Import Policy Failing
I apologize if this got posted twice but I cannot see my first posting.
My problem is as described in the TID below:
http://support.novell.com/cgi-bin/se...?/10089544.htm
My NMAS version meets the criteria as stated in the TID.
We are running NetWare 6 SP5 with ZFD4.1 and after configuring the
Universal Password Policy on the container that ZFD objects are
configured, we get the import error as indicated in the TID.
Any work arounds other than upgrading to ZFD7 and/or OES?
Any advice would be appreciated.
Chris
Chris,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
Import Policy fails after Universal Password enabled
I apologize if this got posted twice but I cannot see my first posting.
My problem is as described in the TID below:
http://support.novell.com/cgi-bin/se...?/10089544.htm
My NMAS version meets the criteria as stated in the TID.
We are running NetWare 6 SP5 with ZFD4.1 and after configuring the
Universal Password Policy on the container that ZFD objects are
configured, we get the import error as indicated in the TID.
Any work arounds other than upgrading to ZFD7 and/or OES?
Any advice would be appreciated.
ChrisChris,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Import Policy failing when Complex Password Policy enabled
Hello everyone. I have a very interesting issue.
We are running ZFD4 on a NetWare 6 SP5 server and after enabling a
Universal Password Complex Policy on the container that the ZFD objects
are in we are unable to import any workstations. We are seeing what id
detailed in the TID below:
http://support.novell.com/cgi-bin/se...?/10089544.htm
We cannot turn off the policy package as it is a requirement! Are there
any work arounds other than upgrading to ZFD7 or OES? The version of NMAS
is greater than 2.3.5.
Any advice would be appreciated.
ChrisOriginally Posted by Jared Jennings
Chris Murzda,
>We cannot turn off the policy package as it is a requirement! Are there
>any work arounds other than upgrading to ZFD7 or OES? The version of NMAS
>is greater than 2.3.5.
Are you getting error 319?
Are all servers at 2.3.5 or greater?
Jared Jennings - Data Technique, Inc.
Novell Support Forums Sysop
My Blog and Wiki with Tips, Tricks, and Tutorials
Main Page - ZENWorks Wiki
Hi,
I Have also this message -319 when importing ws in the tree. But only when the user (dynamic local user) have the name "INSTALL" when I rename the user to "INSTAL" or an other name, then it is working. What has the import to see with just a "username"?
Thanks
Herman -
Windows WiFi Import Policy not applying
Quoting from the following TechNet article:
https://technet.microsoft.com/en-us/library/dn818903.aspx?f=255&MSPPError=-2147217396
Additionally, for devices that run Windows 8.1 and later, you can import a Wi-Fi configuration profile that was previously exported
to a file.
It is not quite clear to me what "devices that run Windows 8.1" are supposed to include. I took it to include Windows 8.1 (Enterprise)
clients with the Intune Agent installed. However when I create an Windows WiFi Import policy and apply this to a group which contains a windows 8.1 notebook the policy is not applied.
It does not seem to be that the policy
failed, it does not seem to be applied at all. When checking the policy log it states that 4 policies have been found an applied, which are the default set: Hardware inventory, Software inventory, Intune Center Policy and Intune Agent policy.
So is this supposed to work?
On a related note: The article linked above states you can export the Wlan policy to include in a Windows WiFi import policy with the following command:
netsh wlan export profile MyConnection
Is this not supposed to have an added key=clear argument? I understood that the password encryption used in the export (without key=clear) is only decryptable by the machine on which the export was made. But I may misremember..Hello Andre,
>>
It is not quite clear to me what "devices that run Windows 8.1" are supposed to include. I took
it to include Windows 8.1 (Enterprise) clients with the Intune Agent installed. However when I create an Windows WiFi Import policy and apply this to a group which contains a windows 8.1 notebook the policy is not applied.
It does not seem to be that the policy failed, it does not seem to be applied at all. When checking the policy log it
states that 4 policies have been found an applied, which are the default set: Hardware inventory,
Software inventory, Intune Center Policy and Intune Agent policy.<<
This works when you manage devices with Win 8.1 via OMA-DM agent. This policy won't work for Win 8.1 devices with Intune
("fat") client.
Примечание:Сообщения предоставляются "КАК ЕСТЬ" без каких-либо гарантий,выраженных или подразумеваемых | Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied -
The processing of Group Policy failed. Windows attempted to read the file...
Hello all-
I am currently trying to configure group policy (specifically folder redirects) from a new Windows Server 2008 in my home... the server acts as both an AD DS and file server for 4 client computers, all running Windows Vista Ultimate.
Here are the steps I am currently taking:
I create a new Group Policy called All Users and Computers and apply it to the All Users and Computers OU, which contains exactly what it says (all users and computers in the domain).
