Import Powerpoint Audio

Hello fellow Captivate lovers!
I created a powerpoint presention and added audio to it
(slide show > record narration). Next, I imported the
presentation into Captivate. Everything is great except for one
problem. I am unable to import the audio with the slides.
I realize that I can add audio to a captivate project later,
or record the powerpoint presentaion with Captivate. However,
working at a college, my goal is to offer instructors a service
where they can bring me their already created powerpoint
presentations inclucluding audio and convert them to flash using
Captivate. Is this possible?? Is seems strange that I can import an
entire powerpoint presentation except the audio.
Many Thanks

Hi there,
Thank you for reaching Adobe Community.
Which version of Captivate you are using?
Is the powerpoint presentation a .ppt or .pptx?
Thanks!

Similar Messages

Powerpoint audio

I have spent a hudge amount of time creating powerpoint
slides with voice narration attached directy to shapes(not the
slides themselves) with and without animation.
After importing into captivate, non of the audio narration
plays even the shapes are not visible until using preview.
Whats the deal with that, captivate can't import any audio
contained in powerpoint or show animation in the design view?

Hello again
Okay. Where there is a will there is usually a way, no? If
you were to visit a Radio Shack store and obtain a small patch
cable, you could insert the cable into both the Speaker out and the
Microphone In jacks of the PC. (I've used this approach to capture
a song I purchased from iTunes, so I know it works.
The cable should cost less than $5.
The links below may help.
Link
one
Link
two
Cheers... Rick

HT1567 I can't import an audio cd to itunes to add to my library. I ran a diagnostics test and it had a red light next to: Unable to access audio cd. I am wondering if anyone else has had this problem and if there is an easy solution?

I can't import an audio cd to itunes to add to my library. I ran a diagnostics test and it had a red light next to: Unable to access audio cd. I am wondering if anyone else has had this problem and if there is an easy solution?

Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike

Premiere CC won't import AAC audio

I'm trying to loop two videos together in Premiere Pro CC 2014.1. One of the videos won't import the audio, just the video track. The audio is in AAC format, the video is a MPEG-4 movie with H.264 format. Every other video I've tried imports as usual, but for some reason the audio drops off on this one. The video plays just fine in Quicktime with the audio track. When I import it, the audio track drops off and only the video track shows up.
I didn't create the video, so I don't have access to the original working files. Anyone know any workarounds or fixes for this?
Thanks!

Hi Neila,
Neila@IPSUMM wrote:
Thanks for responding, but I work for a very small company and since I'm the only one who needs CC, I have the personal version installed.
Also this appears to be a blanket issue with all audio and video file formats, thus not likely a codec issue since the files I've tried so far should be covered by premiere's compatibility, the even play in windows media player with no issue.
Video itself plays fine, but any audio attached to a video, or just plain audio files will not import no matter what I try.
Sorry my info didn't help.
Two things to try.
Create a brand new project and test if you can import the problematic files.
If that does not work, change the name of the folder that contains your media files. Then try to import.
Let us know what happens.
Thanks,
Kevin

.AVI video not importing correctly. Imports as audio only.

System: window vista 64 bit
Project type: whatever the standard new project is at the startup screen
Problem: I am importing .avi video files and they are importing as audio only. it will not allow me to drag them into the video slot on the timeframe, and it displays only the speaker symbol in the media management area. Here's the funny bit. I used these files previously in another session June-July 2009, and they worked fine then. I am lost and need assistance!(PLEASE!!)
Stumped Like a Chump

If you look at the CODEC, it is Xvid, the opensource version of DivX, just as I suspected. These will almost never work in PrE. The best workflow is to go to before the Xvid compression (these are heavily compressed, loosing a ton of data and quality), or to convert them to DV-AVI Type II files with 48KHz 16-bit PCM/WAV Audio. I use DigitalMedia Converter, but it is shareware. Many users sing the praises of the free Prism to do the conversions. I have never used it, but many here have, and give it very high marks.
Note: no conversion program can ever reclaim that lost data and quality. It is lost and gone forever. That is why my first option was to go back to before that compression was applied. However, conversion will yield files that can be edited with both Video and Audio.
Good luck,
Hunt
[Edit] not sure why/how they were working before. Usually, with either the Xvid, or DivX CODEC's, one will get a Cannot Import error, or will get either Audio, or Video only. I have never been able to edit any Xvid, or DivX files, in either PrE, or PrPro - never even once. I just convert, if the client cannot get original source files, and I even have a quality loss diagram to show them how the footage will look - not very good, IMHO. I make them sign-off on that quality loss, before I start.
Message was edited by: Bill Hunt - Added [Edit]

