Import Problems with JVC EVERIO HD7 Hard Drive Camcorder

So i just got this new camcorder and low and behold the format it puts out the video in isnt accepted by iMovie HD, the files are in .MOI and .TOD format, any help on getting formatting them right would be greatly appreciated

I've been having the same problem - trying to import files from a JVC GZ HD-10 and the files not being recognised. I've downloaded the QT components as per the above post, but when I try to install them I get this message:
'The installer can't detect an earlier version or proper version for installing this upgrade. Close this message box to end the installation procedure.'
What exactly can't it detect an earlier version of? Does it mean Quicktime? Final cut Pro? Has anyone found a way to successfully import files from a JVC camcorder directly into a Mac with the same spec as mine?

Similar Messages

  • Slow system – problem with OS, software, memory, hard drive?

    I am running a MacBookPro5,3 (Intel Core 2 Duo – 2.8 GHz, Memory = 2 x 4 GB, Hard drive = NVidia 500 GB - 100GB of which is free space), using Mac OS X 10.6.3.
    I was running 10.6.6. Then attempted a software update to 10.6.7 and the system essentially stopped working, Was able to back up data using target disk mode, and then reinstalled 10.6.3 using a purchased snow leopard DVD (had lost the disk that came with the computer). Worked for a while but have been having issues with increasingly long and frequent system slow downs (spinning beach ball). Recently attempted another system update, and the update failed and wasn't able to do anything. Used the 10.6.3 dvd and did a disk utility check – it initially said there was a problem with the hard drive – but on another restart from the DVD this issue disappeared (but still no working OS). Attempted connection of my computer to another laptop using target disk mode – this failed to show the target hard drive and only showed the dvd which was in the computer booted up in target disk mode.
    At this point rebooted using the DVD and was able again to install system 10.6.3. However, there are still occasions of sporadic slow-downs associated with specific applications (spinning beach ball for anywhere from 5 – 120 sec). Ran disk utility from the DVD again – states that the permissions and the hard drive is OK. Also, ran a memory test (using Rember) which stated that everything was fine (although the test took nearly 2 hours to run and was punctuated by much spinning beach ball activity).
    At this stage i am not sure whether I have a problem with memory, the hard drive, the OS or the software. Clearly something is not right – are there any other options to test my system (since I don't have the original dvd – I haven't been able to run a system hardware test) - other third party options?
    Thanks in advance for any advice, and apologies for long post.
    Rob

    Sounds like a failing hard drive or SATA controller. It's not clear whether you have a backup of your data. If not, you should remove the hard drive from the machine and install it an external enclosure or dock, then back it up using another Mac. Then take the unit to an authorized service outlet for testing.

  • Bridge: problems with exporting files onto hard drive

    Hi -- I regularly export my files on Bridge to my hard drive and this morning it is not working. It goes so far as to show me the job process box (with the bar that shows the level of completion), but after that nothing happens. The bar is blank and photos are not exported. Anybody have any ideas as to why and how to fix this?

    A lot more DETAILED information will be needed before anyone can help you.
    Bridge doesn't import or "export" anything.  Your files are never "in" Bridge.  Bridge simple reflects the location of the files wherever you put them on your disk(s). When you move them (not "export" them), they're simply moved or copied, depending on their location, to a new location.
    In any event, more info from you is needed.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Problem with itunes and external hard drive

    I've have recently downloaded the newest version of itunes, I also have an external hard drive with 40gbs of music on.
    When I open itunes preferences and set library to an external one, none of my music copies to itunes.
    I have tried to individually copy music folders to itunes, but my whole mac freeze's
    Any advice please?

    You might find this article useful: iLounge - Managing your iTunes Library on an External Hard Drive

  • Does iMovie 08 work with JVC Everio HD-GD7 HD camcorder?

    I am considering getting the JVC Everio GD7. Can the HD video be imported into iMovie 08 via USB without conversion, or what are the extra steps?

    YES and there are multiple postings here with complete information
    Also visit:
    http://www.dvinfo.net/conf/forumdisplay.php?f=156
    A Users Group with answers to al your questions.

  • Many Problems With Ipod Video--Corrupt Hard Drive?

