Import proper - error stop

Hi,
I get this error while importing the patch for HR and basis. the status is Error Stop
Error in phase: IMPORT_PROPER
Reason for error: TP_CANNOT_CONNECT_SYSTEM
Return code: 0012
Error message: A tool used by tp aborted
Please help me
thank you
chandra

Hi chandra,
is the SAP server up? if it is, try the following:
1) resetting SPAM status-> SE37->SPAM_RESET_STATUS
IV_FORCE=X
IV_TOOL=SPAM
IV_WITH_POPUP=X
If still issue persists:
2) delete the entries from /usr/sap/trans/EPS/in and then reload the files again.
If still issue persists:
3) Run the below command
tp R3I <name of the Sc> <SID> pf=/usr/sap/trans70/bin/TP_DOMAIN_70.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
Regards,
hemanth

Similar Messages

Import Proper error while importing SAPKB64019

Hi,
We are trying to import SAPKB64017 to SAPKB64020 in a queue.
However,it gets stuck for 19 in the import proper phase,with the message:
""Import phase 'IMPORT_PROPER' (23.08.2007, 15:59:58)
Error during executing the tp command 'tp R3I all DEV ...'
tp return code: '0008' , tp message: 'A tool used by tp produced errors' , tp output:
This is tp version 340.16.31 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBNAME is no longer used.
ERROR: stopping on error 8 during MAIN IMPORT
stopping on error 8 during MAIN IMPORT
tp returncode summary:
TOOLS: Highest return code of single steps was: 8
WARNS: Highest tp internal warning was: 0118
standard output from tp and from tools called by tp:
This is R3trans.exe version 6.13 (release 640 - 26.02.07 - 15:37:00).
2EETW104 "R3TRMSAGAM " was repaired in this system and must not be imported.
R3trans.exe finished (0008).
Details of the error situation can also be found in the import logs
Interrupt the import due to an error situation (23.08.2007, 16:00:06)
Display detailed informations concerning the error in phase 'IMPORT_PROPER'
Abort the import due to an error situation (23.08.2007, 16:00:10)""
I've checked in SE03 ,however there are no requests containing this object.
Pls. help,since it is very urgent.
Thanks a lot,
Saba.

Please ignore earlier post :
Using TCODE SE03 did you Select :
In Change object directory
R3TR MSAG AM
Regards ,
Santosh

Importing SAPKB62043 error stop

Hi
I installed fresh 4.7R3-x200 system on WIN2003/MSSQL platform,next upgrated to 6.4kernel stack 58, tp and r3trans are updated to latest patch levels also SPAM is upgraded to 18.
Then started applying Basis Support Packs,at this point facing problems ,it was failing at SAPKB62043 in IMPORT PHASE XPRA_EXECUTION
Could someone help me out to solve the problem?
Thanks in advance to all
Here the import log files
The import was stopped, since an error occurred during the phase
XPRA_EXECUTION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
     -   Error in phase: XPRA_EXECUTION
     -   Reason for error: TP_STEP_FAILURE
     -   Return code: 0012
     -   Error message: OCS Package SAPKB62043, tp step R, return code
         0012
   Log Overview for SAPKB62043
         SAPKB62043              Basis Support Package 43 for 6.20
           GEN        GENOVATE SAP
        Generate Transport Information File      (0) Successfully Completed
     Test Import                              (0) Successfully Completed
        Import Request Piece List                (4) Ended with Warning
        Import ABAP Dictionary Objects           (4) Ended with Warning
        ABAP Dictionary Activation               (4) Ended with Warning
        Import                                   (4) Ended with Warning
                      Method Execution           (12) Canceled
                      26.07.2005 14:10:00   (12) Canceled
                      26.07.2005 15:27:24   (12) Canceled
       Import steps not specific to transport request
Log file:                D:\usr\sap\trans\log\SAPRB62043.GEN
           Execution of programs after import (XPRA)
           Transport request___: SAPKB62043
           System______________: GEN
           tp path             : tp
           Version and Release: 340.16.03 640
           Post-import methods for change/transport request: SAPKB62043
              on the application server: GSAP
           Follow-up action AFTER_IMP_O2_TAGLIB for WTAG L started at 20050726140914
           Follow-up action AFTER_IMP_O2_TAGLIB for WTAG L ended at 20050726140915
           Follow-up action AFTER_IMP_SXSD for SXSD L started at 20050726140915
           Program terminated (job: RDDEXECL, no.: 14091001)
              See job log
           Execution of programs after import (XPRA)
           End date and time : 20050726141000
           Ended with return code: ===> 12 <===
===============
JOB LOG
===============
Date        Time      Message
26.07.2005 14:09:14 Job started
26.07.2005 14:09:14 Step 001 started (program RDDEXECL, variant , user ID DDIC)
26.07.2005 14:09:14 All DB buffers of application server GSAP were synchronized
26.07.2005 14:09:19 ABAP/4 processor: LOAD_TYPEPOOL_VERSION_MISMATCH
26.07.2005 14:09:19 Job cancelled