No import from audio cd

itunes - latest version 7.1.1 - freezes on import of audio files from cd, does not matter whether original new cd's or self burned. have to exit with force quit,
when I then try to copy an audio file from the cd via drag-and-drop to the computer, I receive an error message, error -36, telling me that there is aproblem in reading the file.
deleted all itunes preferences in the library folder, did not change anything
then repaired permissions on the volume, great, could import one cd, on the second itunes freezes again.
needed to repair permissions again, great, can import another cd
so now I have to repair permissions every time I want to import audio files
I have no problems importing mp3 files
anybody here, who knows how to fix this annoying problem?
G4 titanium power book Mac OS X (10.4.9)

does itunes make use of other programs in reading
cd's, would it make sense to delete preferences of
such progs?
It doesn't look like that's the case. It appears to all be handled by threads inside iTunes. So I don't think you'd be able to find the preferences to delete.
one more thing, the problem of not being able to copy
audiofiles from cd to hd only occurs when I have
tried to import the cd into itunes, fresh inserted cd
will allow to copy audio files, but once I have tried
itunes, it is no longer possible, so obviously itunes
screws up something.
My guess, and it's just a guess, is that there's a bug in the CD/DVD drive on those machines, or a bug in the driver for that hardware and iTunes causes the problem to show up. If you know someone with an external USB or Firewire drive, you might try borrowing it and see if it works.
You could also try this software:
http://www.sbooth.org/Max/
and see if it behaves any differently. Maybe it accesses the audio in a different way.
I have no idea why it was fine with the old HD, but it doesn't work with the new one. Perhaps it's a question of how some part of the OS gets loaded into RAM because the 120GB drive needs more RAM or something. But that's just another wild guess.
charlie

How do I import stereo audio as pan centered, "Dual Mono?"

Greetings,
For most of my video recording, I’m running two wireless mics and am recording in stereo.
90% of the time, I’m working with one track or the other and, because I’m cutting for broadcast news, the pan for the audio needs to be centered.
Is there a way to import the audio I recorded in stereo as Dual Mono with the pan for each channel center?
It’s a pain to have to go through each clip and make it Dual Mono and then chose Pan Mod Default to center it.
I bring in my video as indiviaual clips so I can’t select a single clip in the Event Panel and make my changes for the whole project.
Regards,
Steve

Select the clips in the event, and set the audio as [Dual] Mono!
There is, as I remember, no option for this during import - but you can select multiple clips and set it on all at once.

I have iMovie 2011 and I imported PowerPoint slides with a soundtrack. Now I want to get rid of a small clip but it's not letting me do that.

I have iMovie 2011 and I imported PowerPoint slides with a soundtrack. Now I want to delete a small highlighted clip and it won't let me no matter what I do! Rosemary

First off....do NOT install MacKeeper! It creates more problems than it prevents, and is a royal pain to get rid of once you realize this.
What I would do, since it sounds like you don't want to reorganize your email filing by the use of Smart Mailboxes, is to simply use the search box at the top of the Mail window to find only the emails you want to delete....then select them all and delete them. For example, if you wanted to delete all of the emails from [email protected], you would type that into your search box, which will filter your inbox to only show you emails from [email protected] Then Select All, and delete them. You haven't deleted any others....only those from that person.
Then clear the search box to see the rest of your emails again.
Repeat this process to delete emails from other senders you no longer need.
(Once you've selected them all, by the way, you can control-click one if you need to save it).

