Import of Keynote 09 version fails

Hi,
I recently bought the keynote app for the ipad hoping that the ipad would replace my laptop with me on my conference trips. I have as yet been unable to import a keynote 09 file from itunes (9.1.1 (12)). My presentations tend to be quite large in size (~16MB) can the ipad not handle the size. There is no audio or movies in this presentation.
Any help would be appreciated. I have copied a zipped version of the slides to
http://brew-desktop.ucd.ie/thesis_presentation.key.zip
If that helps to pin the problem down or for apple to find a bug fix.

Similar Messages

PSQ Import in Premiere Pro CC fails

Hello,
I noticed that PSQ (Adobe Premiere 6 Storyboard) file import in Premiere Pro CC fails with a General Importer Error, although it's officially supported as stated in the manual (http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html). Import in CS6 works without problems. I already submitted a bug report.
Since I'm using this feature quite a lot - it'd be great to have this working again asap.
Can you please help and fix this?
Thanks a lot!

Hi Jack,
Please check the below Forum thread and roll back to the Initial version 7.0 of Premiere Pro CC. You can choose to update Premiere Pro CC to the desired version from the below links.
http://forums.adobe.com/message/5827476
Updates:
For MAC:
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Macintosh
For Windows:
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows
Regards,
Vinay

How do I transfer my play lists from one pc to another? I can't find import on the new version.

How do I transfer my play lists from one pc to another? I can't find import on the new version.

Holtey wrote:
Not an option.
Onlly have turn on home sharing or get artwork
Do ou have the iTunes menus showing across the top of the iTunes window?
ctrl B

Switch version fail. CCX 8.5.1SU4 - 9.0.2

Hey All.
When i try to switch-version from version 8.5.1su4 to 9.0.2 then after app. 30 min, the cli says "Sync after switch version failed" and then stops.
I have tried to reinstall the 9.02 on the inactive partion, but still the same issue. all network connectivity (DNs, NTP etc.) is running så they should not be any network issue that causes this.
I have also tried to force a switch-version thru the recovery CD, and the swtich version goes ok, and the 9.02 comes up, but no services will start (Waited 45 min - and monitor the utils services list on the console)... so im back on 8.51su4.
Installation is on vmware version 5.0 and is SA
On the console, i can se 1 error in the startup,
But the interface is actually answering from remote.
Anyone have any idea what i could be??
(the refresh file was install before the the upgrade file...)
Best Regards
Thomas Johannesen

Hey Aaron
Here is the log files.
As i can se in the files it comes with this error :
WARNING: server initialization failed, or possibly timed out (if -w was used).
Check the message log, online.log, for errors.
2013-01-28 12:40:30,501 - uccxdb.util - CRITICAL - Error in executing the cmd [su -c 'source /opt/cisco/uccx/bin/uccx_ids.env ; oninit -wyv' informix], retCode [1]
Mon Jan 28 12:40:30 CET 2013 :: Error while installing files for UCCX DB instance
Mon Jan 28 12:40:30 CET 2013 :: -------------------------------------------------------------------
Mon Jan 28 12:40:30 CET 2013 :: Moving sysadmin db to sadmin dbspace
Mon Jan 28 12:40:30 CET 2013 :: sadmin_exist 2
Mon Jan 28 12:40:30 CET 2013 :: Moving sysadmin database
1809: Server rejected the connection.
Mon Jan 28 12:41:00 CET 2013 :: Error moving sysadmin DB
Mon Jan 28 12:41:00 CET 2013 :: Stopping DB
Mon Jan 28 12:41:00 CET 2013 :: ------Stopping uccx database-------
Mon Jan 28 12:41:05 CET 2013 :: Waiting for port to be released
Mon Jan 28 12:41:05 CET 2013 :: The port is released
Mon Jan 28 12:41:05 CET 2013 :: ------UCCX database stopped--------
Mon Jan 28 12:41:05 CET 2013 :: DB upgrade script failed
Mon Jan 28 12:41:05 CET 2013 :: Restoring repicaition status of the databse
At least two servers must be defined for replication.
The requested operation will not be performed.
Mon Jan 28 12:41:05 CET 2013 :: ./uccx_sv_db.sh 8.5.1.11004-25 9.0.2.10000-71 8.5.1.11004 rpmdb: Program version 4.2 doesn't match environment version error: db4 error(22) from dbenv->open: Invalid argument error: cannot open Packages index using db3 - Invalid argument (22) error: cannot open Packages database in /partB/var/lib/rpm package UCCX02_lib is not installed /var/log/active/platform/log/cli.log
Script uccx_sv_db.sh failed with exit code 255.
in the uccx_install.log file. and after that i runs the rollback script.
Have no idea why this error is showing.
Best regards
Thomas

Weblogic Server 6.1 trial version fails to install in Linux

Weblogic Server 6.1 trial version fails to install in Linux
(in Linux Redhat 6.2, jdk 1.2.2)
1. When unzipping the *.zip file "weblogic610_generic.zip", the unzip program
reported that some files and directories not properly named. (using winzip, quite
a number of files' directories start "d:/".
2. During installation, the screen hanged right after choosing language, and the
background threw "Exception in thread 'main'".

