Import Pinnacle Studio project files

I have several Pinnacle Studio 9 project that I would like to import in Adobe Premiere Elements 7. How can I do that ?

Export the projects as DV-AVIs, the universal language of PC based video editors. You can then import those AVIs into Premiere Elements.
You can not, of course, actually open a work in progress project file from Studio in Premiere Elements, though, and vice versa.

Similar Messages

How do I import Pinnacle Studio 15 videos into Adobe Premiere Elements 12?

I no longer have Pinnacle Studio after replacing crashed computer. I installed Premier Elements 12, but cannot figure out how to import all of my old videos.
Jim Engles

ATR,
Thanks for your interest and time. Sorry I did not explain myself initially.
The files I was trying to import were saved as Pinnacle Studio “project” files. So they must be .stx, as you say. In Windows Explorer I cannot determine the file extension; all I can see is the project folder name and subfolder names.
Now that I think about it, when I was last working in Pinnacle at least two years ago, I had the option on how to save my files and I saved them as “project.” In fact all of the backed up videos are under an overarching folder named my video projects.
I did find two backed up files with an .avi extension, which did import.
So the best solution would be to find a computer to borrow that has Pinnacle installed and open and save the files to export as .avi. If that doesn’t work, I will try to find a trial version of Pinnacle to use.
Years ago a coworker told me to buy Adobe Premiere instead of Pinnacle. I wish I had listened.
Thanks,
Jim Engles

Primavera import from MS Project file having .mpp extension

How can you import MS project file with .mpp extension to primavera p6v7. In primavera import options unseer Mocrosoft project it shows only .MPX and .XLM extensions.

You need MS Project installed on this same PC as P6.
Alternatively there was an old P3.1 utility that would convert .mpp to .mpx files.
See: "How to Convert MPP to MPX when Importing Microsoft Project Data into P3 [ID 892819.1]" in the Oracle KB for a download link.

Imovie9 wont import my imovie project file

I made a project on my ipad, but need to edit it no my computer. I have iOS 10.9 (maverick) and am using iMovie 10.0.3 on both machines. I following the instructions of;
- Going to project in ipad, htting export to Itunes.
-Connecting devices, finding the project in iTumes on my copmuter, uder Apps, then saving it.
- Opening iMovie on my computer, hitting import.
But then the project file is greyed out.
What can I do?

Hi There,
Reading your reply got me very excited, especially because it worked for Joe94r. But then...I tried it myself, to no avail. I did exactly as you had suggested. I copied and pasted the project to the iMovie Projects folder, and the Event it was linked with to iMovie events. I opened up iMovie and, while it recognized the Event, the project itself was nowhere to be seen.
Any ideas?

Importing bundle of project files (from j2ee tutorial)

I'm trying to import "guessNumber application" (http://java.sun.com/j2ee/1.4/docs/tutorial/doc/JSFIntro5.html) from <INSTALL>/j2eetutorial14/examples/web/ directory. How to do it in the RIGHT way (instead of copying this files to JDeveloper/.../myworks directory with the help of Windows Explorer)?

Under the file menu in JDeveloper there is an import option that will let you create a project from the WAR file.

How do import/export studio project to myeclipse?

Hello guys,
Is there a way to do this???
Thanks!

Hi,
Take a look at the below link
http://blogs.sun.com/roller/page/markdey/20060130
MJ

Migrating from Pinnacle Studio 12 Ultimate

Any suggestions on how to import PS12 Projects? (Source files to PSprojects are h264 off Canon Vixia HF10))

You can not import Pinnacle studio projects directly into PE7 and open them up. You would need to export your project from Pinnacle as a video file... if you wanted to maintain it in high definition you would need to export your timeline as HDV MPEG2 or H.264. Then bring this video into PE7 using Get Media, From Files and folders. You could then continue editing... but any effects, transitions etc added in Pinnacle would be "imbedded" in the video.

Importing MS Project file to CProjects

hi all,
<b>how to import a MS Project file to CProjects.</b>
please help me from scratch....
send any doc on that on
[email protected]
[email protected]
full points all be awarded..
regards,
niranjan

Hi
i have seen the thread
my error msg is as follows:
Error occurred when importing from Microsoft Project
Message no. DPR_UI_BSP116
Diagnosis
When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
The XML string contains errors because the values from Microsoft Project were transferred without verification.
Procedure for System Administration
Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
please give inputs on this...
regards,
Niranjan

How can I double-click a file to open it in default app in my Visual Studio project without creating an installer?