    Hello,
    I got this iPod 30 GB the christmas of 2005. Ever since a few weeks ago, my iPod started giving me my corrupt messages, so then, I kept restoring and it was fine. This again happened to me recently and haven't resolved it yet. So here is my story:
    I did the 5R's = Nothing
    I renamed it later in the alphabet = Nothing.
    I also must add that I have plugged it in and when I go to 'my computer' to try and format like others said, it freezes; on the 'my computer' & 'iTunes'. I really hope you guys can help me.
    I also noticed when I was looking at the about section on my iPod, it says my capacity is like 27.8 GB and available is 10.4 GB, so I don't know if that will help.
    I really don't want to buy a new one and hopefully you guys can help me out. Thanks in advance.
    Gateway MX6124   Windows XP   iPod Video 30GB - 5th Gen

    No problem. Have you tried this iPod on another computer?
    Also, while everything else is disconnected, connect your iPod and force it into disk mode. If your computer can see it, reformat your iPod (FAT32, not a quick format) and then give it a drive letter of M or P.
    Disconnect the iPod and reload the USB Driver:http://docs.info.apple.com/article.html?artnum=305136
    Pay attention to the last item in the article, and reload the USB driver even if no new ones are available for your computer.
    Reconnect your iPod and see if you can Restore it.

  • PC hard drive died and I have replaced it.  Need to import the music on my iPod, but get a message that it's synced with another library (old hard drive).  How do I import the music onto new hard drive? Senuti's just for macs.No old hard drive to copy.

    My PC hard drive died and I have replaced it.  Need to import the music on my classic iPod, but get a message that it's synced with another library (old hard drive).  How do I import the music onto the new hard drive? Senuti (one respondent's suggestion) is just for macs. I have no old hard drive to copy to the new hard drive (another respondent's suggestion.)

    See this older thread from another forum member Zevoneer on different ways to copy music from your iPod back to your PC.
    https://discussions.apple.com/thread/2417169?start=0&tstart=0
    B-rock

  • I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

    i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
    did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
    thanks for your help

    It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Source means the external old drive. Destination means the new internal drive.

  • FCE 4 and JVC everio hd7 "easy set up"

    Ok I currently have a JVC everio hd7 which is a hard drive based cam. I also bought FCE 4 but I am exhausted of importing clips to imovie6 and then FC. I would like to know if anyone has had any luck with these two?

    Not sure why you are going through iMovie first. Sounds like you are in the same boat I am with my hard drive based Sony cam. If your JVC saves clips as MPG, you have to use MPEG Streamclip to convert them. There is a batch save option which allows you to save all your clips in the same format, then you can walk away and let it do the work. Go to http://www.squared5.com to download the free software. Use these settings when you export:
    Export to Quicktime
    Compression: Apple DV/DVCPRO - NTSC
    Quality: 100%
    Frame Size: 854 x 480 (16:9) [If your camera is 16:9, which most new cameras are.]
    Be sure to deselect "Interlaced Scaling" and "Reinterlace Chroma" so you don't get that jittery effect.
    The mov files will end up being twice the size of the mpg, but according to Ian Brown, that's normal.

  • What is the Best Hard Drive Camcorder for/compatible with FCP?

    Hi,
    Just bought a JVC GZ-HD7...feel very trouble...unlike those MiniDV Cassette base Cam,Just plug in FireWire and FCP will read!!!To use the GZ-HD7 in FCP might use a lot of steps to convert before inport the source.
    And now i'ld like to invest Hard Drive Camcorder for my FCP editing base,Is it a Good Media Format?
    If yes,Which Prosumer or Semi-Pro Camcorder will you recommend?Really need your helps,maybe you are the one who are currently using it and feel happy with over all?!
    Hope to get some suggestion from you guys!!
    Thanks!!

    http://panasonic.co.jp/pavc/global/videocamera/hd/global/products/hdc-sd9/
    Thanks for tip David. I work at a middle school, we shoot a lot of district functions with three cameras then use the multiclip function of FCP. If I bought three of these cameras do you think they will work well in that environment? here is our workflow:
    1. Sync cameras with a clapper at the start of show.
    2. Import into FCP
    3. Mark inpoint at the sound of the clapper
    4. Create the multiclip sequence and edit
    We have done 50 or so shows like this with 14 year olds as the editors and the results are very nice. I would like to move to the hard drive based camera. Being in education we are on a tight budget. Think three of these camerass would work in this environment?
    Thanks so much for your expert advice.

