Import of IDOC from R/3 to XI system

Hi All,
I created RFC destination, port and partner profile in R/3 system and RFC destination and Port in XI system and Remote Logon is working on both the systems. Now i want to import an IDOC from R/3 system SAPECC6 to XI system, there i got specify the Application Server, System Number Logon data to the R/3 system, but it give the error like i.e.
"Unable to establish connection to R/3 system SAPECC6 (system=01, client=200) Troubleshooting tips:
Is the target system online?
Check the connection data (note that server names and groups are case-sensitive)
Tips for administrators (see the configuration guide for more details):
Does the user have the required authorizations in the target system?
Is the target system configured correctly in "etc/services"?"
Any body came across this situation, Please send the solution asap.
Thanks & Regards,
Nagarjuna.

Hi nagarjuna,
1 . First check this at your R/3 System.
While logon window, check the
Client No
2 . Second, when you import, you will give the details like application server, system no, user name and password. But you can fine the client no is different at this place.
Please change the settings according to that and move ahead.
This problem happends some times, Its with the configuration.
Hope this will help you.
cheer,
Vinod V
**Reward, if found helpful

Similar Messages

Unable to send IDOCs from SAP PI 7.3 system to a NON-SAP system

Hi Experts,
We have a simple file to IDOC scenario in our SAP PI system. There is no mapping as the file is already in the IDOC-XML format.
However , the target system is a NON-SAP system. We are using a TCP/IP RFC destination to connect to it.
Here are the settings we have done,
1) Creates a 3rd party technical system and business system in SLD.
2) We have assigned a logical system name for the business system (LSKABA100).
3) Created a port in IDX1 with the same name LSKABA100 and assigned the TCP/IP RFC destination. The RFC destination is pinging fine.
4) Imported the metadata for the IDOC from a SAP port and copied the same to LSKABA100 port.
5) Created the sender agreement, receiver determination, interface determination and receiver agreement in ID.
When we send the file, there is an error on SM58 transaction of our PI system. It says "RFC_ERROR_SYSTEM_FAILURE: IDocException occurred."
Other than that it does not provide a lot of details.
We have seen this thread and this blog but did not get any break through.
Please help us, if someone has any ideas.
Best Regards,
Ravikanth Talagana

Hi all,
I am not using any SAP Jco user either in my config or in the RFC destination.
What is the user id that needs to have the authorization?
I am using a TCP/IP RFC destination and it does not have any user id/pwd.
There is also, no problem while doing a connection test to the RFC destination.
Best Regards,
Ravikanth Talagana

Problem: Import an IDoc from R/3

Hi,
I have some problems to import a simple IDoc...
In a 1st times, connection to R/3 is ok and I can select some idocs among the list, but after some clicks, I have the following error messages:
1. Problems to reach R3 System
2. Connection to server lost. System is logging you on again automatically Once logged on, repeat the action
[NDLR: this one of XI]
3. Problems to reach R3 System
Anybody can help me?
P.S : It's not my 1st Idoc import and between the last times and this one(3 months ago), there were mainly two changes: upgrading of XI from SP09 to SP11 and adding a domain name for each server objects (R/3 and XI).
Regards.
Mickael Huchet
Message was edited by: Mickael Huchet

Hi,
Did you check "Pre-requisites" section in this link:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
I think the connection from IB to the server is timing too soon for some reason. Contact your BASIS team about this problem. Also check whether there are any network issues.
Regards,
Sridhar

** Not able to import IDoc from SAP ECC system

Hi Friends,
I am not able to import the IDoc from SAP ECC system in IR. I have checked that, hostname, client, server no. everthing is correct. I checked in SLD also. Host Name is correct.
While import (after giving the user name and password), I am getting the following error.
Problems to reach R3 System
What could be the probelm ?
Kindly help me friends.
Thanking you.
Kind regards,
Jegathees P.

Hi,
Just counter check following step
1. Go to SWCV definition tab select radio button for Import of RFC....
2. In Connection Data for Import from SAP System maintain correct System and correct Client.
3. Make sure you maitain ECC system in Central SLD.
4. In Import Screen check at the top of the screen have SAP System, is that system from where you want to import the IDOC.
With Regards
Sunil

Importing an idoc with namespace extension gives strange XML tagnames in PI

Hello All,
We have created an extension to the ORDERS05 idoc in a namespace. The extension is called "/cclcl/zorders05", "/cclcl/" is the ABAP namespace. We want to use this Idoc in SAP PI and send the Idoc in XML format to a external party. The XML format of the Idoc is generated in SAP PI, when we import the idoc in the Enterprise Service Repository. The root element of the XML is being generated as <_-CCLCL_-ZORDERS05> (see idoc xml example below). The "/" characters are converted to "_-" and therefore the XML rootelement looks very strange. How can we use idoc extensions under a ABAP namespace and have normal rootelements in the idoc xml of SAP PI (without the "_-" characters)?
<?xml version="1.0" encoding="UTF-8"?>
<_-CCLCL_-ZORDERS05>
<IDOC BEGIN="">
<EDI_DC40 SEGMENT="">
<TABNAM/>
<MANDT/>
<DOCNUM/>
<DOCREL/>
<STATUS/>
<DIRECT/>
<OUTMOD/>
<SUNIT/>
<WAERQ/>
</E1EDS01>
</IDOC>
</_-CCLCL_-ZORDERS05>
Kind regards,
Mark

