Import pictures from Kodak Photo CD to CS5

How can I import pictures to CS5 from Kodak Photo CD??

Hello, and welcome to the forum. You are lucky, this very same question was answered one week ago in the following discussion: http://forums.adobe.com/message/5333694#5333694

Similar Messages

  • How to I import pictures from Apple Photos 1.0 to Lightroom 6.0?

    I can't find an option to do this! Importing pictures from my pictures does not have all the images. My photos app(by Apple) has all my pictures which I would like to import to Lightroom. Can anyone suggest how this can be done? I downloaded the trial version today. Thanks in advance for any help you are able to provide.

    no you can't only option is to take it apart and put the harddisk in an usb ext harddisk case and connect it to the computer copy the photos to the computer
    take the harddisk out of the ext usb harddisk case and put it back into the appletv and assemble it again

  • Can't import pictures from Kodak EasyShare Z915

    I used a Kodak EasyShare Z915 camera to shoot two pictures but the EasyShare software doesn't work. Neither the original software on CD, nor the Version 6.2 that I downloaded from the Kodak website.
    Their theory is that the action of plugging the USB 2.0 cable into the Mac, is enough to identify the presence of the camera, and proceed from there, an automatic handshaking that is sufficient to begin the image import process.
    Unfortunately for me, plugging the USB 2.0 cable into the Mac, does not seem to be enough to get the handshakes going.
    Even worse, it interfered with my keyboard and mouse to the point that I could not click my reset button. I had to unplug the darn power cable instead, and go through a cold power up.
    No help from the programmers at Kodak. I guess they already have their hands full with Windows bugs.

    Ken Hart wrote:
    Sorry, just trying to help.
    I've got an older Easyshare camera and while I've used the bundled Kodak software in Windows OK, I never tried it on my Mac as iPhoto (or rather Image Capture) recognized it and would transfer the photos.
    Have you tried an inexpensive USB media card reader that you can just plug the card into and transfer the pictures that way?
    I was using the internal memory of the Kodak EasyShare Z915. If only I'd had an extra SD card to put in it, when I shot the pictures! It is not like I don't have any. I have lots of SD cards. In the case of the Kodak EasyShare Z915, there is a small amount of internal memory that is "built-in." There are two pictures on it at this very moment. Probably the maximum.
    Now, I am not sure if there is an easy way to treat the entire camera as a removable SD, fortuitously plugged into a multi-card reader. The only multi-card reader I have, lacks a double USB port (which no doubt would be a handy thing to have). The camera doesn't look like any part of it slides into the multi-card reader. Can you suggest a multi-card reader (or even a single card reader) that has a port that opens up wide enough to plug a Kodak EasyShare Z915 into it somehow, in the way you are visualizing? The Kodak EasyShare Z915 has a female USB 2.0 port. Were you visualizing the possibility it had a male USB 2.0 plug that swings out?
    You would think camera manufacturers would have entertained the possibility somewhere along the line that direct camera-to-camera daisy-chaining, is what a lot of consumers would immediately go for, obviating the need for a host computer to store the pictures on. Of course, that sort of thing might be possible, just by swapping out SD cards. But I made the mistake of shooting the pictures directly to the camera's internal memory, where it now appears to be trapped.
    Do you want/need the Kodak software for a purpose other than the transfer of images (not being insulting here, just asking).
    I would ditch their bundled software in a heartbeat if I could. It doesn't work. It freezes my keyboard, and jams my mouse. I just want those two pictures out. I am on the verge of buying a PC just for this one purpose.
    One more troubleshooting tip. Are you using the USB cable bundled with the camera?
    Yes. It is a black USB cable, fits just fine, and happens to have a little torus magnet attached to one end, apparently to stabilize any high-speed data transfers it is attempting.
    I've found that cameras often include a proprietary USB cable. I've been perplexed by this several times when I used a standard cable to connect my camera, have it recognized but unable to transfer the photos.
    Message was edited by: beta_zero

  • How does iPhoto import pictures from iPhone photo stream?

