Import of Advanced G/L Determination in 9.0 Patch 5

Hi All
I am trying to Import the Advanced G/L Determination in SAP B1 9.0 Patch 5 (Using both groups and Item Level as my Determination Criteria
Does any one have experience of doing  this ?
Regards
Andrew

Hi,
I chosen the option like Migrate Account Assignment and Inventory G/L account determination
setting. then i set criteria  Item group ,warehouse code, item code because i had to use
three combination For example i have 10 items in XYZ item group then My inventory
account is 100000. But one of the item in XYZ group need to post another inventory account
like 200000 in this case you can either configure item code or warehouse code for this item
under the itemgroup XYZ. similary you can have other type also if you enable (7)

Similar Messages

  • Advanced G/L determination and segmented accounts. Need Help!!!

    Hi, I have a client that is using segmented chart of accounts with advanced g/l determination this is on v9 PL05.
    I have setup some rules to post to certain GL's based on item and nothing else.
    When the client posts an AP Invoice he enters the first line and the right gl is retrieved, according to the rules. However should the user wish to change that GL to another a problem arises.
    When the second line is entered the advanced gl determination seems to re-run on ALL Lines in the document re-setting any changes made to previous lines!!!! 
    I was wondering if anyone else has had any similar experiences, the customer cannot work this way and I'm thinking of turning off "Advanced G/L Determination" which is a pity as he does want AR documents to post by BP!

    Hi,
    I chosen the option like Migrate Account Assignment and Inventory G/L account determination
    setting. then i set criteria  Item group ,warehouse code, item code because i had to use
    three combination For example i have 10 items in XYZ item group then My inventory
    account is 100000. But one of the item in XYZ group need to post another inventory account
    like 200000 in this case you can either configure item code or warehouse code for this item
    under the itemgroup XYZ. similary you can have other type also if you enable (7)

  • Version 9.1 - Advanced GL Account determination - WIP Mapping Tab

    Dear community,
    Does anybody have an idea / documentation with respect to the functionality under the WIP Mapping tab in Advanced GL Account determination screen of version 9.1?
    Consolidate from accounts can be mapped to Consolidate To accounts under that Menu path.
    Even when a production order is closed with Variances and with the document setting (Production Order > Posting Schemas for Manufacturing : Accounting with Balance Sheet Accounts and Profit and Loss Accounts being selected) no consolidation is happening as if there is no functionality behind this tab.
    Kind regards,
    Sarp

    Hi Sarp,
    You can check the below mentioned link. Unfortunately, this is the only one availbale at the moment..
    Production - Partner Preview - 20131023
    Thanks,
    Joseph

  • The SMS Advanced Client has determined that its policy is incorrect

    I've found a couple of similar threads on here with this issue, but the circumstances have been somewhat different and I am still trying to find a resolution.
    We are running SCCM 2007 R3.  On every computer in our environment, the following event log entry appears every day.  I'd like to know why it is happening and how to get rid of it.
    Log Name:      Application
    Source:        SmsClient
    Date:          9/19/2011 7:59:07 AM
    Event ID:      10805
    Task Category: None
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      XXXXX
    Description:
    The SMS Advanced Client has determined that its policy is incorrect. A full policy update will be requested to correct the issue. For more information see PolicyAgent.log on the client machine.

