Import Process Server

Hello,
I'm capturing Beta Cam tapes via Black Magic, it creates an AVI file, to a GLYPH hard drive; I'm working off the Glyph. After a minute of plyaback Adobe Premiere CS4 crashes and explains that there is an Import Process Server crash. This only happens with the AVI's imported via the deck; I have a lot of SxS shot footage, BPAV files, and they work just fine.
Many Thanks,
Tim S.

Bill,
The Glyph is connected via USB 2.0, however it's connected to my PC, to act as a partition, and not connected to my BetaCam deck. (Basically I was capturing via Black Magic and saving the AVI to the Glyph; it didn't seem to like that for whatever reason).
Thanks,
Tim S.

Similar Messages

Import Process Server has encountered a problem and needs to close

Hello,
Loaded an AVI-from the desktop, as that is where my project file and scratch disk go, about 7.5 GB's, and when I scroll through it or try to render, I get this little message:Import Process Server has encountered a problem and needs to close
Windows XP Pro/ 64 Edition
Dell Precision T7500
Intell(R)Xeon(R) CPU
E5520 @ 2.27 GHz
2.26 GHz, 12.0 GB of RAM
Thanks so much in advance,
Tim S.

Jim,
Thanks for all your help. Sure enough, an MOV file works just fine and I may have tracked down the problem: the video, I'm sure caused from the source tape, lags towards the end-it seemed like every time I scrolled towards the end of the AVI it would crash. Still seems mighty peculiar that it would crash the system each time.
Thanks,
Tim S.

CS4 Premiere: Can't open due to inaccessible to Importer Process Server

CS4 Premiere: Can't open due to inaccessible to Importer Process Server:
Dear Guru:
After subject:
I uninstalled it;
Re-installed it;
Reopen it,
No luck, same error message ...
A friend's wedding reflash is set on 12/22, I have yet to open my Premiere?!!! Heeelp... Please...
Appreciate !
Forest

Hi, Jeff:
My system is XP; before the premiere worked well.
More detail story: Premiere could not open 3 days ago, no fix, some one sent me a crack software, I used it, no luck. Another nice guy told that is for non-legal Premiere, surely it won't work.
I tried to remove Premirere; difficult; some one suggested me to use Adobe CS4 cleaner from Adobe. Then it was removed. I re-install Premiere; During the process, abnomal thing I remember was: I can't input product S/N, so I had to use 30-day trial.
During the installation, it was stopped by Windows Installer issue, I restarted Windows Installer, then the process continued...
I have two log files, don't know how to attach into this message. But, can't find any problem therein.
Heverever, when I tried to open newly installed Premiere, error message says: ---can't open, reason is exactly same with very beginning: Can't communicate with Inporter Process Server....
Appreciate!
Forest
<Removed by Moderator>

Importer process server.exe has stopped working

once i want to capture a long video, and when close premier pro this appear importer process server. exe has stopped working i really need help to fix it!!!

We need help too to help you.
Some suggestions... and answer at least the 16 questions at the end of the Wiki article.

Importer Process Server.exe error

I'm using the CS4 version offered in Premier Pro CS5 when your computer isn't capable of handling 64 bit software. I cannot change to Windows Vista or Windows 7 because my computer is part of a network at my office and we are still using Window XP (even though my computer is new and could easily handle 64 bit software).
I'm having a problem with an Importer Process Server.exe error. When I try to import audio clips that I've created in Soundbooth (they are set up as .wav files), everything seems to go fine at first. However, about the time I am trying to import the 3rd clip (and I have 22 I need to import into the video), I get the Importer Process Server.exe error and the system completely shuts down. This is really frustrating, because this is the last step before I will be finished with the video.
I can't seem to find anything in the Help menu that fits my problem.
Does anyone have any suggestions?