Yes, that is exactly what I ran and it worked.
Kernel: 2.2.12-20
java -fullversion
java full version "Linux_JDK_1.2.2_RC4"
That was to install.
Eric
"Mo Guangquan" <[email protected]> wrote in message
news:[email protected]...
Hello,
Could you give the detailed steps when you unzip and run? Did you only
use the command "java -cp weblogic610_generic.zip install -i console" andit
worked fine? Your system's basic setting like java version and kernal etc?
Thanks.
regards
mo
"Eric Gross" <[email protected]> wrote in message
news:[email protected]...
I actually did my test with RH 6.1. It worked fine.
Regards,
Eric
"Alexander Klimenko" <[email protected]> wrote in message
news:[email protected]...
Sorry guys,
but if you go to "supported platform" document you'll se just Linux RH
7.1
there.
Regards,
Alexander
"Mo Guangquan" <[email protected]> wrote:
error still occurs, guess it is because inside the zip file got some
wrong
absolute paths. error msg:
ZGUtil.getInputStream(): ZGUtil.openZipFile(): Couldn't open /us
java.io.IOException: ZGUtil.openZipFile(): Couldn't open /us
at ZeroGb.c([DashoPro-V1.2-120198])
at ZeroGb.a([DashoPro-V1.2-120198])
at ZeroGb.a([DashoPro-V1.2-120198])
at ZeroGb.m([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.i([DashoPro-V1.2-120198])
at
com.zerog.ia.installer.Main.<clinit>([DashoPro-V1.2-120198])
at install.main([DashoPro-V1.2-120198])
preinstaller.properties not found.
Exception in thread "main"
regards,
mo
"Eric Gross" <[email protected]> wrote in message
news:[email protected]...
Run the following to install it:
java -cp weblogic610_generic.zip install -i console
That will provide a console based install.
Regards,
Eric
"mo" <[email protected]> wrote in message
news:[email protected]...
Weblogic Server 6.1 trial version fails to install in Linux
(in Linux Redhat 6.2, jdk 1.2.2)
1. When unzipping the *.zip file "weblogic610_generic.zip", the
unzip
program
reported that some files and directories not properly named.
(using
winzip, quite
a number of files' directories start "d:/".
2. During installation, the screen hanged right after choosing
language,
and the
background threw "Exception in thread 'main'".

Export and import from lower db version to upper version

Hi
I want to export the schema from database version 9.2.0.5.0 and import in to database version 9.2.0.8.0
What parameters I have to consider ?

Hi,
No consideration required during exp/imp between same version such as 9i here.
Their are different consideration in different versions as ..
e.g.
In order to export your 11g database and import it back to 9i, you will have to use the exp (export utility) and imp (import utility).
Since you are going from a higher version back to a lower version, this is what you need to do
1. Use the exp utility of the lower version (in your case, 9i) to export the 11g database
2. Use the lower version imp utility (in your case, 9i) to import into the 9i database
Imp/Exp utility version should always be similar to lower db version
Thanks,
Ajay More
http://www.moreajays.com

Do images imported to Keynote retain their previous color profile? In other words, if the Keynote presentation will be shown using an sRGB profile projector, should the images be converted to sRGB prior to importing?

Do images imported to Keynote retain their previous color profile? In other words, if the Keynote presentation will be shown using an sRGB profile projector, should the images be converted to sRGB prior to importing or can they be batch adjusted in Keynote?

While I feel your comment doesn't directly address my question, why I am worrying is this.
This presentation is to a camera club. Color is important. Images shown in meetings are projected by an sRGB color profile projector. Most serious photographers us a color profile with a bigger space than sRGB (typically RGB1998). If you project an RGB1998 image on an sRGB projector the colors go to crap. More precisely they become dull and lifeless. Thus, I am trying to determine whether I need to convert the images I plan to put into my Keynote to sRGB and boost the saturation PRIOR to importing them or whether Keynote has a way to do this as part of the software.
Jerry

Import of Software Component Versions

Hello.
My problem is in Integration Repository, in Import of Software Component Versions.
Mensagge is:
" Unable to read software component versions from System Landscape Directory ".
I want import software component.!
Help my please.!!!
[email protected]
In tx sm59, result.
Exchange Infrastructure: Test LCR Connection
RFC destination SAPSLDAPI does not exist
=> Create the RFC destination by using transaction SM59!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
RFC destination LCRSAPRFC does not exist
=> Create the RFC destination by using transaction SM59!
Message was edited by:
        Claudio Leon

Indeed, the instación this incomplete.
It is possible that you indicate to me step by step like making these steps to finish the installation, since I have not been able to finalize and they appear to me new errors.
In SLDCHECK resquest is:
Exchange Infrastructure: Test LCR Connection
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id:      SAPSLDAPI_UNICODE
gateway host:
plata
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
Error when opening an RFC connection
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id:      LCRSAPRFC_UNICODE
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
Error when opening an RFC connection
help me.
[email protected]

Any ideas on how to edit a video that's already embedded in keynote (latest version)?

