Import problem on Vista with datapump

Hi
I've got a problem with an import into an Oracle XE database server on Vista, I keep getting Ora error "39070 Can't create log file" when executing an impdp command, whereas exactly the same command is working perfectly on Windows XP.
Here is what I'm doing: I want to create a new DB on a target laptop that runs under Vista. I have Oracle XE installed on both my source laptop where I have the source DB and on the target laptop running Vista. I export the DB on the source laptop with expdp (no problems), then copy the export dir content over to the target laptop, then create the user and all the necessary stuff on the traget laptop XE DB server (account unlock, grant create, then create dir (where the DB dump is) and grant read write on that dir to the new user), then use an impdp command like this:
impdp <user>/<password> directory=<newdb> dumpfile=newdb_schema.dmp logfile=newdb_imp.log
to import the data in the DB on the target laptop.
This fails miserably, whereas it succeeds without problems if I do exactly the same on a Win XP desktop machine set up exactly the same way !
On top of that, I succeeded 6 months ago to do the same thing on that Vista laptop, but now it refuses to work.
What's going on ? Are there known problems with the datapump on Vista, or is it a protection problem, i.e. no rights for the datapump process to write a log file in the dir where the db dump is ? What's the way to get it working ?
Thanks for your help, I'm really stuck with that one.
Regards
Balex

Which privileges has Vista user?
On Vista you must explicitly to give user ADMIN rights....
HTH

Similar Messages

LR3.2 import problem on computer with Windows OS

LR3.2 import problem on Windows OS
This is a continuation of a question that I posed on August 22, 2010 in the discussion string "Cannot import CR2". I have not been able to resolve the issue of importing an image into an existing folder location. I had not been able to work on this issue for a number of weeks due to other circumstances, until today.   Note that the following people had attempted to provide answers and suggestions already: ssprengel, JayS In CT.
I use a laptop with a Windows operating system and a Macintosh desktop with Snow Leopard. I run Lightroom on both of them. The Windows laptop has Windows Vista Home service pack 2, version 6.0 [6002]. Around August 12th I upgraded from Lightroom 2 [481478], to Lightroom 3 on the laptop. I left the LR2 on the laptop as well as LR3. On September 12th I upgraded the laptop to LR3.2. No other changes have been to the laptop or its software applications that I know of.
My current attempts at resolving the issue reveal that when I created a new catalog "Test Catalog" in LR3 and saved that catalog to my desktop new folder labeled "Test Catalog" that I can import an image into LR3.2 to a new folder on the laptop's desktop. I then deleted the images via LR3.2 Folders Remove function and tried to import the images into an existing folder as presented in the LR3.2 Import dialog, but get the error message "The following files were not imported because they could not be read.".   When I import images into a new folder placed on the desktop, I can use all functions in LR3 e.g. Develop module. I cannot import images into existing folders on the laptop's hard drive - I have tried importing into the entire existing folders in the following hierarchy: c:\users\Michael\My Documents\My Pictures\2010 but always get the same error message.
LR3.2 does correctly backups upon exiting each time I quit the program, so I know that there isn't any issue of writing to that backup folder which is contained in an upper folder that contains the lightroom catalogs. I have even created a new Word file, saved it into the folder with Lightroom catalogs, opened it up, modified it, saved it, and saw that it works OK, so that tells me there is no problem with a Read-Only folder attribute.
I cannot recall if upon the upgrade from LR2.6 to LR3 that I chose to upgrade the catalog to LR3 version. Would that matter, if yes, what do I verify, how do I manual upgrade the catalog.
History of actions between August 10th that I have taken follows between the [[[[ and ]]]]:
[[[[Preference settings for Default Catalog are set to start with a specific catalog that I call "Lightroom master catalog", it is not set to the "Load most recent catalog".
All of the following were using my laptop: Previously I had no problem with LR2 for any functions. I just purchased an Epson 7000 media storage device, and in early August and practiced importing images into LR2, and those images were pulled in OK. Next, I upgraded to LR3. I discovered that the Epson's images had been placed into a wrong folder when I opened LR3. I used the remapping function in LR3 to move the images into the correct folder. Next, I used a SanDisk card reader to import images into LR3 into an existing folder of images, but the following error message appeared "the following files were not imported because they could not be read" (Import Results said 'some import operations were not performed'). I tried importing a single image, and multiple images, but had the same error. I tried switching the card reader to each of 4 different USB port on the laptop, with the same error occurring on each USB port used.
In order to try to isolate the problem. I took the SanDisk card reader with the memory card and successfully imported the images into LR3 on my Macintosh desktop computer; so to me the problem is not the card reader or the memory card. I also used the SanDisk recovery disk while using my laptop to look at the files on the memory card and I could see all the images correctly while in the recovery program, but I have not copied the images to the laptop's hard disk, and have not tried an import into the laptop's LR3. I did not import images directly from my camera to the laptop LR3 since I did not think it would help with the troubleshooting.
I then ran the Repair from the Adobe LR3 CD upgrade disk, on my laptop. Then I tried doing the import using the SanDisk reader and memory card, but the same problem occurred and same error message, that the files could not be imported (I was trying to import into a folder of existing images). I then used the Laptop's Control Panel function to remove LR3 application. Then I did a fresh upgrade of LR3 on my laptop, but the same error message and I am unable to do any import of the memory card from the card reader. I then tried to do an image import from the Epson 7000 into the laptop, and the same error message and I am unable to do any import into a folder with existing images.   I then tried doing an image import into LR2 on the laptop, and got the same problem to occur when trying to import into an existing folder of images. I have a couple of Canon EOS SLR digital cameras, and the issue occurs for any of the file types of the cameras.
Went into LR3 Preferences, General Tab, I now checked the previously unchecked box for Import Options - "Show import dialog when a memory card is detected".
Connected the Canon XTi directly with a cable to the laptop computer. Note that Canon's information said that Picture Transfer Protocol is automatically used when the XTi is directly connected to a computer, so I did not need to change anything in the camera's menu for communications choices (there is no communication menu in fact). I selected one image and copied it to the laptop desktop. Tried to import it into LR3 into a folder of existing images but got the error message "Could not copy a file to the requested location." While in LR3, I changed the location of where the file would be copied into - any of my existing folders of images; tried 5 different folders, but kept getting the same error message.
With the card reader connected via USB port on the laptop, I copied one image file to the desktop, and then tried importing into LR3 into a folder of existing images. Got the error message "Could not copy a file to the requested location."]]]]

