Import of transport from a system that has same name as target system

Hi,
We have an ECC6.0 SPS10 system with SID as "RD2" and the transport
number range on this system is from RD2K900000 to RD2K999999.
If we import a transport into our ECC system(SID is RD2)from an
external system(vendor system) which has the same SID (RD2) and this
external system transport number is RD2K9A0505, does the transprot
number range change in our system?
After the import of the transport(RD2K9A0505) into our system, if we
create new transport request, what would be the transport number
assigned to it?
will it change to RD2K9AXXXX or will it be the same number range it has
before as RD2K9XXXXX.?
Appreciate your answers.
Thanks,
Vinod.

Hi,
This was very unusual to see, anyways let me put my answers
1. the systems has to be configured in landscape to import the transport requests, and in landscape no two systems can have same SID.
2. The transport system has a specific order tht need to be followed, DEV>QAS>PRD, so you did not mentioned the scenario here(please put doenthe scenario if you are importing from DEV of vendor to your DEV), and the SP level and kernel and everything need to be maintained on same level between source and Target else there is possibility for import error or chnages donot meet the criteria in target.
3. Usually when you do imports between the DEV and QAS or PRD the Change request numbers in DEV are usually high but by importing this into QAS the number range for CR will not change,( here the SID are different). In your case i was uncertain since SID are same and number range format is different.
4. Kindly note that SAP recommends no two SID in landscape can be same, so your source system should be from different landscape where transports can be done only through manually from OS level using tp command, and im in doubt wether tp can recognize the change request that was different in format as a change request number.
Regards....
Edited by: Sita Rr Uppalapati on Dec 8, 2008 8:32 PM
Edited by: Sita Rr Uppalapati on Dec 8, 2008 8:34 PM

Similar Messages

  • Can I import movies originating from video's that were put on a DVD import in IMovie?, Can I import movies originating from video's that were put on a DVD import in IMovie?

    Can I import movies originating from video's that were put on a DVD import into IMovie?

    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it. See this:
    http://support.apple.com/kb/HT3381
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

  • I want to deauthorise a computer from my account that has had all of its settings wiped already. I go to deauthorise but I am being told I have already deaithorised 5 devices this last 12 months so cannot do again until the 23rd June.

    I want to deauthorise a computer from my account that has had all of its settings wiped already. I go to deauthorise but I am being told I have already deaithorised 5 devices this last 12 months so cannot do again until the 23rd June.  His is very frustrating as I have just bought a new laptop and I can't use any of my music on it and my old laptop is dead but I can't deauthorise it. Any tips would be great. Have rung apple and they told me I had to wait.  Doesn't seem fir when I only have 2 other devices working at the moment.

    I don;t know which part of Apple that you rang, but have you tried contacting iTunes Support and asking if they can deauthorise them for you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • How to download music from an ipod that has someone elses apple Id associated with it to my laptop

    How to download music from an ipod that has someone elses apple Id associated with it to my laptop?

    BigG13 wrote:
    How to download music from an ipod that has someone elses apple Id associated with it to my laptop?
    You cannot... that is called Stealing. If you want the Music... Purchase it.

  • How do I delete an album from my iPad that has been synced on my Mac?

    How do I delete an album from my iPad that has been synced on my Mac?

    Unselected the album in iTunes on your Mac and sync again. That will delete the album on your iPad.

  • Is there any way to retrieve photos from a 5c that has gone into recovery mode?

    is there any way to retrieve photos from a 5c that has gone into recovery mode?

    No, by the time its in recovery mode it's too late. The contents of the phone are gone. Did enable any of the ways that Apple provides to back up photos?
    Backup the phone to your computer
    Automatic daily iPhone backup to iCloud
    enable Photo Stream
    Copy photos to your computer using a USB cable and a compatible photo management utility on your computer
    Enable Photo Sharing
    Enable Photo Library backup
    OR any of the 3rd party photo management solutions, such as Google Picasa, Google+, Facebook, Shutterfly?
    OR any of the cloud sharing services such as box.com or dropbox?
    If you have set up any one of these your photos can be retrieved from it.

  • Can an iPad with iMessage enabled receive a text from an iPhone that has iMessage DISabled?

    Can an iPad with iMessage ENabled receive a text from an iPhone that has iMessage DISabled?

    A "non-iMessage-enabled text) would be an SMS message. iPads do not handle these and they do not go through an Apple server to be "converted". SMS is a function of a cellular carrier, not Apple.

  • How do i remove a old never used icloud account from my iphone that has never been vif, how do i remove a old never used icloud account from my iphone that has never been vif

    how do i remove a old never used icloud account from my iphone that has never been vif, how do i remove a old never used icloud account from my iphone that has never been vif and the email is not used

    Hi BJEast,
    If you are having issues changing or removing an old iCloud account from your device, you may find the following article helpful:
    iCloud: Account troubleshooting
    http://support.apple.com/kb/ts3988
    Regards,
    - Brenden

  • Why cant i download from one computer that has internet

    why cant i download from one computer that has internet and use it on my other pc that has no internet,,, computer (a) has been working fine with our ipod,and we have about 4gigs of our music,,,but now we have a pc (b) that has the web, and we have music that we have paid for and cant download it.. the message pops up and says.. would you like to replace your Ipod libary with the one from this computer , we say no so we dont lose our music... we should be able to use the pcs in our house for our ipod i thought. ????????

