Import old Library to the last version of Apperture

Hello
I have a trouble about import old library. I have one done in a version 3.0... and I would like to import it to the Aperture last version. I obtain only an error message that I have to update the library before to import. How can I do to be able to import it without to reinstall an old version in my actual Mac.
Thanks for your help
Philippe

What is the message like, that you see? Do you see the message below? That is not an error message, just an information that your library is outdated.
If it is this message, then press the "quit" button and do first a "rebuild library", to ensure that your Aperture library does not have any inconsistencies that might cause problems.
Hold down the "⌥⌘"-key combination (press firmly) and double click the Aperture Library to launch Aperture into the "First Aid" mode. Select "Rebuild Database" from the "First Aid" panel.
Now Aperture should upgrade and rebuild the Library in one go - that may take a while for a large Library - do not get impatient and force quit Aperture, unless you do not see any progress at all for hours.
If you see a different message, and Aperture crashes or does not launch at all, please explain what you see exactly and post the full error message.
Regards
Léonie

Similar Messages

I can´t open my library with the last version

I HAVE RESET MY COMPUTER WITH THE IPHOTO 7.1.5 VERSION AND MY IPHOTO SAID THAT I CAN´T OPEN MY LIBRARY AND I HAVE TO RETURNED TO THE PREVIOUS VERSION.
VSN YOU HELP ME
Ha realizado cambios en su fototeca con una versión de iPhoto más reciente. Salga y utilice la última versión de iPhoto.

You reinstalled an old version of iPhoto after you updated your library to the newer version.
Update ALL your software and try again.
Click the Apple Menu at the upper left-hand corner of your screen and select "Software Update..."
Repeat until it tells you there are no more updates.
AND, launch the App Store application located in your Applications folder to see if there are any updates there as well.

HT4792 So I have a question for this: I folowed this procedure, but when I'm trying to import the IOS from IMovies in my laptop I receive a message that states that the IMovie version installed doen't supports IOS files, although I have the last version i

So I have a question for this: I folowed this procedure, but when I'm trying to import the IOS from IMovies in my laptop I receive a message that states that the IMovie version installed doen't supports IOS files, although I have the last version installed with all the updates... Any ideas, thoughts?
Thanks

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

HT3825 i cant import my 5d 3 raw file using iphoto. how i can solve my problem? i already download the last version of adobe raw ubdat

i cant import my 5d 3 raw file using iphoto. how i can solve my problem? i already download the last version of adobe raw ubdat

A Good samaritan answered this for me on another forum
How to update Camera Raw

Firefox ESR 10.0.12 disables flash plugin - updates to the last version do not work?

Suddenly - without any actions by me - FF ESR 10.0.12 refuses to accept Adobe Flash? (System Win 7 64 Ultimate)
It started with a very annoying bar, which cost me 2 hours to deactivate, which told me to update an very old and unused Adobe Reader plugin. Then it insisted, that the Foxit PDF reader plugin was not up to date. Since I do not use it, I deactivated it too. Since I seldom use Flash, I just found out today, that youtube does not work anymore - FF insists, that my flash plugin is too old and it deactivated it.
This has cost me hours up to now and it is _exactly_ the reason why I use the ESR channel.
What I did:
Deinstalled Adobe Flash completely (using Windows). Used the normal Firefox update, which it recommends (your flash player was deactivated, please install...). No success, it simply goes into a loop, always telling me my flash player is too old.
I also installed it directly from Adobe (the Firefox version!!), in all cases it reports version 11.5.502.104. The last version from Adobe - but it seems to be too old???
I am spitting angry now - this kind of trouble is the reason I only use ESR versions from Mozilla. I do not want your chaos troupe to play around with _my_ installation. But obviously you found ways to do so.
If this is not solved (and no, I will _not_ reinstall Firefox, I will _not_ delete my profile) in a few days, Firefox is dead for me. I am already looking to Chrome and Opera. Many friends have these browsers - I am a bit conservative, and I want my browser stable and the look an feel should be stable also. I do _not_ want a new version every two weeks, which every time costs my effort and time to configure it how I want it.
The question here is: How did you manage to disable the last version of Flash, and why? Why must I now register here and invest valuable time to get my browser to work again?? If I had done something, installed or removed something, ok. But I did not. (And yes, up to now I did update Flash and other plugins, when I was prompted to do so)
Clearly _your_ management does _not_ work: If I use the solutions which FF itself recommends, it sends me in an endless loop: Install newest Flash, sorry, Flash is outdated, install newest Flash...
Is this the 'new security'? Bah. If you did this for the 'normal user' (which you obviously do not respect anymore), you failed. And you failed completely for me: If software insists to do things 'automatically', it should at least do them reliably, _or_ it should ask. But working in the background, changing important things, reporting nothing, and then failing is exactly the reason why I disable all 'automatic' activities and want to be _asked_ before some idiotic piece of c.... deconfigures itself - and stops working...
Hints to the Troubleshooting Info below:
At this time Flash player is installed, shows in the systems software list as 'Adobe Flash Player 11 Plugin', Version 11.5.502.146. The rest are my normal plugins. Serveral changes to about:config were done by me in an effort to make FF usable again, without nagging 'info' bars...