I am not clear if by 'import' you are trying to copy or move the files from a location to another or if you are adding the files to a catalog. My comments may not, therefore, be too helpful.
Firstly, with both LR2 and LR3 installed you will have both catalogs present, but if you try to open the LR2 catalog with LR3 you will be prompted to update the catalog. You will thus know which catalog you are working on.
Secondly, if you are reading direct from the camera, you should connect using the 'PC connection' mode.
Thirdly, there is an issue with reading .CR2 files directly from the early Canon DSLRs (in Europe named 300D, 350D, 400D). While they are visible with the Canon software, they can not be seen with Windows explorer nor can they be accessed with Lightroom.
I suggest that you take the CF card out of the camera and copy the files using Windows Explorer in to the destination folder. You are then sure that the files are on the PC.
If you have the right Codec installed, you can view them with Windows photo gallery; if you don't, you can use one of the Canon software packages to view the files. You are then sure that the files are not corrupted.
Then import the files to your LR catalog using the normal import routine selecting 'add without moving'. I have tried this routine successfully using my 350D using both LR1.x and LR3.x. If that doesn't work - I'm lost.
Frank

Problems using vista with boot camp

Hello,
I am currently running vista with boot camp and I have been experiencing a few issues. First on the windows partition it claims that no sound driver is installed-is there an easy fix to this? Also I have been trying to plug in my WD My Book USB external hard drive but I cannot find it to use...although in the device manager it claims that it is working properly. Thanks guys

When you first installed Windows did you install the drivers that came on your Leopard Installation disk?
If not then boot into Windows and get to the Vista Desktop. At this time, insert your Leopard Installation disk in the drive. This should automatically begin installing the Boot Camp 2.0 hardware drivers on your partition. Once completed, you will be asked to reboot into Windows and then you should be all set.
Axel F.