Hi,
Can you please check the Package again.
It seems very new Pacakage. If the package is new you have to wait till BW SP13.
If not please download again from the Service market Place and try.
Refer the note 844007. If it is a test server go for manual correction using the note.
regards
Anand.M

ERROR: stopping on error 7777 during MAIN IMPORT

Dear Expert,
When i am applying Basis and ABAP Support pack 700-17 levels i am getting following red( In Bold) entries in the action log.
   Import phase 'IMPORT_PROPER' (30.12.2008, 14:56:58)
   Error during executing the tp command 'tp IMPORT all CHE ...'
   tp return code: '0014' , tp message: 'A tool used by tp terminated for unknown reasons' , tp output:
     This is tp version 372.04.36 (release 700, unicode enabled)
     ERROR: stopping on error 7777 during MAIN IMPORT
     stopping on error 7777 during MAIN IMPORT
     tp returncode summary:
     TOOLS: Highest return code of single steps was: 14
     WARNS: Highest tp internal warning was: 0118
     standard output from tp and from tools called by tp:
   Details of the error situation can also be found in the import logs
   Interrupt the import due to an error situation (30.12.2008, 15:11:06)
   Display detailed informations concerning the error in phase 'IMPORT_PROPER'
Abort the import due to an error situation (30.12.2008, 15:12:15)
I have found following Notes from the SAP also applied but still i am facing the same error message
Note 1274493 - Windows: TP/R3trans might terminate with old DB library
Note 998004 - Update the Oracle Instant Client on Windows
Regards
Chandra

Hi,
Have you checked note 1288862? Otherwise I recommend to open a message to SAP.
Cheers

Error 'Import Proper'

Hi,
We have ECC 6.0 server 2003 with SQL database 64 bit.
While applying support package in Production server for ABAP(10).It rhrows error 'import proper phase'
Our production server is loacted at different place and connected through router.
Tried again but gave same error.
What could be the reason and what is the way out ?
its very critical.Please suggest
Regards,
manOO