I verify that a new folder was created in \\<FQDN>\sysvol\<FQDN>\Policies. The new folder created is named {6479C8E0-3134-4B4F-B047-7ADD51684684}
I change the GPO Enforced setting to Enforced.
I attempt to use the gpupdate command to see if the group policy can be updated successfully. In a command prompt, I type gpupdate <enter>. I receive the message 'Updating Policy...' then after about 15 seconds the message 'User Policy update has completed successfully.'
I keep the cmd window open. After about 10 seconds another message apperas which says "Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file \\<FQDN>\sysvol\<FQDN>\Policies\{6AC1786C-016F-11D2-945F-00C04Fb984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
To diagnose the failure, review the event log or invoke gpmc.msc to access information about Group Policy results."
I confirm that the error code is #3 using the Event Log, "The system cannot find the file specificed"
Of course the system cannot find the file specified because the folder does not exist in the sysvol folder. I am wondering why Windows is trying to read from this location when it does not exist, and is not the new group policy I created! I have no other group policies linked or enforced to any other OU/Domain/etc. Any help resolving this issue would be greatly appreciated.Hello all and thanks for the help. First a few things:
I understand that the DC should not be running RRAS, but this a simple server being used in aa home environment by 4 users and getting another server just for RRAS would be overkill.
Secondly, I currently have it so that while the router is handling DHCP, I have reserved a fixed IP for the server, so it always has 192.168.1.100. If I were to use the server as the DHCP, what would my hardware configuration have to look like? I currently have the router plugged into the ISP modem, and then server plugged into the router. All other clients connect to the router wirelessly.
Here's the dcdiag output. I tried dcdiag /fix but to no avail.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine KELLERDCFS, is a Directory Server.
Home Server = KELLERDCFS
* Connecting to directory service on server KELLERDCFS.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... KELLERDCFS passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Advertising
The DC KELLERDCFS is advertising itself as a DC and having a DS.
The DC KELLERDCFS is advertising as an LDAP server
The DC KELLERDCFS is advertising as having a writeable directory
The DC KELLERDCFS is advertising as a Key Distribution Center
The DC KELLERDCFS is advertising as a time server
The DS KELLERDCFS is advertising as a GC.
......................... KELLERDCFS passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the event log File Replication Service does not exist.
......................... KELLERDCFS passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... KELLERDCFS passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... KELLERDCFS passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... KELLERDCFS passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Domain Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role PDC Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Rid Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Infrastructure Update Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
......................... KELLERDCFS passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC KELLERDCFS on DC KELLERDCFS.
* SPN found :LDAP/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :LDAP/KELLERDCFS.keller-pa.net
* SPN found :LDAP/KELLERDCFS
* SPN found :LDAP/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :LDAP/42268b36-801f-4a6d-b162-34f3b01e04bb._msdcs.keller-pa.net
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/42268b36-801f-4a6d-b162-34f3b01e04bb/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net
* SPN found :HOST/KELLERDCFS
* SPN found :HOST/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :GC/KELLERDCFS.keller-pa.net/keller-pa.net
......................... KELLERDCFS passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC KELLERDCFS.
* Security Permissions Check for
DC=ForestDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=keller-pa,DC=net
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=keller-pa,DC=net
(Configuration,Version 3)
* Security Permissions Check for
DC=keller-pa,DC=net
(Domain,Version 3)
......................... KELLERDCFS passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\KELLERDCFS\netlogon
Verified share \\KELLERDCFS\sysvol
......................... KELLERDCFS passed test NetLogons
Starting test: ObjectsReplicated
KELLERDCFS is in domain DC=keller-pa,DC=net
Checking for CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net in domain DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net in domain CN=Configuration,DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
......................... KELLERDCFS passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
......................... KELLERDCFS passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 1600 to 1073741823
* KELLERDCFS.keller-pa.net is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1111
......................... KELLERDCFS passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... KELLERDCFS passed test Services
Starting test: SystemLog
* The System Event log test
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:53:59
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:59:02
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:04:04
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:09:06
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:14:08
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:19:10
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:24:12
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:29:15
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:34:17
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:39:19
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:49:23
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
......................... KELLERDCFS failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net and backlink
on
CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
The system object reference (serverReferenceBL)
CN=KELLERDCFS,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=keller-pa,DC=net
and backlink on
CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
......................... KELLERDCFS passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : keller-pa
Starting test: CheckSDRefDom
......................... keller-pa passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... keller-pa passed test CrossRefValidation
Running enterprise tests on : keller-pa.net
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
PDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Preferred Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
KDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
......................... keller-pa.net passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... keller-pa.net passed test Intersite
Here's the nslookup from Vista client:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Andrew>nslookup KELLERDCFS
Server: UnKnown
Address: 192.168.1.100
Name: KELLERDCFS.keller-pa.net
Addresses: 192.168.1.150
192.168.1.100
C:\Users\Andrew>
Thanks again! -
Processing of Group Policy failed - User Policy - Windows 7
OP:
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/191f1ee1-a551-446b-9808-ff66a952bb25
When running a gpupdate I get the following message:
Updating Policy...