    Sorry for so basic a question, but I thought I understood how this was working (in iOS 7 and this version of iPhoto 9.6)  But now, in Yosemite, and iOS 8, I am not sure what is occurring.
    My intent is to take pictures on the phone, and when I cable-sync with my iMac, I want to d/l and keep all of the new photos permanently in iPhoto.  I have then gone to Image Capture, brought down a 2nd backup copy, and deleted them off the phone.  This would leave me with an empty Camera Roll, but with 1,000 recent photos available on my phone, via the Photo Stream.
    I've used iPhoto for years, and have a large number of pictures there.  Recently, with the advent of the Photo Stream, I'm automatically getting Events added (and added to) like November Photo Stream in iPhoto, which has worked fine.
    However, the last few times in iPhoto, I'm getting random photos showing up as unsynced... ones which should have been brought in previously.  And today when I went to clear the photos off the phone in Image Capture it told me I had 2,400 pictures.
    If someone could give me (or point me to) a primer on how this is now supposed to behave, I'd appreciate it.  I'm afraid that Apple is structuring all of this toward iCloud-photo storage when they release Photos, and that will not work for me.  I need to keep my pictures locally, although the Stream has been handy.  I need to be sure I'm doing this in a reasonable way... the method I'm using doesn't seem to be working very well.  Thanks again, for all advice.

    If you go to the Photo App, then select photo stream, you can delete any of them by selecting the edit button and tapping on them. A delete button or trash can should appear. Excuse me for being a little vague...ive been on iOS 7 for a while now...

  • When I import pictures from my camera into iPhoto, does it import the original photo size?

    I've been importing pictures from my camera & my phone into iphoto, but I'm not sure if it's automatically importing it as the original file size and not changing it into a smaller photo... Is there a way I can check this?
    Thanks in advance for your help

    Yes it imports a byte by byte copy of the photo.
    What do you mean by 'size'? Do you mean file size? Or the dimensions of the photo (length by breadth)?
    You can compare simply by exporting the original out of iPhoto
    File -> Export, and set the kind to Original
    For help accessing your photos in iPhoto see this user tip:
    https://discussions.apple.com/docs/DOC-4491
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.

  • HT4858 with photo stream on and importing pictures from your camera into your Ipad - after 30 days the pictures will be removed from photo stream, but will the pictures still be in your Ipad ? andy

    with photo stream on and importing pictures from your camera into your Ipad - after 30 days the pictures will be removed from photo stream, but will the pictures still be in your Ipad ? andy

    To my knowledge, pictures in photo stream stay there untill there is more than 1000 of them, then after that the oldest ones are removed from photo stream.  If your photos have synced to your devices via photo stream or manual syncing they will be there until you elect to delete them.

  • How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    Photos that were synced from a computer won't show for copying to a computer. If you want to copy them back then you will need a third-party app on your phone such as Simple Transfer which can copy them off via your wifi network. But photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer (e.g. their dimensions might be different and their colours may look a bit different).

  • How do I get imported pictures (from my macbook pro) onto my iPhone 5?

    How do I get my imported pictures (from my macbook pro) onto my iPhone 5?

    Hey ther Caraaaaa,
    It sounds like you have some photos you have imported to your computer that you would like to sync to your phone. This article should help you navigate to, and configure photo syncing from iTunes to your device:
    iTunes: Syncing photos
    http://support.apple.com/kb/ht4236
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • HT201302 When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

    When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

    It sounds like you are using an application to import. You can do it manually.
    Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos).

  • How can I import pictures from my computer to iTunes without losing my iPhone pictures?

    Hey
    I'm wondering how I can import pictures from iTunes to my iPhone. I have taken pictures with a camera, not my iPhone camera. And I got the pictures on my computer, just don't know how to import them to my itunes and then to my iPhone. And I also don't want to lose all my iPhone pictures in my camera roll when I do this.
    Thanks

    Camera Roll is the folder on your iPhone which kept all the photos taken from your iPhone Camera or Photos received and saved from your email attachments.  They will remain in that folder until you delete them.  You may, however, import these photos to your Computer if you want to.
    Refer to this article:
    iOS: Importing personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/HT4083
    Now the other way round, if you want your Photos from your Computer(whether it's taken from other Digital camera or photos already on your computer) to be transferred to iPhone, you have to sync them over like I mentioned in the first reply.

  • HT1229 I cannot import pictures from iPhoto to Powerpoint

    I am unable to import pictures from iPhoto to Powerpoint 2011 :Need hekp; Using Mavericks  and updated Microsoft powerpoint also...
    Need urgent help..
    Thank you

    You do not ever directly access the contents of the iPHoto library - use the media browser - in the lower left of the insert window under media ==> photos ==> iPhoto
    See the user tip on accessing your iPHoto files for more info  --  https://discussions.apple.com/community/ilife/iphoto?view=documents
    LN

  • HT201077 I moved some pictures from my photo stream to an album in iPhoto.  The photo stream icon didn't disappear and I can't edit the picture .

