Import PO - Cenvat postings
Hi
I am mapping excise to SAP. In import PO(vendor currency is USD) I ve given 100 USD as CVD.While doing GR , the material cost is converted to Local currency and debited to stock account. But in Cenvat InpBED account is debited in lical currency but no conversion is happening,
ie Cenvat postings are Cenvat inpbed 100 INR dt
Cenvat clearing 100 INT cr
In Cenvat postings the USD to INR conversion is not happening.
How i can solve this?
Rewards assured
regards
B Shar
Hi
At the time of customs MIRO, postings are done in automatically done in EURO, But during Goods receipt , the normal account postings are happening in EURO ( Stock account and GR/IR account), but excise postings are in INR (envat Inp BED and Customs Provisions).
This is not correct as CVD in PO in Euro. The system is picking numeric value in CVD but currency conversion is not happening.
regards
B shar
Similar Messages
-
CENVAT postings and calculations.
We maintain the tax code with the help of which system calculates the taxes on items.
In tax code we maintain the condition types for calculation of taxes.How can i check how much amount has been paid as BED for example and other taxes on purchase of various items in a specific period.
Also how G/L accounts are assigned to various taxes or condition types.What is the significance of account keys in calculation schema?
Also how does sytem calculates the CENVAT amount( from where does the system get all information about calculation of CENVAT) and post it to the system.
Also in PO whether we have to mention the tax code everytime ,and is there any direct relation of tax code > material, taxcode> vendorHi Deepika
Here i am giving you snap shot of CIN in SAP first you understand following example
Suppose you have purchase raw material so for this whatever excise duty you have paid is recordinf Separately in the register named RG23A. Similarly in case of Capital its known as RG23C.
The only difference between them is that in case of RG23A full value of excise goes to regaister.Suppose on total value of PO 100rs you pay excise 16% i.e. 16 and education cess is 2% i.e. 0.32.
In this case RG23A will updated as follows at the time of MIGO
Excise Entries
RG23A BED 16.00
RG23A Ecess 0.32
Cenvate clearing account -16.32
Stock Enteries
Stock account 100
Gr/IR account -100
In case of capital only 50% of duty goes to the register rest of Excise amount goes to hold.If we take above example then following transaction happens
Excise entries
RG23C BED 8.00
RG23C Ecess 0.16
Cenvate on hold 8.16
Cenvat Clearing account -16.32
Stock Entries
Stock account 100
Gr/IR account -100
After one year of this excise transaction on hold amount of capital goods can be transferred to registers according to excise law.For this transaction code is j2i8.
in PART1 entries also there is excise invoice details ?
Ans --> In excise invoise qty you are reciving are treated as part 1 entries at the time of capturing invoice part1 of respective excise register gets updated.
afetr posting excise invoice, what about invoice verification ?
At the time of invoice verification
following entries passes on if we take above example
Vendor account - 116.32
GR/IR account 100.00
Cenvate clearing acc 16.32
I hope this would clarify doubts regarding entries
Another regsiters used are
RG1 --> For Finished good means at the time of sending them out this registe updates
Now next
<b>Also how G/L accounts are assigned to various taxes or condition types.What is the significance of account keys in calculation schema</b>
These are assigned according to Excise transaction Type for example for goods recipt we use GRPO so we assigne GL codes w.r.t. Excise Group Excise TT and Company Code at
IMG--> Logistic General --> Tax on Good Movement --> India --> account Determination --> Specify GL codes to excise Transaction Type
Then Excise Transaction type are determined according to Movement type which can check here
IMG--> Logistic General --> Tax on Good Movement --> India --> Business transaction >Incoming Excise Invoice> Specify which Movement type Involve Excise Invoice
I hope now you can get clear picture of CENVAT postings and calculations
Regards
Vivek
-- Reward for the Efforts -
Asset procurement (Import)CAPE
Hi gurus,
When we post the excise invoice the system shows an error message"Cenvat postings not possible".In this case the goods receipt is valuated.
I have maintained the excise master properly for the capital material,asset account assignment in PO,all account determinations for CAPEand tax classifications.
Will you please help me out.
With Regards,
RajashekharHi Raj,
Kindly mainatin the below setting,
1) Maintain the Excise transaction per Excise Account for
India->Account Determination->Specify Excise Accounts per Excise Transaction
Note:Create subtransaction IP for Import.
CAPE IP CR Credit CLEAR CENVAT clearing account
CAPE IP DR Debit ONHOLD CENVAT on hold account
CAPE IP DR Debit RG23AED RG 23 AED account
CAPE IP DR Debit RG23AT1 RG 23 AT1 Account
CAPE IP DR Debit RG23BED RG 23 BED account
CAPE IP DR Debit RG23ECS RG 23 ECS Account
CAPE IP DR Debit RG23SED RG 23 SED account
2) Maintain Account determination for Excise transaction CAPE-IP
India->Account Determination->Specify Excise Accounts per Excise Transaction
Excise group ETT Sub Tran Comp Code G/l Accts
CAPE IP
Regards
Sanjay L -
hi,
please, anyone can explain.
may i know what is this cenvat account, cenvat clearing account and cenvat on hold?
can have example of these 3 accounts? what's the difference for these 3 cenvat account with PLA on hold or various PLA account like plaaed, plabed, plaecess, plased)?
point will be given. thanks
For Domestic Procurement of Raw Material
During GR
Material Stock Dr.
GR/IR clearing Cr.
During Excise Invoice Credit
Cenvat Account Dr.
Cenvat Clearing Cr.
During Invoice Verification
Cenvat Clearing Dr.
GR/IR Clearing Dr.
Vendor Payable Cr.
For Domestic proceurement of Capital Goods
During GR
Material Stock Dr.
GR/IR clearing Cr.
During Excise Invoice Credit
Cenvat Account Dr. (50%)
Cenvat On-hold Dr. (50%)
Cenvat Clearing Cr.