OK, thanks. I already have full admin rights, so that wasn't the problem.
As it turns out, it seems that the software was simply taking a long time to finish loading all of the clips even though a popup message stated that is was finished downloading (importing) the audio clips. After trying several times to reboot the software and having the same problem, I reloaded one last time and was interrupted and had to walk away for about 10 minutes for a quick meeting. When I came back, everything worked fine. The only thing I can figure out is that behind the scenes, the system was still loading the clips even after it had told me it was finished. At some point during the 10 minutes I was away, it apparently finished the download of all clips. Time was the only difference between the unsuccessful attempts and success.
I'm now in the process of converting the video to a flash format. If all goes well with that, my first video project will actually be completed.
Thanks again for all of your help and suggestions.
This software is great as long as you can figure out the little quirks it seems to have, and it's nice to have some people out there that you can go to for answers.

PremierePro CS4 Importer Process Server Error

Hi all,
I get this error message each time I start Adobe Premiere Pro CS4:
"Communication error between PremierePro and "Importer Process Server". Try to restart your system."
I start to get this error when I updated Windows Xp Pro x86 from the Service Pack 2 to SP3. With the previous version Premiere worked just fine. I tried to restart the system but the error is always there. Googling around I read that maybe I need to reinstall only Premiere, but I work in a private TV and I don't have much time to uninstall/reinstall the software. I added Premiere and all the others Master Collection softwares' to the Windows Firewall/Avast exceptions, without any results. I know that CS4 works very well with Vista and 7 (I use it on my home PC with Windows Vista x64), but here I can't change OS or upgrade to the CS5 (because it's x64).
Anyone know how can I solve this problem?
Thanks in advance.

you might have a "restore" point saved ..( system restore ) that is a date before you installed the sp3 upgrade. See if you can use that and get it back to working OK
otherwise, maybe try to uninstall all cs4 stuff, use the clean tools as described in the forums, defrag your program Hard drive, and reinstall cs4 stuff...

Importer Process Server

This is so frustrating. I have done a search for this but none of the posts were helpful as per this:
The issue is that there is not even an event log for this crash. Yes I have restarted the computer to no avail.
The only solution I have found to to re-install the software, but it will only work until I import files, and this will happen the next time I open the app. I can even open the original files where I imported files before, work on it, save it, export it. I can open as many previously created files that I want, as long as I do not import any files. Don't matter where I import them from, could be a DVD, my hard drive or my camera. This is incredibly frustrating.
Anyways, I have PPCS4 (all updates), Vista Ultimate (all updates), Asus P5K Mobo, 8Gb RAM, 5 Hard Drives, Adobe Master Collection CS4 (all updates). All my other applications work fine, have tons of free space, no crap on the system.
Help!

Does this help:
11/13/2010 01:34:14 PM;Adobe Premiere Pro Startup Error;C:\Windows\syswow64\USER32.dll;Multi-User Windows USER API Client DLL;C:\Program Files (x86)\Adobe\Adobe Premiere Pro CS4\Adobe Premiere Pro.exe;Adobe Premiere Pro CS4;Adobe Premiere Pro was unable to communicate with the process "ImporterProcessServer." Restarting your computer may fix this problem. ;Bart;
11/13/2010 01:47:28 PM;Adobe Premiere Pro Startup Error;C:\Windows\syswow64\USER32.dll;Multi-User Windows USER API Client DLL;C:\Program Files (x86)\Adobe\Adobe Premiere Pro CS4\Adobe Premiere Pro.exe;Adobe Premiere Pro CS4;Adobe Premiere Pro was unable to communicate with the process "ImporterProcessServer." Restarting your computer may fix this problem. ;Bart;
11/13/2010 01:54:45 PM;Adobe Premiere Pro Startup Error;C:\Windows\syswow64\USER32.dll;Multi-User Windows USER API Client DLL;C:\Program Files (x86)\Adobe\Adobe Premiere Pro CS4\Adobe Premiere Pro.exe;Adobe Premiere Pro CS4;Adobe Premiere Pro was unable to communicate with the process "ImporterProcessServer." Restarting your computer may fix this problem. ;Bart;
11/13/2010 02:23:20 PM;Adobe Premiere Pro Startup Error;C:\Windows\syswow64\USER32.dll;Multi-User Windows USER API Client DLL;C:\Program Files (x86)\Adobe\Adobe Premiere Pro CS4\Adobe Premiere Pro.exe;Adobe Premiere Pro CS4;Adobe Premiere Pro was unable to communicate with the process "ImporterProcessServer." Restarting your computer may fix this problem. ;Bart;
11/14/2010 08:25:26 AM;Adobe Premiere Pro Startup Error;C:\Windows\syswow64\USER32.dll;Multi-User Windows USER API Client DLL;C:\Program Files (x86)\Adobe\Adobe Premiere Pro CS4\Adobe Premiere Pro.exe;Adobe Premiere Pro CS4;Adobe Premiere Pro was unable to communicate with the process "ImporterProcessServer." Restarting your computer may fix this problem. ;Bart;
11/14/2010 05:39:05 PM;Adobe Premiere Pro Startup Error;C:\Windows\syswow64\USER32.dll;Multi-User Windows USER API Client DLL;C:\Program Files (x86)\Adobe\Adobe Premiere Pro CS4\Adobe Premiere Pro.exe;Adobe Premiere Pro CS4;Adobe Premiere Pro was unable to communicate with the process "ImporterProcessServer." Restarting your computer may fix this problem. ;Administrator;