I have an app with code to open a file by double-clicking on it. The app in my Visual Studio project file should start automatically and then open the file automatically. I double-click on the file, then look for the app in my solution folder (I choose the
.exe in the Debug folder). Am I choosing the correct .exe file?
What I'm trying to do is test some code I wrote that will open the associated file type when I double click on it, as opposed to creating an installer, installing the app and then double-clicking on the file to see if it will open in the associated app automatically.

Hi dudefromthebronx,
Yes, I think you could doubt click the .exe file in your local machine.
Of course, maybe you could get it in Bin\Debug or Bin\Release folder, it is related to the current project settings.
But we would know some differences between them:
http://stackoverflow.com/questions/11600162/difference-between-bin-debug-and-bin-release
https://social.msdn.microsoft.com/Forums/en-US/0cde96e6-8dd8-4aa9-adcf-d7f45da13b66/debug-bin-release-folders?forum=vbide
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Importing project files into Premiere Elements 7

I have created a new project, imported several video clips and then created a video. It was only at the point of creating the video that I reliased that I had not created the project with the correct settings.
Although the video looked fine in the editing window, the final video had black bars at the sides, and above above and below the video, and fairly think black bars. I've tried exporting as different formats, and changing the aspect ratio, but this has not helped. I've attached a jpeg of what the video looks like in Quicktime.
Other video editing software I have used, has the ability to change the project settings after it has been created, and give a warning to the user about possible problems they may encounter by doing so.
This does not appear to be the case with Adobe Premiere Elements 7, and it is extremely frustrating!!
One thing which appears to be possible with Premiere Pro, and was also available on other editing software I have used, is the ability to import projects.
So... does anyone know if it is possible to import a Premiere Elements 7 project file into Premiere Elements 7? The aim here is to create a project with the correct settings, and then import the existing project file into the timeline.
I've tried hacking the project file, which has improved the video slightly, but still not what I was expecting.
Cheers
Paul

This problem should have been picked up by Adobe's test analyst during testing of the product.
I am sorry, but I am not following you on this. There are Presets to match many media types. I am not at all sure how Adobe could anticipate that a user would choose the wrong one.
As I said, PrPro CS4 will both allow you to Import your .PREL (with the caveats mentioned), and work on the Project with Sequence settings to match. Unfortunately, PrE is a much less sophisticated and expensive program, than is PrPro CS4.
I'd be happy to Import your file, in PrPro with the proper Presets, but the rub would be that PrE cannot Open .PRPROJ files, so you still could not edit it.
Sorry, but the first rule of any NLE is to establish Presets that match one's Assets. PrPro CS4 (not before that version) allows one to cover their mistakes a bit, but there is still some work getting the improperly set Sequence's material into a new, properly set Sequence.
If you have access to PrPro CS4, and can finish your Project there, that would be the best. Next would be to create a New Project with the proper Presets and chalk up the lost time as a learning experience.
Sorry ot bear the bad news.
Good luck,
Hunt

Project files creating dup assets (but not imported via scan)

I've looked at these two threads: http://discussions.apple.com/thread.jspa?messageID=9147105#9147105
and
http://discussions.apple.com/thread.jspa?messageID=9096958&#9096958
which sort of address my question.
I do not import media via scan. I am attempting to import project files with associated media. I import a project file and it imports the media assets as well. Here's the problem. When I then go and import another project file with many of the same assets, FCSvr creates duplicate assets, but only if I import the second project file soon after the first. I waited a week and tried it, and no duplicate assets were created. I have setup periodic scans on my Library Device which is an EIP device and which is where I'm sending the files that get imported. The scans are setup to run every 10 mins or so but don't seem to have an effect. So why does this work if I wait more than a day or so and can I manually kick off the scan or whatever process I need to setup so that I avoid getting duplicate assets.
Again, I don't want to originally import the media via scan of an EIP device b/c I want to do set some metadata fields on multiple assets but not all assets in the project.
I'm really just curious what process it is that tells FCSvr that these assets already exist in the db and filesystem and how I can manually kick it off.
Any enlightenment would be great.
Thanks.
H.

You probably have a full scan running overnight, which is what is catching all the media. The add only scan you have running every 10 minutes only get new media that is written to the EIP device.
If that doesn't seem to address your question, then try rephrasing it. It's difficult to understand from your explanation what you have running where, and what you're uploading where.

How to import DVD Studio Pro Menu into Motion?

I would like to change the colors of one of the templates in DVD Studio Pro. In particular the .psd menu file. Is there a way to import the .psd file into Motion and change the color. Or maybe there is an easier way of doing this. Any help would be appreciated.