  • Importing .mxf Files from an external hard drive...

    Any advice or tips would be greatly appreciated. My problem comes close to others discussed, but I haven't been able to find a duplicate post. And I apologize for the length; I just want to give you as much info. as possible (I also put details in my signature) to help you help me.
    I shot a short film using Panasonic's HVX200 camera, filming in HD 720p/24p, and downloaded each P2 card through a PC laptop into a LaCie Brick external hard drive. I was originally planning on editing the footage with Adobe Premiere Pro 2.0, but became frustrated with how much trouble it was having handling the .mxf files. Assured by Apple salespeople that FCP 5 would have no problem importing the footage from an external hard drive, I purchased the computer described in my signature.
    Now I know that FCP/Apple only supports importing footage from the P2 card directly, and not from an external hard drive. A representative from ProMax.com was able to help me out, however. First, he had me copy the footage files onto my Mac internal drive from the external hard drive. Then, he had me select IMPORT -> PANASONIC P2. Then, I was to highlight the CONTENTS folder and import away. And it worked... sort of.
    There are two major problems: 1) During this transfer, not all of the footage is making it across. I import it, and then get the much-talked about "one or more P2 clips failed to import; probable incomplete or corrupt clips" warning. After checking the original video folder on the internal hard drive and comparing it to the number of clips FCP imported, I learned that I had lost around 20 clips/video files at one point. Other shooting day transfers worked completely smoothly with all of the files imported (we split up the footage by shooting day, without touching or changing the CONTENTS folders). So, some transfers work and some don't. And 2) When I try to import the files from our 4th day of shooting, I get a "Selected path does not contain a P2 volume." Nothing is imported.
    So, that's my situation, and I'm getting very desperate. I know that I'm not doing things in the Apple-supported way, but I'm really hoping there's still someway to successfully get the files from the external hard drive into FCP completely. It seems to work some of the time.
    Final notes: When importing, I make sure to import the entire CONTENTS folder. There is never a LASTCLIP.TXT file listed under it in the window, but some of the days of footage have transferred perfectly, so I'm hoping that's not a dealbreaker. If it is, isn't there some way to rebuild a lastclip.txt file? I don't even know if that's the issue. And one last note: In most of my folders, the "CLIP" folder has a number of files in it. In the 4th day's footage that I can't import at all, I noticed that the CLIP folder is empty. And on the days where FCP isn't importing all the files (like I mentioned above), there isn't a CLIP file for every single VIDEO file. Could this be the main problem? Along this line, is there a way to somehow put the footage on the external hard drive back through a p2 card and then into the Mac?
    Okay, I'll stop typing. Thank you so, so much for any help.
    Tom
    PowerMac G5 (Dual 2.3 GHz)   Mac OS X (10.4.6)   Quicktime 7.1.1 - Final Cut Pro 5.1 - Aforementioned External Hard Drive: LaCie Brick (FAT 32 based)
    PowerMac G5   Mac OS X (10.4.6)  

