Import process does not complete

When loading photos everything seems OK until the last photo shows being uploaded. Then the "Finishing Upload" bar never shows completion of the upload process. However, the window with two buttons (keep photos in camera or erase photos in camera) is present and operable. I can wait forever - hours for the progress bar about finishing upload to disappear indicating completion of this process but the bar just remains on the screen. I then click on the keep the photos and the process seems to complete normally. I then can edit the event just loaded, all pictures are in the event and each can be edited. The event just imported shows up in the 'all events". Then when I close iPhoto09 and later launch the application, that latest event is nowhere to be found. Last import is a blank screen. Selection of 'all events' shows all previous events but the one just imported is not there.
Then to see if it was a hardware problem with the card reader or the CF card itself, I imported them successfully on a Macbook with no problem and they were there upon and close and re-launch of the application iPhoto08.
I believe the problem lies in the fact that I never get a completion signal of the import process, but I don't have any idea of how to overcome this. All other features seem to work fine i.e. other events are available for viewing or further editing, all pictures seem available. Any ideas.
Thanks for any help.
Mike Hanrahan

Terence,
Thanks for the help, I created a new library as you suggested and successfully uploaded photos with no problem. So far so good. When I first started using iPhoto when the computer was new, the library was located on my hard drive in the pictures folder. Some time later I added two additional external drives or I guess the term is volumes. Drive 1 is for the time machine automatic backups and Drive 2 was added later and is dedicated for my iphoto library exclusively. At the time I added Drive 2 I moved (or maybe it was copying I'm not sure) all my photos from the internal drive to the external Disc2. So now I have three photo libraries.
1) The original library on the internal HD with my early photos
MacHD/Home/MP Navigator EX/Pictures/IPhoto Library
where the 'MP Navigator EX' came from I have no idea
2) Disc 2 library with all photos and which is apparently associated with the import problem.
Disc2/Pictures/IPhoto Library
3) The newly created library on the internal HD
MacHD/Home/Pictures/iPhoto Library
So when I followed your option 1, rebuilding the iPhoto Library Database , the computer just rebuilt library 3 above - the one just created with a few test pictures.
I now have three questions:
1) How do I direct/select the rebuilding of library 2 above? ( I assume that is what I should do)
2) Once this problem is fixed, how do I tell iPhoto upon launch which Library to use?
3) Once the drive2 library is rebuilt, is the rebuilding process one that generates any new
libraries or other files that I need to be concerned about?
With your additional help, I think my problem will be resolved.
Thanks so much.
Mike

Similar Messages

When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD

Syncing process does not complete

I have 2 iphone 5S models that go through the entire sync process but the sync does not complete. Gets to the last step, "waiting for changes to be applied" and then the sync stops.

What step would that be - for photo transfer?

Workflow process does not complete for 3500 but works for about 10 records

Hi Gurus,
I am a novice in workflow. Pls bear if the questions are very basic.
We have a old custom workflow process which is inistaed by a PL/SQL procedure
WF_ENGINE.CreateProcess ---
WF_ENGINE.StartProcess ---
COMMIT; ---
Now this process has run for over 6-7 years but has always processed max upto 8 or 10 records at a time. Now we had about 4000 records in a table and the process was running for more than 4 days now and it has been termiinated.
I could not see any new item_keys. Is it because we have a commit only at the end.
This process has 3 sub processes. they are connected by 'AND' and then we have an 'End' node.
The first sub-process is simple and we can see a record in wf_items .
Howver no records are there in wf_items for the 2nd and 3rd sub processes.
How can we check the point where it has hanged. Querying Status monitor just gives the first sub-process that has completed. How to debug for these cases.
This has always worked for small volumes. Now we have about 4000 records and we face this problem
The process actually checks data from the table and based on some conditions , it send 5 different notifications to 5 different mail groups. So we expect about 4000*5 mails to be sent.
Any help is welcome.
Thanks,
L
Edited by: 901929 on 20-Jul-2012 01:38
Edited by: 901929 on 20-Jul-2012 01:39

L,
Please check the following:
1. Since this is pure PLSQL you can have a SQL script where you enable a database event to get a trace and then run tkprof on the output to spot any performance problem. You can use something like:
alter session set tracefile_identifier='Background' max_dump_file_size='unlimited' events '10046 trace name context forever, level 12';
begin
wf_engine.CreateProcess(...);
wf_engine.StartProcess(...);
end;
commit;
alter session set events '10046 trace name context off';
select fnd_debug_util.get_trace_file_name() tracefile from dual;
2. Do you happen to know if WF runtime tables are being purged regularly? If this is not done you can expect serious performance problems. If this is WF Apps embedded you need to clean data using the concurrent request Purge Obsolete Workflow runtime data, if not then you can use the APIs in package WF_PURGE.
3. You will only find one record in WF_ITEMS for this process if those sub-processes belong to the same item type
4. About the notifications, make sure you are not running into this design problem: https://blogs.oracle.com/oracleworkflow/entry/looping_within_a_workflow_process
Regards,
Alejandro

