following points:
o Feasibility of the transport control program tp
o Parameter settings in the transport profile
o Availability of the transport directory and the subdirectories
(cofiles, data, log, sapnames, bin)
o Write authorization for the subdirectories
o Write authorization for the files of the subdirectories cofiles,
data, log, sapnames
Release the request again when the error has been removed
Appreciate any help to resolve this error.
Thanks,
RajeshHi!
I have the same issue, but the windows enviroment variable has been set or should the parameter be set in the instance profile?
Thanks!
rollo
//solved
It was an issue with the RFC's and some mising services in the service file
Edited by: rollo on Jan 12, 2009 2:40 PM -
Erro: connect failed due to DbSL load lib failure
Error when trying to transport request
Error Attach.
My database is SQL 2008
Version of the kernel source: 201
Version of the kernel target: 225
Can you help me?
Tks,
RenatoHi,
I include the environment variables that were gone and rebooted the server, the error changed:
Erro: connect failed
Error code 0232
Tks,
Renato -
*** ERROR = CONNECT failed with SQL error '12154' after Oracle Upgrade
Hello Experts,
Recently I upgraded my oracle database from 11.2.0.3 to 11.2.0.4.The upgrade completed successfully but I am unable to start the instance.
R3trans -d failing with the error--
OCIServerAttach(OCI_DEFAULT) failed with -1=OCI_ERROR
OCIServerAttach(OCI_DEFAULT) failed with SQL error 12154:
ORA-12154: TNS:could not resolve the connect identifier specified
OCIServerAttach(con=0, svc=069C1630): Error 12154 attaching new srv=069C17D0
OCIHandleFree(con=0): Server handle srv=069C17D0 freed.
server_detach(con=0, svc=069C1630; srv=NULL, stale=2)
OCIHandleFree(con=0): Service svc=069C1630 freed (i=1).
*** ERROR => CONNECT failed with SQL error '12154'
-->oci_get_errmsg (con=0, rc=12154)
OCIErrorGet() -> SQL error code: 12154; buflen=66
OCIErrorGet(): error text ->
ORA-12154: TNS:could not resolve the connect identifier specified
ocica() -> SQL error code 12154,12154
DbSlConnect(con=0) -> orc=12154, rc=99=DBSL_ERR_DB
***LOG BY2=>sql error 12154 performing CON
***LOG BY0=>ORA-12154: TNS:could not resolve the connect identifier specified
I have checked listener is up and running properly.Entry is maintained in tnsnames.ora.
Also kernel is upgraded with latest path.Curent kernel version--742
Please suggest on the mentioned error.I am attaching the logs here.Thanks in advance.
Best Regards,
DebadityaHi Debadiya
Kindly check this SAP Notes
1204916 - Error: "ORA-12154" when connecting to Oracle from a Windows 64-bit platform
2153975 - Database connectivity fails with ORA-12154
556232 - Environment settings for R/3/Oracle on Windows
443867 - ORA-12154 Collective SAP note
BR
SS -
ERROR = CONNECT failed with sql error '1017'
Hi,
we are getting the following error when we run r3trans -dx.It is an windows system.
Here i have attached the trans.log.
