Import of bank file

Hi all,
In the program FF_5, when i tried to upload the bank file, the system giving this message:
House bank table: no entry with bank key and acct 79232009.
and in FI12 i checked the bank, the bank details key is assigned. from where it is taking this? i pressed the F1 help, then the following message is coming.
Diagnosis
The house bank tables (T012 and T012K) did not have an entry with bank
    key and account number 79232009.
Procedure
Maintain the house bank tables.
how to resolve this problem?
Soma

House bank table: No entry with bank key and acct 79232009
Message no. FB736
Diagnosis
The house bank tables (T012 and T012K) did not have an entry with bank
    key and account number 79232009.
Procedure
Maintain the house bank tables.

Similar Messages

I wish to import a Bank csv file into my numbers spreadsheet but all of it goes into one column which I can't separate

I wish to import a csv file from my Bank into a numbers spreadsheet but I can't expand it from the one column it's in . Can anybody help Thankyou

This Automator Service (Dropbox download) should do the job, eliminating the need for a trip to TextEdit, etc.
The one-time installation is simple: just doubleclick the .workflow package. You may have to click "Download Anyway" in System Preferences > Privacy & Security.
To use, in Finder select the csv file, rightclick, and in Services in the contextual menu select CSV to Tabs on Clipboard. Choose the delimiter when prompted (usually it's a comma but there are other choices). When the "ready to paste" notification appears a few seconds later, click once in a Numbers cell and command-v to paste the data. (If needed Numbers will automatically expand the table to accommodate the data.)
To remove or rename the Service, in Finder hold down the option key and in the menu Go > Library > Services.
SG

Error: Imported bank file format does not correspond to selected format

Hi All,
I am trying to execute FF.5 transaction - Import Electronic Bank Statement - for brazilian bank (Banco do Brasil) but I got an error message no. 8B795 (Imported bank file format does not correspond to selected format), I tried format B (Cobrança/pagar itau) and 1 (Cobrança/pagar bradesco).
The file that I am trying to upload has 400 positions.
Does anyone know which format I should to use?
Regards,
Daniel

Hello,
In my case our bank was sending us a file using the version 085, while we were waiting for one of those: 030, 040, 050, 084 or 087.
Now they will send these files using the version 087.
Thank you!
Caio.

Import External Bank Statement in SAP B1 Patch level 34

Hi all,
How do we do External reconciliation in SAP B1 2005. How to Import External Bank statement in to SAP B1 2005.
Regards
Shashi

Procedure
       1.      In SAP Business One, choose Banking - Bank Statements
and Reconciliations - Process External Bank Statement. The Process
External Bank Statement window opens.
       2.      In G/L Account, enter the appropriate G/L account number
and choose TAB.
       3.      Choose Bank File to start the import.
A file browser appears allowing you to choose a folder.
       4.      Open the appropriate folder and select the required bank
file.
Payment Engine uploads the file as a test run. On the Protocol tab page
of the Payment Engine window, the system displays the result of the test
run. If error messages are displayed here, go back in the process,
correct the errors and start a new test run.
If error messages are visible in the log file you are not able to store
the data in the external bank statement table OBNK.. Check the following
        Check that your bank file format is correct
       In the Chart of Account, check to see if the Type Input file
is correct (user-defined field).
       5.      If no error messages are displayed on the Protocol tab,
choose the Preview tab to view a preview of the run. You can switch
between bank and accounting view using the radio buttons.
       6.      Now you can start a production run. To do so, choose
Production Run and OK. The output data will be stored in the external
bank statement OBNK. After a successful run, the system informs you that
the bank statement was imported successfully.
Choose the Bank File tab to check that your file has been imported. You
can also find status information in the log file.
Regards,
Eleven

Payment Wizard - Export Bank File

Hi Experts,
I have been testing the Payment Wizard for my client to use when they have a batch of Suppliers to pay.
But I seem to have a problem in Step 9 of 9.
The payment wizard creates the payments but the Export Bank file tab does not want to export to any location that I select.
Am I doing something wrong or leaving something out?
My goal is to create and post all the payments in SAP, and then export that payment batch that I just executed in order to import into another application called Cashfocus.
Thank you.
Regards,

Hi
We have worked extensively with the Payment Engine and there are a number of things that may caused this problem. Can you confirm as to whether a path is selected on step 9 and that write access is granted to this path/folder.
Regards
Earl

How to import a csv file without "+" being added to numbers?

I'm trying to import a csv file from my bank. Numbers automatically adds a "+" and "-" sign before all numbers. Numbers won't add the numbers with a + sign. How can I easily remove the + sign? It seems the delimiter in the csv file may be ", rather than , Thanks.