Any ideas on how to edit a video that's already embedded in keynote (latest version)?

You can change the edit points in: Inspector > Format > Movie
If you want to edit in a more complex manner: save as a package:
File > Advanced > Change filetype > Package
Save As using a different name
right click the file > select show package contents
in the data folder; copy the movie file by option and dragging to the desktop

LR 3.3 importing raw and jpg Version of a image...

i tried to import the raw Version and the jpg Version of an Image
Both files have the same name, but different file-extension.
example.orf
example.jpg
LR 3.3 Folders-View shows only the orf version, but the Finder shows both versions at the import location.
During import process the jpg-version is read first, and was visible until orf-version import was complete.
Mac OS X 10.6.5
Olympus E-5 (import via Cardreader)
How i get both Versions visible in LR?

In preferences make sure you select "Treat JPEG files next to
raw files as seperate photos" before you import the files and it will work. See the screen shot.

Will Keynote '09 version 5.1.1 run on 10.7 Lion?

Will Keynote '09 version 5.1.1 run on 10.7 Lion?
iMac 7.1 Intel core2 duo 2.8 GHz Bus speed 800MHz

I have done hours of work making presentations in Keynote 5.1.1 under OSX 10.6.8 and have been tempted to go up to Lion 10.7 but have read of problems with Keynote. You have suggested upgrading keynote to 5.3 and so I wondered if that would affect the work I have done already. `Thank you.

Can the latest version of numbers [mountain lion] import data from filemaker version 12

can the latest version of inumbers [ mountain lion ] import data from the newest version of filemaker 12 ?

i want to import a filemaker database [ version 12 ] directly into inumbers [ latest version ].
m/s excel 2011 only allows the import of filemaker database - thru version 11 .
since excel does not offer compatibility to filemaker version 12, im looking to see if the lastest version of numbers provides this ability. ? ? ?

How to create Import format for building version Hirerarchy and Node

Hi
i Want to know how to create Import format for building version Hirerarchy and Nodes.Can anyone show me with example or format for version Hierarchy with few nodes for the hierarchy
i Want to Build   this   1. Version1 (Version)
                                 2.Account (Hirerarchy)
                                 3. Balancesheet (Limb)
                                 4. Assets (Limb)
                                 5. Cash (Leaf)
Thanks,

Please follow the DRM User Guide,
http://docs.oracle.com/cd/E17236_01/epm.1112/drm_user.pdf
Below is my preferred approach, by selecting only relation and Hierarchy sections,
The relation section contains the Node Name and Parent Name ( you can include any other properties, but as a best practice keep the Parent Node as the last column).
The Hierarchy ( Hier ) section contains the Hierarchy Name, Top Node and Hierarchy description
Follow the Import steps and provide a Name for the version.
++++++++++++++++++++++++++++++++
[relation]
AC_BalanceSheet AC_Account
AC_Asset AC_Account
AC_Cash AC_Account
[hier]
Account AC_Account AccountHier
++++++++++++++++++++++
Note: Please delete all the special characters (TAB) created at the end of [relation] and [hier] sections while you copy the content from an Excel sheet to a Notepad.

When using the record function for narration in Keynote 09 version 5.1.1., the recording continually gets off sync with the slides even if nothing has been altered on any of the slides.

I am trying to record narration for my slideshow in Keynote 09 version 5.1.1. I put the transitions on automatic and hit the record button, then read the slides as they advanced. The program allows me to record my voice, however, when I play the slideshow back the recording continually becomes more off sync with the slides with each play. Is there a way to fix this?

Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks

How can i import files to trial version LR5.6? Message:Your disk "MobileBackups", to which you are importing images, is low on space.

how can i import files to trial version LR5.6

I currently am up to about 65,000 images cataloged in LR. I backup on launch several times a week and have used the "relaunch and optimize" function periodically as well. I am a bit reluctant to do anything aggressive as, even though I have encountered this warning 6 or 7 times in the past 4-5 months or so I have never had to shut down. I have emptied the recycle bin (which, as I mentioned, usually has very little in it) and then I continue and notice no impairment of function. So at present it represents more of an annoyance and a bit of a mystery only. Maybe I will just report this to Adobe and sit tight unless someone can see an obvious explanation and correction here.
I appreciate all of the input and advice I have received already.

Import of Keynote 09 version fails

Similar Messages

Maybe you are looking for