Import of Apex Application to another instance takes a long time

Hi,
I have developed an apex application which is of size -24 MB .While importing the appl to another instance it takes a long time (few hours). The imported appl is working fine so far.
What should be the ideal time for the import of this size appl ?
Is it the usual due to the size of the app or some thing is wrong with the app ?
Any one can please throw some light on this, as I am unable to figure out if it the appl issue or the DB issue.
Thanks in advance!

The application is getting imported and running, so you do not really have a problem in hand.
24M is big, but not all that big to run for hours.
The time taken depends on the resources available on the server where you are trying to import. If the load on that server is high then the resources will be shared between all the processes run on it, and the import process will run longer.
Monitor disk and CPU usage, it will provide you some clues. Try importing at offpeak time and it should run faster if there is a server resource issue.
Regards,

Similar Messages

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 MacBook Pro (13-inch, Early 2011) (Technical Specifications)
 MacBook Pro - model: MacBookPro8,1
 1 2.3 GHz Intel Core i5 CPU: 2-core
 16 GB RAM Upgradeable
 BANK 0/DIMM0
 8 GB DDR3 1333 MHz ok
 BANK 1/DIMM0
 8 GB DDR3 1333 MHz ok
 Bluetooth: Old - Handoff/Airdrop2 not supported
 Wireless: en1: 802.11 a/b/g/n
 Battery Health: Normal - Cycle count 250
Video Information: ℹ️
 Intel HD Graphics 3000 - VRAM: 512 MB
 Color LCD 1280 x 800
System Software: ℹ️
 OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
 Hitachi HTS545032B9A302 disk0 : (320,07 GB)
 EFI (disk0s1) <not mounted> : 210 MB
 Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
 Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
 Core Storage: disk0s2 319.21 GB Online
 MATSHITADVD-R UJ-898
USB Information: ℹ️
 Apple Inc. Apple Internal Keyboard / Trackpad
 Apple Inc. BRCM2070 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple Inc. FaceTime HD Camera (Built-in)
 Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
 Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
 Mac App Store and identified developers
Launch Agents: ℹ️
 [not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [loaded] com.oracle.java.Java-Updater.plist [Click for support]
 [running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
 [loaded] com.adobe.fpsaud.plist [Click for support]
 [loaded] com.adobe.SwitchBoard.plist [Click for support]
 [loaded] com.microsoft.office.licensing.helper.plist [Click for support]
 [loaded] com.oracle.java.Helper-Tool.plist [Click for support]
 [loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
 [running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
 [loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [loaded] com.google.keystone.agent.plist [Click for support]
 [running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
 iTunesHelper UNKNOWN Hidden (missing value)
 AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
 Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
 JavaAppletPlugin: Version: Java 8 Update 31 Check version
 FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
 Default Browser: Version: 600 - SDK 10.10
 AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
 AdobePDFViewer: Version: 10.1.13 [Click for support]
 Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
 QuickTime Plugin: Version: 7.7.3
 SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
 Google Earth Web Plug-in: Version: 7.1 [Click for support]
 Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
 iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
 npsf_cef: Version: sf 3.3.1.1 [Click for support]
 Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
 DivX HiQ
 DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
 Flash Player [Click for support]
 Java [Click for support]
 MacFUSE [Click for support]
 Perian [Click for support]
 Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
 Skip System Files: NO
 Auto backup: YES
 Volumes being backed up:
 Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
 Destinations:
 Time Machine Backups [Local]
 Total size: 999.86 GB
 Total number of backups: 60
 Oldest backup: 2012-07-15 01:16:54 +0000
 Last backup: 2015-03-29 19:28:06 +0000
 Size of backup disk: Excellent
 Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
 97% rapportd
 3% WindowServer
 1% mds
 0% fseventsd
 0% distnoted
Top Processes by Memory: ℹ️
 155 MB Safari
 120 MB Finder
 86 MB rapportd
 86 MB WindowServer
 69 MB mds_stores
Virtual Memory Information: ℹ️
 12.56 GB Free RAM
 2.53 GB Active RAM
 428 MB Inactive RAM
 1.66 GB Wired RAM
 1.04 GB Page-ins
 0 B Page-outs
Diagnostics Information: ℹ️
 Mar 31, 2015, 06:00:15 PM Self test - passed
 Mar 31, 2015, 01:13:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
 Mar 31, 2015, 01:05:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
 Mar 31, 2015, 12:24:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
 Mar 30, 2015, 05:45:38 PM /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
 Mar 30, 2015, 01:52:07 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
 Mar 29, 2015, 05:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
 Mar 29, 2015, 01:06:38 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
 Mar 29, 2015, 01:02:47 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
 Note: You will need an active Internet connection. I suggest using Ethernet
 if possible because it is three times faster than wireless.