During Invoice Verification
Cenvat Clearing Dr.
GR/IR Clearing Dr.
Vendor Payable CrHi,
may this will be helpful to you.
In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing scenario's. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Here is some information on CIN Configuration. While it may not appear understandable as given below, it will be understood better when you check on screen.
Country Version India comes with four pricing procedures as follows:
· JINFAC (Sales from manufacturing plants)
· JINEXP (Export sales)
· JINDEP (Sales from depots)
· JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
Enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID and state:
· Which taxes the registration covers (additional excise duty, special excise duty, and cess)Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
· The maximum number of items to be printed on each excise invoice
· Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise Duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
? Specify whether it is a manufacturing site or a depot.
? Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, Multiple credit
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
? Define excise series groups based on type of outgoing document
? Assign series group to excise registration ID
? If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
? If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
? If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
? If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
? Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
? Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
? Specify the conditions in the sales order that are used for excise rates.
? Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
Make the settings in Customizing Basic? India?for Logistics - General, by choosing Taxes on Goods Movements Account? Excise Duties Using Condition Technique and ...?Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data?access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.?
You maintain the following types of data:
? Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
? Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type - for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
? Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
? Material master data
Each material is assigned a chapter ID.
? Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Let's assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use : In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
? For taxes on purchases, use the condition types contained in the tax procedure.
? For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
? VS1 (basic excise duty)
? VS2 (additional excise duty)
? VS3 (special excise duty)
? VS5 (sales tax setoff)
? MWS (central sales tax)
? MW3 (local sales tax)
? ESA (service tax)
? ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
? Excise group
? Company code
? Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
? Defined the G/L accounts
? Defined the excise groups
? Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
? Material Master ? Logistics General ?1. Go to IMG Define Structure of Data Screen for each?Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is "Foreign Trade: Import Data". Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 - 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade - Import, Excise related subscreen appears.
Back to ERP Operation Home.
Transaction Codes for India TransactionActionJ1I2Prepare a sales tax registerJ1I3Create outgoing excise invoices in batchesJ1I5Update the RG 1 and Part I registersJ1IEXIncoming Excise Invoices (central transaction)J1IEX_CCapture an incoming excise invoice (excise clerk)J1IEX_PPost an incoming excise invoice (excise supervisor)J1IF01Create a subcontracting challanJ1IF11Change a subcontracting challanJ1IF12Display a subcontracting challanJ1IF13Complete, reverse, or recredit a subcontracting challanJ1IFQReconcile quantities for subcontracting challansJ1IFRList subcontracting challansJ1IHMake a CENVAT adjustment postingJ1IINCreate an outgoing excise invoiceJ1IJAssign excise invoices to a delivery for sales from depotsJ1INJVAdjust withholding tax ItemJ1INREPReprint a withholding tax certificate for a vendorJ1IQYear-End Income Tax Depreciation ReportJ1IRDownload register dataJ1ISProcess an excise invoice (outgoing) for other movementsJ1IUProcess exemption formsJ1IWVerify and post an incoming excise invoiceJ1IXCreate an incoming excise invoice (without reference to purchase order)J2I8Transfer excise duty to CENVAT accountJ2IURemit excise duty fortnightlyJ2I9Monthly CENVAT returnJ1IGExcise invoice entry at depotJ1IGACreate additional excise entry at depotJ2I5Extract data for excise registersJ2I6Print excise registers -
CHANGE OVER FROM TAXINJ TO TAXINN
HI ALL ,
TAXINJ and TAXINN cannot co exist in the same system.
If you are talking about technical Upgrade, then I don't think this would be feasible since old Txn would have got posted with TAXINJ procedure with rates as defined in Tax codes and now after migration to TAXINN in same box, the system would pick value from Condition records.
Just check this basic point of feasibility before we go ahead and look for changes.
In SuN the change is for existing implementation, here at present they have R/3 4.7, and are now in the process of technical upgrade to ECC 6.00; TAXINN is required to be implemented in the upgraded version.
At present they are using around 129 pricing procedures, 25 sales org,220 tax codes in TAXINJ. Suzlon has 21 company codes, 219 plants and 1300 end users the whole nature of group activities results in use of all possible types of indirect taxes in India like VAT, CST, Excise, Service Tax etc...
i have tried to search on sap help, service market place and others but could not come across any document for the change over. However i will try again.
what are the things i need to take care before any implications busisneww point of view, what will be the status of open sales order and purchase orders, and splitting delivery docs. which are under process, what will be the cutoverstrategy.
need ur help and guidance, thanks in advance.
We are migrating from 4.7 to ECC 6.00 ( technical upgrade only), at the same time we will shift from TAXINJ to TAXINN,please let us know the steps requred to do this activity.
RELEASE NOTES OR OSSNOTES, ANY DOCUMENT STEP BY STEP IS REQUIRED asap.
CHEERS
SRI_CNUHi
Vasu Sri,
I got this document from some body might help u a bit.
Condition-Based Excise Determination in MM (New)
As of SAP R/3 Enterprise Core 4.70 (SAP_APPL 470), the system can calculate excise duties
and sales tax in Materials Management (MM) using the standard condition technique.
SAP has enhanced the existing tax procedure, TAXINJ, so that it now supports formula-based
and condition-based excise determination. The R/3 System also comes with a new tax procedure,
TAXINN, which only handles condition-based excise determination.
Which Tax Procedure Must I Use?
Existing customers must continue to work using the same tax procedure.
If you switch to a new tax procedure, you cannot display any documents that you have already
posted using the old tax procedure.
If you have worked with formula-based excise determination in previous releases and wish to
continue, you do not have to do anything. However, if you wish to start using the
condition-based excise determination method, proceed as specified below.
We recommend that new customers use the condition-based excise determination and tax
procedure TAXINN.