Hi,
How you resolved this problem?
Thanks,
Thiago

PI 711 Installation: Loading of 'SAPNTAB' import package: error but no log

Hello,
I'm perfromong an installation of a SAP PI 7.11 ystem on windoows Server 2003 and Oracle 10.2 .
I've perfromed the installation of the DEV system without particular issue.
But now when tryning to install the QAS system , I can't finish the installation : Im' stuck in the import ABAP step ...
It is impossible to import the 'SAPNTAB' package. I couln't find the reason.
I've tried updating the R3load binary, rebooting the server, restarting the instalaltion from scratch but it didn't help.
Here I provide you the logs, maybe you can help me
SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110223195542
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 14 2010 22:52:23
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS deleted/truncated #20110223195543
sapinst_dev.log
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING    2011-02-23 19:56:12.607
           CJSlibModule::writeWarning_impl()
Execution of the command ""C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\sapjvm\sapjvm_5\bin\java.exe" -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.5.0_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 5.1.024)
SAP Java 64-Bit Server VM (build 5.1.024, Sep 4 2008 23:21:58 - 51_REL - optU - windows amd64 - bas2:106386 (mixed mode))
Import Monitor jobs: running 1, waiting 28, completed 0, failed 0, total 29.
Loading of 'SAPNTAB' import package: ERROR
Import Monitor jobs: running 0, waiting 28, completed 0, failed 1, total 29.
TRACE      2011-02-23 19:56:12.607
Function setMessageIdOfExceptionMessage: nw.programError
ERROR      2011-02-23 19:56:12.607
           CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
import_monitor.log
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is started.
INFO: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2011-02-23 19:55:42
Data codepage 1100 is determined using TOC file 'E:\SAPCD\51036706\DATA_UNITS\EXP1\DATA\REPOSRC.TOC' for package 'REPOSRC'.
INFO: 2011-02-23 19:55:42
Version table 'SVERS' is found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2011-02-23 19:55:42
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is started.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPNTAB' import package into database:
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
ERROR: 2011-02-23 19:55:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is interrupted with R3load error.
Process 'E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast' exited with return code -1,073,741,819.
For mode details see 'SAPNTAB.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2011-02-23 19:56:12
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2011-02-23 19:56:12
1 error(s) during processing of packages.
INFO: 2011-02-23 19:56:12
Import Monitor is stopped.
Edited by: Raoul Shiro on Feb 23, 2011 8:11 PM
Edited by: Raoul Shiro on Feb 23, 2011 8:12 PM

Hello,
Thank you for your answer.
I already opened a sap cutomer call, they answered that it it not a database issue,
I restarted the installationfriom scracth , but i still got the same error :
Here is the full content of the file SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -ctf I E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL SAPNTAB.TSK ORA -l SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: job completed
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS created #20110225170643
Regards.
Raoul

Import failed error in NWDI SAP_PSS

Hi Experts,
I have a problem in NWDI which is I created once DC in SAP_PSS component and during the development we had a problem in desktop and lost complete data in local machine. By that time my activity is released but ! that results broken DC.
Now I am unable to transport this PSS component across the landscape and it is lieing in Consolidation area as import failed.
My doubt is , If i create a same componet in NWDS under PSS with same activity name, Can i push it without errors ?
Kindly help me to resolve this issue. The below is the log file shows
20090607132128 Info :Starting Step CBS-make at 2009-06-07 13:21:28.0252 +3:00
20090607132128 Fatal :Build processing for buildspace: NWD_TXSSSP18_C is not enabled. Cannot continue without NWDI administrator action
20090607132128 Info :Step CBS-make ended with result 'fatal error' ,stopping execution at 2009-06-07 13:21:28.0408 +3:00
Regards,
Jyothi.

Hi Jyothi,
Check the buildspace properties for 'NWD_TXSSSP18_C' in CBS buildspace page(Go to NWDI main page http://<host>:<port>/devinf and click on Component Build Service). The buildspace in question should be Active, Input Mode is should be 'Open' and Request Processing Mode 'ON'. If these properties are not set properly, go to Edit and change these properties and start build process again.
Regards,
Bhagya

Solution Manager 7.1 Step 19 Import Java Dump stopped.

