Import one single driver or all CD?

Hi all MDT guru,
simply question. We are using all driver on one place in Out-of-Box driver, because we have only two version of desktop based on intel. But now, we have another brand desktop and I would like use inject direct driver. This is still not a problem, not counting
the bad drivers that must be installed. Here I still do not know how I to recognize.
I would like ask for another question. If you import driver, do you import only single one correct driver or all pack from brand CD or all in one driver cab ?
Looks like stupid question but it's easy to put CD with all driver and import them to right folder. Problem was, that wizard import drivers, that I never need. If I download driver from web it's same problem, one pack for dozens of sound cards, so than I
have in "out of box drivers" hundreds of unwanted drivers.
If you preferring only one correct driver (which I think) to injecting correct driver do you use any tool to find the right one ? Or script to find the correct driver name. How to find and choose the right one ? Or you use the detail after rimport driver
and check PnP ?
Thank for help and sorry for my English an maybe stupid question.

Peter,
Best thing you can do to my opinion is verify the hardware ID of the device that is missing the driver against the
pcidatabase.com this will tell you for almost every device which driver you need, so you can find it and import it into MDT.
The importing drivers step always import's everything under the targetted folder that you have specified. Want to import a single driver? -Then make sure this driver is in a single folder, with no other drivers in that particular folder.
Good luck!
If this post is helpful please click "Mark for answer", thanks! Kind regards

Similar Messages

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

Putting ALL my music into one single drive, from multiple drives & machines

It serves me right, but I have created a wild mess of various instances of iTunes on various machines, with some music purchased and some from ripped CDs. I also haven't used the ipod much, until only recently, so most of my collections have been bound to my MBP and G5. My backup procedure is a worst practice method of just cooying stuff from one drive to another and occasionally buying new hard drives. Now that I have plenty of drive space, the only problem will be logistics. I'm using Tidy Up to locate duplicate files but that only gets me part of the way there.
Ideal scenario is locate all the "music" folders from various users in my household and various hard drives and eliminate the duplicate files. Then I just create one massive music folder, and point iTunes to that folder and all the music will magically be in iTunes. Something tells me it's not that simple, especially when you have music by artist > album > song in iTunes. I also have this crazy idea that I'll have that one big drive of music hooked up to my Airport Extreme and I cam listen to it on various machines throughout the house. (Didn't Apple say I could do this one day??)
So to summarize:
Can I just let iTunes do the work of organizing all the music? Will it also delete duplicates? (I'm assuming Tidy Up will be the thing for that.)
Can I hang the drive off my Airport router and access that in that special AirTunes way?
Hope that makes sense....please go easy. I'm just an idiot with a lotta hard drives....
Lee

I guess I can reply to my own post. I wanted to add that, although I see a lot of similar posts about organizing with iTunes, I don't see one as complex as my scenario. Unless I'm missing something.
Thanks in advance, O Great Apple Discussion Board People.....

Importing one image rather than all

Hi
We get numerous customers bringing in their digital cameras wanting us to download their photo of their car, truck, house, etc. for a photoad in our paper.
Is there a way to import just one image number rather than all images on the card/camera?
Thanks
Heather

Hi Heather, there sure is!
Using Image Capture to download images and video clips:
Open up Image Capture which is found in the Applications folder.
When it is opened, go to Image Capture/Preferences
Under the General button choose
Camera: When a camera is connected, open Image Capture.
The next time you connect your camera Image Capture will open.
In the window that opens you will see an Options button. Click on that button to set your options. You can download some or all the images.
To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
iPhoto: How to Change the "Open Automatically" Preference
If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.

Routing of messages to different interfaces via HTTP using one single URL.

Hi all,
I'm working on an inbound scenario. Messages are coming to SAP via HTTP adapter and i'm using a unique URL of every interface. But what is required is one single URL for all interfaces without any dropbox in PI, i.e. all messages will be pushed to one URL and i have to route them to their respective interfaces, there is no storage involved in PI box.