<b>How Do the New Functions Work?</b>
First, customize the system in the activities listed below. Then, for each material, create one
condition record for each form of excise duty and sales tax that applies, and enter the tax code
for purchasing documents (see below) in every condition record.
When you come to create a purchase order, enter the tax code in each line item. The tax code
tells the system whether to look in the condition types for formula-based or condition-based
excise determination
To set up the new excise determination method, carry out the following activities:
IMG activity
What to do
Check Calculation Procedure
Existing customers: Adjust your tax procedure to
match the changes to TAXINJ. Steps 560-583 are new, as are 593-598.
New customers: Create a copy of TAXINN.
Select Tax Calculation Procedure
New customers only: Assign the copy of
TAXINN to India.
Maintain Excise Defaults
New customers only: Enter the condition type
that you use for countervailing duty.
Define Tax Code for Purchasing Documents
Define a tax code.
Assign Tax Code to Company Codes
Assign the tax code to the company codes that it
is relevant for.
Classify Condition Types
Specify which condition types you want to use
for condition-based excise determination.
Define Tax Accounts
Check which G/L accounts the various taxes will
be posted to. Define G/L accounts for the account keys used in the tax procedure
6 MM
Materialwirtschaft
16.1 Country Version India in Standard R/3 System
Verwendung
As of SAP R/3 Enterprise Core 4.70 (SAP_APPL 470), Country Version India is no longer
delivered as an add-on but as part of the standard R/3 System.
Integration of functions in the SAP Easy Access menu
The functions for withholding tax have been integrated into the SAP Easy Access menu, under
Accounting -> Financial Accounting -> Accounts Payable -> Withholding Tax ->
India and Accounting -> Financial Accounting -> Accounts Receivable -> Withholding
Tax -> India.
You can access all other functions using the area menu J1ILN, which you can call from the
SAP Easy Access screen using the transaction code J1ILN.
Country Version India Implementation Guide
The Country Version India Implementation Guide (IMG) has been integrated into the standard
Reference IMG (see Changes to Structures for Country Version India).
Release Notes
You can access release notes from previous add-on releases using the links below.
SAP Library Documentation
The SAP Library documentation for Country Version India is also delivered on the standard
SAP Library documentation CD (see below).
New and Changed Functions
For information about new and changed functions for Country Version India, see the other
release notes for this release.
Auswirkungen auf den Datenbestand
You do not need to change any data.
Auswirkungen auf das Customizing
IMG activity
What to do
Activate Country Version India for Specific Fiscal Years
Delete the entry ZIND and
create a new entry for IND.
Siehe auch
SAP Library -> Financials or Logistics -> Country Versions -> Asia-Pacific -> India.
Release Notes from Country Version India Add-On (FI)
Release Notes from Country Version India Add-On (SD)
SAP AG
1
SAP-System
Page 9
Release Notes from Country Version India Add-On (MM)
16.2 Condition-Based Tax Calculation (New)
Verwendung
As of SAP R/3 Enterprise Core 4.70 (SAP_APPL 470), a new method for calculating taxes
in Brazil is available, which makes use of the standard condition technique. Tax rates, tax laws,
and special indicators that influence whether tax line items are included in the nota fiscal are all
stored in the system as condition records. An additional tax calculation procedure, TAXBRC, is
delivered for this new method, in addition to the existing one for Brazil, TAXBRJ.
Auswirkungen auf den Datenbestand
You can continue to calculate taxes using the former method: when the system processes the tax
procedure assigned to the country (TAXBRJ), it calculates the taxes externally by calling
function module J_1BCALCULATE_TAXES. We do, however, recommend that you assign the
new procedure TAXBRC and use the condition-based tax calculation functions, as it enables you
to flexibly adapt the tax calculation logic to cover new legal requirements or special customer
needs.
You will need to migrate your existing tax rate table entries to condition records, which you
can do directly from the Tax Manager's Workplace described below. You can check all tables
and subsequently convert the entries, whereby the system generates condition records. After the
initial migration, each time you create or change a tax rate table entry, the system automatically
generates a condition record as needed.
Auswirkungen auf das Customizing
If you want to employ the new condition-based tax calculation, you need to activate it and
carry out all related Customizing activities, under Financial Accounting -> Financial
Accounting Global Settings -> Tax on Sales/Purchases -> Basic Settings -> Brazil
-> Condition-Based Tax Calculation, all of which are new:
o
Activate Condition-Based Tax Calculation
o
Map MM Tax Values to Nota Fiscal Fields
o
Map SD Tax Values to Nota Fiscal Fields
o
Map MM Tax Laws to Nota Fiscal Fields
o
Define Internal Codes for Tax Conditions
o
Assign Internal Codes for Tax Conditions to Condtion Types
o
Assign Tax Rate Tables to Condition Tables
In addition, you need to assign the new tax calculation procedure TAXBRC to the country in
Customizing, under Financial Accounting -> Financial Accounting Global Settings ->
Tax on Sales/Purchases -> Basic Settings -> Assign Country to Calculation Procedure.
A new Customizing tool called the Tax Manager's Workplace is available that enables you to
SAP AG
2
SAP-System
Page 10
make all tax-related settings for Brazil. You access it under the same path as above through
Tax on Sales/Purchases, then Calculation -> Settings for Tax Calculation in Brazil ->
Access Tax Manager's Workplace, or alternatively by entering transaction J1BTAX. You can
use the Tax Manager's Workplace regardless if you use condition-based tax calculation; it
simply brings all tax activities to a single transaction (only the Migration, Nota-Fiscal Mapping,
and Condition Mapping options under the Condition Setup pulldown menu are relevant only for
condition-based tax calculation).
16.3 Changes to Structures for Country Version India
Verwendung
As of SAP R/3 4.7, Country Version India is no longer delivered as an add-on, but forms part
of the standard system.