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows could not authenticate to the Act
ive Directory service on a domain controller. (LDAP Bind function call failed).
Look in the details tab for error code and description.
Computer Policy update has completed successfully.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results.
This only happens on one computer under a certain account; other accounts work fine and the problem account works fine on other computers. Therefore the problem is located on the Windows 7 computer.
I have tracked it down to an LDAP error code 49.
I tried the MS sollution (http://technet.microsoft.com/en-us/library/cc727283(v=ws.10).aspx) but the credentials are sound.
I can also connect to the DC with LDP.exe fine.
Here are the diagnostic read outs (GPResult was too long to post):
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 2/29/2012 1:56:09 PM
Event ID: 1006
Task Category: None
Level: Error
Keywords:
User: Domain\UserAccount
Computer: Win7-ComputerA.FQDomain
Description:
The processing of Group Policy failed. Windows could not authenticate to the Active Directory service on a domain controller. (LDAP Bind function call failed). Look in the details tab for error code and description.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1006</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2012-02-29T19:56:09.732842600Z" />
<EventRecordID>32458</EventRecordID>
<Correlation ActivityID="{CECE6DDC-E7CC-4563-8109-E62382F645D4}" />
<Execution ProcessID="984" ThreadID="3688" />
<Channel>System</Channel>
<Computer>Win7-ComputerA.FQDomain</Computer>
<Security UserID="S-1-5-21-416373151-1271962822-2142307910-40105" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">5012</Data>
<Data Name="ProcessingMode">0</Data>
<Data Name="ProcessingTimeInMilliseconds">1326</Data>
<Data Name="ErrorCode">49</Data>
<Data Name="ErrorDescription">Invalid Credentials</Data>
<Data Name="DCName">
</Data>
</EventData>
</Event>
Windows IP Configuration
Host Name . . . . . . . . . . . . : WIN7-ComputerA
Primary Dns Suffix . . . . . . . : FQDomain
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : FQDomain
ParentDomain
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : FQDomain
Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connecti
on
Physical Address. . . . . . . . . : 00-21-CC-5F-CF-DF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 216.71.244.28(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, February 29, 2012 12:38:25 PM
Lease Expires . . . . . . . . . . : Thursday, March 01, 2012 12:38:24 PM
Default Gateway . . . . . . . . . : 216.71.244.1
DHCP Server . . . . . . . . . . . : 216.71.244.2
DNS Servers . . . . . . . . . . . : 216.71.244.2
216.71.240.120
216.71.240.132
Primary WINS Server . . . . . . . : 216.71.244.2
Secondary WINS Server . . . . . . : 216.71.240.130
216.71.240.122
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) WiFi Link 1000 BGN
Physical Address. . . . . . . . . : 8C-A9-82-B0-67-E8
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : YesHi,
It sound like port blocking issue, Seems your client system connecting 216.71.240.x DNS Servers as a logon server and which seems on different subnet
as per subnet mask, So there must be a router or firewall in between and so it might be Active directory ports are being blocked.
So first for testing purpose just remove other
216.71.240.x DNS
servers from TCP/IP configuration and clear dns cache
ipconfig/flushdns
and restart the system. check if it works.
or run this command on DC
dcdiag /test:dns
and share the error report.
Cheers!
Sanjay -
Processing of Group Policy Failed - Single DC error 1058
I have been getting the error every 5 mins for awhile:
The processing of Group Policy failed. Windows attempted to read the file \\xx.company\sysvol\xxx.company\Policies\{0000000-2323-2222-2222-333333}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this
event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
So - this is a single DC 2008R2. It started (I think) back when I joined another server on the domain and did a DCPromo to help build some redundancy. DFS was/is not enabled, do I need to set this up to resolve this?
User are able to login and policy are working, I only see this error on the DC, but other than the error everything seems to be working fine. I can access the share \\xx.company\sysvol\xxx.company\Policies\ and see it from all systems on the domain.
I looked for the Burflags to see if that would help but since there is no DFS there was nothing in the registry.