Disk Utility - secure erase process does not complete

Help, please!
It is taking "for ever" for Disk Utility* to securely** erase (a) the 37.25 GB hard drive in my G4 Powerbook (while booted from a startup disk), and (b) an external 55.9 GB firewire hard drive (connected to a 17" G4 iMac).
After more than a day, the progress bar for the Powerbook is only about half way over, and the progress bar for the external hard drive is only about 1/7 of the way over. (See the notes marked * and ** below.)
Additionally, the note next to the progress bar for the Powerbook has changed from "Writing random data to disk" to "Creating partition map".
Yesterday when I tried this process previously, after a very similar situation developed I quit Disk Utility on both machines and started the process again - so now the situation is about the same as before I quit Disk Utility yesterday.
* I am using Disk Utility v10.4.4 to erase the external drive. I am using Disk Utility off the boot disk for OS X v 10.3.3 for an iBook to erase the Powerbook - but I can't see what version at the moment because the pointer is currently a spinning "beach ball".
**By "securely erase", I mean I selected the option to write random data eight times to each location.
(Prior to starting the secure erasure process, I had Disk Utility write zeroes at all locations - and that process did completed within a few minutes for each hard drives.)

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro

Sync does not complete completing

Hi syncing between my pc and iphone 3g is not completing sticking on back up routine.
Yesterday 21st April I had problems syncing taking a long time (approx 10 mins) to complete. Last night 21st I could sync I had to restore - this competed successfully. Now the sync process does not complete sticking around 70% of the backing process...when I cancel syncing by using the slider on the iphone, itunes seems to then suyn contacts/ bookmarks etc.
Anyone got any ideas
I have had my iphone 3G for over a year now and had my new lap top for over 7 months (windows 7)
I am on the latest version of itunes and iphone os.
Stuart

This is more likely a computer or iTunes problem, not an iPad problem.

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Process does not follow the routing ends up in complete status

Installed Adobe LiveCycle server ES 2.5 with SQL Server 2008 as database
And followed the tutorial ‘Create Your First LiveCycle Application’
Deployed it on the server when I test the same
i.e. when the workspace user fills in form details and hits complete button it ends up as status complete
And not assigned to next user in the route
The process does not follow the routing it ends up in complete status
And nothing shows up when trying to record and play back the process
Tried invoking Via workbench too
no errors in the server log
Could this be an installation issue any pointers appreciated
Please advise

Issue with Jboss as it was taking longtime time to start due to low CPU ideally it should not take more than 3 to 5 minutes
Process works now

Import app to svn when run app package weblogic.xml.process does not exist

Hi,
i am versioning my adf application to a server with subversion, the initial import of the application works ok, but when i tried to run it, it does not found all weblogic classes.....
Error(16,28): package weblogic.xml.process does not exist
Error(6,25): package weblogic.security does not exist
Error(8,34): package weblogic.security.services does not exist
Error(9,33): package weblogic.servlet.security does not exist
Error(39,36): cannot find class SimpleCallbackHandler
Error(41,26): cannot find variable Authentication
Error(42,6): cannot find variable ServletAuthentication
any ideas??
thanks.

Hi,
i am versioning my adf application to a server with subversion, the initial import of the application works ok, but when i tried to run it, it does not found all weblogic classes.....
Error(16,28): package weblogic.xml.process does not exist
Error(6,25): package weblogic.security does not exist
Error(8,34): package weblogic.security.services does not exist
Error(9,33): package weblogic.servlet.security does not exist
Error(39,36): cannot find class SimpleCallbackHandler
Error(41,26): cannot find variable Authentication
Error(42,6): cannot find variable ServletAuthentication
any ideas??
thanks.

Does not complete processing of "Home" of the Creative Cloud desktop application

Someone know the way to fix the following issue?
After installed some Creative Cloud Software, I had uninstalled Adobe application manager manually and installed Creative Cloud desktop application manually. because automatic upgrade of creative cloud desktop application from adobe application manager does not work.
The creative cloud desktop application setup had been completed successfully. but, seems that it does not complete processing of displaying the history if I chose "Home". The progress Icon will stay in continuity. And any contents does not show on it.
Regards,