Upgrading Stellent 7.5 to OCS 10gR3 Import Process failing HELP NEEDED

Hi,
I am upgrading Stellent 7.5 to Oracle COntent Server 10gR3. Here is what I have done.
1. Migrated all the configuration from Stellent to 10gR3
2. Migrated the Folders from Stellent to 10gR3
3. Migrated the content by creating an Archive and then importing the Archive in 10gR3.
I am seeing lot of errors in the log file. Following are the errors I see in the log file.
1.
Could not send mail message from (null) with subject line: Content Release Notification. Could not get I/O for connection to: hpmail.rtp.ppdi.com java.net.ConnectException: Connection timed out
2.
Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_000025'. Virtual folder does not exist.
3.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004118' was not successfully checked in. The primary file does not exist.
4.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004213' was not successfully checked in. IOException (System Error: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227 (No such file or directory)) java.io.FileNotFoundException: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227
5.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_031414' with revision label '2' was not successfully checked in. The release date (11/4/08 9:12 AM) of the new revision is not later than the release date (11/4/08 9:12 AM) of the latest revision in the system.
6.
Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_033551'. Item with name '07-0040_IC_Olive-View_UCLA_ERI_Cellulitis_2008-08-26.pdf' already exists in folder '/Contribution Folders/2007/07-0040/07-0040Site_Specific_Documents/07-0040Olive_View_UCLA_Medical_Center/07-0040Archive/07-0040Essential_Documents_ARC/07-0040Informed_Consent_ARC/'.
7.
Import error for archive 'ProductionContent' in collection 'prod_idc': Aborting. Too many errors.
QUESTIONS:
Is there a way to keep the import processing running even if the errors are coming. As it looks like when there are too many errors the import process stops in the middle.
How do I find out the total number of folders and the documents. As I want to run the same query on Stellent 7.5 and find out total number of folders and the documents and then run the same query on 10gR3 and compare the results. Just want to fnd out how much content is imported.
How do I run the import process over again as half of the content is imported and my import process failed in the middle when running the process over again what settings do I need to provide to make sure no duplicates get created etc.
Any help is really appreciated.
Thanks

Hi
There are a couple of ways to get around the issues that you are facing such that import process is not interrupted because of these. They are as follows :
1. Use ArchiveReplicationException component . This will keep the import process running and make a log of the failed process which can be used for assessing / gauging the success of the import and what all needs to be redone.
I would suggest this as the option for your case.
2. Put the config variable for arciver exception to 9999 so that the archive process stops only after hitting the limit of 9999 errors.
I would suggest to go for step 1 as that would be a much more foolproof and methodical way of knowing what all items have failed during import.
Thanks
Srinath