Yes you can. You can import a Motion project file directly into DVD Studio Pro, though when I tried it took a loooooong time (depends on the size and complexity of the project of course). Here's a tutorial on how to do that:
http://www.wonderhowto.com/how-to-use-dvd-studio-pro-4-with-motion-53426/
OR... you can just export your Motion project and import it into DVD SP as a Quicktime file, and put that in the Menu section. Then you can add your buttons and so forth and proceed from there.
I hope this helps. Good luck!

Need someone on PC to open and save Pro 1.5 project file in CS3

I am trying to salvage one of my old project files from when i worked on a PC. i can't do this because CS3 for Mac won't import old PC project files.
If anyone would be so kind as to accept my small project file and save it in Premiere Pro CS3 on their PC i would be much obliged.
-Dave

theaveragedave,
On the Mac, the Project file will *usually* appear without any file extension. Instead there will be one, or more, "helper/locator" files. These will usually be the filename, but with "._" (or similar) prepended to it. These are of no use to a PC.
All that I did was Copy the Project files to a new folder, and in it, added the ".prproj" extension. All opened fine. (Actually, since this was a pre-Pro version, I think that I added ".proj," but you would use ".prproj.")
If I were going to "convert" the Project, I'd gather up all Assets, keeping the folder structure exactly the same. Gather up the Project files (renaming, as is necessary), and furnish all of this to the person doing the conversion. This *should* keep your Asset Links working*. The other option would be to just convert the Project file, but then you will have to manually re-Link every Asset. If one gets lucky, and the Assets are stored in one folder, PP *might* be able to have you locate the first missing Asset, and then automatically locate the rest. I hesitate on this last comment, because you will have converted the Project, so things do not always work 100% the way they would otherwise. I had to do a lot of re-Linking, but I was jumping several versions and from Mac to PC. Still, once the Assets were re-Linked, all has worked perfectly.
Good luck finding a PC operator with CS3. Should not be that hard. Wish I could help you more, but CS2 won't cut it, for what you need to do.
Hunt
* Keeping the drive letter the same will be a big step to keeping your links. Let's say that you are working on your D:\ drive (sure that Mac would call it something else), and you copy over to an external. I'd have the PC operator copy the Assets (with folder structure) to their D:\, just to keep the Links. Does this make sense?
PS one little consideration is Mac's not using NTSF HDDs and the file size limitation of Fat-32 HDDs. However, you already have your Project and its Assets on a Mac, so this is probably moot.

Question About Project File Location

I was wondering how important is the project file location when it comes to performance?
Currently, I store all of my adobe project files(AE, PRP, ENC) on my SSD along with my OS and applications.
Btw, I am familiar with the guidelines for disk usage, but cant seem to find anything that has covered this specific question.

My C:\ is an SSD, and that is OS and programs only. My D:\ is a fast WD 500 GB Raptor, and is reserved for Page file, My Documents. digital photos, and Video Projects. E:\ and F:\ are both WD RE4 RAID0s, so all my drives are fast.
I keep files which are frequently re-written, or replaced, off my SSD to avoid any risk of degradation due to repeated re-writing to the memory.

TutWD_FlightList_Init .project file missing

Hello,
I am trying the TutWD_FlightList_Init tutorial.
I have downloaded the project.
For the first time I could successfully import this project into my workspace , however while creating model i was getting jjava.lang.NullPointerException.
So also when I tried to import this project for the second time into my workspace , while importing it said .project file missing.
Can anyone suggest the possible solutions to resolve the issues I am facing.
Thanks & Regards
Pooja

Hi,
Removing the .metadata folder and restarting NWDS fixed my NWDS as well.
I think you have to downloaded TutWD_FlightList_Init this application in SDN right. May be that application having some problem you can create application in own way. I think you are new to webdynpro JAVA right. Please read this [Document|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/web-dynpro-java/_web-dynpro-java/WDJava%20archive/Creating%20a%20Web%20Dynpro%20Application%20Accessing%20ABAP%20Functions.pdf]
[Web Dynpro Java Sample Applications and Tutorials for SAP NetWeaver 2004|http://www.sdn.sap.com/irj/sdn/nw-wdjava?rid=/webcontent/uuid/503f22f6-b978-2a10-bf97-ddc21267e752]
Hope this helps!!
Best Regards
Vijay K
Edited by: VijaySAPEP on Feb 21, 2012 5:28 PM

Import Pinnacle Studio project files

Similar Messages

Maybe you are looking for