SAP has discontinued the Country Version India Implementation Guide (IMG) and has added its
activities have been added to the standard Reference IMG as follows:
Activities relating to withholding tax are now located in Customizing for Financial
Accounting (FI), under Financial Accounting Global Settings -> Withholding Tax.
Activities relating to excise duty and excise invoices are in Customizing for Logistics -
General, under Tax on Goods Movements -> India.
As far as the activities under Preparatory Activities are concerned, two of them (Activate
Country Version India for Accounting Interface and Activate Processes) are no longer
relevant and have been removed from the IMG entirely. The activity Execute Country
Installation Program is already included in the standard IMG under the name Localize Sample
Organizational Units. And the other two activities (Activate Country Version India for Specific
Fiscal Years and Activate Business Transaction Events) have been added to the standard IMG.
For information about other changes to the IMG relating to changes in the functions in Country
Version India, see the other release notes.
16.4 Release Notes from Country Version India Add-On (MM)
Verwendung
The Release Notes from Releases 3.0A and 4.0A of Country Version India for Materials
Managment (MM) are listed below. For more Release Notes, see the alias globalization in
SAPNet, and choose Media Center -> Country-Specific Documentation -> Country Version
India - Release Notes.
Release 3.0A
o
CENVAT Credit on Capital Goods After Budget 2000 (Changed)
o
Multiple Goods Receipts for Single Excise Invoices
SAP AG
3
SAP-System
Page 11
o
Enhancements to CVD Solution
o
Pricing Date Control in Excise
o
Order Price Unit in Excise
o
Alternate Assets MODVAT Capitalization
o
Enhancements for 57 F4
o
User Exits for Customer Validations
Release 4.0A
o
Procurement Transactions for Excise Invoices
o
New Transactions Based on User Roles for Incominng Excise Invoices
o
Capture Excise Invoices with Reference to Multiple POs for the Same Vendor
o
Capture Excise Invoice and Post CENVAT in a Single Step
o
Open Schedule Quantity Defaulted in Excise Capture for Scheduling Agreement
o
Accounting Document Simulation for CENVAT Postings
o
Rejection Codes for Excise Invoices
o
Single-Screen Transaction for All Excise-Related Entries
o
Stock Transfer Orders Through MM Route
o
Excise Invoices for Multiple Import Purchases
o
Customs Invoices Can Be Captured Using Logistics Invoice Verification and Conventional
Invoice Verification
o
Material Type at Line Item Level
o
Excise Invoice Capture Without PO
o
Excise Invoice Without PO - Capture and Post in a Single Step
o
Recalculation of Duty and Excise Defaults Restore Feature Available
o
Split of Nondeductible Taxes During Excise Invoice Capture
o
Error or Warning Messages Displayed at the Time of Saving
o
Reversal of Excise Duty
o
MIGO Solution Available as a Note 0408158 (Featuring All Functionalities as in MB01)
o
Excise Invoice Defaults in Excise Popup at Goods Receipt
o
Split Accounting Lines for CENVAT Posting
o
Authorization for Incoming Excise Invoices Extended
o
Authorization Available for Part I Entry at GR
o
Authorization Available for Register Update Transaction
o
User Exit Available for Incoming Excise Invoice Transaction for Defaulting Values
SAP AG
4
SAP-System
Page 12
o
User Exit Available for Incoming Excise Invoice Transaction Before Database Update
o
User Exit Available for Register Update for Validations on Fetched Records Based on
Selection Criteria
o
User Exit Available for Register Update of RGSUM Register
o
User Exit Available for Excise Invoice Create for Other Movements to Default the Excise
Details
o
Register Update Separately Handled for Receipts and Issues Based on Classification Code
o
Ship-From Vendor Can Be Defaulted and Captured in Incoming Excise Invoices for Other
Movements
o
Removal Time Can Be Captured in Excise Invoices for Other Movements
o
Field Selection of Incoming Excise Invoices
o
Transaction Code Customizing for Incoming Excise Invoices
o
Excise Group Setting for Part I Indicator for Blocked Stock, Stock Transfer Order, and
Consumption Stock
o
Multiple Goods Receipts and Multiple/Single Credit Settings Available at Excise Group
Level
o
Rejection Code Master Setting for Posting on Hold Is Available
o
Stock Transport Orders -
hi,
can any one tell me the role of CIN in sales and distribution, if possible
post some material regarding CIN configuration.
my e-mail id: [email protected]
thank you.Hello Sriram,
CIN in other words "Country Version India" is basically used for taxation purposes. Every country has its own tax system..........so SAP has come up with its own country versions for taxation like CIN for India.
<b>The following is the detailed notes on CIN:</b>
Basically Cin is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important point is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Maintenance screen, which you can MasterExcise Rate access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use : In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure of Data ScreenMaterial Master Configuring the Material master Screen Sequence. for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
MASTER MAINTENANACE.:
Transaction Code : J1ID
1. Chapter id Description Master : - Excise chapter id and description as per law will be maintained in this master. With out maintaining the chapter id in this master we can not proceed to other masters. Maintain the chapter id in format xxxx.xx
2. Material / Chapter id combination :- Excisable materials with chapter id details for a plant is maintained in this master. In case of Raw and Packaging materials we will be maintaining for branch plant only. But in case of FG even CPs details will be maintained. If the material is a base material used for subcontracting then give a tick in the check box in the coloumn subcontrs. Choose relevant material type from drop down menu. In the coloumn GR-xref, select Multiple GR for one Excise invoice-Multiple credit from the drop down menu. Enter 1 in the declared coloumn. With out this value in this coloumn the material will not be subjected to excise procedures.
3. Material assessable Value:- In this master, plant wise (including CP plants) assessable values for FG are to be maintained. MRP per CBB and per ATC will be enetred in Net dealer price coloumn. Assessable value per CBB and per ATC will be given in Assessable value coloumn with effective date in the valid from coloumn. Since it is not possible to maintain differential MRP for the same SKU in this master, the MRP and Assessable value details for despatches from branch plant will be maintained in SD module. In this case we should not maintain the details in this master for branch SKUs and details will be maintained only for CPs.