    The problem didn't turn out to be as complicated as I had thought. The process I described above ended up working fine, and I'll explain how. And this is a cool workaround, because the AppleCare helpers told me that they didn't think it would work (FCP P2 import is only supported straight from the P2 card/viewer or the camera).
    I hooked up my external hard drive to the Power Mac G5, and copied the files and folders onto my internal scratch disk. Then, I opened FCP and chose IMPORT -> Panasonic P2. I chose the "CONTENTS" folder for each day's filming, and imported them in, no problems. There was no visible "lastclip.txt" file shown (under the "CONTENTS" folder or anywhere else), but this didn't seem to cause any problems.
    The reason that not all of the footage was bring imported (the aforementioned "one or more P2 clips failed..." warning) was because we were missing clip files (in the CLIP folder) corresponding to certain video files (in the VIDEO folder). Luckily, we had just forgotten to transfer all of them from the original external hard drive, and once we transfered them completely, FCP could read all the video files. FCP needs a clip file for every video file in order to make it work (that's why our aforementioned "Day 4" could not be read; we hadn't copied all of the clip files over with the video files).
    Even after we did this, we STILL were getting the "one or more P2 clips..." warning for our Day 5. After taking a look at all the folders, we figured out that there were still more files in the VIDEO folder than in the CLIP folder, even after we transferred them all over. Finally, we figured out what had happened. For some reason, some of the audio files for some of the clips had been included in the VIDEO folder for our Day 5. There is no way we did this accidentally; somehow, the HVX200 placed some of the audio files into both the VIDEO and AUDIO folders. And FCP was trying to read those as video files, and therefore couldn't find the corresponding clips in the CLIP folder. After making sure that those audio files were also in the AUDIO folder, we simply deleted them from the VIDEO folder and stopped getting the "failed to import" warning.
    Final thing to share: If we had actually been unable to find the corresponding clip files in our original external hard drive, we had also found a potential solution (that we didn't end up needing to try). You can record from FCP back onto the P2 card, in the hopes that the clip files would be regenerated when you re-import it into FCP. I received a PDF file about this process, and I'm not sure how to put it up on the page here. If interested in this described process (which, again, I can't fully vouch for), feel free to email me at [email protected] and I can forward it to you.
    Hope this helps.
    PowerMac G5   Mac OS X (10.4.6)  
    PowerMac G5   Mac OS X (10.4.6)  

  • JVC Everio GZ-MG630 60GB Camcorder Compatibility with FCP

    I was wanting to get a little cheap & compact camcorder for carrying around and do away with tapes at the same time. Has anyone had any luck with FCP & hard drive camcorders with no tapes specifically the JVC Everio’s?
    I have always been a miniDV user so this is all new…. however I was able to help a friend get his hard drive camcorder setup after having to get a converter online. I am just a little reluctant to invest in a camcorder when I don’t know if it will work or not.
    Thanks for your help all!

    Have you searched this forum for info on these (JVC Everio model) cameras yet? Interesting reading...with some relevent workflows.
    http://discussions.apple.com/search.jspa?threadID=&q=%22JVC+Everio%22&objID=f939 &dateRange=thisyear&userID=&numResults=15&rankBy=10001
    And you're right...it's best to know what you're in for, prior to purchasing.
    K

  • Looking to buy a regular definition hard drive camcorder to use with FCP 2

    Hey all, thanks for clicking my posting. Here's the deal, I am in the market for a hard drive camcorder for use with Final Cut Pro. Will be recording sports and sports-related material (but obviously want to use it for other things as well down the road). I am using an older 1.6 Ghz tower from about 5 years ago, but am using the latest OS 10.5.7. Am looking to spend about $500, but can go up a bit if needed. Since I am using an older Mac I know that I cannot use a high def cam with it, and and this point it's not needed for what I am doing.
    Was looking at the Panasonic, Sony and JVC Everio lines. I had made up my mind to grab the JVC since it has the best reviews of any of the mid priced cams out there, but was sharply warned by my Apple teacher (and 2 others there at the time) not to buy it since the .mod file format doesn't play nice with Final Cut Pro. I was going to Streamclip it into .dv but was told that I will lose quality and quite possibly audio sync. After a bit of checking around the web I found that there is an analog output of the Everio camera that I could put into my Canopus ADVC - 55 and then capture it with Final Cut Pro (the only question I have is, should I go from digital, through an analog output, only to capture it with a digital format again? Seems to me I should not go digital-analog-digital).
    So let's get to the question here then, can somebody more knowledgeable than myself tell me which cameras to look at to do the job? I guess my backup cam would be the Sony SR-47, decent reviews but not as good as the Everio. Also, are there any cameras in that price range that will simply let me pull the footage right into the bin of Final Cut Pro, or do they all have to be converted from MPEG 2 into .dv (or whatever file format I want them in). I know this is a lot of questions, but I am sure there's some cameras that I might be missing, so anybody care to help me out? Thanks in advance!
    Tom

    As far as I know, that is the only list of compatible drives with the router.  So, yes, that is the list I am referring to when I said "compatible drive list".   There are very few 2TB or 3TB drives on the list.  I would really like to be able to use a 3TB drive with a couple partitions, and that seems almost impossible with very few options.  I have been reading around the last couple days and I hear lots of reports of people successfully using drives that are not on the tested compatible list.  I just wanted to know more options from people like that.  