Import problem DVCPRO 25 with CS5.5

I have a problem with importing a 60 min DVCPRO 25 file from P2 into CS5.5. I worked with the file in CS4 project before and it worked fine (the file had been split into two parts while recording with a HVX200, but it is handled as one file in NLE) Now I wanted to import the file into a new project with CS5.5 but the import process gets stuck and Premiere hangs. Any idea or similar experiences with this?

Yes, effectively I have
DesignStandard_CS5_5_Content_ALL.exe
DesignStandard_CS5_5_LS4.7z
DesignStandard_CS5_5_LS4.exe
Illustrator_15_1_Content_LS4.exe
InDesignFamily_7_5_Content_ALL.exe
Then I run the DesignStandard_CS5_5_LS4.exe but it finished by :
'Un problème s'est produit lors de l'extraction de certains fichiers. Vérifiez l'espace disponible sur l'ordinateur ainsi que les droits d'accès en écriture pour le dossier de destination'
->
'A problem occurred while extracting some files. Check the available space on the computer as well as write access to the destination folder rights'
All of this is ok, I do installation wiith local administrator user, and the PC is a Win7 computer ... so I don't know why installation isn't running correctly...
Thank you for your help

Microphone problems in Vista with XFI-ExtremeGa

Recently purchased the XFI and installed using just the creative drivers from this website (the 5th March release) however I am now totally confused.. do I install ANY of the software from the XFI installation CD?Secondly, how do I mute the microphone? I have it plugged into the rightmost socket on the back of the card (the white socket) but several things are not working. At no place inside Vista can I mute the mic.. if I turn the recording volume to 0% it doesn't make any difference, also without using the +20% mic boost any voice is incredibly quiet despite maximum recording volume, however if I use mic boost I get horrible hissing continuously!?So to summarize.. Microphone volume doesn't work at all?and no option to mute the mic, I have just a limited control panel with effects which seem to make little difference to sound quality and I am left wondering what I have bought for ?60.00 exactly?Anything I am doing wrong?

)? No, don't install any of the apps, they are XP only (the ones that came on CD). If you want applications search the forums for "UPAX" although these are hacked chinese drivers \ apps so use at your own risk.
Don't bother asking when you will get drivers \ applications, nobody knows when\if you will. 2a) ? Open Control panel, open "Sound", on playback devices select speakers, right click and select properties. Select "levels" and mute whichever input your mic is plugged into. 2b) http://forums.creative.com/creativel...message.id=254. In short you are screwed.
Additionally, if you just bought the card you have a couple of options:?)? Return it now, do some research and find a card with working\decent vista support. They are out there. (I would do this if I could but I am stuck with this thing for the time being.)?2)? Wait for CL to get their act together but you may have to wait a long time. Historically they release drivers every quarter and they just released a very disappointing set of drivers two weeks ago. They will not communicate their plans or disseminate any information to the sheeple that bought their product so noone has any clue when anything will be fixed or when or if?apps will be available.

When I have several tabs open, at some point I cannot delete any of the tabs. I have to restart FF to correct problem.Using Vista with FF V8

Tabs open HSX (2 or 3 for gaming)
plus Face Book and Mafia Wars. This has happened about 10 times so far.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Problem importing and exporting files in Vista with 5.0

When I nsert my 1 GB card for an Adobe upload, it starts the process fine but about 1/2 way through it stops the upload and gives an error message "Cannot obtain all of the files from this device".
I am able to go ack and select the files which weren't uploaded and the process works fine.
I seem to be having the samee problem exporting to a removable disk. It only exportsd so many filkes and then it says it can't complete the process.
This problem is new with my Vista computer and 5.0. I have all the latest updates loaded.

Chuck,
When was the last time you check for updates. There is one specifically for
Vista. Having said that, this doesn't really sound like a Vista issue.
You might want to post this in the technical issues forum.
Cheers

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

Annoyed with JVC/Final Cut Pro import problem; will they ever fix this?