Shamit2903 wrote:
Hi all,
>
> I'm working on an inbound scenario. Messages are coming to SAP via HTTP adapter and i'm using a unique URL of every interface. But what is required is one single URL for all interfaces without any dropbox in PI, i.e. all messages will be pushed to one URL and i have to route them to their respective interfaces, there is no storage involved in PI box.
logically this is not a possibility.
But in case you are looking at a generic interface then you will have to handle this using;
1. a generic Data type to accommodate all required structures
2. use conditional routing in configuration to execute further transformations.
I wouldnt recommend this though.

K8tNEOFSR SINGLE DRIVE AND NO STUPID RAID?!!!!

Hi, I have 1 sata wd 160 gb drive on my pc (k8t neo FSR+ am 64+3000+1gig Kingston+RADEON9800PRO ) connected to the VIA VT8237 serial ata ( not promise, I don’t have that) everything works fine, the problem is that I cant disable RAID,. I want to use only one single drive as fast as I can.
but the RAID bios always appears on the screen when booting slowing things downn
( pressing F10 doesn’t help because I don’t have other drive) then windows starts loading.
How can I disable raid and keep one single sata drive functioning ? pata ( cd drive) and sata is enabled on bios One of the readme files mentions that there are 2 type of sata bios, one with raid and the other without it (6420NXXX.ROM) how can I install the new sata bios? Anybody knows a solution?
Thanks
Sorry for the lousy English

Hi
The screen you are seeing appears to be the VIA SATA drives screen, aslong as SATA are connected and enabled you will see this. It is setting up your satas,
CH_0 is the drive on SATA1, CH_1 is the SATA2 connector. Ignore the raid, it is a controller for the sata drive.
cheers
jocko

I've been importing all my old CDs into itunes but one of them which was unknown imported as single tracks. How can I combine these into one album

I've been importing all my old CDs into itunes but one of them which came up as unknown has imported as single tracks named track 1, track 2 etc. It wasn't an obscure CD (Paul Carrack - the journey so far) but not one that's available in the itunes store. I've manually changed the track names but they all appear as single tracks in the "Albums" section. Is there a way to put them all into an album to show up as an album with the other albums. Other "unknown" CDs I imported have imported with the correct track names but just don't have the album artwork so I don't understand why this one is behaving totally different?

If you select the tracks all together in iTunes/ Songs then go to File/Get info you will be asked "Are you sure you want to edit information for multiple items?" Go ahead and you can make them into an album, putting in the artist name, etc.

Script to search all files in specified folder for multiple string text values listed in a source file and output each match to one single results txt file

I have been searching high and low for this one. I have a vbscript that can successfully perform the function if one file is listed. It does a Wscript.echo on the results and if I run this via command using cscript, I can output to a text file
that way. However, I cannot seem to get it to work properly if I want it to search ALL the files in the folder. At one point, I was able to have it create the output file and appear as if it worked, but it never showed any results when the script
was executed and folder was scanned. So I am going back to the drawing board and starting from the beginning.
I also have a txt file that contains the list of string text entries I would like it to search for. Just for testing, I placed 4 lines of sample text and one single matching text in various target files and nothing comes back. The current script
I use for each file has been executed with a few hundred string text lines I want it to search against to well over one thousand. It might take awhile, but it works every time. The purpose is to let this run against various log files in a folder and
let it search. There is no deleting, moving, changing of either the target folder/files to run against, nor of the file that contains the strings to search for. It is a search (read) only function, going thru the entire contents of the folder and
when done, performs the loop function and onto the next file to repeat the process until all files are searched. When completed, instead of running a cscript to execute the script and outputting the results to text, I am trying to create that as part
of the overall script. Saving yet another step for me to do.
My current script is set to append to the same results file and will echo [name of file I am searching]: No errors found. Otherwise, the
output shows the filename and the string text that matched. Because the results append to it, I can only run the script against each file separately or create individual output names. I would rather not do that if I could include it all in one.
This would also free me from babysitting it and running each file script separately upon the other's completion. I can continue with my job and come back later and view the completed report all in one. So
if I could perform this on an entire folder, then I would want the entries to include the filename, the line number that the match occurred on in that file and the string text that was matched (each occurrence). I don't want the entire line to be listed
where the error was, just the match itself.
Example: (In the event this doesn't display correctly below, each match, it's corresponding filename and line number all go together on the same line. It somehow posted the example jumbled when I listed it)
File1.txt Line 54
Job terminated unexpectedly
File1.txt Line 58 Process not completed
File1.txt
Line 101 User input not provided
File1.txt
Line 105 Process not completed
File2.txt
No errors found
File3.txt
Line 35 No tape media found
File3.txt
Line 156 Bad surface media
File3.txt Line 188
Process terminated
Those are just random fake examples for this post.
This allows me to perform analysis on a set of files for various projects I am doing. Later on, when the entire search is completed, I can go back to the results file and look and see what files had items I wish to follow up on. Therefore, the
line number that each match was found on will allow me to see the big picture of what was going on when the entry was logged.
I actually import the results file into a spreadsheet, where further information is stored regarding each individual text string I am using. Very useful.
If you know how I can successfully achieve this in one script, please share. I have seen plenty of posts out there where people have requested all different aspects of it, but I have yet to see it all put together in one and work successfully.
Thanks for helping.