4. CENVAT determination :- Plant wise MODVAT input materials will be listed in this master with one of the FG as the out put material. This master will be maintained for branch plants only. If the input material is not maintained in this master MODVAT credit can not be availed.
5. Vendor Excise details: - Vendor Excise details such as ECC no, reg no, Exc.range, Exc.div, Exc.coll, CST, LST nos, PAN no will be maintained for all Excisable materials vendors. In the coloumn Exc.ind.ve enter 1. With out this value in this coloumn the MODVAT procedure will not take place. We are not maintaining SSI status in this master.
6. Customer Excise details:- For such of those customers for whom invoices are to be raised from branch plant details are to be maintained in this master. The excise details can be blank for customers bur CST and LST no are to be entered. In the coloumn Exc.Ind.Cus. Enter 1. With out this value in this coloumn, Excise invoice will not be generated for the customer.
7. SSI rate: - We will not be maintaining this master. At the time of capturing the MODVAT details we can enter actual duty details as per the Excise invoice received from the Vendor.
8. Excise indicator for Plant:- Excise details such as ECC no, Range etc. for the branch plant will be maintained here. In the coloumn Exc.ind.co maintain a value1
9. Excise indicator for plant and vendor and Excise indicator for plant and customer: - Initial Configuration masters need not be maintained by users.
10. Excise tax rate: - Chapter id and tax rates combination is maintained in this master. In the ExcInd coloumn enter1.
11. Cess rate:- Cess rate if applicable will be maintained in this master.
12. Exceptional material excise rates:- If differential excise rates are applicable for a material falling under same chapter id , this master will be maintained.
13. Quantity based AED & SED: - If applicable the details will be maintained here.
Some of the check points pertaining to Masters.
For raw materials, the assessable value will be picked up from PO.
For FG, the assessable values only for CPs are to be maintained in this master.
Excise indicator in Vendor / Customer excise details is mandatory.
Chapter ID, material Chapter ID and Excise tax rates - should contain all the relevant tax details.
CENVAT determination correlates the raw material to finished goods. All new materials are to be added without fail.
Material Chapter ID - for conversion activity (only base matl.) sub-contracting indicator has to be checked.
Material Chapter ID- excise indicator is to be ticked.
For removals from branch plant (raw material/finished goods), CST/LST numbers have to be given in the customer masters, which is used in Excise invoice printing
Path is : IMG - Logistics General - Tax on goods movement - India
http://help.sap.com/saphelp_47x200/helpdata/en/5a/d34a9f544811d1895e0000e8323c4f/frameset.htm
<b>Reward if helps</b>
Regards,
Sai -
What is vat where we add in sales order
hi gurus
what is vat how we add in sales order if we do for cin what are the steps
is it order, delivery invoice, excise invoice
va01,vl01n,vt01n,vf01, j1,IIn,
is it correct or not
thanks in advanncedear nag
VAT is value added tax
if you want steps for CIN gothrough this
Basically CIN is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
Make for Logistics General, byIndia the settings in Customizing Basic Excise Duties Usingchoosing Taxes on Goods Movements Account Settings Determination.Condition Technique and
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate access from the SAP EasyMaintenance screen, which you can Master DataAccess screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Data 1. Go to IMG Define Structure ofLogistics General forMaterial Master Configuring the Material master Screen Sequence.Screen each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
Transaction
Action
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challans
J1IFR
List subcontracting challans
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
rewards if it helps
siva -
CIN configuration in TAXINJ and TAXINN !!
Friends !!
Please help in configuring TAXINJ and TAXINN for VAT, Higher Edn.cess.If possible send me screen shots for the same and how to maintain taxcodes.
Thanks.
Yours sincerely,
sreedharDear sreedhar kodali,
CIN Means Country India Version
In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenarios. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
Country Version India comes with four pricing procedures as follows:
- JINFAC (Sales from manufacturing plants)
- JINEXP (Export sales)
- JINDEP (Sales from depots)
- JINSTK (Stock transfers
CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
In this IMG activity, you maintain the data relating to your excise registrations.
- Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
- For each excise registration in your business create a registration ID, and state:
- Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
- The maximum number of items to be printed on each excise invoice
- Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
ECC Number: Specifies the organization's ECC number.
Excise Registration Number: A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division: Specifies the excise division in whose area the excise registration is located.
Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming, AED usage Additional Excise duty Percentage.
These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements. This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description: Description of the excise registers set.
Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings.
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings.
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator - Excise year start month. The calendar month marking the beginning of the excise year. This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection Number of days from document date for excise invoice selection.
Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
Document type for TDS FI posting: Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts. The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type - Key representing a type of exchange rate in the system.
- You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
Plant Settings - In this activity, you maintain excise information relating to your plants.
For each plant:
- Specify whether it is a manufacturing site or a depot.
- Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- Number of goods receipt per excise invoice.
- Multiple GR for one excise invoice, Single credit
- Multiple GR for one excise invoice, multiple credit
Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
1. Create one excise group for each set of registers that you need to keep.
2. Assign the excise groups to plants.
3. Maintain whether this Excise group is for a depot or not.
If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to. At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- GR Per Excise Invoice
- Multiple GR for one excise invoice , Multiple credit
- Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background. - If you want to make use of this function, you must also define the
default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step. If this is not selected then you need to separately do RG23D selection
followed by PGI and then RG23D verification and posting. If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
- Blocked stock
- Stock transport order
- Consignment stock
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
- If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
- If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
- Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
- Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
- Specify the conditions in the sales order that are used for excise rates.
- Specify the countervailing duty condition type used for import purchase orders.