Annoyed with Final Cut Pro JVC import problem; will they ever fix this?
I've shot footage on JVC GY-HD111E in the UK in 720p/25p PAL mode.
I'm trying to import lots of short clips (average 10 seconds) into Final Cut Pro (latest version with 720p/25p support) with a new Mac Pro maxed out with ram and 3 extra internal HDs.
Problem is, on a scene-break i.e. pause/stop, Final Cut detects this and creates a new clip, but it takes about 5 seconds to 'searching for media" before it starts the new clip. Because some clips are only very short, this 5 second delay sometimes means I only get the final few frames of a clip, rather than the entire 5 seconds or so of it.
JVC UK are blaming Apple and are saying it is up to them to fix it as Premiere and Edius does not have this problem.
However, Symbiosis in the UK (who do HD-Connect box) say that the JVC ProHD cameras do not wrap the shots up properly at the end, they are kind of left open and this creates problems on scene-breaks.
I've tried turning off the "create new clip on timecode break" etc, but it does not make any difference, when I do this it simply quits capturing on a scene break. Besides I have about 300 cutaways like this and I don't want to spend the rest of the year breaking them up on the timeline as this would be a futile and long workflow.
I'm importing and working on a native HDV 720p/25p timeline and this is the way I want to work. I've already imported and edited 4 hours of footage, but these 4 hours were easy as all 4 tapes had no start/stop points, they were recorded continuously from beginning to end of tape for 64 minutes each time so importing was no problem; 1 clip per tape.
But now I've come to my 5 tapes containing hundreds of cutaways I'm kind of screwed and need some advise on how I can import them natively in HDV without losing this 5 seconds off the beginning of each clip whilst FCP searches for the media each time.
I've been told this issue is definately with FCP, any ideas how I can get around this?

I haven't heard of this JVC/FCP problem, so I can't comment on it. However, whoever shot the cutaways didn't do you, the editor, any favors.
I've been doing video since 1984, and I've got to say, anyone who shoots a scene that is only 5 or 6 seconds long on tape is making a huge mistake, and it's been that way since the beginning of computerized editing in the late 70s.
Shoot at least 5 seconds of pre-roll before the shot begins, then roll tape for at least 5 seconds after you've got the shot. That's the protocol I've followed for 22 years now. Tape is cheap, edit suite time isn't.
But laying down only 5 to 6 seconds for a scene is wrong, IMO.

Imported slideshows from iPhoto with problems

I am new to Aperture, but I am trying it out because of a bug causing problems with slideshows in iPhoto. I imported the the library with albums and slideshows from iPhoto. When trying to view slide shows in Aperture, a lot of the photos do not focus/show very low resolution. I have searched the settings and checked the originals' metadata without finding any obvious explanations. Does anyone else have experience with this. Are my settings wrong, or could it be problems carried over from iPhoto?

It seems edited photos from iPhoto library does not change the original photos where they were imported from.
That's correct. iPhoto will never change the Original photo.
iPhoto is a Digital Asset Manager and treats your original file like a film shooter treated the negative. It preserves it at all costs. So, every operation - editing, exporting etc - are carried out on a copy of the original file.
As Apearl suggests, you may be using more disk space than you need: Are you running a Managed or a Referenced Library?
A +Managed library+, is the default setting, and iPhoto copies files into the iPhoto Library when Importing
A +Referenced Library+ is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. In this scenario you are responsible for the File Management.
Regards
TD