I'm sorry. I was so consumed in locating the issue that I completely overlooked posting what exactly I was needing help with. I did have one created, but I came across one that seemed more organized than what I originally created. Later
on I would learn that I had an error in log location on my original script and therefore thought it wasn't working properly. Now that I am thinking that I am pretty close to achieving what I want with this one, I am just going to stick with it.
However, I could still use help on it. I am not sure what I did not set correctly or perhaps overlooking as a typing error that my very last line of this throws an "Expected Statement" error. If I end with End, then it still gives same
results.
So to give credit where I located this:
http://vbscriptwmi.uw.hu/ch12lev1sec7.html
I then adjusted it for what I was doing.
What this does does is it searches thru log files in a directory you specify when prompted. It looks for words that are contained in another file; objFile2, and outputs the results of all matching words in each of those log files to another file: errors.log
Once all files are scanned to the end, the objects are closed and then a message is echoed letting you know (whether there errors found or not), so you know the script has been completed.
What I had hoped to achieve was an output to the errors.log (when matches were found) the file name, the line number that match was located on in that file and what was the actual string text (not the whole line) that matched. That way, I can go directly
to each instance for particular events if further analysis is needed later on.
So I could use help on what statement should I be closing this with. What event, events or error did I overlook that I keep getting prompted for that. Any help would be appreciated.
Option Explicit
'Prompt user for the log file they want to search
Dim varLogPath
varLogPath = InputBox("Enter the complete path of the logs folder.")
'Create filesystem object
Dim oFSO
Set oFSO = WScript.CreateObject("Scripting.FileSystemObject")
'Creates the output file that will contain errors found during search
Dim oTSOut
Set oTSOut = oFSO.CreateTextFile("c:\Scripts\errors.log")
'Loop through each file in the folder
Dim oFile, varFoundNone
VarFoundNone = True
For Each oFile In oFSO.GetFolder(varLogPath).Files
'Verifies files scanned are log files
If LCase(Right(oFile.Name,3)) = "log" Then
'Open the log file
Dim oTS
oTS = oFSO.OpenTextFile(oFile.Path)
'Sets the file log that contains error list to look for
Dim oFile2
Set oFile2 = oFSO.OpenTextFile("c:\Scripts\livescan\lserrors.txt", ForReading)
'Begin reading each line of the textstream
Dim varLine
Do Until oTS.AtEndOfStream
varLine = oTS.ReadLine
Set objRegEx = CreateObject("VBScript.RegExp")
objRegEx.Global = True
Dim colMatches, strName, strText
Do Until oErrors.AtEndOfStream
strName = oFile2.ReadLine
objRegEx.Pattern = ".{0,}" & strName & ".{0,}\n"
Set colMatches = objRegEx.Execute(varLine)
If colMatches.Count > 0 Then
For Each strMatch in colMatches
strText = strText & strMatch.Value
WScript.Echo "Errors found."
oTSOut.WriteLine oFile.Name, varLine.Line, varLine
VarFoundNone = False
Next
End If
Loop
oTS.Close
oFile2.Close
oTSOut.Close
Exit Do
If VarFoundNone = True Then
WScript.Echo "No errors found."
Else
WScript.Echo "Errors found. Check logfile for more info."
End If
End if

Hi I recently destroyed my iPhone 4 before replacing it I backed it up through iTunes... I restored my new phone from my old one's back up but not one single picture was copied.. Did I lose all my pictures or is there a simple solution???