4 ETW000 r3trans version 6.14 (release 700 - 16.10.08 - 16:26:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 30.11.2010 - 08:58:12
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Nov 30 08:58:14 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 3857 0.003857
4 ETW000 [dev trc ,00000] using "E:\usr\sap\TQ1\DVEBMGS10\exe\dboraslib.dll"
4 ETW000 22 0.003879
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 9 0.003888
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 18 0.003906
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.167)
4 ETW000 143 0.004049
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 16 0.004065
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 25 0.004090
4 ETW000 [dev trc ,00000] New connection 0 created 18 0.004108
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 29 0.004137
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 16 0.004153
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 15 0.004168
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 18 0.004186
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 223 0.004409
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 6714 0.011123
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 23 0.011146
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8DEC 2397 0.013543
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPRP1's password 16 0.013559
4 ETW000 [dev trc ,00000] Connecting as /@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 22 0.013581
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 18 0.013599
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000 109 0.013708
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 6894 0.020602
4 ETW000 [dev trc ,00000] Allocating server context handle 14 0.020616
4 ETW000 [dev trc ,00000] Attaching to DB Server TQ1 (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608)
4 ETW000 37 0.020653
4 ETW000 [dev trc ,00000] Assigning server context 0000000006E80608 to service context 0000000006E7E238
4 ETW000 21591 0.042244
4 ETW000 [dev trc ,00000] Allocating user session handle 32 0.042276
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000 32 0.042308
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000 34551 0.076859
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 23657 0.100516
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 13 0.100529
4 ETW000 [dev trc ,00000] Try to connect with default password 12 0.100541
4 ETW000 [dev trc ,00000] Connecting as SAPRP1/<pwd>@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 17 0.100558
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 16 0.100574
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000 18 0.100592
4 ETW000 [dev trc ,00000] Assigning username to user session 000000000032B808
4 ETW000 15 0.100607
4 ETW000 [dev trc ,00000] Assigning password to user session 000000000032B808
4 ETW000 23 0.100630
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000 18 0.100648
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000 3281 0.103929
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 19 0.103948
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 10 0.103958
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1017 performing CON [dblink#5 @ 431]
4 ETW000 10634 0.114592
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#5 @ 431]
4 ETW000 17 0.114609
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'TQ1'"Hi,
LOG BY0=>ORA-01017: invalid username/password; logon denied
You need to change your schema users password using "brconnect"
Try as follow:
1. Login as ora<sid>
2. Use below command to reset SAPRP1 users password
# brconnect -u system -f chpass -o SAPRP1 -p <new password>
If it still doesn't work... just set the password as "sap" (it is default password for schema user)
# brconnect -u system -f chpass -o SAPRP1 -p sap
Hope, it helps you...
Suggestions:
Above thing will help even if OPS$ mechanism is not set correctly...
But it is recommended to create and set permissions for OPS$ user. Else some BRTools function will produce errors...
Relevant notes are already suggested by others...
Please go through it word by word...
Regards.
Rajesh Narkhede -
ERROR = CONNECT failed with sql error '12518'
Hi All,
OS Win 2003 - 32 Bit, Database - Oracle 10.2.0.2 , I am facing this from yesterday, suddenly SAP was done and when i am checking the logs it is not able to connect to the database.
I have checked the services for oracle - service was down, i have started the oracleService<SID> and also i have restarted the listener.. after this when i am trying to start the SAP through MMC again the problem is face.. and also the oracle service is stopped. when i tried starting the database from OS level it was giving me error like
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-03113: end-of-file on communication channel
again the Oracle service is stopped i am not getting why the oracle service is stopping..
dev_w*.log
Thu Apr 09 10:33:50 2009
M calling db_connect ...
C Prepending D:\usr\sap\SID\DVEBMGS01\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@SID on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C84528 05C89AC4 05C8934C
C Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
C
C Thu Apr 09 10:33:51 2009
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@SM3 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C84528 05C89AC4 05C8934C
C Detaching from DB Server (con_hdl=0,svchp=05C89298,srvhp=05C9AB64)
C Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 10933]
B ***LOG BY2=> sql error 12518 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12518 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 16
M
M stat = 4
M reqtype = 6
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server hostname_SM3_01 on host tcs042619 (wp 16)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 09 10:33:51 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc16 7988) [dpnttool.c 327]
Any suggestions pls
MaheshHi Rohit,
when i check in the sqlnet.log
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SM2\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 04-SEP-2007 15:09:30
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
ns secondary err code: 0
nt main err code: 530
TNS-00530: Message 530 not found; No message file for product=NETWORK, facility=TNS
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:16:32
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:16:46
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:27
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:28
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:29
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:26:38
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 20:35:23
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 20:35:23
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-APR-2009 09:15:43
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-APR-2009 09:17:28
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
This error occured when the oracle service was not started..
Mahesh.. -
Trans.log file showing 'ERROR = CONNECT failed with sql error 12541'
Dear All
We have upgraded our datatabse from Oracle 9.2.0.8 to Oracel 10.2.0.4 on our ECC 5.0 IS-AFS SAP system. When we check version from SQL, it's showing 10.2.0.4. That means database is successfully upgraded. Now, when we login through our <SID>adm user and checking R3trans -d, it is showing
'This is R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
R3trans finished (0012).'