AVI with ac3 import problem

hi
sorry for my bad english
0.avi opens in adobe premiere pro cs6 without any problem.
mediainfo result for 0.avi:
General
Complete name                            : C:\Users\User\Desktop\****\0.avi
Format                                   : AVI
Format/Info                              : Audio Video Interleave
File size                                : 232 MiB
Duration                                 : 18mn 52s
Overall bit rate                         : 1 722 Kbps
Video
ID                                       : 0
Format                                   : MPEG-4 Visual
Format profile                           : Advanced Simple@L5
Format settings, BVOP                    : 1
Format settings, QPel                    : No
Format settings, GMC                     : No warppoints
Format settings, Matrix                  : Custom
Codec ID                                 : XVID
Codec ID/Hint                            : XviD
Duration                                 : 18mn 52s
Bit rate                                 : 1 261 Kbps
Width                                    : 720 pixels
Height                                   : 304 pixels
Display aspect ratio                     : 2.35:1
Frame rate                               : 23.976 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 0.240
Stream size                              : 170 MiB (73%)
Writing library                          : XviD 65
Audio
ID                                       : 1
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 2000
Duration                                 : 18mn 52s
Bit rate mode                            : Constant
Bit rate                                 : 448 Kbps
Channel(s)                               : 6 channels
Channel positions                        : Front: L C R, Side: L R, LFE
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Stream size                              : 60.5 MiB (26%)
Alignment                                : Aligned on interleaves
Interleave, duration                     : 32 ms (0.77 video frame
but when i import 1.avi it gives error:
the file contains an unsupported audio format.
mediainfo result for 1.avi:
General
Complete name                            : C:\Users\User\Desktop\****\1.avi
Format                                   : AVI
Format/Info                              : Audio Video Interleave
File size                                : 67.2 MiB
Duration                                 : 4mn 27s
Overall bit rate                         : 2 106 Kbps
Video
ID                                       : 0
Format                                   : MPEG-4 Visual
Format profile                           : Advanced Simple@L5
Format settings, BVOP                    : 1
Format settings, QPel                    : No
Format settings, GMC                     : No warppoints
Format settings, Matrix                  : Custom
Codec ID                                 : XVID
Codec ID/Hint                            : XviD
Duration                                 : 4mn 27s
Bit rate                                 : 1 500 Kbps
Width                                    : 704 pixels
Height                                   : 384 pixels
Display aspect ratio                     : 1.85:1
Frame rate                               : 23.976 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 0.231
Stream size                              : 47.9 MiB (71%)
Writing library                          : XviD 64
Audio #1
ID                                       : 1
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 2000
Duration                                 : 4mn 27s
Bit rate mode                            : Constant
Bit rate                                 : 384 Kbps
Channel(s)                               : 6 channels
Channel positions                        : Front: L C R, Side: L R, LFE
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Delay relative to video                  : 32ms
Stream size                              : 12.3 MiB (18%)
Alignment                                : Split accross interleaves
Interleave, duration                     : 32 ms (0.77 video frame)
Audio #2
ID                                       : 2
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 2000
Duration                                 : 4mn 27s
Bit rate mode                            : Constant
Bit rate                                 : 192 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Stream size                              : 6.13 MiB (9%)
Alignment                                : Aligned on interleaves
Interleave, duration                     : 32 ms (0.77 video frame)
and when i extract video and ac3 file from 1.avi with avidemux then i can import them separately. but after importing audio and video in timeline audio length not same with video.
the length difference in the image:

Hi,
I don't have GraphicConverter and since it is shareware and money is tight right now, I tried to find a freeware image converter on the internet for the Mac. I didn't. I remembered that I have Photoshop Essentials. It came with my Canon scanner. I installed it and looked to see if it had a converter of some type in it. I saw that you can import a file, work with it and then save it to what you want. I thought that I had already done that with the Nikon files. Anyway, I tested it. I imported one of the Nikon images into it and saved it as a jpeg- even though it appeared to be a jpeg already. Bingo! It worked. It imported into my video editing program. I selected two other files from the Nikon shots and did the same thing. I change the name of the picture and then save it as a jpeg in Photoshop Essentials 2. The two files imported into my video editing program. I then went to the two original Nikon files that I had imported into Photoshop Essentials 2 and changed the names of them- leaving the jpeg extension on to see if they would import, they did not. So, as you said, there must by some kind of Metadata with those files. Bringing them into Photoshop Essentials 2 and saving them as jpegs fixed it. Because of what happened, I just went through my approx. 4,000 pictures and selected about 1,400 again for a new family DVD. I created folder and exported 1,446 jpeg pictures into it. Then I opened by video editing program and imported the folder. All 1,446 pictures came in. I didn't try it with FCE and iMovie, since I the program I regularly use is Adobe Premiere. I may try it later, but I am pretty confident that if the pictures can be imported into Adobe Premiere, they can also be imported into FCE and iMovie(unless there is a number limit.)
All this has taken place over several days. I am glad that it is figured out.
Thank you for the help.