So at this point, I removed the secondary server via DCpromo, going back to just the 1 server DC but I still get the error. DNS works. When I do a DCDiag everything looks ok except the SysVol - I get about 10 of these
Starting test: SystemLog
An error event occurred. EventID: 0x00000422
Time Generated: 03/17/2015 14:49:41
Event String:
The processing of Group Policy failed... blah blah - same as above.
I looked at this link because of the combination of the 2 errors - Error 1058 and 00422 but its suggesting Authoritative restore, but I don't have the replication.
Now I am wondering if there is a left over connection somewhere in the system that doesn't know that there isn't another DC on the network?
So - any suggestions? Thanks in advance.Hi,
>>Now I am wondering if there is a left over connection somewhere in the system that doesn't know that there isn't another DC on the network?
Did we clean up the metadata of the removed domain controller? If not, we can follow the article below to do this.
Clean Up Server Metadata
https://technet.microsoft.com/en-us/library/cc816907(v=ws.10).aspx
Besides, on the existing domain controller, check Applications and Services Logs\FRS or DFSR logs in Event Viewer. If the issue persists, we can follow the method below to do an authoritative restore for Sysvol.
If we use FRS to replicate Sysvol, we can try to follow the article below to an authoritative restore for Sysvol.
Using the BurFlags registry key to reinitialize File Replication Service replica sets
https://support.microsoft.com/en-us/kb/290762
If we use DFSR to replicate Sysvol, we can try to follow the article below to do an authoritative restore for Sysvol.
How to force an authoritative and non-authoritative synchronization for DFSR-replicated SYSVOL (like "D4/D2" for FRS)
https://support.microsoft.com/en-us/kb/2218556
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
The processing of Group Policy failed because of lack of network connectivity to a domain controller
We are setting up a new AD environment with one AD/DC running DNS services, and a secondary DNS server configured with secondary zone. The problem is that none of the machines in the the domain are getting GPO.
When I run a gpupdate /force from a machine, I get the following output:
"Updating Policy...
User Policy update has completed successfully.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed because of lack of network connectivity to
a domain controller. This may be a transient condition. A success message would
be generated once the machine gets connected to the domain controller and Group
Policy has succesfully processed. If you do not see a success message for sever
al hours, then contact your administrator.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results."
While the system event log outputs the following:
"The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy
has succesfully processed. If you do not see a success message for several hours, then contact your administrator."
All the machines that were joined to the domain are able to resolve in forward and reverse lookups, ping the DC and ping each other so I dont understand how the error can be resolved.
Here are few things I have tried:
1. I came across this KB which checked ok for me: http://support.microsoft.com/kb/241515
2. Made a copy of the default GPO, applied to a OU with one machine, and made sure to remove any GPO links from above
3. Enabled the following two local Group policies on a test member:
GP slow link detection
Startup policy processing wait time
4. Modified firewall to allow everything on both member and DC
5. Verified DSN logs, SRV records, access to sysvol ( added authenticated users to sysvol)
I have yet to figure out the reason for this issue. Has anyone seen anything like this before?1. I checked the NIC, it only has one IP. and I followed your article. I set the primary DNS to its own IP and the secondary DNS to the loopback ip
2. This is a new DC and DNS server. I dont have old records yet. I also check the DNS event logs. No errors
3. I made sure the member server is pointing only to the only DC/DNS server
4. Here is the output from the dcdiag.... everything passed except, the Netlogons part. I'm not sure what means or how to fix it yet:
Starting test: NetLogons
* Warning BUILTIN\Administrators did not have the "Access this
computer
"* from network" right.
[hostname] An net use or LsaPolicy operation failed with error
1, Incorrect function..
......................... hostname failed test NetLogons
Complete output:
> hostname
Server: hostname.domain.local
Address: X.X.X.95
> ^C
C:\Windows\system32>
C:\Windows\system32>nslookup
> set type=all
>
>
>
> _ldap._tcp.dc._msdcs.domainname
_ldap._tcp.dc._msdcs.domain.local SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = hostname.domain.local
hostname.domain.local internet address = X.X.X.95
> ^C
C:\Windows\system32>cd ..
C:\Windows>cd SYSVOL
C:\Windows\SYSVOL>cd sysvol
C:\Windows\SYSVOL\sysvol>dir
Volume in drive C has no label.
Volume Serial Number is F624-CDB2
Directory of C:\Windows\SYSVOL\sysvol
10/29/2014 08:25 PM <DIR> .
10/29/2014 08:25 PM <DIR> ..