See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Customizing : Make the settings in Customizing Basic -> India -> for Logistics General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and -> Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for. On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
- Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
- Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
- Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
- Material master data
Each material is assigned a chapter ID.
- Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
status 7.
Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
determination.
- Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
- Assign Tax Code to Company Codes
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
- For taxes on purchases, use the condition types contained in the tax procedure.
- For taxes on sales, use the condition types contained in the pricing procedures.
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements - You have set up G/L accounts for each of the processing keys listed below.
- Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
- VS1 (basic excise duty)
- VS2 (additional excise duty)
- VS3 (special excise duty)
- VS5 (sales tax setoff)
- MWS (central sales tax)
- MW3 (local sales tax)
- ESA (service tax)
- ESE (service tax expense)
Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example:
- Excise TT DC ind Account name
- GRPO CR CENVAT clearing account
- GRPO CR RG 23 BED account
- GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
- Excise group
- Company code
- Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
- Defined the G/L accounts
- Defined the excise groups
- Maintained the transaction accounts
Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
- Material Master à Logistics General
1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Sub screens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade
Import, Excise related sub screen appears.
A small search on SDN SD forum will help you to answer your query.
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details -
Hi Sap Gurus,
its reg to cin condition types JEXT ,JCET weather i have to maintian condition records for the above conditions to get total Basic excise duties , cess in the pricing please give the sugestions
Thanks n Regards.....
Muralidear murali
check this config
Basically CIN is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
Make for Logistics General, byIndia the settings in Customizing Basic Excise Duties Usingchoosing Taxes on Goods Movements Account Settings Determination.Condition Technique and
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate access from the SAP EasyMaintenance screen, which you can Master DataAccess screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Data 1. Go to IMG Define Structure ofLogistics General forMaterial Master Configuring the Material master Screen Sequence.Screen each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
Transaction
Action
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challans
J1IFR
List subcontracting challans
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
rewards if it helps
siva -
Dear All,
I worked on taxinj but now i have to work on TAXINN.so anyboday tell / mail me the steps to configure TAXINN & also some give me idea about taxcode which i have to created in ECC 6.0.
My e-mail is [email protected]
Thanks & regards
PavanHI
TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN (TAXINJ) and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures (TAXINN) as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers)
TAXINJ & TAXINN are Tax Procedures in India. TAXINJ is old version & TAX INN is new version. Both has its own advantage & disadvantage.
Upto 4.6C & partially 4.7 version of SAP, TAXINJ was used. TAXINJ is formula based calculation, in which we maintain the tax rate in Tax Code itself. The implication is that if say we are having product range such that say Excise rate differes for separate chapter ID, VAT, CST & permutation & combination of these, we require that many Tax Codes. For example:
Tax Code: A1
Taxes: 16% Excise Duty + 2% Education Cess + 12% VAT
Tax Code: A2
Taxes: 16% Excise Duty + 2% Education Cess + 8% VAT
Tax Code: A3
Taxes: 12% Excise Duty + 2% Education Cess + 12% VAT
Tax Code: A3
Taxes: 12% Excise Duty + 2% Education Cess + 8% VAT
From 4.7 version onwards of SAP, TAXINN is being recommended & used. TAXINN is more user friendly & condition record based. In TAXINN, Tax Codes are statistical & of not much relevance, but are required to be maintained in condition record for taxes condition type. This makes Tax Codes simpler. The implication is that if say we are having product range such that say Excise rate differes for separate chapter ID, VAT, CST, we need not have the tax codes to that combination. For example:
Tax Code: A1
Can be used for any rate of excise duty, as tax code is only required to be maintained statistically in condition record.
Tax Code: A2
Can be used for any rate of VAT, as tax code is only required to be maintained statistically in condition record.
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
you enter the exchange rate type to store different exchange rates.
Example
you can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
when you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Maintenance screen, which you can MasterExcise Rate access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure of Data ScreenMaterial Master Configuring the Material master Screen Sequence. for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
CIN - INDIAN TRANSACTION CODES
Transaction Codes for India
Transaction
Action
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challans
J1IFR
List subcontracting challans
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
Sail -
hi.,
i need fully TAXINN document.(from top to bottom configuration document)
can u send to me ?
Very Urgent.Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
Enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, Multiple credit
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
Make the settings in Customizing Basic for Logistics General, by choosing Taxes on Goods Movements AccountIndia Settings Determination.Excise Duties Using Condition Technique and
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the access from the SAPExcise Rate Maintenance screen, which you can Master Data Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
Each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use : In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
1. Go to IMG Define Logistics General  Material Master  Configuring the Material master ScreenStructure of Data Screen for each Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears. -
CIN Configuration Doccument needed
Hello friends
Can anybody give me the Complete CIN configuration Doccuments (including Screen Shots) for FI step by step for TDS , Excise , CST , VAT ,Export / Import Procedures,etc.I dont know from where to start and how to start.
Pls help me out in my configuration.
Regards
Anup
Points are assuredHi Anup,
We cant send screen shots for now,but i am sending detailed list of configuration CIN.i think this is very usefull to you
Re: CIN Configuration
Posted: Sep 21, 2007 6:25 AM in response to: vudumula sriniv... E-mail this post
Hi
Refer below link and also search in sdn you have no ogf posts on this issue
http://help.sap.com/saphelp_470/helpdata/en/95/00bb3cfbe1624be10000000a114084/frameset.htm
SAP SD CIN Configuration
What is CIN?
CIN Means Country India Version
In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenarios. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
Country Version India comes with four pricing procedures as follows:
- JINFAC (Sales from manufacturing plants)
- JINEXP (Export sales)
- JINDEP (Sales from depots)
- JINSTK (Stock transfers
CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
In this IMG activity, you maintain the data relating to your excise registrations.
- Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
- For each excise registration in your business create a registration ID, and state:
- Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
- The maximum number of items to be printed on each excise invoice
- Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
ECC Number: Specifies the organization's ECC number.