In the trans.log file it is showing,
4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 11:56:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 11:56:40 2009 110 0.000
110
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
137
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 62 0.000
199
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 77 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8142 0.008
418
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
461
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
522
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 421 0.008
943
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.008
989
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 75 0.009
064
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
112
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
165
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 55 0.009
220
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 53 0.009
273
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
322
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 521 0.009
843
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
927
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 65 0.009
992
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 2033 0.012
025
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPVAP's password 49 0.012
074
4 ETW000 [dev trc ,00000] Connecting as /@VAP on connection 0 (nls_hdl 0) ... (dbsl 640 1
80309)
4 ETW000 57 0.012
131
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 49 0.012
180
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 58 0.012
238
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 48 0.012
286
4 ETW000 [dev trc ,00000] Allocating server context handle 42 0.012
328
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 95 0.012
423
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 4556 0.016
979
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 59 0.017
038
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 39 0.017
077
4 ETW000 [dev trc ,00000] Try to connect with default password 184 0.017
261
4 ETW000 [dev trc ,00000] Connecting as SAPVAP/<pwd>@VAP on connection 0 (nls_hdl 0) ...
(dbsl 640 180309)
4 ETW000 46 0.017
307
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 48 0.017
355
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 48 0.017
403
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x1113b99f8)
4 ETW000 54 0.017
457
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1113b97d8,srvhp=0x1
113b99f8)
4 ETW000 54 0.017
511
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x1113b99f8 42 0.017
553
4 ETW000 [dev trc ,00000] Allocating server context handle 33 0.017
586
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 54 0.017
640
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 2547 0.020
187
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 45 0.020
232
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 28 0.020
260
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 428]
4 ETW000 220 0.020
480
4 ETW000 [dblink ,00428] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 428]
4 ETW000 42 0.020
522
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Checked the listener service. It is already started and status is OK. Please help.
Regards
Shashank ShekharHi
Yes, I am trying it with orasid user also. There in trans.log file it is showing:
'4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 15:54:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 15:54:42 2009 109 0.000
109
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
136
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 61 0.000
197
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 79 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8174 0.008
450
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
493
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
554
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 430 0.008
984
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.009
030
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 76 0.009
106
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
154
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
207
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 57 0.009
264
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 54 0.009
318
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
367
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 526 0.009
893
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
977
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 64 0.010
041
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIEnvCreate(mode=16384)' failed: rc = -
1
4 ETW000 1464 0.011
505
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code -1 40 0.011
545
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
4 ETW000 58 0.011
603
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error -1 performing CON [dblink#3 @ 428]
4 ETW000 74 0.011
677
4 ETW000 [dblink ,00428] ***LOG BY0=>Cannot get Oracle error text. [dblink#3 @ 428]
4 ETW000 55 0.011
732
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Someone suggested 'The solution is to download the new oracle client dll into the kernel'. Can anyone tell from where i can get the client dll for the kernel.
Regards
Shashank Shekhar -
Getting Logon Failed error connecting to SAP R/3 with Crystal
I have Crystal Reports 2008 and also the SAP Integration Kit installed on my desktop. I've imported the transports into my DEV and QAS systems and am trying to connect directly to R/3 from Crystal using the SAP Table, Cluster or Function choice.
I receive the error:
Logon failed. Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
I'm using a logon that has full rights within SAP. It recognizes my password because when I try a password that I know is wrong I get a different error message: Logon failed. Detail: Name or password is incorrect. I receive the same error in PRD even though I have not imported the transports into that client.
I have Crystal Server but am not trying to use that at the moment. Just Crystal Reports as a standalone product. If I've left something out please let me know.
Thank you,
Kevin ScheelerHi Kevin,
take a look at the Installation Guide for the SAP Integration Kit which includes a detailed list of authorizations per use case in the appendix
the documentation is available on help.sap.com
Ingo Hilgefort -
Error "Connection Failed The server may not exist or is not operational..."
This is just FYI in case somebody else runs across this. On one user account, an error window would pop up every so often that said:
Connection Failed
The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
It turns out that the problem was caused by Screen Saver. The error popped up whenever screen saver tried to launch. On the problem account I had the "Pictures" folder selected for the screen saver, and apparently there must be an alias in that folder pointing to something on a remote server, because as soon as I go to System Preferences and open the Screen Saver panel, I get the error.