Additional information - according to the wiki you pointed me to, it was correct to uninstall flash using Windows control panel. I am very sure that I already had the latest version installed from the beginning, because Flash player pointed me to an update on Windows start (as usual) several days ago.
The error clearly lies with FF, since despite an up to date Flash player it decided it wants it new - something to do with the blacklist? How can it tell, that its outdated, if it does not find it and not show it in the list of plugins?
There is something fishy here...

Having a problem import my library from an older version of 3

Apple replaced my computer. I did not import my old library before upgrading to aperture 3.3.1. I get a meessage when trying to import the library. "The library could not be imported because it is from an out of date version of Aperture 3. Please upgrade the library to the latest version of Aperture 3 and try again." I don't see how to upgrade the library so i can import it into the new version of aperture.

There are a some fonts that gets installed with the Adobe app, and only get loaded when Ilustrator is booted.
/Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Required/Fonts/
To better help you will need answers to these questions
What OS you are on
What fonts you are having trouble with
Do you use any font utility such as an Extensis product, or fontbook on mac to manage you fonts.
as this also may be a problem with your font cache needing to be reset.

The last versions of tp and r3trans executables

Hi all,
I am upgrading the add-ons with saint s-tcode. I have an error message like this:
The import checks of your system showed that the transport tool tp or
R3trans does not have the correct version to import the OCS queue
without errors.
Minimum version of tp: 380.03.74 (in system: 380.03.50)
Version of R3trans from: 09.03.2012 (in system: 26.10.2011)
Install the latest available versions of the transport tools tp and
R3trans (see also SAP Note 19466). Then continue with the import of the
queue.
I have update the solman kernel with the last version (solman kernel version is downloaded with 51033508_8 file). But the versions of tp and r3trans is not still enough.
The new version of my solman system is kernel 720, support package level 114.
Also i downloaded abap kernels from sap portal. I used this kernels executables by replacing the old ones. It didnt work.
How can i upgrade version?
Thanks.

http://service.sap.com/patches
Browse our Download Catalog
Additional Components
SAP Kernel
SAP KERNEL 64-BIT UNICODE
SAP KERNEL 7.20 64-BIT UNICODE
Windows on x64 64bit
#Database independent
Click on "Last Changed" to see the most recent ones on top.
Regards

I use Mac 10.4.11 Can I get back to the last version of foxfire I was using?

I have been using foxfire on my computer for the past few years. Today I was trying to upgrade and when I did, it took off the old foxfire and then told me it could not upgrade. Now I can't get foxfire at all because it is telling me my system is too old. I use Mac 10.4.11 Can I get back to the last version of foxfire I was using?

Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''<u>and</u>''''' OSX 10.5 or higher (you have version 10.4)
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
'''''The good news''''' is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

How can I re-install the last version of iPhoto, I hate this new version.

How can I re-install the last version of iPhoto. I hate this new version "Photos 1.0" which installed yesterday on my iMac. Please help. My operating system is OS X YOSEMITE 10.10.3. THANKS.

Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

HT4527 I'm transferring my iTunes library from a PC to my new iMac via home sharing. I've followed all of the steps to "import" my library but the "import" button is greyed out. Any suggestions?

I'm transferring my iTunes library from a PC to my new iMac via home sharing. I've followed all of the steps to "import" my library but the "import" button is greyed out. Any suggestions?