Wayne,
I don't believe that the plus sign came from Numbers. Except for a purposful application of a Custom Format, Numbers isn't going to add the plue sign. The minus sign is another issue. It's a perfectly acceptable part of the value and shouldn't cause a problem.
If the plus sign came from the CSV file, which you seem to imply isn't the case, you would have to strip it out before submitting to Numbers.
Jerry

SAPBPBEOPBT_PIBDTA bank file not correct

When you create bank file using the format SAPBPBEOPBT_PIBDTA following content can be observed in Record Type 0:
00 0703051100001030511 000000123456711DB&S bvba
8650 HOUTHULST            BELGM                     0          5
Here we can see that a carriage return (C/R) is posted before the ZIP-code 8650 in second line and the bank file can not be imported on the side of bank.
One of the root cause can be found in settings of Address Formats. In this case was used Address Format Standaardadres (Europa).
To create a correct bank file using format SAPBPBEOPBT_PIBDTA the Address Format should be changed via Administration->Setup->Business Partners->Countries->field Address Format. Change it to "Netherland". Then the content of created bank file will be following:
00 0703051100001030511 000000123456711DB&S bvba                 8650 HOUTHULST            BELGM                     0          5
The Record Type 0 is now correct.

Hi Experts,
   I am completed APP (F110) then Iu2019m downloaded SEPA XML Format from FDTA (Transaction Code). SEPA XML File uploaded in Bank Portal. Bank Portal given message as below.
1.     This file is not a valid SEPA XML file
2.     Mistake in line 1, column 158: Unknown element u201CDocumentu201D.
Please suggest me how I should find the line one, column 158 in SEPA XML File.
I will appreciate your help.
Regards,
Surendra.

Is the import of bank statements possible in Business One US Localization.

Is the import of bank account statements (file format OFX) possible into the localized US version of SBO?

Hi Alain,
neither BSP, FD, BTHF or the payment engine (C&B) are supported for the US localisation for versions 2007 or 8.8 according to the product availability matrix.
You might explore whether DTW could be used, but I would recommend you contact SAP US local field.
All the best,
Kerstin

I would like to combine multiple profiles into a new computer. Which are the most important folder or files to migrate?

The user profile in my old computer somehow became corrupted and I can no longer access it to log on. Unfortunately I was not aware of the Firefox sync feature at the time. I used a new profile and had to start from scratch to save new bookmarks and extensions/plugins. I did set up Firefox sync for this new profile. Now I have a brand new computer and desire to migrate the bookmarks to this new computer, including the original bookmarks in the old computer, as well as the bookmarks in the second profile. While I have located the profiles folder for each profile in my old computer (as well as extensions and plugin folders), the content of this folder is daunting. I would like to know which are the minimal folders I should select to migrate and would it be safe to simply copy and paste over the entire folder? Please note that I have also added new bookmarks into my new computer which I would not like erased. I hope these details are not convoluted.

Firefox has two methods of bringing in bookmarks from another Firefox profile:
* Restore a backup (JSON files in the bookmarkbackups folder): this completely replaces what you have, so is not the first step
* Import from an HTML file: this is additive and will create an Imported Bookmarks folder or add them under Unsorted Bookmarks
Restore is best if you tag your bookmarks because the JSON format preserves tags. If tags are not important, then it's easier.
What I suggest is:
(1) Export your current bookmarks to the HTML format; you can reimport these later. See: [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]. Open the file in Firefox (it's a web page) to make sure it looks complete before proceed.
Next, get the bookmarkbackups folders from each of your old profiles that you want to restore, and look for the most-complete-looking JSON files (they will have the most recent dates and largest number of bookmarks indicated in the file name). Proceed from the smallest set to the largest, or oldest to newest; basically, restore the most important one last.
(2) Restore a backup, then export to HTML. This article has the steps for a restore: [[Restore bookmarks from backup or move them to another computer]]. Then export to HTML and check for completeness.
(3) Repeat #2 until you get to the last/most important restore. You don't need to export that one.
(4) Import the HTML files you've made throughout the process.
(5) In the Library dialog, reorganize. Firefox doesn't have a deduplicator, but you might find one or more extensions to do the job on the Add-ons site if you find a lot of overlap.
Make sense?

Error while importing a dump file in Oracle 10g R1

Hi all,
While trying to import a schema using Data Dump, I am facing the following issue -
UDI-00018 - Import utility version can not be more recent than the Data Dump server.
Following is the version information of the source and target DB and the utilities :
Source DB server : 10.1.0.2.0
Export utility : 10.1.0.2.0
Import utility : 10.1.0.2.0
Target DB server : 10.1.0.2.0
Export utility : 10.2.0.1.0
Import utility : 10.2.0.1.0
I can figure out the cause for the problem, but don't know how to resolve it.
Any help will be appreciated.
Thanks in advance.
Gitika Khurana

How did you get thre DMP file created and how are you trying to import the dump file? Could you post the commands you're using, please?

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

Importing All the files from a folder at a time

Hi....
Can any body tell me how to import set of files from a folder into IDM.
It is becoming very difficult to import the files one after other....
Waiting for Reply....
Thanks in advance..........