Hi, Mark van Dooren
I think i could not put the statement in proper manner in previous post ,i feel,
when u import a Idoc from an R/3 system,u will get the XML structure in which u will be haveing the '/' character
replaced by '_-'.
And when u use this XML structure(of Idoc) and export it to the external system,then the structure will be automatically converted into the normal XML structure in destination system.
This part u need not to take care externally.....
I hope i made my statement clear..

How to upload IDOCS from ERP to XI? Points guaranteed.

I want to upload ORDERS.ORDERS05 into XI(7.0)
Please give the detailed procedure to do this.
Thanks a lot! Points guaranteed.

> I want to upload ORDERS.ORDERS05 into XI(7.0)
> Please give the detailed procedure to do this.
>
> Thanks a lot! Points guaranteed.
Hi Jennifer -
Michal et al have already answered this question but I'll jump in with my version:
1) Login to the Integration Repository, select your Software Component (SWC)
2) Ensure that the RadioButton stating "Import of RFC and IDoc Intefaces from SAP System Permitted" is selected. See:
https://weblogs.sdn.sap.com/weblogs/images/297/jen_lee_import_idoc.jpg
3) Once the radio button is selected you should be able to import the IDOC (ORDERS.ORDERS05) to your XI system. See:
https://weblogs.sdn.sap.com/weblogs/images/297/jen_lee_import_idoc2.jpg
This is fine for practicing the mechanics of importing customer defined IDOC's or RFC's to your XI system. However, the ORDERS.ORDERS05 IDOC is officially supported and provided in the SAP APPL SWC. Please see the section in my blog ( /people/james.guanzon/blog/2006/02/22/how-to-support-industry-standards-in-xi-part-i-of-iii--interfaces )entitled SAP Interfaces to get the correct SP for your XI system.
Thanks for reading...
Good Luck!
james

Error while creating IDOC from payment run

Dear All,
I 've alredy done all EDI settings for creating IDOC from payment run. But system in not generating IDOC as end with a result as "House bank is not designated as a EDI Partner'.
Please suggest how to define house bank as a EDI partner.
Regards,
Subhash

From We20 u have to create the partner profile for the bank u r using in ur transaction. In we20 select the partner type B (Bank) and as Partner no give ur bank numbrer.
Regards,
Joy.

Help needed in transferring IDoc from SAP CRM to XI

Hi All,
We are facing an issue in sending an IDoc from SAP CRM to XI system. The IDoc is triggered and the status is showing as 03 in SAP CRM system(WE05 is used) but it is not getting replicated in XI System. This is verified by logging into XI System and cross checked the records retrieved by executing the transaction IDX5. No entry is found for this IDoc.
In SM58 transaction, it is giving the status text as EDISDEF:Port SAPRIO segment defn E201CRMXIF_BILLI.
Any pointers on this issues will be very helpful. We are able to send information from XI to CRM.
The project is an upgrade one and the IDocs are developed earlier and were working fine one week back and no changes were made recently.
Thanks,
Udaya

Hi Kapil,
Thanks a lot for your help. We need to delete and recreate Metadata. This is a typical problem that is encountered during upgrade projects.
Thanks,
Udaya

Error to send a IDOC from ECC to SUS

Hi,
I am trying to connect to SAP SUS System using HTTP adapter using PI 7.0.The scenario is
ECC ->PI->SAP SRM. I have configured HTTP adapter as the receiver with addressing type as HTTP Destination. I have created a RFC destination of type H pointing to SAP SUS on PI. I have encountered the following error after executing the scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have configured HTTP receiver with Addressing type HTTP Destination and configured the HTTP destination field with RFC destination(Connection Type H) created on PI. Here my source and target structures are same i.e DELVRY03. I have triggered DELVRY03 idoc from ECC and i am expecting same xml to be sent to SAP SUS but stuck up with the above mentioned error.
Someone know how fix this problem?
Tks,
Erik

HI,
As per my understanding to your scenario, You want to send one IDoc from ECC to SAP SUS system using SAP PI.
So i hope you must have configured on all the steps required to Send one IDoc to PI syste, Secondly, are you using any Standard interface in PI to send data to SAP SUS system? If yes, you need to create an HTTP Destination for that system and then you have to create XI Receiver Adapter with that HTTP destination to post incoming message to SAP SUS system.
Your error suggests you are using Plain HTTP adapter to post data to SAP SUS, which is in my understanding is incorrect.
Regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 21, 2011 9:15 AM

Import IDoc from SAP R/3 3.1I to ESR

Hi experts
For the import of RFC and IDoc structures the SAP Backend needs SAP Release 4.0 and higher.
But I have the requirement to import an Z-IDoc from an SAP R/3 3.1I to the PI-ESR.
Is there any way to do this?
Thx
Tobias

As there any other R/3 system in your landscape to transport the RFC or IDOC to and upload from there?
The interface needs not to be uploaded from the same system as processed later.
But you cannot use PI for this, as the target system for RFC or IDoc and the system to upload the metadata must be both unicode or both non-unicode.