It has been driving me crazy for months but finally I thought to look in Console, where I saw the error "afp_mount[5045] CFLog (0): CFMessagePort: bootstrap_register(): failed 1103 (0x44f), port = 0x2d03, name = 'com.apple.afp_mount.ServiceProvider'"
Searching for that error led me to the Macosxhints forum at http://forums.macosxhints.com/archive/index.php/t-53209.html where a user had posted the same problem. Changing to a different screen saver or a different folder for pictures resolved the issue.
PowerMac G5 Mac OS X (10.4.6)
PowerMac G5 Mac OS X (10.4.6)Welcome to discussions leffjay. Good one. Cheers.
-
Time Machine error: Connection Failed...
We just did a remodel that required me to take down all computers, internet, etc for a few days. Everything works (computers, internet, ooma, TV) now except Time Machine. This is the error I get: Connection Failed The server may not exist or is not operational at this time. Check the server name or IP address and your network connection and try again.
Time Machine Preferences shows accurate name, nothing (--) under Available, Oldest Backup and Latest Backup, but shows the time for Next Backup. The time changes after each non-backup but I never get the "Failed" designation under Latest Backup.
Any thoughts?
Much obliged!Go Mean Green wrote:
Much gracias, Pondini.
I am a neophyte, admittedly. Started looking for a Preferences section.
System Preferences > Time Machine; or click the TM icon in your menubar, or right-click the TM icon in your Dock, and select Open Time Machine Preferences.
The storage location for Time Machine backups can't be found.
That means Time Machine can't find your backups in the location where they used to be, probably as a result of re-configuring things. One of the things suggested earlier will probably fix that.
Very paranoid that I am even more stupid than already agreed upon.
Nope. Nobody was born knowing all this stuff! -
Local network error: Connection Failed.
I get the following error message when trying to access any of the computers on our local netwrok:
Connection failed.
The server may not exist or itnot operational at
this time. Cjecl tje server name or IP address and
your network connection and try again.
The computers on the network show up in the Finder under Shared, but when I choose one of the icons, it shows up as Connection Failed - and nothing happens when clicking Connect As.Have you tried manually connecting to a shared Mac by its IP address?
from the finder press command +K then enter the IP address of the mac you are trying to connect to.
this would rule out an issue with ipv4 networking.
then using the same method use the macs bonjour name. This is the computer name specified in that servers sharing preferences followed by .local
eg.
imac.local
This would find out if the issue is with bonjour networking.
Also in an earlier thread a mac could not connect to any shared computers and this was resolved by the procedure shown in Mac OS X 10.5: "The text entered does not appear to be a recognized URL format" alert when connecting to server or Time Machine -
Hello every DBA,
After creating successuffuly repository, I cannot configure dbconsole :
#emca -config dbcontrol db
fails always with the same error in the emdctl.trc file.
2011-04-26 15:41:50,263 Thread-1 WARN http: nmehl_connect_internal: connect failed to (louxor:3938): A remote host refused
an attempted connect operation. (error = 79)
Does someone eunconter this error ?
ORACLE_HOME version is 11.2.0.2
Many thanks in advance.Hi,
if louxor is the hostname can you try pinging it.
Regards,
Satheesh Shanmugam
http://borndba.com
Maybe you are looking for
-
Tecra A8, WinXP SP2 - issue with built-in speakers
Hello there, I know this issue has been brought up a few times, but I can't find a solution. I recently inherited a Toshiba Tecra A8. Problem is : the built-in speakers can't seem to work, but the sound is just fine on external speakers or headphones
-
Gather_table_stats in a batch process
Hi everyone, we have a bit of a problem with several batch processes. Their basic structure of a batch process this 1. do some init tasks - record the batch process as running, load parameters etc. generally a very simple tasks (haven't seen those to
-
Search Help for standard field
I need to enhance the existing collective search help provided for a certain standard field(ex.Field XXX). However while providing this additional search help, I need to show XXX data along with YYY( this is maintained in some other table but linked
-
Hi, I have an interesting problem. In my ctor of a Creator JSP page, after the built-in initialization for a rowSet, I call some innocent SQL like so: attributeRowSetForListbox.setInt( 1, PRODUCT_ID); attributeRowSetForListbox.setString( 2, "f"); att
-
Hello, Since it's not possible to add IT2051 to the AdHoq Query, I was trying to create an additional structure and wrote a little program for retrieving absence data. The problem I get is that the output only shows results for 1 day and not for the