I'm posting this in a few threads to try to catch everyone having the problem.
The good news is that I found a way to fix this.
The bad news is that it involves uninstalling everything. (Note that reinstalling over the old installs won't cover it, I'd tried that one once too. You'll have to fully uninstall each program before redownloading/reinstalling.)
I spent many hours with tech support yesterday running through options unsuccessfully, and can very thoroughly assure you that uninstalling the desktop app, renaming any number of folders, and new user accounts all will not help you. From doing a lot of research on various similar problems, it appears that it's possible for this to spontaneously resolve within a couple of hours. If it doesn't, though, you're stuck with fixing it yourself.
The best theory I found was that it's caused by updating or installing a program without doing it through CC. If you've downloaded an installer and run that or clicked "Check for updates" in the help menu inside one of the other apps, this is you. Other people have noted that if you know which app you did this with, you can uninstall that one to fix it. If you have no idea, the simplest path is to just uninstall everything. You can try doing things one at a time, but you'll need to reboot every time the uninstaller tell you to do so and then see if it's fixed. (Personally, I got sick of that by the second time through.) I do remember clicking "Check for updates" right around the time this started for me, but I don't know which program it was in, just that I knew it would trigger the updates I knew existed but CC wasn't acknowledging.
I will also note that once I had everything uninstalled, I ran the Cleaner Tool and did a "Clean All". If you're going to or need to do that, make sure you've backed up all of your preferences, customizations, plugins, and so forth as needed.

Integration Process does not start

Hi guru's
My scenario is this. From ECC we send Idocs to PI. We have an integration process to receive the idocs because only max 9999 are passed in the port.
We run just around 11000 CREMAS idocs now.
The problem is that the integration process does not start on our QA environment while it does start on DEV environment.
I've run many checks on both environments and they all look the same.
To name a few:
* Cache are all green and up-to-date.
* I checked the WF models which are behind the Integration Process and they are the same.
* Event correlation is correct in both environments
* When i test the idocs are correctly sent from ECC to PI.
However on DEV I see in transaction SXMB_MONI_BPE i see that the integration process is triggered and started. It waits 10 minutes and collects any messages that come in, and then bundles these and sends them on to the receiver.
On QA i do not see the Integration Process being started. Only records i see in SXMB_MONI_BPE are three work items, 2 completed, 1 ready, all 3 are called waiting for event.
I'm probably missing some configuration somewhere but what could it be?
Regards
Robert

Hi Eng Swee,
Thx. I checked it already and it works fine.
Meanwhile i did do some changes and some retests and now i saw somewhere that all my tests were creating more steps in an already started integration process, that was still waiting.
I now cleared some old workitems and started afresh.
What i see now is:
1) the BPM process start correctly
2) it receives 1 or 2 or 3 or n messages
3) it then waits for the deadline to finish, i.e. it should run for 10 minutes and then proceed to the next step which is sending the collected idocs to receiver.
On DEV the deadline works fine. On QA it doesn't.
IN SWU3 i have done the customizing and it shows green, so that part is OK.
Still the deadline is passed and it doesn't have the desired effect on mu BPM process (workflow).
Are there any other checks i can do to see if the deadline mechanism is properly working?
Is there a maybe a manual step i can do to trigger the deadline? Then at least i get some information on where the real problem is.
(Sorry for earlier confusion but i hadnt realized that there was still a process running)
Regards
Robert

BPE_adapter The process does not support the given synchronous interface

We are using PI 7.0 Sp 14 .
Old dev box needed to be upgrade with 64 bit hardware. We did a fresh installation and done all the technical configuraiton. Imported SLD , IR,ID , Runtime value mapping . All scenario working fine after migration except one particular scenari which involves SOAP Web service .
Our scenario is Extern system send SOAP call to PI - BPM_SYNC_ASYnc_process --> BPM Proxy_send
this BPM proxy_send to ECC R/eceiver at R/3
We are getting the following error after migraiton. Please help
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
Error! Hyperlink reference not valid. <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Is there any other Configuration to be done at the Abap side part from BPE_XI_customising (Automatic customising) done as part of the post installation steps .
Wondering any other configuration needs to be done at the ABAP side (as BPE is running on the ABAp stack) to resolve this.
Thanks

Data streaming between server and client does not complete

Using an ad-hoc app, data streaming between server
and client does not complete as it supposed to be.
The process runs well in solaris 5.8, however under 5.9
we have found the characters stream buffer length limitation
is around 900 to 950 characters (by default we are using 3072
characters).
Example:
- We are transfering HTML file, which will be displayed
in the App client, with buffer=3072, the HTML only displayed / transfered
as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
in this case, the only problem that we have is the file transfer will
eventually longer than usual.
- There is another case, where we have to transfer information (data) as stream
to the client. A long data stream will not appear at all in the client.
Any ideas why the change between 5.8 and 5.9 woudl cause problems?
The current app-driver that we are using is compiled using Solaris 5.6,
if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
Thanks
Paul

Does this have anything to do with Java RMI? or with Java come to think of it?

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

Import process does not complete

Similar Messages

Maybe you are looking for