Hi collegues, we are installing SolMan 7.1 under Solaris 10, Oracle 11.2.0.2.
Sapinst in step 19 Import Java Dump stop, it seems that can't connect with DB, DB it's started and also listener.
Dec 28, 2011 2:26:29 AM                      com.sap.inst.dbtools [Thread[main,5,main]] Info: Executing batch. Rows inserted : 64, lob size : 94915222
Dec 28, 2011 2:27:15 AM                      com.sap.inst.dbtools [Thread[main,5,main]] Info: Executing batch. Rows inserted : 3, lob size : 106195204
Dec 28, 2011 2:28:04 AM                      com.sap.inst.dbtools [Thread[main,5,main]] Error: DB Error during import of J2EE_CONFIGENTRY
As the problem is just after import J2EE_CONFIGENTRY, I just applied recommendations of Sapnote:
Note 1173398 - jload export fails with OutOfMemoryException
If the problem occurs during a sapinst run (systemcopy for example), stop the sapinst, and edit control.xml.
Search for the line
   var jloadHeap = "-Xmx1024m";
and replace it by
   var jloadHeap = "-Xmx1540m";
(In my case fixed to -Xmx2048m)
Save control.xml.
Restart sapinst.
It doesn't work, the same error occurs.
R3trans -d also it's wrong, the same error occurs:
4 ETW000 [dev trc     ,00000] Assigning server context 102aa6b28 to service context 102aa3398        35711 0.092247
4 ETW000 [dev trc     ,00000]     OCIHandleAlloc(OCI_HTYPE_SESSION, con=0, usrhp=102b04bc0)             151 0.092398
4 ETW000 [dev trc     ,00000] Starting user session: OCISessionBegin(con=0, usr='/',svc=102aa3398, srv=102aa6b28, usr=102b04bc0)
4 ETW000                                                                                40 0.092438
4 ETW000 [dev trc     ,00000]     OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR                3765 0.096203
4 ETW000 [dev trc     ,00000]     OCISessionBegin(OCI_DEFAULT) failed with SQL error 1034:              137 0.096340
4 ETW000 [dev trc     ,00000]     ORA-01034: ORACLE not available                                        34 0.096374
4 ETW000                        ORA-27101: shared memory realm does not exist
4 ETW000                        SVR4 Error: 2: No such file or directory
4 ETW000 [dev trc     ,00000] server_detach(con=0,stale=1,srvhp=102aa6b28)                              46 0.096420
4 ETW000 [dev trc     ,00000] Detaching from DB Server (con=0,svchp=102aa3398,srvhp=102aa6b28)          30 0.096450
4 ETW000 [dev trc     ,00000] Deallocating server context handle 102aa6b28 from con=0                  216 0.096666
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1034'                         65 0.096731
4 ETW000 [dev trc     ,00000]     set_ocica() -> SQL error code 1034                                  17066 0.113797
4 ETW000 [dev trc     ,00000] -->oci_get_errmsg (con=0, rc=1034)                                        41 0.113838
4 ETW000 [dev trc     ,00000]     OCIErrorGet -> SQL error code: 1034                                   101 0.113939
4 ETW000 [dev trc     ,00000]     ORA-01034: ORACLE not available                                        36 0.113975
4 ETW000                        ORA-27101: shared memory realm does not exist
4 ETW000                        SVR4 Error: 2: No such file or directory
4 ETW000 [dev trc     ,00000] SAPUSER or connect error 99=DBSL_ERR_DB, oerr=1034.                       51 0.114026
4 ETW000 [dev trc     ,00000]     DbSlConnect(con=-1) -> orc=0, 99=DBSL_ERR_DB                           30 0.114056
4 ETW000 [dblink      ,00000] ***LOG BY2=>sql error 1034   performing CON                             7411 0.121467
4 ETW000 [dblink      ,00000] ***LOG BY0=>ORA-01034: ORACLE not available                               61 0.121528
4 ETW000                        ORA-27101: shared memory realm does not exist
4 ETW000                        SVR4 Error: 2: No such file or directory
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'SMP'"
jload.log
WARNING    2011-12-28 13:02:06.671
           CJSlibModule::writeWarning_impl()
Execution of the command "/usr/j2sdk/bin/java -classpath /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/launcher.jar -showversion -Xmx1024m -d64 com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS/install/lib/iaik_jce.jar:/tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS/install/sharedlib:/oracle/client/10x_64/instantclient/ojdbc14.jar -sec SMP,jdbc/pool/SMP,/usr/sap/SMP/SYS/global/security/data/SecStore.properties,/usr/sap/SMP/SYS/global/security/data/SecStore.key -dataDir /net/nashville2/vol/volSAP/SAP_SW/Instalaciones/SolutionManager71/D51040039_SolutionManager_71_JavaBasedSWComp/DATA_UNITS/SOLMAN_JAVA_EXPORT_JDMP -job /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS/IMPORT.XML -log jload.log" finished with return code 1. Output:
java version "1.4.2_32"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_32-b03)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_32-b03, mixed mode)
Jload R 7.12 V 0 A 0
Jload -sec SMP,jdbc/pool/SMP,/usr/sap/SMP/SYS/global/security/data/SecStore.properties,/usr/sap/SMP/SYS/global/security/data/SecStore.key -dataDir /net/nashville2/vol/volSAP/SAP_SW/Instalaciones/SolutionManager71/D51040039_SolutionManager_71_JavaBasedSWComp/DATA_UNITS/SOLMAN_JAVA_EXPORT_JDMP -job /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS/IMPORT.XML -log jload.log
Connecting to database
Couldn't connect to DB
com.sap.inst.common.exception.DBConnectionException: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
        at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:157)
        at com.sap.inst.jload.Jload.main(Jload.java:222)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:331)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:283)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:278)
        at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOsesskey(T4CTTIoauthenticate.java:294)
        at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:358)
        at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:441)
        at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:166)
        at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
        at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
        at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
        at com.sap.inst.common.db.DBConnection.connectViaSecureStore(DBConnection.java:111)
        at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:151)
        ... 6 more
An error occured during execution. Please consult SAP note 942766 for first steps on troubleshooting the problem.
Any idea?
Best regards.
Jose Angel Herranz