    If you use more than one computer, you'll need to use manual updates instead of automatic sync.
    Here's an article from Apple regarding using your iPod on multiple machines:
    Using your iPod on Multiple computers.

  • How come my iPad with iCloud doesn't sync with my iPhone 4 that has same apple id and both ios5?

    How come my iPad with iCloud doesn't sync with my iPhone 4 that has same apple id and both ios5?

    Not sure if you just have an issue with your setup or something else.
    I had an issue where my numbers and pages documents were not syncing on my ipad, but were on my iphone. 
    I turned icloud off an on, reset the apps, even deleted them and reinstalled them.  I also checked all of the other icloud setting. 
    Only thing that worked (and it might be just a fluke)  I emailed from my iphone a numbers document to my ipad.  I opened then closed the document and the app.  When I opened it back up it started importing my icloud documents.
    If it is a settings issue then you need to be sure you have icloud setup in your mail settings.  Has to be there and active. 

  • I just got a Mac and I use the same internet connection as my mom and my brother, who has an iPad. He can click on something that has my name and then Macbook Air, and is able to see everything on my computer screen. How do I fix this?

    I just got a Mac and I use the same internet connection as my mom and my brother, who has an iPad. He can click on something that has my name and then Macbook Air, and is able to see everything on my computer screen. How do I fix this so he cant see what i am doing on my computer?

    No, I made sure nothing was checked for that section when i found out he could see my screen. At the top it says "computers on your local network can access your computer at: blah blah". I think thats how hes doing it but i dont know how to fix it.

  • Follow up - DNS (internal domain has same name as external website)

    Hi,
    I am following up with on previous blog entry about resolving an domain internal name to an external website found here:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/4d97325b-ff3a-4f46-ba6e-dc3f4ff978e1/dns-internal-domain-has-same-name-as-external-website
    On October 30, 2014
    HayashiTech provided a response suggesting the use of netsh interface portproxy on the DC's to resolve this issue. There has been no feedback to this suggestion and I am very curious what opinions are out there for this suggestion as it appears to be the
    best option provided yet.
    Thank you in advance as well for all the great guidance I have found provided by Ace and his followers.

    Interesting question. I've not seen that solution before, but having done a test on my lab setup it certainly seems to work as expected. Eg, using :
    netsh interface portproxy add v4tov4 listenport=80 listenaddress=dc1.abc.com connectport=80 connectaddress=www.abc.com
    on my DC where I've setup a working external domain name with the www record pointing to the website, and the non-www record pointing to the DC, requests to the non-www address are successfully being redirected to the www address (after confirming it didn't
    happen prior to adding the portproxy).
    So on the face of it that does look like a workable solution. I haven't used it myself in anger obviously, but the two downsides I can think of immediately to this solution are :
    1) This operates as a proxy, so unlike the IIS method that Ace mentioned where it would tell the client to go to the www address instead (so the client connects direct), this method keeps your DC acting as a middle man, eg all communications to that address
    go through your DC rather than direct from the client to the website. Depending on what they're doing on the website this may or may not be an issue for you.
    2) Since the client is continuing to connect to the DC throughout, if you ever did need the have something on the DC responding to port 80 then you could have issues. That said, according to
    https://technet.microsoft.com/en-us/library/cc731068(v=ws.10).aspx the portproxy listenaddress can be a FQDN rather than IP, so that could mitigate any issues there.

  • I recently got bought an Ipod touch 2nd Generation, and I want to transfer music from a CD that has been Imported into Itunes, yet it dosen't then show up that i have downloaded the music....why is this and how do i fix it?

    I really need help with downloading music from a CD that was imported to Itunes, bt is not showing p in my Ipod Touch's music....please somebody help!

    Sorry, no this didnt solve my question i pressed a wrong button.....
    No i havent synced music before...yes they do play in Itunes
    Also, when I am connecting itm it isnt connecting or showing up that the device is connected
    Message was edited by: MollyMeyer1998

  • How to import the transports from the SAP Integration Kit into SAP system

    Hi expert,
    I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
    "Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
    Copy the needed files on your sap-system in the correct folders:
    - usr\sap\trans\cofiles
    - usr\sap\trans\data
    Use the transaction STMS.
    Also take care of the sequence of importing. See the manual for details."
    Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
    Please advice.
    thank you

    Hi Rajesh,
    check this : logon failed. you do not have the necessary rights to design reports
    @Sri

  • Transport from one System to another

    Hello,
    I want to transport from one XI-System to another XI-System. I tried to make a import from the SLD but that doesn´t work, why? When i make a file transport and make changes of the transported Software-Component will there be the changes of the original Objekts in the sld?
    Thanks in advance,
    Frank

    Hi all,
    In the case when we have multiple SLD's for Dev/QA/Prod ..There has been a case of manual business system creation in QA for some scenarios. Now I need to move a new scenario into QA and I would like to do an SLD export from Dev to QA..
    1.Will this overwrite the existing business systems in QA?I have re-created the QA business sytems  in DEV with a QA target..
    2. I am taking a Backup of QA SLD before doing this.
    Any advise..
    -Teresa

Maybe you are looking for