Excise Registration Number: A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division: Specifies the excise division in whose area the excise registration is located.
Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming, AED usage Additional Excise duty Percentage.
These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements. This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description: Description of the excise registers set.
Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings.
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings.
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator - Excise year start month. The calendar month marking the beginning of the excise year. This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection Number of days from document date for excise invoice selection.
Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
Document type for TDS FI posting: Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts. The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type - Key representing a type of exchange rate in the system.
- You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
Plant Settings - In this activity, you maintain excise information relating to your plants.
For each plant:
- Specify whether it is a manufacturing site or a depot.
- Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- Number of goods receipt per excise invoice.
- Multiple GR for one excise invoice, Single credit
- Multiple GR for one excise invoice, multiple credit
Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
1. Create one excise group for each set of registers that you need to keep.
2. Assign the excise groups to plants.
3. Maintain whether this Excise group is for a depot or not.
If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to. At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- GR Per Excise Invoice
- Multiple GR for one excise invoice , Multiple credit
- Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background. - If you want to make use of this function, you must also define the
default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step. If this is not selected then you need to separately do RG23D selection
followed by PGI and then RG23D verification and posting. If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
- Blocked stock
- Stock transport order
- Consignment stock
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
- If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
- If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
- Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
- Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
- Specify the conditions in the sales order that are used for excise rates.
- Specify the countervailing duty condition type used for import purchase orders.
See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Customizing : Make the settings in Customizing Basic -> India -> for Logistics General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and -> Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for. On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
- Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
- Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
- Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
- Material master data
Each material is assigned a chapter ID.
- Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
status 7.
Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
determination.
- Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
- Assign Tax Code to Company Codes
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
- For taxes on purchases, use the condition types contained in the tax procedure.
- For taxes on sales, use the condition types contained in the pricing procedures.
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements - You have set up G/L accounts for each of the processing keys listed below.
- Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
- VS1 (basic excise duty)
- VS2 (additional excise duty)
- VS3 (special excise duty)
- VS5 (sales tax setoff)
- MWS (central sales tax)
- MW3 (local sales tax)
- ESA (service tax)
- ESE (service tax expense)
Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example:
- Excise TT DC ind Account name
- GRPO CR CENVAT clearing account
- GRPO CR RG 23 BED account
- GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
- Excise group
- Company code
- Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
- Defined the G/L accounts
- Defined the excise groups
- Maintained the transaction accounts
Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
- Material Master à Logistics General
1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Sub screens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade
Import, Excise related sub screen appears.
Hope this helps to you
Prem -
CIN diff betwn TAXINJ & TAXINN - Config settings SD
Hi,
1. can somebody help me out in giving a clarity on what condition types are maintained in TAXINJ and in TAXINN, similarly in JFACT & JINFACT.
2. Do we have any sales tax component like LST or CST in Exports in case yes what are they.
Points shall be rewarded for valuable answer
Regards
MaheshHi Mahesh,
Let me share my knowledge on this
CIN Means Country India Version
In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenarios. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
Country Version India comes with four pricing procedures as follows:
- JINFAC (Sales from manufacturing plants)
- JINEXP (Export sales)
- JINDEP (Sales from depots)
- JINSTK (Stock transfers
CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
In this IMG activity, you maintain the data relating to your excise registrations.
- Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
- For each excise registration in your business create a registration ID, and state:
- Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
- The maximum number of items to be printed on each excise invoice
- Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
ECC Number: Specifies the organization's ECC number.
Excise Registration Number: A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division: Specifies the excise division in whose area the excise registration is located.
Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming, AED usage Additional Excise duty Percentage.
These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements. This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description: Description of the excise registers set.
Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings.
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings.
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator - Excise year start month. The calendar month marking the beginning of the excise year. This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection Number of days from document date for excise invoice selection.
Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
Document type for TDS FI posting: Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts. The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type - Key representing a type of exchange rate in the system.
- You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
Plant Settings - In this activity, you maintain excise information relating to your plants.
For each plant:
- Specify whether it is a manufacturing site or a depot.
- Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- Number of goods receipt per excise invoice.
- Multiple GR for one excise invoice, Single credit
- Multiple GR for one excise invoice, multiple credit
Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
1. Create one excise group for each set of registers that you need to keep.
2. Assign the excise groups to plants.
3. Maintain whether this Excise group is for a depot or not.
If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to. At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- GR Per Excise Invoice
- Multiple GR for one excise invoice , Multiple credit
- Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background. - If you want to make use of this function, you must also define the
default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step. If this is not selected then you need to separately do RG23D selection
followed by PGI and then RG23D verification and posting. If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
- Blocked stock
- Stock transport order
- Consignment stock
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
- If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
- If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
- Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
- Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
- Specify the conditions in the sales order that are used for excise rates.
- Specify the countervailing duty condition type used for import purchase orders.
See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Customizing : Make the settings in Customizing Basic -> India -> for Logistics General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and -> Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for. On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
- Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
- Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
- Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
- Material master data
Each material is assigned a chapter ID.
- Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
status 7.
Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
determination.
- Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
- Assign Tax Code to Company Codes
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
- For taxes on purchases, use the condition types contained in the tax procedure.
- For taxes on sales, use the condition types contained in the pricing procedures.
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements - You have set up G/L accounts for each of the processing keys listed below.
- Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
- VS1 (basic excise duty)
- VS2 (additional excise duty)
- VS3 (special excise duty)
- VS5 (sales tax setoff)
- MWS (central sales tax)
- MW3 (local sales tax)
- ESA (service tax)
- ESE (service tax expense)
Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example:
- Excise TT DC ind Account name
- GRPO CR CENVAT clearing account
- GRPO CR RG 23 BED account
- GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
- Excise group
- Company code
- Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
- Defined the G/L accounts
- Defined the excise groups
- Maintained the transaction accounts
Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
- Material Master à Logistics General
1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Sub screens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade
Import, Excise related sub screen appears.