Instance takes a long time to be actioned

Hi,
We are currently migrating to 10g from 5.7.
We found that some automatic activities (which usually takes seconds to process) are taking a long time to be processed. Some can take up to 5 hours. When we look at the Audit Trail, we can see the following:
Instance entered the activity - Admin Papi - 11-Feb-2011 14:00:00
Task Execution Start - - 11 Feb-2011 18:00:00
Task Completed - - 11-Feb-2011 18:00:00
The times set above are for example only but reflects current environment behaviour.
Can anyone please shed some lights on what may have caused this?
Thank you in advance.
Regards,
Joanna

It is a 2.0 Port, I know that. I was also thinking, maybe to get a Firewire/USB card instead and use Firewire because its much faster and I transfer videos frequently, which can be a gig right there sometimes. Also, keep in mind I'm using a cheap eMachines PC, and it doesn't always suppor added hardware. Like a couple months ago, I tried to replace the original CD drive with a CD Burner, and when I did the comp. wouldn't even boot up. So, yeah, it's a dumb off brand, keep that in mind.

Takes a long time to select a files when importing files

When I am selecting a files through the import function, it takes a long time (sometimes 5 minutes) for the computer to allow a file to be selected. I have just reformat the drives and did a fresh install of all application. I am running OS 10.4.4 on a G5 2.7. This happens irregardless whether I am selecting a file on an external drive (Firewire 800) or internal drive. Any clue, anyone? please help. Thanks

What are you importing?
Shane

Hi i insttalled the free trial 3O days MacScan on OsX10.5 is it normal that for full scaning it takes so long time more even than one day?! on the other hand this application hasn't any uninstaller on image disc ,so how can i uninstal it from my hard?

Hi i insttalled the free trial 3O days MacScan on OsX10.5 is it normal that for full scaning it takes so long time more even than one day?! on the other hand this application hasn't any uninstaller on image disc ,so how can i uninstal it from my hard?Thanks

Get rid of the tracking cookies. They are used to profile and track your browsing history. While they are privacy invading, by calling them spyware, MacScan is being a little dramatic in trying to sell you its crap. And in the future, for whatever browser you use, don't allow third-party cookies.
To prevent tracking, get Ghostery. In addition to having Ghostery and forbidding third-party cookies, I clear out all cookies from one browsing session to another. If you always do that, you won't have any tracking cookies to worry about, so you won't need MacScan to find them for you. Btw, MacScan finds the tracking cookies in the first few minutes of scanning; if you want to use it for that, then that's all the time you need to run it for. But, as I said, you won't have any tracking cookies around if you just remove all cookies and don't allow third-party cookies. As soon as you visit a site that needs them, you'll just get new ones. No problem.
Read all about cookies here.
http://en.wikipedia.org/wiki/HTTP_cookie

My mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen. After logon, it takes very long time to load any application. pls help

my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen. After logon, it takes very long time to load any application. pls help

OK. If you believe that.
When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
I tell you those are the signs of a disk that is about to die.
Allan

Deploying application takes a long time

Deploying en exploded EAR takes unually long time and thread
dumps and directory listings show that WebLogic
1. jars whole app in it's internal folder
2. unjars ear it just created back to the exploded form
Dimitri