Hi I recently destroyed my iPhone 4, before replacing it I backed it up through iTunes... I restored my new phone from my old one's backup but not one single picture was copied.. Did I lose all my pictures or are they just hiding on my com?? is there a simple solution??? I thought I was doing everything right by backing up my old one first... now Im scared I lost everything including a lot of very important pictures.. PLEASE HELP!!

Restore from the backup!
You password: You have set it! It might be your passcode or you mioght have set it accidentally, so test all of the passwords you normally use. If you cannot get the password you backup is lost, but you can still sync your iTunes content.

Imported Events to External Hard Drive and all Projects refuse to link!

Hi,
I have successfully moved all my iMovie Events to an external hard drive (EHD) as I am running out of space on my Mac. The Events all play fine, iMovie correctly links to them. HOWEVER: All the iMovie Projects I created using these Events are now showing yellow triangles and exclamation marks (but they play in iMovie for as long as the EHD is connected), and when I tried to import the projects to iTunes, all these appeared as missing source clip. What could have happened? Does this mean that I have to create projects with the source files on my Mac HD only, o that the Events have to be in their final location when I use them to create a project?
Thanks a lot!

The first thing to do is to move your Events back to your internal drive. They should go in the Movies/iMovie Events folder.
Check to see that all the links in your projects work.
(Note: If you are short on space, you can do this one event at a time.)
Then, you can move the events back to your external drive, but you must do this from within iMovie.
First, click View/Show Events By Disk.
Then Drag and drop the events in the EventLibrary List in iMovie to the small icon for the external disk that is also in the Event Library List.
This will preserve the links.

I recently moved all of my photos from one portable drive to a new and much larger one. I use LR 5 and and all of the folders now have a ? in their folder icon. The thumbnail is there but no actual photo. How do i reconnect them?

i recently moved all of my photos from one portable drive to a new and much larger one. I use LR 5 and and all of the folders now have a ? in their folder icon. The thumbnail is there but no actual photo. How do i reconnect them?
Jim Boehme
[email protected]

Duplicate post
see the answer at your earlier post LR 5

Can I use one icloud drive account to back up all family share devices?

Can I use one icloud drive account to back up all family share devices?

No
They all use different iCloud accounts and they will backup to their own iCloud accounts

How to force RH9 to use only one master stylesheet for all Word imports?

I have set a stylesheet (css) as the default for my RH9 WebHelp project in project settings. When I import Word documents into the project, the edit import setting dialog does not show this stylesheet in the list of available stylesheets for the import.
What is happening instead is a proliferation of unwanted stylesheets derived from all the imported documents. I then have to manually re-set all the new topics to the master stylesheet.
How can I stop this, and force RH9 to use only the one master stylesheet for all imports?

cid:[email protected]
Hi Peter,
That’s what I thought I was doing in the Project Settings>Import tab>CSS for Style Mapping selection. Maybe that isn’t what it’s meant to do. It’s just getting annoying having all these unneeded files popping up in the project manager so that I have trouble distinguishing the “real” topics from the extra stuff.
Michael West | Business Improvement | Aurecon
Ph: +61 3 8683 1996 | Fax: +61 3 8683 1444 | Mob: 0407 485 228
Email: [email protected]
PO Box 321, South Melbourne | VIC 3205 | Australia
http://www.aurecongroup.com
http://www.aurecongroup.com/apac/groupentity/

Can't find last import from iPhone! Noticed as I imported I had that view where there was only one project symbol, not all my projects showing by date, but even so pictures were imported. It took the time to do them, so where

Can't find last import from iPhone!
Noticed as I imported I had that view where there was only one project symbol, not all my projects showing by date, but even so pictures were imported. It took the time to do them, so where aare they? I have closed and restarted to get back fll view of all dated projects, but nothing can be found from today...

have i posted it right...?? no response from apple guys...

ITunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

iTunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2

Import one single driver or all CD?

Similar Messages

Maybe you are looking for