    Here is a snippet from my policyevaluator.log - I'm not seeing anything of particular interest here, am I missing something?
    Raising event:
    instance of CCM_PolicyAgent_PolicyEvaluationComplete
     ClientID = "GUID:371B6A81-1FF0-4A63-B6D2-59608A7FE672";
     DateTime = "20110919143918.885000+000";
     PolicyNamespace = "\\\\IT-PC4871\\ROOT\\ccm\\Policy\\S_1_5_21_36134387_1236994427_903097961_25607\\RequestedConfig";
     ProcessID = 2592;
     ThreadID = 4808;
     PolicyAgent_PolicyEvaluator 9/19/2011 7:39:18 AM 4808 (0x12C8)
    Updating settings in
    \\it-pc4871\root\ccm\policy\machine\actualconfig PolicyAgent_PolicyEvaluator 9/19/2011 7:40:16 AM 7872 (0x1EC0)
    Settings update not required. No changes detected. PolicyAgent_PolicyEvaluator 9/19/2011 7:40:16 AM 7872 (0x1EC0)
    Raising event:
    instance of CCM_PolicyAgent_SettingsEvaluationComplete
     ClientID = "GUID:371B6A81-1FF0-4A63-B6D2-59608A7FE672";
     DateTime = "20110919144016.382000+000";
     PolicyNamespace = "\\\\it-pc4871\\root\\ccm\\policy\\machine\\actualconfig";
     ProcessID = 2592;
     ThreadID = 7872;
     PolicyAgent_PolicyEvaluator 9/19/2011 7:40:16 AM 7872 (0x1EC0)
    Updating settings in
    \\it-pc4871\root\ccm\policy\s_1_5_21_36134387_1236994427_903097961_25607\actualconfig PolicyAgent_PolicyEvaluator 9/19/2011 7:41:18 AM 7920 (0x1EF0)
    Raising event:
    instance of CCM_PolicyAgent_SettingsEvaluationComplete
     ClientID = "GUID:371B6A81-1FF0-4A63-B6D2-59608A7FE672";
     DateTime = "20110919144119.392000+000";
     PolicyNamespace = "\\\\it-pc4871\\root\\ccm\\policy\\s_1_5_21_36134387_1236994427_903097961_25607\\actualconfig";
     ProcessID = 2592;
     ThreadID = 7920;
     PolicyAgent_PolicyEvaluator 9/19/2011 7:41:19 AM 7920 (0x1EF0)
    Triggered update of logged-on user settings PolicyAgent_PolicyEvaluator 9/19/2011 7:54:08 AM 3276 (0x0CCC)
    Evaluating policy in
    \\IT-PC4871\ROOT\ccm\policy\machine\requestedconfig PolicyAgent_PolicyEvaluator 9/19/2011 7:54:12 AM 3936 (0x0F60)
    Applying policy CSR20008-CSR00008-E008F92D PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy CSR2000C-CSR00009-DBBBC9D6 PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy CSR20076-CSR0003D-DBBBC9D6 PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy CSR200AC-CSR0004B-7D1B5B9B PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy CSR200C3-CSR00042-EC5A5039 PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy CSR200DB-CSR00070-221FBB8C PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy CSR200F9-CSR0004A-926C17AC PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy CSR2012C-CSR00089-DBBBC9D6 PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy CSR201F8-CSR0004A-1455B7D9 PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy CSR2020B-CSR0004A-849F62FF PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy CSR2020E-CSR0004A-153F1250 PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy DEP-CSR2012C-CSR00088-31A28E80 PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy DEP-CSR2012C-CSR00088-412FC222 PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {034b9d39-26fe-431a-93de-015bb7f79c0a} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {06368e74-da19-4644-8467-6393670d7853} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {0eb00e0e-cd76-40e3-b465-cddb858bd204} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {14D84263-FBCE-4D15-9200-82828A913155} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {1620B7B5-AC6F-416A-A622-DCCEDAFF6BFE} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {22f8cd33-b080-4837-8204-f58ba4ef3360} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {2664cada-b22c-43a8-b5ff-08742a522a22} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {2aa83e60-7040-4153-845a-14716ec587a4} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {3494cceb-7f84-4efe-9907-735d282097e5} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {374eea5b-43fd-425c-b360-3b000f4bf04b} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {72b743d2-9809-4654-b0aa-758799207e28} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {72fa590c-be14-45a0-8a25-dfa405c4ab43} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {7584ae37-23f2-42af-a94e-264bec686d74} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {7f93a927-3a1b-4bb8-80a4-0474be87914f} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {855aace3-ae63-43f3-ac1f-c361b06090a0} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {8730AFC8-2B4D-4FD7-BCD8-BD6D30D57E04} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {8B1E0796-7374-443C-AB04-FD17198E1B8D} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {90d91276-05f9-4909-851e-818bbecba4b3} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {a583a7d3-ade7-4522-851d-771eaa49f6c8} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {a5b80a59-393c-4510-bb22-0543a198e708} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {B281AB1A-77A0-4386-89FA-DC4AEBE15CAF} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {b296c946-7707-4cf4-80c5-06fe08185edf} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {d28a0a2d-f674-4631-bad1-29e553a16ebb} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {dc1a0735-0e8b-4a1c-9928-8fa36ea383f2} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {dd244f8f-b760-44a4-af65-aef92b5e4d33} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {dd55a2b7-203d-4ef7-9d69-c2de863496d7} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {e30516b6-e2b9-47b2-8261-964d7156887b} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {e442e9dd-bc90-41a5-96af-de41f7cbb7eb} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Applying policy {f8448e2b-e247-447b-9888-aad08d862228} PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Raising event:
    instance of CCM_PolicyAgent_PolicyEvaluationComplete
     ClientID = "GUID:371B6A81-1FF0-4A63-B6D2-59608A7FE672";
     DateTime = "20110919145413.189000+000";
     PolicyNamespace = "\\\\IT-PC4871\\ROOT\\ccm\\policy\\machine\\requestedconfig";
     ProcessID = 2600;
     ThreadID = 3936;
     PolicyAgent_PolicyEvaluator 9/19/2011 7:54:13 AM 3936 (0x0F60)
    Evaluating User policy for 'S-1-5-21-36134387-1236994427-903097961-25607' PolicyAgent_PolicyEvaluator 9/19/2011 7:54:33 AM 2272 (0x08E0)
    Evaluating policy in
    \\IT-PC4871\ROOT\ccm\Policy\S_1_5_21_36134387_1236994427_903097961_25607\RequestedConfig PolicyAgent_PolicyEvaluator 9/19/2011 7:54:33 AM 2272 (0x08E0)
    Raising event:
    instance of CCM_PolicyAgent_PolicyEvaluationComplete
     ClientID = "GUID:371B6A81-1FF0-4A63-B6D2-59608A7FE672";
     DateTime = "20110919145433.651000+000";
     PolicyNamespace = "\\\\IT-PC4871\\ROOT\\ccm\\Policy\\S_1_5_21_36134387_1236994427_903097961_25607\\RequestedConfig";
     ProcessID = 2600;
     ThreadID = 2272;
     PolicyAgent_PolicyEvaluator 9/19/2011 7:54:33 AM 2272 (0x08E0)
    Triggered update of logged-on user settings PolicyAgent_PolicyEvaluator 9/19/2011 7:54:39 AM 2136 (0x0858)
    Updating settings in
    \\it-pc4871\root\ccm\policy\s_1_5_21_36134387_1236994427_903097961_25607\actualconfig PolicyAgent_PolicyEvaluator 9/19/2011 7:54:39 AM 2272 (0x08E0)
    Raising event:
    instance of CCM_PolicyAgent_SettingsEvaluationComplete
     ClientID = "GUID:371B6A81-1FF0-4A63-B6D2-59608A7FE672";
     DateTime = "20110919145439.518000+000";
     PolicyNamespace = "\\\\it-pc4871\\root\\ccm\\policy\\s_1_5_21_36134387_1236994427_903097961_25607\\actualconfig";
     ProcessID = 2600;
     ThreadID = 2272;
     PolicyAgent_PolicyEvaluator 9/19/2011 7:54:39 AM 2272 (0x08E0)
    Updating settings in
    \\it-pc4871\root\ccm\policy\machine\actualconfig PolicyAgent_PolicyEvaluator 9/19/2011 7:56:16 AM 3172 (0x0C64)
    Raising event:
    instance of CCM_PolicyAgent_SettingsEvaluationComplete
     ClientID = "GUID:371B6A81-1FF0-4A63-B6D2-59608A7FE672";
     DateTime = "20110919145617.174000+000";
     PolicyNamespace = "\\\\it-pc4871\\root\\ccm\\policy\\machine\\actualconfig";
     ProcessID = 2600;
     ThreadID = 3172;
     PolicyAgent_PolicyEvaluator 9/19/2011 7:56:17 AM 3172 (0x0C64)
    Updating settings in
    \\it-pc4871\root\ccm\policy\s_1_5_21_36134387_1236994427_903097961_25607\actualconfig PolicyAgent_PolicyEvaluator 9/19/2011 7:56:37 AM 3172 (0x0C64)
    Raising event:
    instance of CCM_PolicyAgent_SettingsEvaluationComplete
     ClientID = "GUID:371B6A81-1FF0-4A63-B6D2-59608A7FE672";
     DateTime = "20110919145637.475000+000";
     PolicyNamespace = "\\\\it-pc4871\\root\\ccm\\policy\\s_1_5_21_36134387_1236994427_903097961_25607\\actualconfig";
     ProcessID = 2600;
     ThreadID = 3172;
     PolicyAgent_PolicyEvaluator 9/19/2011 7:56:37 AM 3172 (0x0C64)