    I moved some pictures from my photo stream to an album in iPhoto.  The photo stream icon didn't disappear and I can't edit the picture .

    Welcome to the Apple Community.
    Moving photos from photostream to your library just imports them, it doesn't remove it from photostream, therefore photostream won't disappear.
    Photos in photostream can't be edited, you can only edit photos that have been imported from photostream.

  • How can I get imported pictures from my ipad 3 to my laptop?

    Pretty much what the quetions states - "How can I get imported pictures from my ipad 3 to my laptop?"
    I've imported a load of pics from my Nikon D40 to my iPad 3 (ios 6.1) using the iPad camera connector. 
    So far so good.
    However I cannot sync the pictures to my laptop (win 7).  I would like to be able to keep the albums I have created, and get them to the laptop too.
    If a restore was required I might lose thee pics.
    Any advice or apps recommended to help me?
    Thanks in advance,
    Steve Potter

    To copy photos to your computer that were copied to it via the camera connection kit (or taken with it or saved from emails/websites) then see this page (as far as I know you can't copy their albums) - on a PC you can use the windows camera wizard

  • "the system cannot find the path specified" when importing pictures from iphone

    Hi!
    I have an iPhone 5s. My computer is a Windows, with the Windows 8 OS. I have never had a problem importing pictures from my iPhone to my computer until recently. Now, whenever I try, I get this error message:
    The following error occurred while importing IMG_1022.JPG:
    The system cannot find the path specified.
    What do you want to do?
    Try again
    Skip this file
    Skip all files with errors"
    I have tried again. I have tried skipping files. Either way, the photos and video will not import from my phone. It is filled up now and I cannot download anything else, or take any more pictures, until I get these files off the phone.
    Does anyone have any ideas?
    Thanks!

    Hi JeffWilko,
    What is your current situation?
    To receive better analyzation, please provide more details?
    1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
    2. Check the event viewer and share us the related error log.
    Please take the following steps for troubleshooting:
    1. Ping the printers
    2. Check if there are network firewall to block the access
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Incorrect file name when importing pictures from camera

    I am using PE 10 on Mac Snow Leopard.
    When I import pictures from my camera and select "Rename Files" with "Custom Date" + "Shot Date" (any format), the file name includes the custom name correctly, but the date part of the file name is some random date (with a weird year: 1913, 1969). Note the example shown on the Photo Downloader is usually the one used. The shot date in the meta data is usually correct. This appears to be similar to a problem when using the "Create Subfolder" option.
    Any ideas why or a work-around?
    I was using PE 8 and did not have this problem.

    Hi dannrendon2,
    Have you successfully run the PSE10_Hot.dmg file? You will not see any change in PSE10 or PhotoDownloader , it is just for fixing the issue of incorrect date format .
    Please follow all the steps mentioned in KB article link mentioned above. Finally when you installed the updater there would be a message of successful installation .
    If there is a failure in your updating process [In your case it is second attempt of updation, there may be a failure] , uninstall your application , check if there is any residual file in application folder under Elements Organizer or Photoshop Elements (delete them). Now again install PSE10 and try to update PSE10_HotFix.dmg updater. There should be a successfully completed message.
    Thanks,
    Nizam

Maybe you are looking for

  • Can't undo last move

    I am trying to add an undo function to this program. Here is what I have so far. I can't get the undo function to work for some reason. Any help is appreciated. // Five.java - main program for Five-In-A-Row Program import javax.swing.JFrame; ////////

  • Plz help me in learing WebDynpro?

    Hi Friends, I know ABAP and HR ABAP. And i know the concepts of JAVA(Core Java). Now, I want learn WebDynpro using ABAP or JAVA. I am very beginner in WebDynpro. I am having ECC 5.0 in my system. I am unable to create a simple webdynpro application w

  • Adding Additional Columns in LOV,That column capturing values from function

    My requirement: Adding Additional Columns in LOV,That column values capturing values returned by function..... Give me the ides to achieve this...

  • ABAP code help for Bex broadcasting by event!

    Hello I'm trying to broadcast a report for a specific time period as per factory calendar. I tried using System Time Point :RSRD_BROADCAST_FOR_TIMEPOINT but its not showing when In the broadcaster when I put restriction of factory calendar so i follo

  • How to edit tracks and disc number?

    I have the iPod Classic 160GB, and I have a Windows 7 desktop PC which has the latest version of iTunes. I am not sure what is the latest, but I always have it up to date. I have a lot of playlists for my iPod, and I have it labeled by the albums, so