Hi James,
Thank You for your suggestion. I have some doubts.
1) You suggested to revert back to old parameter and restart jDEV. What is the parameter i need to revert? I have only changed the max,min and perm size in opmn.xml because I keep getting perm gen error quite often. Did you mean those parameters ?
2)Restarting jDev will solve the issue of longer deployment time for applications. But when I restart the SOA itself, it fails to start.I get the Time out error. On removing the application which took longer time to deploy from server.xml, SOA starts without error. No other changes have been made. So the question is why is the application which is successfully deployed from jdeveloper like many other applications stopping the SOA to start.?
3)Or is the load during SOA startup is high, which results in it failing to start? If so how can I overcome this issue.
Thanks,
Ananth
Edited by: user8655700 on Sep 14, 2009 10:25 PM

Export Import Client take a long time

HI, Gurus
I export client PRD to QAS by T-Code: SCC8 , background is finish spend time 15 Hours and then 
import at target client by STMS take a long time, now is over 20 hourse but status is running. 
database on QAS is growth 30%
I saw log 
/usr/sap/trans/log/PRDET00021.PRD 
at 10 last row 
4 ETW000 0 entries from RFIDPTPRVAL exported (900*). 
4 ETW679 end export of "R3TRTABURFIDPTPRVAL". 
3 ETW678Xstart export of "R3TRTABURFRR" ...
3WETW206 scrap char 0x0000 found in RFRR.โu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20AC
 1AETP000 R3trans received signal 11 from operating system. 
2EETP200 Export with errors, request will not be imported 
1 ETP150 MAIN EXPORT 
1 ETP110 end date and time : "20100127161434" 
1 ETP111 exit code : "13" 
1 ETP199 ###################################### 
how i can do ?.
stop transport , resolve and new export ?
or wait for finish transport.
PRD system is ECC 6.0 database size 243 GB ( 2 Client 800 is Pre-Production and 900 is Production) 
OS: Solaris RAM 64GB 
QAS ECC 6.0 OS: Solaris RAM: 16 G 
Thank for advise.

Hi,
do you still see the entry:
usr/sap/trans/log/PRDET00021.PRD
at 10 last row
4 ETW000 0 entries from RFIDPTPRVAL exported (900*).
4 ETW679 end export of "R3TRTABURFIDPTPRVAL".
3 ETW678Xstart export of "R3TRTABURFRR" ...
3WETW206 scrap char 0x0000 found in RFRR.โu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20AC
1AETP000 R3trans received signal 11 from operating system.
2EETP200 Export with errors, request will not be imported
1 ETP150 MAIN EXPORT
1 ETP110 end date and time : "20100127161434"
1 ETP111 exit code : "13"
1 ETP199 ######################################
The signal 11 could indicate memoryproblems which are most likely to
appear when importing cluster or transparent table
A possible solution might be to delete the entries in the target client
before the import or otherwise to exclude the clustertable from the
client export and to transport it separately. Check note #68896 for more
information on these topics.
Table RFRR is a work table. Its content will be filled by the two
reports RFDRRGEN and RFKRRGEN (batch jobs) periodically. So you can
exclude the table from the transport. Please do it by using
 report RSCCEXPT (see note #70290 - see attachment).
After this you can start your export of the client.
If all is done, start the reports RFDRRGEN and RFKRRGEN to create the
table RFRR.
Note 718511 is also applicable here, you could clean up the scrap characters and then retry the export.
Kind regards,
Paul

Application build takes very long time

Recently building applications has started taking a very long time. Before, similar applications took 30 seconds or less for a build, but currently 5-10 minutes is not uncommon.
The perplexing part is how the time is distributed. The builder will spend 3-5 minutes each on the first two "processing" tasks it undertakes, namely:
Processing NI_AALPro.lvlib...
Processing NI_Gmath.lvlib...
Which amount for about 1% of the progress bar. Once it finished processing these two libraries, the final 99% finishes in about 3 seconds.
Has anyone run into this issue before? I suspect I've misplaced files for the two libraries causing the hangup and the builder is having to go searching for them, but I don't know how to remedy this situation. Any suggestions would be appreciated.