  • Wrongly imported 24p Advanced into 30i timeline.

    Dear Forum,
    I shot 24pA and imported it into a 30i timeline thinking that the output onto BetaSP would be in 30i. I am now almost done with editing this project and realized that I may have edited in the wrong timeline all along. Since the pull down (2:3:2:3 vs. 2:3:3:2) is not accurate and leaves me with an additional field of lines, making the image look striped every few frames. Is there any way of taking out these additional frames at this point? If I would have edited this project in a 24p timeline as required for 24pA shooting, how could I even output to a 30i format?
    Thank you very much for your answer.
    Sarah
    PowerBook G4   Mac OS X (10.4.7)  

    Your 24pA footage actually comes off the tape as 30i with the advanced pulldown, which is just the pattern of interlaced and de-interlaced frames which allows the 24p to be "put back together" from the 30i.
    If you don't remove the pulldown, you should be able to edit these clips into a 30i timeline and not have any problems. You might see field lines in the canvas, or jiggly freeze frames on your external video on interlaced frames, but if you have used easy setup, and the field dominance of your clips matches that of your sequence, the 30i motion video should not show field artifacts. It is possible that if you have source material that has cuts in it, that you can get frames with fields from either side of the cut, but that's not to likely on tapes that came right from the camera.
    If you want edit in 24p, you are in luck that your footage is 24pA, because this can be converted right in FCP, either before capture, or after, with "remove advanced pulldown". Once this is done, you will have 24p clips (23.98) that you can edit into a 24p timeline and everything will be progressive and groovy. When you output back to tape from a 24p timeline, there is a setting in the A/V prefs to determine whether the output to tape uses the standard or advanced pulldown. If you master the 24p to tape (where it will have pulldown added, as you can't acutally record"24p" on videotape) You should use edit to tape to be sure the program starts on a 00 frames point, such as 01:00:00:00 on a pre-striped tape with NDF timecode. Observing this standard will streamline any inverse telecine process that might be done with tape in the future, such as encoding to 24p for DVD, ar getting a film transfer made.
    hope this helps

  • Mass role Import in ERM "unable to determine matching org. level" Error

    I am trying to upload the Derived Roles into the ERM. I have already uploaded all the Parents Roles. The volumes of the Derived Roles is huge in my SAP Backend system.
    I am not able to understand what should be the content of Org File which we upload. Please correct if I am wrong
    1>Example a role Z_TEST_D is derived from Z_TEST on the org levels EKGRP,KOART,GSBER,WERKS.
    2>I have run Org Synchronization Job in the ERM
    3>Downloaded Z_TEST (Parent Role) and uploaded it into ERM(It was easy because there was no org file)
    4> Downloaded Z_TEST_D(Derived Role) through /VIRSA/RE_DNLDROLES Tcode in backend.
    5>Downloaded the AGR_1252 information for this role which contained the Org levels and values
    6>I put all those information into the Org File and then tried to upload it throws me the error Role Z_TEST_D : not imported; unable to determine matching org. level for WERKSin the system
    So I again tried with the another method by changing the input sheet for the Org File
    Z_TEST_D BUKRS 0* 9*
    Z_TEST_D EKGRP *
    Z_TEST_D KOART *
    Z_TEST_D GSBER *
    Z_TEST_D WERKS *
    and tried to upload it again gave me the same error. I have checked the ERM all these Org Levels are fetched into the ERM. I am not sure if I am missing any basic things.
    Current Support pack: SP10 Hot Fix 2.
    Please share your experience and best practice to upload the roles,

    Hello Rahul,
    I had that same problem with SP10 also. The way I resolved itand this sounds crazywas to move that WERKS line up one or two rows.
    The problem I noticed was not with all derived roles, but when there was a problem, it was always the last line of the Org file for the role that was causing the problem. And the problem was not always WERKS either.
    If the next time you run it, the error occurs on the "new" last line (e.g. GSBER), move that line up also. Eventually they all make it in. I have not seen this problem repeated in SP12. Don't delete the line, just shift the order within the number of rows the role has.
    P.S. I have several hundred derived roles, about 10 - 15% had this import problem.
    -Dylan

  • How to determine the Plunin Bundle Patch version applied

    Working to apply the EM DB Plugin Bundle Patch 12.1.0.5.8 (Agent Monitoring).  The current Plug-in Version is 12.1.0.5.0.  How can I check or determine that the 12.1.0.5.8 Plugin Bundle Patch has been applied to a given Agent?  Bundle Patches are being released maybe every 30-days.  Would like to be able to view the Plugin Bundle patch level for a given Agent to the 5th number, "8" in this case 12.1.0.5."8" .