Query on long running client import process

Hi Gurus,
I have few queries regarding the parameter PHYS_MEMSIZE. Let me brief about the SAP server configuration before I get into the actual problem.
We are running on ECC 6.0 on windows 2003, SP2 - 64 bit and DB is SQL 2005 with 16GB RAM and page file configured 22 GB.
As per the Zero Administration Memory management I have learnt as a rule of thumb, use SAP/DB = 70/30 and set the parameter PHYS_MEMSIZE to approximately 70% of the installed main memory. Please suggest should I change the parameter as described in zero administration memory guide? If so what are the precautions we should take care for changing memory parameters. Are there any major dependencies and known issues associated to this parameter?
Current PHYS_MEMSIZE parameter set to 512 MB.
Few days ago we had to perform the client copy using EXPORT / IMPORT method. Export process was normal and went well However the import process took almost 15 HRs to complete. Any clues what could be the possible reasons for long running client copy activity in SQL environment. I am suspecting the parameter PHY_MEMSIZE was configured to 512 MB which appears to be very low.
Please share your ideas and suggestions on this incase if anyone have ever experienced this sort of issue because we are going to perform a client copy again in next 10 days so i really need your inputs on this.
Thanks & Regards,
Vinod
Edited by: vinod kumar on Dec 5, 2009 9:24 AM

Hi Nagendra,
Thanks for your quick response.
Our production environment is running on ACtive/Active clustering like One central Instance and Dialog Instance. Database size is 116 GB with 1 data file and log file is 4.5 Gb which are shared in cluster.
As suggested by you if I need to modify the PHYS_MEMSIZE to 11 or 12 GB(70% of physical RAM). What are the precautions should I consider and I see there are many dependencies associated with this parameter as per the documentation of this parameter.
The standard values of the following parameters are calculated
According to PHYS_MEMSIZE
em/initial_size_MB = PHYS_MEMSIZE (extension by PHYS_MEMSIZE / 2)
rdisp/ROLL_SHM
rdisp/ROLL_MAXFS
rdisp/PG_SHM
rdisp/PG_MAXFS
Should I make the changes to both Central and dialog instance as well. Please clarify me,. Also are there any other parameters should i enhance or adjust to speedup the client copy process.
Many Thanks...
Thanks & Regards,
Vinod

Separate Distribution Monitor Export and Import Processes on Multiple Machines

Hi,
Would you kindly let me know whether it is possible (means officially supported way) to run Distribution Monitor Export and Import processes on different machines?
As per SAP note 0001595840 "Using DISTMON and MIGMON on source and target systems", it says as below.
> 1. DISTMON expects the export and import to be carried out on the same server
I think it means that export and import processes for the same tables must be run on the same machine, is it correct? If yes, Export on the machine A, and then Import those exported data on the other machine B is not the officially supported way... (However, I know it is technically possible.)
Kind regards,
Yutaka

Hi Yutaka,
Point no. 2 & 3 clarify the confusion. However let me explain it briefly:
Distribution Monitor is used basically in case of migration of large SAP systems (database). It provides the feature to increase parallelism of export and import, distributing the process across available systems.
You have to prepare the system for using DistMon. A common directory needs to be created as"commDir" and in case you use multiple systems for executing more number of processes of export and import then that "commDir" should be shared across all those systems. And this is what the Point no.1 in KBA 1595840 mentions about. Distribution Monitor will run both the export and import process from the machine which is prepared for using DistMon and DistMon itself will control the other processes i.e. MigMon. No need to start separate MigMon.
For example: You are performing a migration of SAP system based on OS:AIX and DB:DB2 to OS: HP-UX and DB: Oracle. You need to perform the export using DistMon and you are having 4 Windows servers which can be used for parallel export/import. Once you have prepared the system for DistMon which hosts the "commDir" you'll have to provide the information of involved host machines in the "distribution_monitor_cmd.properties" file. Now when DistMon is executed it will distribute the export and import process across the systems which were defined in "distribution_monitor_cmd.properties" file automatically.
Best regards,
SUJIT

Getting 'java.lang.OutOfMemoryError' while importing process flows.