I find that when I include DAQmx in my build it can take up to 30 minutes to build an Installer. I have not seen this with builds that dont include DAQmx though.
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Takes a long time to load mlb website...and then slow to change from one place to another in the site...much quicker w. ie...any ideas on how to speed up? thanks drew

i know it has lots going on w/ videos etc but still is painstaking slow w/ firefox

Hi AquilaXXIII,
What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
update first,
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
Understanding Cluster Validation Tests: Storage
http://technet.microsoft.com/en-us/library/cc771259.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Aperture 3.1 takes incredibly long time to start

Since after the upgrade from 3.0.x to 3.1 Aperture takes a long time to start up. I click on the Aperture icon in the dock, the icon bounces for almost a minute, then it stays still for more than a minute, doing nothing and without the "light bulb" indicator that the app is running. It's just sitting there in the dock. After a total of 2-5 minutes, the Aperture window opens and I can start working.
I tried many things suggested in the forums to speed up Aperture:
I turned off Faces
I turned off sharing of previews with iLife and iWork
I turned off using embedded JPEGs from camera
I deleted all Aperture preferences as I thought there might be a corruption after upgrade
I removed all plugins from Aperture plugin folder to make sure nothing is interfering
I used the Aperture rebuild and repair options on the library
I created a new Aperture library and imported my photos from the old library into a fresh one
I downloaded and installed the Aperture 3.1 update again to make sure nothing got corrupted during update installation
Nothing helped. Aperture takes 2-3 minutes to fully start.
Plugins in use: NIK Software's Viveza 2 and HDR Efex Pro, Tiltshift for Aperture. That's it. And, as I said, it doesn't help if I take them out of Aperture's plugin folder so they don't get loaded. Problem still remains.
My library isn't that big: 29GB in 8230 items. Is 2-3 minutes a normal startup time?
Has anyone experienced a similar problem after upgrading? As I literally exchanged everything underneath Aperture (deleted preference files, created new library and imported photos from old lib) I don't know what else I could try. Totally uninstall Aperture and re-install it again?
Any suggestions what this could be?
On a sidenote, interestingly Logic Pro takes about the same amount of time to start. The icon bounces in the dock for almost 1 minute, then I hear the harddisk working for another minute until the splash screen finally appears. Logic Pro is loaded after 2 minutes and 20 seconds. I could boot my whole Mac 4x in that timeframe.

To everybody having this problem. I found out what the culprit was. As a documentation here is what it was.
I read some posts here on the forums that mounted USB sticks or flash cards would make Aperture super slow while importing photos. I have Boot Camp installed and have a Windows 7 partition on the same drive as my MacOS. So, out of curiosity, I forced it to unmount as the partition automatically gets mounted by the OS.
Voilà! That seems to have been the culprit! Now both Aperture and Logic (which also had to think 2 minutes before it decided to start) display the splash screen in seconds and start like they are supposed to.
Make sure you have no drives mounted when starting these applications. This helped bringing down the starting time from 2 minutes and 20 seconds to just a few seconds. Of course, if you have your library on another drive you have to have it mounted. Maybe it only takes so long when you have Boot Camp and an NTFS partition. But if you experience lags starting these apps, try unmounting what you don't need.