10/29/2014 08:25 PM <JUNCTION> domain.local [C:\Windows\SYSVOL\domain]
0 File(s) 0 bytes
3 Dir(s) 63,971,037,184 bytes free
C:\Windows\SYSVOL\sysvol>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = hostname
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\hostname
Starting test: Connectivity
......................... hostname passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\hostname
Starting test: Advertising
......................... hostname passed test Advertising
Starting test: FrsEvent
......................... hostname passed test FrsEvent
Starting test: DFSREvent
......................... hostname passed test DFSREvent
Starting test: SysVolCheck
......................... hostname passed test SysVolCheck
Starting test: KccEvent
......................... hostname passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... hostname passed test
KnowsOfRoleHolders
Starting test: MachineAccount
......................... hostname passed test MachineAccount
Starting test: NCSecDesc
......................... hostname passed test NCSecDesc
Starting test: NetLogons
* Warning BUILTIN\Administrators did not have the "Access this
computer
"* from network" right.
[hostname] An net use or LsaPolicy operation failed with error
1, Incorrect function..
......................... hostname failed test NetLogons
Starting test: ObjectsReplicated
......................... hostname passed test
ObjectsReplicated
Starting test: Replications
......................... hostname passed test Replications
Starting test: RidManager
......................... hostname passed test RidManager
Starting test: Services
......................... hostname passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/04/2015 18:23:06
Event String:
Name resolution for the name ctldl.windowsupdate.com timed out after
none of the configured DNS servers responded.
......................... hostname passed test SystemLog
Starting test: VerifyReferences
......................... hostname passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : emcdsm
Starting test: CheckSDRefDom
......................... emcdsm passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... emcdsm passed test CrossRefValidation
Running enterprise tests on : domain.local
Starting test: LocatorCheck
......................... domain.local passed test LocatorCheck
Starting test: Intersite
......................... domain.local passed test Intersite
C:\Windows\SYSVOL\sysvol> -
Upgrading Stellent 7.5 to OCS 10gR3 Import Process failing HELP NEEDED
Hi,
I am upgrading Stellent 7.5 to Oracle COntent Server 10gR3. Here is what I have done.
1. Migrated all the configuration from Stellent to 10gR3
2. Migrated the Folders from Stellent to 10gR3
3. Migrated the content by creating an Archive and then importing the Archive in 10gR3.
I am seeing lot of errors in the log file. Following are the errors I see in the log file.
1.
Could not send mail message from (null) with subject line: Content Release Notification. Could not get I/O for connection to: hpmail.rtp.ppdi.com java.net.ConnectException: Connection timed out
2.
Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_000025'. Virtual folder does not exist.
3.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004118' was not successfully checked in. The primary file does not exist.
4.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004213' was not successfully checked in. IOException (System Error: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227 (No such file or directory)) java.io.FileNotFoundException: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227
5.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_031414' with revision label '2' was not successfully checked in. The release date (11/4/08 9:12 AM) of the new revision is not later than the release date (11/4/08 9:12 AM) of the latest revision in the system.
6.
Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_033551'. Item with name '07-0040_IC_Olive-View_UCLA_ERI_Cellulitis_2008-08-26.pdf' already exists in folder '/Contribution Folders/2007/07-0040/07-0040Site_Specific_Documents/07-0040Olive_View_UCLA_Medical_Center/07-0040Archive/07-0040Essential_Documents_ARC/07-0040Informed_Consent_ARC/'.
7.
Import error for archive 'ProductionContent' in collection 'prod_idc': Aborting. Too many errors.
QUESTIONS:
Is there a way to keep the import processing running even if the errors are coming. As it looks like when there are too many errors the import process stops in the middle.
How do I find out the total number of folders and the documents. As I want to run the same query on Stellent 7.5 and find out total number of folders and the documents and then run the same query on 10gR3 and compare the results. Just want to fnd out how much content is imported.
How do I run the import process over again as half of the content is imported and my import process failed in the middle when running the process over again what settings do I need to provide to make sure no duplicates get created etc.
Any help is really appreciated.
ThanksHi
There are a couple of ways to get around the issues that you are facing such that import process is not interrupted because of these. They are as follows :
1. Use ArchiveReplicationException component . This will keep the import process running and make a log of the failed process which can be used for assessing / gauging the success of the import and what all needs to be redone.
I would suggest this as the option for your case.
2. Put the config variable for arciver exception to 9999 so that the archive process stops only after hitting the limit of 9999 errors.
I would suggest to go for step 1 as that would be a much more foolproof and methodical way of knowing what all items have failed during import.
Thanks
Srinath -
STMS Import queue Fails - FTP_FAILED
Hi All
Stms import queue fails with the following error message
System BWP Command TMS_MGR_TRANSMIT_TR_QUEUE
Client 001 Service Transport Service
User SAPBASIS Start Online
Date 14.05.2009 Function TMS_TP_ADD2BUFFER
Time 11:48:34 Message FTP_FAILED
Source file could not be opened
long text
========
An error occurred when opening the source file for reading.