A small search on SDN SD forum will help you to answer your query.
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Award points if it adds information.
Thanks
Mohan -
Pls Help,
Any body create logic of TDS E Return .which is quaterly basis.
Pls do the needfull.
*Assign full mark.
regards,
mahiHi Dear.....
Basically Cin is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers)
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
you enter the exchange rate type to store different exchange rates.
Example
you can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
when you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
Make for Logistics General, by India the settings in Customizing Basic Excise Duties Usingchoosing Taxes on Goods Movements Account Settings Determination.Condition Technique and
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate access from the SAP EasyMaintenance screen, which you can Master Data Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
 1. Go to IMG Define Structure of Logistics General Material Master Configuring the Material master Screen Sequence.Data Screen for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
INDIAN TRANSACTION CODES CIN
Transaction Codes for India
Transaction
Action
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challans
J1IFR
List subcontracting challans
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
Please Reward If Really Helpful,
Thanks and Regards,
Sudarsan -
Hi sd gurus,
can u send me the screen shots for cin in sd sales point of view,like what are condition types in pricing procedure,and when we are doing sales,what about pricing procedure like we have to use two pricing procedures standard rvaa01 and what about taxinn ,or else we have to include all condition types in taxinn plz send me in detail step by step
thanks & regards,
srinivas.TDear Srinu,
What is CIN?
CIN Means Country India Version
In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenarios. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
Country Version India comes with four pricing procedures as follows:
- JINFAC (Sales from manufacturing plants)
- JINEXP (Export sales)
- JINDEP (Sales from depots)
- JINSTK (Stock transfers
CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
In this IMG activity, you maintain the data relating to your excise registrations.
- Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
- For each excise registration in your business create a registration ID, and state:
- Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
- The maximum number of items to be printed on each excise invoice
- Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
ECC Number: Specifies the organization's ECC number.
Excise Registration Number: A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division: Specifies the excise division in whose area the excise registration is located.
Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming, AED usage Additional Excise duty Percentage.
These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements. This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description: Description of the excise registers set.
Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings.
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings.
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator - Excise year start month. The calendar month marking the beginning of the excise year. This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection Number of days from document date for excise invoice selection.
Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
Document type for TDS FI posting: Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts. The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type - Key representing a type of exchange rate in the system.
- You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
Plant Settings - In this activity, you maintain excise information relating to your plants.
For each plant:
- Specify whether it is a manufacturing site or a depot.
- Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- Number of goods receipt per excise invoice.
- Multiple GR for one excise invoice, Single credit
- Multiple GR for one excise invoice, multiple credit
Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
1. Create one excise group for each set of registers that you need to keep.
2. Assign the excise groups to plants.
3. Maintain whether this Excise group is for a depot or not.
If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to. At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- GR Per Excise Invoice
- Multiple GR for one excise invoice , Multiple credit
- Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background. - If you want to make use of this function, you must also define the
default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step. If this is not selected then you need to separately do RG23D selection
followed by PGI and then RG23D verification and posting. If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
- Blocked stock
- Stock transport order
- Consignment stock
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
- If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
- If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
- Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
- Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
- Specify the conditions in the sales order that are used for excise rates.
- Specify the countervailing duty condition type used for import purchase orders.
See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Customizing : Make the settings in Customizing Basic -> India -> for Logistics General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and -> Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for. On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
- Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
- Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
- Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
- Material master data
Each material is assigned a chapter ID.
- Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
status 7.
Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
determination.
- Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
- Assign Tax Code to Company Codes
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
- For taxes on purchases, use the condition types contained in the tax procedure.
- For taxes on sales, use the condition types contained in the pricing procedures.
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements - You have set up G/L accounts for each of the processing keys listed below.
- Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
- VS1 (basic excise duty)
- VS2 (additional excise duty)
- VS3 (special excise duty)
- VS5 (sales tax setoff)
- MWS (central sales tax)
- MW3 (local sales tax)
- ESA (service tax)
- ESE (service tax expense)
Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example:
- Excise TT DC ind Account name
- GRPO CR CENVAT clearing account
- GRPO CR RG 23 BED account
- GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
- Excise group
- Company code
- Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
- Defined the G/L accounts
- Defined the excise groups
- Maintained the transaction accounts
Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
- Material Master à Logistics General
1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Sub screens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade
Import, Excise related sub screen appears.
A small search on SDN SD forum will help you to answer your query.
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
Maybe you are looking for
-
Error sending data to an SCMTM system from an R3 system
Dear Friends I am trying to send an Idoc from R3 system to an SCMTM system. I have imported the idoc, message mapping is preconfigured from SAP and requisite configurations in ID have been completed. I am getting this error in sxmb_moni when I use FT
-
Multiclip: nothing shows in angle viewer
Hmm, I've used multiclips before without problem, but now I'm stuck. I synced 2 video angles and a separate audio track. Then I added the multiclip to the timeline and opened angle viewer. The angle viewer is blank though--nothing showing. When I cl
-
IiPhoto 11 Red-eye Reduction too black
Hey there! I recently bought a new iMac and when I transferred my stuff over from my precious Mac, it told me I had to update to iPhoto 11. I did that, but I prefer my previous version of iPhoto (?08)... The red-eye reduction never seems to have the
-
Duplicate Contact list in 6303
hi there, i have update my nokia 6303 software. after the update when i recovered the data from nbu file. there were two such files, i was confused and i restored my contatcs from both the files one by one. Now my fone is showing each contact twice.
-
Fld selectn for mvmt type 501 / acct 520075 differs for Vendor goods moveme
Hi, When i do goodreceipt through 501 movment , I am getting the below error. "Fld selectn for mvmt type 501 / acct 520075 differs for Vendor goods movement (014)" Can you suggest , how to correct this. Thanks and regards Karthikeyan