  • Solutions for using jvc's new hard drive video cam

    does anyone have any experience using jvc's new hard drive video camera (GZ-MG50U) with usb in puts on OS 10.3.9? any suggestions on software soltuions to edit captured video?

    Just to give you a quick run down on what MPEG-2 is... it is a highly compressed format, meaning that the moment your footage was saved as an MPEG-2 file, information was thrown away. That's what compressors do, throw away redundant information such as color information. So technically, the image in MPEG-2 is not as good as if it were captured in DV... on the flipside of that, converting that DV footage into MPEG-2 would reduce the quality of the DV footage, so technically, you would be even at this point.
    Where things get ugly is when you take that compressed footage and convert it into another format for editing. This process is lossless, but the file size bloats immensely in the process. Which means when you take that converted and edited footage and run it through the compressor again to convert it back into MPEG-2 so that you can burn it onto a DVD, it has lost still more information than the original footage that you shot. If you take any footage and run it through a compressor several times, it's like re-recording over the same VHS tape... each recompression reduces quality.
    This is why you don't want a device to goes directly to MPEG-2, whether it be directly to a DVD disc or a hard drive. DV and HDV are both editable formats... yes you have to capture the footage and then convert it to MPEG-2, but you also have the opportunity to edit it along the way. Cameras that go straight to MPEG-2 assume that you don't intend to edit anything, just burn it to a disc and call it good... sort of like owning a disposable camera... you're buying the convenience of not having to do anything with it.

  • Import photos without copying? I Have thousands of photos on a hard drive separate from my mac and i dont have enough space on my mac to copy them to. Any way to import without copying to the local hard drive?

    Import photos without copying? I Have thousands of photos on a hard drive separate from my mac and i dont have enough space on my mac to copy them to. Any way to import without copying to the local hard drive?

    Yes, but you might want to think carefully about it.
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing. The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
    This is an attractive option for some users at face value, but it contains a significant number of issues that you might want to consider before making the decision to run a Referenced Library
    How to do it:
    iPhoto -> Preferences -> Advanced and uncheck the box at 'Copy items to the iPhoto Library'
    Now when you import iPhoto makes an alias in the Library Package that points to the stored file. Note: iPhoto still creates a thumbnail of the image and it makes a Preview of edited photos inside the Library Package.
    Issues?
    1. You are responsible for file management. That's more work:
    You must first move the files from your camera to the storage location before importing.
    If you want to delete files then you must first trash them from iPhoto and then afterwards find them in your storage and trash them.
    Thereafter, you cannot move the files on early versions of iPhoto at all, on iPhoto 08 and later you may move them on the same Volume or Disk. If you move them to a new volume or disk the aliases my break. If they are on an different volume and you move them the aliases will break.
    You cannot rename the files.
    Migrating: moving to a new machine, moving the files to another disk are all a lot more complex.
    2. You gain no extra functionality from running a Referenced Library. Nothing. This is just storage. You still manage the files via iPhoto. You edit them with iPhoto or via iPhoto's External Editor setting, otherwise you're changes will not be available in iPhoto. You don't save  byte of storage space.
    3.  If you have the Library on one volume and the photos on another you if anything changes in the path to a file (Like if you upgrade your machine, move the files on the NAS or on to another one?) then the alias will break, and you'll have to repair it manually. For every photo in the Library. One at a time.
    Why do you want to run a Referenced Library?
    Because my photos won't fit on my HD?
    You can run a Managed library from an external disk. Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    You're worried about accessing the files?
    There are many, many ways to access your files in iPhoto:   You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    There's a similar option in Outlook and many, many other apps.  If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    If you want to access the files with iPhoto not running:
    For users of 10.6 and later:  You can download a free Services component from MacOSXAutomation  which will give you access to the iPhoto Library from your Services Menu.
    Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    Show File:  a. On iPhoto 09 and earlier:  Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.    3.b.
    b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Maybe you are looking for