New LUN Takes A long Time To Format and Errors Out

Good afternoon,<o:p></o:p>
I have a Hyper-V Cluster composed of 4 nodes and these nodes are able to access multiple CSVs (14 in total). I recently requested a new LUN (LUN 15)to be provisioned
to my Hyper-V cluster in the size of 500GB. Here is my problem:<o:p></o:p>
1. Formatting of a 500GB LUN (with quick format selected) should not take more than a few seconds. Instead, the quick format takes about 2hrs if not longer. I have actually
seen it go for half the day.<o:p></o:p>
2. Once the formatting has completed (no errors), taking the formatted LUN offline freezes the Computer Management screen and shows the status (Not Responding). This
will take place for 30 minutes or less and show that the LUN has been taken offline.<o:p></o:p>
3. In the Failover Cluster Manager, detecting the disks takes about 15 minutes. Once the available LUNs have been detected I can add the 500GB LUN to the Disks screen
without any problems.<o:p></o:p>
4. While in the Disks screen, adding the LUN to the Clustered Shared Volumes takes about 5 minutes (too long).<o:p></o:p>
Already seeing that there is a problem, I went ahead and used the Hyper-V Manager to create a 200GB vhd on the new LUN which has been added to the CSV. The bar indicating
the progress of the vhd creation does not display any progress (no green progress bar appears, not even a tiny bit of it) and after 3 hours (more or less) I receive an error, stating that the creation of the vhd failed.
<o:p>NOTE: The vhd shows up in Volume 9 (LUN 15) but I can only bet that it will not work, plus I would not want to work with a vhd file which failed during the
creation process.</o:p>
<o:p>Long story short, I repeated the above steps to see if that was a temporary problem, but it is not. The same problem occurs no matter which Hyper-V cluster
node the operations are performed on. I would like to add, that I tested the creation of a vhd on an already configured LUN and the creation was completed successfully, and within a n expected time frame.</o:p>
NOTE: When LUN 15 errors out, it's status shows "Failed" in the Failover Cluster Manager. This in turn, causes the re-scanning of available disks to take forever (in Computer Management) and it keeps searching. Pretty
much, the fail of one LUN affects the entire functionality of the entire Hyper-V Cluster.
Errors Listed In Event Details For LUN 15:
1. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer accessible from this cluster node because of error 'ERROR_TIMEOUT(1460)'. Please troubleshoot this node's connectivity to the storage device and
network connectivity.
Event ID: 5142; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
2. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer available on this node because of 'STATUS_IO_TIMEOUT(c00000b5)'. All I/O will temporarily be queued until a path to the volume is reestablished.
Event ID: 5120; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
3.Cluster resource 'Cluster Disk 5' of type 'Physical Disk' in clustered role '4530acc9-8552-4696-b6c3-636ff8d58c46' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover
Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event ID: 1069; Source: Microsoft-Windows Failover Clustering;Task Category: Resource Control Manager
4.
Cluster resource 'Cluster Disk 5' (resource type 'Physical Disk', DLL 'clusres.dll') did not respond to a request in a timely fashion. Cluster health detection will attempt to automatically recover by terminating the Resource Hosting Subsystem (RHS)
process running this resource. This may affect other resources hosted in the same RHS process. The resources will then be restarted.
The suspect resource 'Cluster Disk 5' will be marked to run in an isolated RHS process to avoid impacting multiple resources in the event that this resource failure occurs again. Please ensure services, applications, or underlying infrastructure
(such as storage or networking) associated with the suspect resource is functioning properly.
Event ID: 1230; Source: Microsoft-Windows FailoverClustering;Task Category: Resource Control Manager
Any and all help will be appreciated!

Hi AquilaXXIII,
What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
update first,
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
Understanding Cluster Validation Tests: Storage
http://technet.microsoft.com/en-us/library/cc771259.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Discoverer take a long time executing reports

Hi
I have installed Discoverer with Application Server 10g R2 (both). I create my reports from a table but when i want to update my information in the Oracle Portal (executing a discoverer report with parameters) but it take a long time (up 2 or 3 minutes) the query is on one fact table with 4 or 5 FK.
Somebody has an idea why?
I have 2 server (one to OAS and another for Discoverer) the first with 1 GB RAM and the 2nd with 2 GB.
i dont believe that the problem is with my database.
Thank's a lot

Hello,
The issue is the reports are still looking for the original server because that server name is saved in the report file. You'll have to open each report up and do a Set Location to the new report. You'll need the same version of the REport Designer the reports were created in.
I suggest to call Dynamics and ask them how to update the reports.
Thank you
Don

Patch R12 on T4 engine takes a long time

Hi All,
I have patched R12 64bit (patch 8919491) on T4-1 machine takes a long time (not completed after 40 hours).
ram 16, sga 2g, another init.ora I set default, idle cpu concumption 99%
message alert.log : Incremental checkpoint up to RBA [0x3.1afee1.0], current log tail at RBA [0x3.1aff77.0]
please help