File name: R901010.BWE
Directory: $TR_DATA
Error code: 16
Definition of the error codes:
03 RFC system failure
04 RFC communication failure
11 invalid EPS subdirectory
12 sapgparam failed
13 build directory failed
14 no authorization
15 build path failed
16 open failed
17 read directory failed
18 read attributes failed
System Response
Transmission was terminated.
Procedure
Eliminate the cause of the error and restart the transmission
==========
suggesstions please
Edited by: Harendranath Medarametla on May 14, 2009 11:59 AMHi Saurabh,
I am able to FTP files manually between servers.
START TRANSMIT BUFFER ENTR BWP g 20090511092623 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090511092638 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512152143 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152159 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512152251 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152307 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512152321 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152338 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512171040 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171056 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512171405 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171421 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512171429 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171446 MEDARAMETLAH smuc021
START CMDIMPORT BWP L 20090512172121 MEDARAMETLAH smuc021 20090512172120681
STOP CMDIMPORT BWP L 20090512172123 MEDARAMETLAH smuc021 20090512172120681
START MAIN IMPORT BWP I 20090512172124 MEDARAMETLAH smuc021 20090512172123291
STOP MAIN IMPORT BWP I 20090512172139 MEDARAMETLAH smuc021 20090512172123291
START CMDIMPORT BWP L 20090512172139 MEDARAMETLAH smuc021 20090512172139056
STOP CMDIMPORT BWP L 20090512172343 MEDARAMETLAH smuc021 20090512172139056
START CREATE VERSIONS BEFO BWP w 20090512173112 MEDARAMETLAH smuc021
START tp_getprots BWP W 20090512173112 MEDARAMETLAH smuc021
STOP tp_getprots BWP W 20090512173322 MEDARAMETLAH smuc021
STOP CREATE VERSIONS BEFO BWP w 20090512173322 MEDARAMETLAH smuc021
START DD IMPORT BWP H 20090512173623 MEDARAMETLAH smuc021 20090512173622926
STOP DD IMPORT BWP H 20090512173855 MEDARAMETLAH smuc021 20090512173622926
START DD ACTIVATION BWP A 20090512173905 MEDARAMETLAH smuc021
START tp_getprots BWP J 20090512173905 MEDARAMETLAH smuc021
STOP tp_getprots BWP J 20090512174100 MEDARAMETLAH smuc021
STOP DD ACTIVATION BWP A 20090512174100 MEDARAMETLAH smuc021
START imp all BWP 20090512174101 MEDARAMETLAH smuc021 20090512174100971
INFO: event SAP_IMPORT_START triggered successfully
START CMDIMPORT BWP L 20090512174102 MEDARAMETLAH smuc021 20090512174100971
STOP CMDIMPORT BWP L 20090512174102 MEDARAMETLAH smuc021 20090512174100971
START DD IMPORT BWP H 20090512174103 MEDARAMETLAH smuc021 20090512174100971
STOP DD IMPORT BWP H 20090512174103 MEDARAMETLAH smuc021 20090512174100971
START DISTRIBUTION OF DD-O BWP S 20090512174103 MEDARAMETLAH smuc021 20090512174100971
START tp_getprots BWP S 20090512174103 MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots BWP S 20090512174118 MEDARAMETLAH smuc021 20090512174100971
STOP DISTRIBUTION OF DD-O BWP S 20090512174118 MEDARAMETLAH smuc021 20090512174100971
INFO TBATG CONVERSION OF BWP N not needed MEDARAMETLAH smuc021 20090512174100971
START MOVE NAMETABS BWP 6 20090512174118 MEDARAMETLAH smuc021 20090512174100971
START tp_getprots BWP P 20090512174118 MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots BWP P 20090512174223 MEDARAMETLAH smuc021 20090512174100971
STOP MOVE NAMETABS BWP 6 20090512174223 MEDARAMETLAH smuc021 20090512174100971
START MAIN IMPORT BWP I 20090512174224 MEDARAMETLAH smuc021 20090512174100971
STOP MAIN IMPORT BWP I 20090512204043 MEDARAMETLAH smuc021 20090512174100971
START TBATG CREATION OF EN BWP n 20090512204043 MEDARAMETLAH smuc021 20090512174100971
START tp_getprots BWP Y 20090512204043 MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots BWP Y 20090512204053 MEDARAMETLAH smuc021 20090512174100971
STOP TBATG CREATION OF EN BWP n 20090512204053 MEDARAMETLAH smuc021 20090512174100971
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all BWP 0004 20090512204055 MEDARAMETLAH smuc021 20090512174100971
START EXECUTION OF REPORTS BWP R 20090512204200 MEDARAMETLAH smuc021
START tp_getprots BWP R 20090512204200 MEDARAMETLAH smuc021
STOP tp_getprots BWP R 20090512205837 MEDARAMETLAH smuc021
STOP EXECUTION OF REPORTS BWP R 20090512205837 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513095342 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095359 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513095701 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095718 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513095723 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095740 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513100151 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513100208 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513100213 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513100231 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513100238 TMSADM STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513103804 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513103833 MEDARAMETLAH START TRANSMIT BUFFER ENTR BWP g 20090513115655 MEYERA smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513115713 MEYERA smuc021
INFO: Buffer saved as
smuc021\sapmnt\trans\buffer\BWPSAV.