Hello,
We are getting 'java.lang.OutOfMemoryError' error while importing process flows in our QA environment. This environment is not new. The same process flows were working perfectly fine till last week.
This week we had to delete the project in QA and reimport all the objects. Import went fine for all, except process flows. We could deploy all other objects as well.
We have tried increasing JVM in run_service.sh and owbclient.sh files by increasing -Xmx, -Xmx and Dlimit. We increased as far as 2048M ( This is the max memory available on our server)
We are using OWB version 10.2.0.2 and Oracle 10G over Linux. Did anyone of you face the same issue ? Please le us know the solution.
Thanks
Madhavi

Hi Madhavi,
Which locale language is shown in your OWB client configuration? We had this issue in previous versions (I haven't found it in this version, but I'm used to work with English since these previous versions) So we always adjust Preferences (Tools -> Preferences...) to see Appearance -> Locale -> English.
Try to change the locale language if it's your case.
Regards
ANA GH

Comparision of Oracle upgrade(9i to 10g) and export/import process

Hi Friends,
I have a schema in Oracle 9i Database and i would like to have it in Oracle 10g.
I ned to know what will be the advantages and disavantages between the Oracle upgrade(9i and 10g) and export/import (9i export and 10g import)process?
Please suggest.
Regards

Please go this link for new features of 10g:
[http://www.oracle.com/technology/pub/articles/10gdba/index.html]
For export and import go to this link:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm
Regards
Asif Kabir

Import not responding after completing the import process

Hi All,
This is the problem i am facing:
1. Imp utility is not terminated after the import process is done. Had to manually terminate the process with ctrl+c or ctrl+break.
2. Log Files are not generated properly. Log file are created and updated partially.
3. Although database is effected with all the changes there in the dump file, it is not being shown on the screen (and hence log is not appended).
4. When using SHOW=Y parameter, Imp process is terminated successfully with success/warning/error messages and log files are generated properly.
I have checked in the database: although the results are not shown on the screen ( or log not getting generated), the db is effected with all changes in the dump file up to last line.
5. Commands I have fired:
imp [email protected] file='Y:\IDW Analysis for Initial Load\IDW Data\isdshrd_temp\GROUP_DIM.dmp' log=c:\ImpLogs\ACCESS_GROUP_DIM.log fromuser=GEAM_DIM touser=kanchk
imp [email protected] file='Y:\IDW Analysis for Initial Load\IDW Data\ACCOUNTING_BASIS_DIM.dmp' log=c:\ImpLogs\ACCOUNTING_BASIS_DIM.log fromuser=GEAM_DIM touser=kanchk show=y
Please respond asap
Thanks,
Kishore

As an experiment, can you try to import the same on the database server itself. This will help us to understand is it network issue or something else.
Wait Event Description
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96536/apa5.htm#970961

In import process,how excise base value is calculated in MIGO

Hi expert's,
In import process,how excise base value is calculated in MIGO,with what referance values get add to base value.
waiting for your valuable response,
Regards
V.raj

hi,
we Tried with your following reply ! but still not finding exact value in base value .
(MATERIAL PRICE* QTY IN MIGO * EXCHANGE RATE)
thanks & regards
V.Raj

Handling rejections in the Payable's Supplier Open Interface Import Process

I’m using the suppliers API to mass load the suppliers. I’m loading the tables AP_SUPPLIERS_INT, AP_SUPPLIER_SITES_INT and AP_SUP_SITE_CONTACT_INT by part; first the AP_SUPPLIERS_INT and then the other two tables. Due to various errors I get some rejections on the first table. If I want to correct the data on the interface tables, what should I do (on the rejected records that I want to correct)? (a)Should I correct the data and leave the STATUS and REJECTION_CODE as the API left them and re-run the Open Interface Import process? (b)Should I delete the contents of those fields? (c)Should I delete the entire table?
I tried option (a) but the process seemed to take forever compared to the first time I ran it and I canceled the request.
Thanks in advance.

Hi,
Unhide the Debug (Debug Switch) parameter of the Report, Supplier Open Interface Import and run the program with Debug flag as Yes.
Please post the log to help us understand the issue.
Regards,
Sridhar

Import Process Server

Similar Messages

Maybe you are looking for