Hi Husein,
Thank you for your help.
I run adpatch as instruction on Readme.txt 8919491.
here are status 16 of workers:
96 -rw-r--r-- 1 oradev dba 48423 May 9 07:06 adwork004.log
134 -rw-r--r-- 1 oradev dba 67870 May 9 07:04 adwork007.log
148 -rw-r--r-- 1 oradev dba 74786 May 9 07:04 adwork005.log
124 -rw-r--r-- 1 oradev dba 63411 May 9 07:04 adwork008.log
54 -rw-r--r-- 1 oradev dba 27221 May 8 21:00 adwork002.log
162 -rw-r--r-- 1 oradev dba 82239 May 8 21:00 adwork003.log
224 -rw-r--r-- 1 oradev dba 102927 May 8 21:00 adwork001.log
16 -rw-r--r-- 1 oradev dba 7809 May 8 21:00 adwork012.log
14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork014.log
14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork013.log
20 -rw-r--r-- 1 oradev dba 9746 May 8 21:00 adwork011.log
14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork015.log
20 -rw-r--r-- 1 oradev dba 10140 May 8 21:00 adwork010.log
68 -rw-r--r-- 1 oradev dba 34358 May 8 21:00 adwork006.log
22 -rw-r--r-- 1 oradev dba 10493 May 8 21:00 adwork009.log
14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork016.log
I'll send you 2 workers status are adwork004.log and adwork016.log:
1. adwork004.log :
The Index in xdf-file and db match perfectly. No alteration necessary.
Index WF_USER_ROLE_ASSIGNMENTS_N3 exists under APPLSYS schema.
Checking for differences
Column_name and Uniqueness match for both file and DB Indexes
The Index in xdf-file and db match perfectly. No alteration necessary.
Index WF_USER_ROLE_ASSIGNMENTS_N4 does not exist in APPLSYS.
Skipping the creation of index WF_USER_ROLE_ASSIGNMENTS_N4 in current mode.
Index WF_USER_ROLE_ASSIGNMENTS_U1 exists under APPLSYS schema.
Checking for differences
Column_name and Uniqueness match for both file and DB Indexes
The Index in xdf-file and db match perfectly. No alteration necessary.
Performing AOL meta data updates
Attempting to update fnd tablespace meta data
Upload of Fnd_Object_Tablespaces is successful
AOL metadata updated successfully.
==========================================================
Done calling the utility function. Return Code = [0] TimeStamp = [Wed May 08 21:01:01 WIT 2013]
Updating task with status 0
Time when worker completed job: Wed May 08 2013 21:01:01
AdjavaWorker has reached the maximum wait timeout specified( 36000000 ). So Exiting.
2. adwork016.log :
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/oracle/oradev/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/oracle/oradev/apps/apps_st/comn/java/lib/appsborg.zip:/u01/oracle/oradev/apps/tech_st/10.1.2/forms/java:/u01/oracle/oradev/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/oracle/oradev/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/oracle/oradev/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/oracle/oradev/apps/apps_st/comn/java/classes"
Calling /u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.sql.SQLException: The Network Adapter could not establish the connection
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at oracle.apps.ad.worker.AdJavaWorker.getAppsConnection(AdJavaWorker.java:1041)
at oracle.apps.ad.worker.AdJavaWorker.main(AdJavaWorker.java:276)
Caused by: oracle.net.ns.NetException: The Network Adapter could not establish the connection
at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
at oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
It's mean my machine is not enought for 16 workers ?
please help

Macbook takes a long time to recognize power soure

Hello,
I have a MacBook running 10.6.8 that is exhibiting some strange behavior in regards to the power source. When I plug the power cord in it takes a while, sometimes as long as 3 minutes to recognize that it the computer is no longer running on battery anymore. Similarly it takes a long time to realize it's no longer running via a power cord when I remove the power cord from the machine. In all cases it eventually catches up and makes the proper switch, but I'm a bit concerned as this behavior is relatively new. I've tried swapping out power cords and it doesn't make any difference. I only have one user on the machine but could create a test account and try to see if this behavior is account specific if someone things that is worthwhile. Another thing to note, I believe the battery level indicator is correct, because often when it catches up after I've inserted the power cord the percent full jumps a couple of digits, as if it'd been charging for a while. Does anyone have any thoughts or ideas that I could try to remedy this? So far, I've really only tried repairing disk permissions as I've never seen an issue like this before. Thanks.
-NifflerX

How long is "forever"?
Create a new user account. Log out of the original and into the new one, then put the machine to sleep. Any changes?
~Lyssa

Import of Apex Application to another instance takes a long time

Similar Messages

Maybe you are looking for