Unable to import IDoc from ECC to PI 7.1(ESR)

Hi,
I am creating an IDoc to File scenario in PI7.1 . I am trying to import the MATMAS IDoc from ECC to PI 7.1.So under the SWCV -> Imported Objects - > Wizard to import IDod/RFC opens -> I enter the ECC system login details -> But when I expand the IDoc node here,I find no IDoc from ECC ,moreover it throws me an error " component should be attached to some frame or dialog"
Can you please suggest me as what is going wrong.
Thanks,
Venu

Hi all,
I am using PI 7.3
When I Import object and passing parameter like application server, system number, uid and password.
I got this error
Unable to establish connection to R/3 system servertm_TM9_06 (system=00, client=001)
Troubleshooting information:
Is the target system online?
Check the connection data; server name and group fields are case-sensitive
Tips for administrators (see configuration guide for details):
Does the user have sufficient authorization in the target system?
Is the target system configured correctly in etc/services?
See error logs for details
Please help me.

Unable to Import Idoc from R/3 System.

Hi,
I am facing an error while importing Idoc (SERDAT.SEERDAT01) from 4.6c R/3 system, the errror is "unable to read the segments" and the same Idoc I am able to import successfully from ECC6 system. Please let the solution for the same.
Thanks & Regards,
Pragathi.

check if you have the proper authorizations
From Note: 837595
Authorization object S_RFC
Field name RFC_TYPE value FUGR
Field name RFC_NAME value EDIMEXT, SDTX
Field name ACTVT    value 16
Authorization object S_IDOCDEFT
Field name ACTVT   value 03
Field name EDI_CIM value ' '
Field name EDI_DOC value TXTRAW01
Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
Field name ACTVT      value 03
Field name DICBERCLS value

Is it Possible to import an IDoc type from R/3 into APO system

Hi Gurus ,
Could you please guide if we can import an IDoc type from R/3 system to APO system ?? If yes , can you please give the guidelines / step - by - step procedure for this.
Thanks in advance ,
Roseline

hi
yes u can export an idoc from r/3 to a legacy system.
the brief outline is as follows:
1. set up an rfc connection. it has to be 'T' type in t-code sm59
configure the saprfc.ini file if on windows based os. if on unix based os configure rfcexec.c to have the login details of apo system.
2.set up logical systems( at least 1 each for r/3 and apo) using T-code SALE.
3.assign clients to the logical sytems using T-code SALE..
4.create ports using tcode we20.
5. create idoc segments using we30 and release.
6. create idoc type using we31.
7. create message type using we81.
8. assign message to idoc using we82.
9.build a customer model using tcode bd64.
10. create an outbound process code usint tcode we41.
it will help if you specify your idoc that you want to use- for vendor, customer and material there are predefined distributions and idocs.
Thanks.

How we can import an IDOC structure from one SAP system to another w/o ALE

Hi Gurus,
How we can import an IDOC structure from one SAP system to another? we're not able to use ALE tech, these two sap systems are isolated.
Any response will be awarded!
Thanks a lot.
Samson

hi,
1.One is by change pointer concept i.e by executing the RBDMIDOC.We can generate the idoc and automatically to the inbound System.
2.By executable program also like bd10 and bd11.
Regards,
SHIVA(reward if helpful).

How we can import an IDOC structure from one SAP system to another

Hi Gurus,
How we can import an IDOC structure from one SAP system to another? If we're using ALE, how can we do that? Please can someone give me the process and necessary t codes.
Any response will be awarded!
Thanks a lot.
Samson

hi!
Define the logical system names in both the systems.
Logical system names :SAP001
SAP002
SAP001 FOR 001 CLIENT
SAP002 FOR 002 CLIENT
These two logical system definitions should be present in both the systems.
Assign the logical systems to the client. (in both the systems)
Assign SAP001 to 001 CLIENT
Assign SAP002 to 002 CLIENT
you can See these in transaction SALE.
After this define the rfc DESTINATION IN sm59. (in both the systems)
In 001 client create the RFC destination name SAP002
In the tab log on security, give the user name and password and client of the 002 client and save it.
Similarly do the reverse in the 002 Client.
In 001 client create the port.(Transaction WE21)
Specify the RFC destination name as SAP002.
Now you can define the ports, (both the systems)
Create the partner profile for partner(ie gve logical system name of partner) , so give as SAP002.
partner profile in both the systems.
Now create the distribution model in BD64 and goto edit>model view>distribute.
The same model view will be visible n distributed to the partner system also..which in this case is sap002.
U may trigger the idoc from we19 and chk its status in we05.
Please let me know if you need further info on this.

Import of IDOC from R/3 to XI system

Similar Messages

Maybe you are looking for