======================
also please see the error when i try to connect using TP command in os
This is tp version 372.04.40 (release 700, unicode enabled)
Connection to Database of BWP was successful.
This is R3trans.exe version 6.14 (release 700 - 16.10.08 - 16:26:00).
unicode enabled version
2EETW152 Cannot open file "
SMUC013\sapmnt\trans\tmp\C090514.BWP".
R3trans.exe finished (0012).
SMUC013\sapmnt\trans\log\C090514.BWP for transport: ALL: Permission denied
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (1)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (1), I'm waiting 1
sec (20090514174859). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (2)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (2), I'm waiting 3
sec (20090514174900). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (3)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (3), I'm waiting 1
sec (20090514174903). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (4)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (4), I'm waiting 5
sec (20090514174904). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (5)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (5), I'm waiting 3
sec (20090514174909). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (6)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (6), I'm waiting 3
sec (20090514174912). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (7)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (7), I'm waiting 2
sec (20090514174915). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (8)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (8), I'm waiting 5
sec (20090514174917). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (9)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (9), I'm waiting 5
sec (20090514174922). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (10)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (10), I'm waiting
4 sec (20090514174927). My name: pid 4340 on smuc021 (bwpadm)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC: Permission denied
PANIC --> exiting
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see dev_tp or SLOG0920.BWP for more details
I have 4 system lanscape but other systems dont have this problem, even i have not maintained any permissions.
regards
hari -
Import Wizard fails to export - object could not be written in the ids-file
Hello,
the complete export of the BO environment into a biar-file with the import wizard fails. In the wizard's dialog every option is choosen as "all". When the export is started it stops already in the folder objects. The log file says the object allocation could not be written in the ids-file. So I presume a problem with references.
In order to figure out which object is responsible for the error I varied the export and finally identified the "repository objects" as the the responsible type of objects. When I now run the export and only use the needed repository objects it works fine.
But I don't know, if export is complete (I presume it).
Has anyone a idea what the reason can be for this problem? Can it be fixed in the database? This kind of export did work fine the week before.
thanks, matthiasCould you quote the entire error message, word-for-word, verbatim? What Import settings are you using ... Copy, Move, Add?
Most likely you have a permissions issue, but it will be much more clear to me if I can see the entire message. -
Importing changlist failed: unknown error has occured
Hello,
while importing a changelist from mas-test to mas-prod-system I get
error in transport service:
Importing changelist failed: unknwon error has occured, trying to reconnect.
I reinstalled the service, connections are ok, but this didn't solve the probelm.
What I have seen is that in the tile set 'imported changelist to be released'
my released changelist is about 25 times there - I think that is not normal.
Does anybody know where the problem could be ?
Thanks GerdHi Gerd,
I don't know how to solve that particular issue but as a workaround I suggest to manually export and import the CL.
In 4.0 use these commands:
1. Export
Transport.exe /DBDars_db /DBUarsadmin /DBP /EXPexport /DIR"C:\temp" /CIDXX43748642B841409C5F03XXXXXXXXXX
where:
/DBD = Dsn of DB
/DBU = Administrator user(ARSAdmin)
/DBP = Password
/EXP = Operation(either export or import)
/DIR = Path to save the files to(during export) as well as path from where to pick up the CLs from(during import)
/CID = ChangelistID to be exported/imported
2. Import
Transport.exe /DBDars_db /DBUarsadmin /DBP /EXPimport /DIR"C:\temp" /CIDXX43748642B841409C5F03CXXXXXXXXX
If you are on .net use the Import / Export Manager. If you need that tool please contact me directly.