Cannot Import PowerPoint into Responsive Design Template

Hi,
I have a PowerPoint which needs to be converted to a Responsive Design Project. I notice that when I create a new Responsive design project, the Import PowerPoint is greyed out.
Is this normal?
Also if I create a basic Captivate Project, is it possible to convert it to a responsive project if a client decides they require this, without a complete rebuild?
thanks

It is not possible to import Powerpoint slides in a responsive project at all, seems logical to me but will not bother you with an explanation. The technique, programming is so different. The provided themes are responsive, PPT is not.
Same negative answer for your second question, for the same reason. You can use the assets from PPT, but will have to create your own responsive project.
Lilybiri

Why does Adobe Premiere CS6 slow playback after importing some audio?

Adobe Premiere CS6.0 v6.0.2
Mac Pro:
1, 4 core - 3.2ghz CPU
16gb ram (4 sticks of 4gb @ 1066 MHz)
1 Tb dive with OS/Apps on
2Tb 7200 RPM media drive
ATI Radeon HD 5770
Sequence:
30Fps
1920x1080
Media:
mostly .MFX files from a Canon XF100 however these clips commonly play nice with Premiere.
Issue:
After importing some audio clips (.wav/.mp3, possibly other extensions) to the timeline on occasion the video playback will become choppy and the audio will slow down 3% creating any voices in the video to become deeper and slows down. Choppy video playback as well. The problem is very annoying but it can be temporarily fixed with a computer restart but it will come back.
Things to note:
Creating a rendered ID (Exporting the movie out to a .mov) the slowed choppy video does not appear in the final movie.
Temp. Solution:
The only way I can fix this problem is by restarting the computer. Simply restarting Adobe Premiere and closing any non-essential applications does not fix the problem.
Any ideas on how to fix this are much apperciated.

Try converting your MP3 to AIFF ,QT or something else Macs like. See if that helps.

I can't Import video&Audio file in photoshop cs6

I can't Import video&Audio file in photoshop cs6
And mytimeline is like Cs5

NO!~ is CS6 i'm very sure

How to import analog audio into garage band

I have an iMac with 2.5 GHz Intel Core 5i 8 GB memory OSX 10.7.5 and I am trying to import analog audio from a reel to reel tape deck so I can edit it and burn to a CD. I have a elgato video capture device with RCA female plugs on one side and USB on the other. (I've used this device to import analog video and audio to iMovie and Adobe Premiere Elements). I am told that I could import analog audio to Garage Band to edit and burn , however when I launch Garage Band I am not sure what part of the program I should be selecting and how to go about importing the analog audio. Any help would be greatly appreciated.
Teddy

teddyfromhauppauge wrote:
I am not sure what part of the program I should be selecting
http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface
(Let the page FULLY load. The link to your answer is at the top of your screen)
teddyfromhauppauge wrote:
how to go about importing recording the analog audio.
http://www.bulletsandbones.com/GB/GBFAQ.html#recordusingaudiointerface
(Let the page FULLY load. The link to your answer is at the top of your screen)

How can I import MP3 audio files into premiere pro cs5?

Can any one help?
How can I import MP3 audio files into premiere pro cs5?

It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
fifa 14 coins
cheap fifa coins

While trying to import an audio CD, I get an error message, "you don't have the privilege to make changes"

I'm trying to import an audio CD into iTunes, but I keep getting a message saying, "Error occurred while converting the file . . . You do not have the privilege to make changes." I've tried selecting all the different encoders, WAV, MP3 and AAC, and still nothing works. I would appreciate the help.

Try HT203242: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2

Unable to+decode+or+import+selected+audio

Looking for a solution. I am running windows 7, adobe captivate 4. I have attempted to convert text to speech, I get the error unable to+decode+or+import+selected+audio. I have gone to the supplied library same error. I have taken a mp3, changed it to 16 bit rate, made the file very small same error. I am running out of options. I have also reinstalled captivate. I also have CS5 running on the machine. Any suggestions?

Hi,
Re-install the Neo-speech installer and try the workflow.
Regards,
Vikranth.

Import Powerpoint Audio

Similar Messages

Maybe you are looking for