    From EM, go to the Agent target, on the bottom left hand side, you'll see a Configuration section, click on the Oracle Home and Patch Details link...
    This will bring up the Oracle Home for the agent, and in the middle-right section there is a TAB for Patches Applied. This will list the Patch # and the Description, which has the 5th digit...
    If you're on the agent, each plugin has it's own ORACLE_HOME.  You can find them by looking at the inventory, or run opatch from the agent...
    if agent is installed in /oracle/agent, you will have a plugins directory:
    drwxr-xr-x  8 cllamas dba 4096 Feb  4 15:03 oracle.mysql.omys.discovery.plugin_12.1.0.1.0
    drwxr-xr-x  6 cllamas dba 4096 Feb  4 15:03 oracle.sysman.db.discovery.plugin_12.1.0.7.0
    drwxr-xr-x  8 cllamas dba 4096 Feb  4 15:03 oracle.sysman.emas.discovery.plugin_12.1.0.7.0
    drwxr-xr-x 11 cllamas dba 4096 Feb  4 15:09 oracle.sysman.oh.agent.plugin_12.1.0.4.0
    drwxr-xr-x  6 cllamas dba 4096 Feb  4 15:03 oracle.sysman.oh.discovery.plugin_12.1.0.4.0
    drwxr-xr-x  7 cllamas dba 4096 Feb  4 15:03 oracle.sysman.vi.discovery.plugin_12.1.0.1.0
    drwxr-xr-x  6 cllamas dba 4096 Feb  4 15:03 oracle.sysman.xa.discovery.plugin_12.1.0.6.0
    You can run opatch lsinventory -oh /oracle/agent/plugins/oracle.sysman.oh.agent.plugin_12.1.0.4.0
    to get the version and patches applied.   I've already upgraded to DB Plugin 12.1.0.7 so i don't have an example to show at command line, but it will also list out the patch # and description which will have the 5th digit.

  • How to determine OS version and patch level?

    I have oracle linux, and uname -a as following:
    # uname -r
    2.6.39-200.29.2.el6uek.x86_64
    Exadata node:
    # imageinfo
    Kernel version: 2.6.18-274.18.1.0.1.el5 #1 SMP Thu Feb 9 19:07:16 EST 2012 x86_64
    Image version: 11.2.3.1.1.120607
    Image activated: 2012-08-07 11:51:55 -0400
    Image status: success
    System partition on device: /dev/mapper/VGExaDb-LVDbSys1
    Thanks!
    Edited by: 943714 on Feb 28, 2013 12:28 PM
    Edited by: 943714 on Feb 28, 2013 12:45 PM

    You might want to check http://www.oracle.com/us/technologies/027626.pdf
    And also:
    <pre>
    # yum info oraclelinux-release enterprise-release
    Loaded plugins: security
    This system is not registered with ULN.
    ULN support will be disabled.
    Installed Packages
    Name : enterprise-release
    Arch : x86_64
    Epoch : 6
    Version : 5
    Release : 8.0.3
    Size : 57 k
    Repo : installed
    Summary : Enterprise Linux release file
    License : GPL
    Description: System release and information files
    Name : oraclelinux-release
    Arch : x86_64
    Version : 5
    Release : 8.0.2
    Size : 32
    Repo : installed
    Summary : Oracle Linux release file
    License : GPL
    Description: System release file
    </pre>

  • Need help to determine sequence of the patches

    --Patch 3485155 how to apply using DOC ID 302074.1 As per that 1 of the prereq of patch 4626807 we do not have. when I am reading readme of 4626807
    ----4626807,4626807 is now superseeded by 6323851 readme of 6323851 says
    2 .Pre-requisite or Co-requisite which is not included with this patch:
    Co-requisite:
    Patch 4761660:FP.M Upgrade Issues:PA_COST_PLUS INVALID.
    3. Patch Applicable for versions/releases:
    11i.PJ_PF.M( which is a3485155)
    7. Pre-patch application steps
    This is a pre-install patch. This patch should be applied with argument
    preinstall='y'
    ----4761600, 4761600 Readme says
    3. Patch Applicable for versions/releases:
    11i.PJ_PF.M (which is 3485155)
    What should be our sequence of applying above patches?