We used an ant script to build an XML file that will contain the files. The script is configured to use the folder structure of our CVS repository.
We'd checkout our XML module and then run the build script and import the resulting init file.
Code to the script is below -- caveat emptor. You'll need to change the folder structure to suit your own environment.
<?xml version="1.0" encoding="UTF-8"?>
<project basedir="." default="all" name="MyInit">
    <target name="init">
        <property location="." name="src.dir"/>
        <property location="." name="dest.dir"/>
        <property name="project.name" value="${ant.project.name}"/>
        <property location="${dest.dir}/MyInit.xml" name="MyInit.output"/>
        <property name="source.configuration" value="${dest.dir}/configuration"/>
        <property name="source.emailTemplate" value="${dest.dir}/emailTemplate"/>
        <property name="source.forms" value="${dest.dir}/forms"/>
        <property name="source.reports" value="${dest.dir}/reports"/>
        <property name="source.resource" value="${dest.dir}/resource"/>
        <property name="source.rules" value="${dest.dir}/rules"/>
        <property name="source.workflow" value="${dest.dir}/workflow"/>
        
        <path id="configuration.path">
            <fileset dir="${source.configuration}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="cp" refid="configuration.path" />
         <path id="emailTemplate.path">
            <fileset dir="${source.emailTemplate}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="ep" refid="emailTemplate.path" />
         <path id="forms.path">
            <fileset dir="${source.forms}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="fp" refid="forms.path" />
        <path id="reports.path">
            <fileset dir="${source.reports}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rptp" refid="reports.path" />
        <path id="resource.path">
            <fileset dir="${source.resource}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rep" refid="resource.path" />
        <path id="rules.path">
            <fileset dir="${source.rules}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rp" refid="rules.path" />
        <path id="workflow.path">
            <fileset dir="${source.workflow}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="wp" refid="workflow.path" />
        
         <path id="source.path">
            <pathelement location="${src.dir}" />
         </path>
         <property name="sp" refid="source.path" />
    </target>
    <target depends="init" name="win_init">
        
        <property name="importfile.path" value="${sp}"/>
    </target>
    <target depends="init" name="make">
    
        <echo file="${MyInit.output}" append="false"><?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE Waveset PUBLIC 'waveset.dtd' 'waveset.dtd'>
<Waveset>
${cp}
${ep}
${fp}
${rptp}
${rp}
${wp}
</Waveset>
        </echo>
     
     <replace file="${MyInit.output}"
              token = "${sp}"
              value = "<ImportCommand name='include' file='${importfile.path}" />
     
     <replace file="${MyInit.output}"
              token = "${file.separator}"
              value = "/" />
    <replace file="${MyInit.output}"
              token = "${path.separator}"
              value = "${line.separator}" />
    <replace file="${MyInit.output}"
              token = ".xml"
              value = ".xml'/>" />
    </target>
    <target depends="init,win_init,clean,make" description="Build everything." name="all"/>
    <target depends="init" description="Clean all build products." name="clean">
        <delete file="${MyInit.output}"/>
    </target>
</project>

Importing Avid MXF Files to short in Premiere CC

Hi there,
We are importing AVID Media Files MXF from MXF Folder into Premiere Pro CC 2014 and the longer clips are to short. All the long clips ends at 4min. 55 sec.
We were exporting the Files from AVID 8.3.0 as AFF, then importing in Premiere CC 2014 and linking the video files to the MXF Folder of AVID.
We tried also to consolidate all the clips from AVID again into a special folder, make a new AFF export and then import and link all again. But it gives us the same result.
Would be great if anybody knows a solution. The problem seems to be the import of the MFX Files into Premiere CC. The Export from Avid seems to be OK.
Regards
Army

As Apple Inc.’s desktop and server operating system for Macintosh computers, OS X Mountain Lion (version 10.8) is the ninth major release of OS X. It’s quick, familiar, cheap, and drenched in iOS goodness. However, after updated and installed Mountain Lion on Mac, many Final Cut Pro (mainly FCP X and FCP 7) users found they could not import mts, mxf, ect files into FCP anymore.
You can try to redownload and reinstall the FCPX. If not, you can contact after-sales service to get a free way to solve the problem.
You also can ignore the problem and download and insatll a MXF Converter to convert MXF to FCP's antive format ProRes before importing. I have been using Brorsoft MXF Converter for Mac, it work fast and it can keep the original video quality for editing. Besides, the conversion process will help you to save the rendering time. The most important is that it has five types of Apple prores codecs for choosing.
http://www.brorsoft.com/mxf-converter-mac/index.html

When importing an MXF file from a CF card, I can only get :30 of the original clip. What am I doing wrong?

When importing MXF video file from a CF card to Final Cut 6, I can only import :30 of it. Why am I limited to :30 and how do I get the entire clip?

That's the WRONG WAY! You have to use Log and Transfer, like Michael says. Here's A tutorial on how to deal with Tapeless in FCP
<a href=http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1 target=_blank>Tapeless Workflow for FCP 7 Tutorial</a>
BUT NOTE! If this is MXF from a CANON camera...their new 305 camera...you not only need a plugin to get it to work (they either include it with the camera, or you have to go to the website... the Canon Log and Transfer plugin), it also might only work with FCP 7. Because the camera is brand spankin new. Try the plugin first...well, if this is from that Canon camera.

After I import a movie file from the camera memory card, Imovie 10.0.1 acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it worksnow? Thank you, Filippo

On IMac 10.9 After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now? Anyone know? Thanks, Filippo

I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
Thanks

Import of bank file

Similar Messages

Maybe you are looking for