Regards
Whity -
Import job failes with ORA-01403: no data found ORA-06512: at "SYSMAN.MGMT
Hello everyone,
I need a help on importing data from a schema in server 1 to the same schema in server 2 via network link. I receive following error when I try to submit a job on Enterprise Manager:
Import Submit Failed
ORA-01403: no data found ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 5806 ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 7812 ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8608 ORA-01403: no data found ORA-06512: at "SYSMAN.MGMT_JOBS", line 273 ORA-06512: at "SYSMAN.MGMT_JOBS", line 86 ORA-06512: at line 1
Sql of the job:
declare
h1 NUMBER;
begin
h1 := dbms_datapump.open (operation => 'IMPORT', job_mode => 'FULL', remote_link => 'B_PROD_LINK', job_name => 'BIMPORTFRMPRDTORPT4', version => 'COMPATIBLE');
dbms_datapump.set_parallel(handle => h1, degree => 1);
dbms_datapump.add_file(handle => h1, filename => 'IMPORT.LOG', directory => 'DATA_PUMP_DIR', filetype => 3);
dbms_datapump.set_parameter(handle => h1, name => 'KEEP_MASTER', value => 0);
dbms_datapump.set_parameter(handle => h1, name => 'INCLUDE_METADATA', value => 1);
dbms_datapump.set_parameter(handle => h1, name => 'ESTIMATE', value => 'BLOCKS');
dbms_datapump.set_parameter(handle => h1, name => 'REUSE_DATAFILES', value => 0);
dbms_datapump.set_parameter(handle => h1, name => 'TABLE_EXISTS_ACTION', value => 'TRUNCATE');
dbms_datapump.set_parameter(handle => h1, name => 'SKIP_UNUSABLE_INDEXES', value => 0);
dbms_datapump.start_job(handle => h1, skip_current => 0, abort_step => 0);
dbms_datapump.detach(handle => h1);
end;
It says network link is active when I test the network link to make sure its connectivity. I create the network link as a system account. I'm trying to do an import from an Oracle database 10.2.0.2 to 11.2.0.1. My 10g database is on ms windows 2003x64 while my 11g database is on OEL 5.4x64.
What should I do for now?
Thank you.
Edited by: user12144220 on Nov 4, 2012 5:02 AMIt will be wise to run the Oracle supply streams health check script to check your existing streams environment.
From the result, you can also open a tar with Oracle to see if they can help you with the setup.
In addition to the ORA-01403 error, you can also run some of the Oracle Streams packages (Managing Apply Errors) to see the full detail of what is missing that caused the Ora-01403 error.
I will also try to implement a smoke test using the simple heartbeat table suggested by Oracle Streams, if that is working, then you can begin your full scale setup in your environment knowing that the base Streams Structure is setup correctly.
HTH -
Does a table/view still return records if the underlying VPD policy fails ?
Hi All,
I have one following question -
Does a table or view still return records if the underlying VPD policy fails?
I am adding one more thing here. Let us say security is being implemented using the application context and VPD.
What would happen when application context is not set ? Would the application apply any default privilege as VPD?
Thanks,
AshiAshiKD wrote:
Hi All,
I have one following question -
Does a table or view still return records if the underlying VPD policy fails?No, you get a standard error message if the VPD function is wrong and if you won't pass the conditions of the VPD, you get nothing. That's what in general happens and should happen as well.
>
I am adding one more thing here. Let us say security is being implemented using the application context and VPD.
What would happen when application context is not set ? Would the application apply any default privilege as VPD?This would be a wrong approach then. If you are truly setting a VPD, you have to make sure that the context is set and the condition variable are passed through it. This is normally done through a logon trigger so again, generically , its not possible that it would not be set. I didn't get at all what ever you said in the last line? What is "default priv for VPD" ?
HTH
Aman.... -
will not start up.
tried Command-v
message reads
(error) Import:Importer start failed for 89 (kr:268435459)invalid destination port)First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.
Maybe you are looking for
-
I get a pop-up window on top of the iTunes sign-in box saying "unable to purchase"
Sometimes this box pops up when I choose an app to purchase. I tap the install box and the sign-in to iTunes box opens. At the same time another box pops up on top of the sign-in box that says "UNABLE TO PURCHASE Angry Birds Seasons cannot be purchas
-
ReadCursorResponse Items. How Do You Iterate Cursor Items?
I am working on some C# code that returns a cursor response. The cursor does have items in it. I can access them individually. How can I determine a "count" of items, or how do I control an interation loop of the items returned by the cursor? In othe
-
Transparent images are not viewing properly. please help
after the latest update version 25, there is always a white background even the firefox addon transparent-standalone-imag doesn't work
-
I have somehow added a link to my pictures, so each one has a " ? " in the top left corner. How do I
I have somehow added a link to my pictures, so each one has a " ? " in the top left corner. How do I remove this link ?
-
Rendering service by providing material to vendor
Hi, I need to render service with reference of project for Painting of building , In this case I am providing all the material required for painting and POP to vendor, please suggest me how to create a service PO by specifying the details of material