Traport importing problem with repeating return code error 8

Hi all,
We are facing some transport import problem.When we sent transport initially AAA900244,they faced with return code error 8 and syntax error 109.As the information provided by the client,one of the include program which is not availble at client system that was included in this transport.So that was the problem.Again we have taken new tranport AAA900247 without this include program then same type of error message they faced with return code error 8 and syntax error 109 in the include program when imported.
I have one doubt, when importing new transport this should overwrite the earlier transport data.Why the same type error client is getting.What might be the reason.
Is earlier transport imported?? Why it throwing same type error.What actually the fuctionality of Return code 8 whether it is imported or discarded.
Thanks in advance.
Regards.....Balu

Hi Ramesh,
That include is not at all required at client system.So next time when we have taken transport we have not included this include program.They imported new transport without this include program.But they are facing same error as they faced first time. What could be reason??
Regards...Balu

Application import problems with current apex on 11.1.0.7 and 11.1.0.6

Hello,
i have Application Express 3.2.1.00.10 up and running so far.
11.1.0.7 patch is applied.
I can't import an recently exported application with apex.
error: The requested URL /apex/wwv_flow.accept was not found on this server.
If i try to copy the application i got:
ORA-01536: Speicherplatz-Zuteilung für Tablespace 'SYSAUX' überschritten
Unable to copy application 123.
Certainly there is no trouble with sysaux tablespace.
Importing an export file with sqlplus works.
- How to modify the export file to generate a new application?
- Is it possible without running in any primary key violation?
Thank you
Michael

Hi Michael,
one of your error describes that the SYSAUX tablespace can not allocate more memory. You need to extend one sysaux datafile:
Example extend sysaux datafile to 2GB:
ALTER DATABASE
DATAFILE '/data/xe/oradata/sysaux.dbf' RESIZE 2048000K;

Import problem with DMP file

Hi all
I am using oracle 9i and I have problem in import problem.........
when i try to import the DMP file it gives me the error,
IMP-000200: long column Too larege for column buffer size <22>
can any body please tell me how to get out of this error....
actually I have a table in export file that has round about 2 lac rows....
The problem occurs on that table.
Any help will be highly appreciated
Thanks in advance
Regards
Shayan
[email protected]

The correct error code is IMP-00020 not 200
What's your current buffer set to when imp?
IMP-00020: long column too large for column buffer size (number)
Cause: The column buffer is too small. This usually occurs when importing LONG data.
Action: Increase the insert buffer size 10,000 bytes at a time (for example). Use this step-by-step approach because a buffer size that is too large may cause a similar problem.
As adviced, increase 10000 and try again.

LAN problems in Vista

Hi all, I have a computer running vista with NVIDEA LAN. For some reason it decided to add LAN points and now I get I cannot use LAN to get to the NET, radio works OK, I get that the LAN port is unplugged, My router says its not, the cable has been tested
and replaced with the other machine. I get that the LAN port is LAN 2 cable unplugged. (lights on computer also indicate connection. The router shows slow flashing light and goes red when computer shut down. All that indicates its a software fault / glitch.
I have tried to discover the reason and have discovered that there are siblings for LAN port all having the same irretrievable but in same location reg but added with sibling numbers.
I cannot "delete" the driver / item, which if I could would mean all LAN wiped but "refound" on machine restart. The machine appears to remove the LAN, but it does not.
Its annoying having to run the Radio connection as it reduces speed to the printers. Any body any ideas. This started after an MS update some 3 months ago.

Proxie_dk,
Also,
You might want to make sure that you have done the following to try and help resolve or workaround the problem more:
Make sure you have set the correct timinns and voltages for Mushkin memory in BIOS, more information at Mushkin website under support.
Make sure you have the latest version of the BIOS for your motherboard, as several manufacturers did release updates for the problems with NVIDIA and Creative compatability. Look at support section on the XFX support site.
Make sure you are using the latest motherboard chipset drivers available from NVIDIA. 5.25 is the latest, and the international package is here.
Make sure you are using the latest graphics drivers available from NVIDIA. 86.8 is the latest, and the international package is here.
Also, perhaps not as important as the above, make sure you have the latest Windows Updates installed using Microsoft Update.

Import problem on Vista with datapump

Similar Messages

Maybe you are looking for