There is no need to import anything or use Home Sharing.
Copy the ENTIRE iTunes folder from the old computer to the new computer, everything will be exactly as it was.

What is the last version of the Apple OS that supports Eudora and Quake III? (I'm at 10.4.11)

Hi There,
I am having vertical line issues with my G4 PowerMac Quicksilver (April 2002).. Red or purple lines and sometimes they connect to the pointer arrow.
I thought it was the graphics card but when I ran the Apple Hardware Test Disk version 1.2.5 it failed at the Logic board, although it's an after market Logic board because one of my (2) 1 gig processors died a few years back so I don't know if the hardware test disk is still valid with an after market Logic board?
Also What is the last version of the Apple OS that supports Eudora 6.2.4 and Quake III? (I'm at 10.4.11)
Thanks for any and all help, I think my time is limited in my old Mac..
Eric

Hi-
I'd strongly recommend replacing the thermal compound on the Radeon 9800 Pro. It could very easily be a simple matter of lack of cooling which is causing your issue.
I have a tutorial here:
C874D84E-96DD-4DFF-9566-7C66BE065BB5.html
16196A0F-952B-47ED-A9F9-91F7B0ECA431.html
Use Arctic cooling MX-4 compound.
As for drivers or ROM updates, if the card is a flashed one, don't bother with the firmware. All ROMs are the latest firmware.
In Tiger, there is a retail driver update that you can try:
http://support.amd.com/us/gpudownload/Pages/jan2005updater.aspx
No updates needed for Leopard.
Eudora should be fine:
http://lowendmac.com/misc/10mr/mb0910.html#1
Quake is fine. This coincides with my observations:
http://www.insidemacgames.com/forum/index.php?showtopic=31884

Flash player doesnt work on safari, even with the last version 11.6

hello,
Since yesterday, my flash player doesnt work on safari (OS X10.8.2). I tried to update flash with the last version (11.6) from adobe website, but i still have the same probleme. Can you please help me ?
Thank you

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 4.
1. If you're getting a "blocked plug-in" error, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
2. Triple-click the line below to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. If there is more than one item in the folder with the words "Flash Player" (not "flashplayer") in the name, open the respective Info windows, check the version numbers, and delete all except the latest. You may be prompted for your login password.
3. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
4. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
5. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
6. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.

Problems with the last version of Java

Hi
I have MacBook Pro Mac OSX version 10.7.5, and I have udapte the last version of Java 7 version 25 and then since yesterday three of my genetics programs don't run.
How can I get back the previous version of java?
Thanks

Try the steps given in the link below....Remember....,install the old version,if this problem persists
http://forums.adobe.com/message/4041846#4041846

HT1926 The last version of 64bit iTunes problem

Hello. The last version of itunes 64 bit has a strange problem. It install itself to program files x86 folder and not to run smooth. It always stopped itself and closed. 11.0.4 doesn't have this kind of problem. Please someone help.

If you're worried about your music alone, I found a solution. I subscribed to iTunes Match, Settings > iTunes & App Store > iTunes Match. It saves all your music to iCloud, so when you're on iTunes and signed in with your Apple ID, you don't even need to sync the phone over Wi-Fi or USB. It does it automatically over iTunes. I sometimes like to rip video files from Youtube and turn them into mp3 files for music purposes on my phone, (let's face it, no one can afford a full music library at $1.29+ for one song....) so I'm going to try that now and see if it syncs to my phone when it's downloaded into my iTunes library. My other songs synced when I enabled match on my phone and macbook, so if it works, I'll let you know.

HT4623 I'm using IPhone 3G with IOS 4.2.1 and when I insall Viber is tell me that it needs IOS 4.3. The last version of IOS which support 3G is 4.2.1 only. Do we have to throw away our IPhone 3G

All the new Apps don't support my iPhone 3G IOS 4.2.1, and that is the last version to iPhone 3G. Why Apps like Whatsapp, Facebook and others require IOS 4.3 while 3G don't have that version?

You can give away or sell the 3G, and buy a current iPhone. The 3G is over 4 years old. Technology moves on.
Progress...

Import old Library to the last version of Apperture

Similar Messages

Maybe you are looking for