    Hi,
    metalink says
    "If you are downloading patch 4626807 because it is a prerequisite for another patch or patchset, *you should verify whether or not 6323851 is suitable as a substitute prerequisite before downloading it*."
    Thanks

  • How can I determine if a Critical Patch Update has been installed?

    I know I can use opatch -lsinventory to confirm that a the patch has been installed in an Oracle home, but how can I check to see if the CPU script (catcpu.sql) has been run in a database?
    I'd like to know for two reasons:
    1. I am concerned because I have many databases to patch under a single Oracle home and I'd like to check them all to make sure I didn't miss any.
    2. I've heard that I'll have to run catcpu.sql in any new database I create under this Oracle home. I know I'll eventually forget to do this, so I'd like some way to check if the script has been run.
    Thanks in advance

    Paul,
    Starting from CPUJan2006, these actions will be recorded in registry$history table.
    You can find this out by
    select ACTION , VERSION, COMMENTS from registry$history;
    SQL> select * from registry$history;
    ACTION VERSION COMMENTS
    CPU 10.2.0.1.0 CPUJan2006
    Before CPUJan2006, you may to check it through a crude way of finding CPUXxxYYYY dir and cheking APPLY... and ROLLBACK... log files.
    Akshay.

  • Change  advance on power  point slide  after import

    How  do I change a power point slide that was imported to advance on click but I want the slides to advance automatically? 

    Hello,
    Watch the imported slides, they all have a Click Box inserted at the end of the timeline (see screenshot in the red rectangle). Delete that click box and the slide will advanced automatically.
    Lilybiri

  • There is no 'Position' field on the advanced Customer Import template - how do i add this?

    Hi All ,
    I'm sure im not the first one to encounter this issue but i dont see another question similar .
    My client would like to also add the customer's 'Position' to the CRM record when they upload the spreadsheet. IE Bob Smith, Managing Director....
    There is no column for 'Position' - How would you suggest going about doing this?
    Thanks .

    Hi,
    If you have generated this field via Admin > CRM > Extend CRM Database, then when going to CRM > Customers > Import Contacts (Advanced), near the bottom of the page, you'll see a drop-down ("Choose CRM Form if you wish to import custom information for contacts") from where you can choose to include the respective field in the import template.
    Kind Regards,
    Alex

  • Slidelet causing imported SWF to advance

    Hi,
    I'm seeing some strange slidelet behavior. I have an imported
    SWF on the slide, consisting of 8 frames. On the same slide are 2
    slidelets. When rolling OFF either slidelet the imported SWF
    advances 1 frame. The slidelets have their own screen real estate
    and don't overlap or interact with the SWF in any way (other than
    this advancing feature/bug ;-) I have tried adding movie stops to
    each frame of the animation, but they seem to be ignored.
    I have also tried various order combinations in the timeline
    of the SWF and slidelets to no avail.
    Ideas anyone?
    Thanks,
    John

    Thanks for the suggestion, I think I understand what you are
    trying to achieve. The thing is that the user is asked to interact
    with the .swf and then roll over the answer(s) to question(s) about
    the .swf. Although the .swf and slidelets could be on seperate
    slides, I would prefer not having to switch back and forth between
    slides in order to answer the questions. Before anyone asks 'why
    not just use buttons with captions?', I have tried that, but
    buttons (clickboxes and questions) don't reset
    John

  • How do I import contact list using advanced template?

    I used to be able to do this - but don't seem to be able to see the option with the new interface. I originally downloaded the advanced excel template - it had more fields than the basic template available on the 'Import contacts' page.

    Hi
    I believe you are trying to import contacts in CRM,
    You just need to import the file through CRM > Customers > Advance Import.
    If you want to import only Email, Title, First name , Surname and company name you can go with basic import , else use Import contacts(Advanced)
    Regards,
    Sanjit

  • Any way to change the video frame size once imported into fcp?

    I have an edit that was done with 2 cameras. I wanted to create a multiclip edit but the size of the video from the 2 cameras are different. One file is 720x480 and the other is 720x486. My sequence is 720x480. Is there a way to adjust the 720x486 footage while in fcp to match the 720x480 footage without re importing the footage.
    Thanks

    first determine what you want your sequence dimensions to be. 480 or 486. if it's 486 then just take your 480 clips and scale them slightly so they will the entire frame. if your sequence dimensions are 480 then you shouldn't need to adjust your 486 clips.the FCP manuals suggest that your footage will look better upscaling them with Compressor rather than in FCP. but it all depends on what your delivery is.

Maybe you are looking for