Thanks collegues, there was a problem with link to listner, I retry and continue, but know there is another problem:
28-dic-2011 17:08:45 com.sap.inst.common.size.provider.OraObjectSizeProvider getTableSizesFromDb
INFO: Calculated size for table J2EE_CONFIGENTRY : 1744830464
Trying to create table JCS_MONMESSAGE0
com.sap.dictionary.database.dbs.JddRuntimeException: Table JCS_MONMESSAGE0 could not be created in database.
Version: dev 19.03.2010 19:30:00
Protocol:
17:08:45 2011-12-28 dbs-Info: <<< Begin of phase: Analysis
17:08:45 2011-12-28 dbs-Info: <<< Analyze table JCS_MONMESSAGE0 >>>
17:08:45 2011-12-28 ora-Info: Table JCS_MONMESSAGE0 not found on DB
17:08:45 2011-12-28 dbs-Info: Action: CREATE
17:08:45 2011-12-28 dbs-Info: <<< End of phase: Analysis
17:08:45 2011-12-28 dbs-Info: <<< Begin of phase: Execution of statements
17:08:45 2011-12-28 dbs-Info: <<< Modify JCS_MONMESSAGE0 >>>
E R R O R ******* (DbSqlStatement dev 19.03.2010 19:30:00)
17:08:46 2011-12-28 dbs-Error: Exception caught during SQL execution ORA-00604: se ha producido un error a nivel 1 de SQL recursivo
ORA-01655: no se ha podido ampliar el cluster SYS.C_COBJ# con 128 en el tablespace SYSTEM
CREATE TABLE "JCS_MONMESSAGE0"
"A_UNIQUEID" NUMBER(19) NOT NULL,
"A_TYPE" NUMBER(19) NOT NULL,
"A_OBJECTID" NUMBER(19) NOT NULL,
"A_OBJTYPEHASH" NUMBER(19) NOT NULL,
"A_FIELDNAMEHASH" NUMBER(19) ,
"A_STRINGVALUE" NVARCHAR2(1024) ,
"A_NUMBERVALUE" DECIMAL(31,7) ,
"A_LONGVALUE" NUMBER(19) ,
"A_OBJDELETED" NVARCHAR2(1) DEFAULT 'f' NOT NULL,
"A_MONOBJID" NUMBER(19) ,
"A_PARENTID" NUMBER(19) ,
"A_CREATEDTS" NUMBER(19) DEFAULT 0 NOT NULL,
"A_LASTMODIFTS" NUMBER(19) ,
"F_CRTIMEZONE" NUMBER(19) ,
"F_LASTMODSUB" NUMBER(19) ,
"A_LLPVERSION" NUMBER(19) DEFAULT 0 NOT NULL,
"A_BEHAVIOUR" NUMBER(19) DEFAULT 0 NOT NULL
E R R O R ******* (DbModifier dev 19.03.2010 19:30:00)
17:08:46 2011-12-28 dbs-Error: Statements could not be executed
17:08:46 2011-12-28 dbs-Info: <<< End of phase: Execution of statements
17:08:46 2011-12-28 dbs-Info: Analysis and adjustment of tables finished with errors
        at com.sap.dictionary.database.opentools.DbTableOpenTools.createTable(DbTableOpenTools.java:90)
        at com.sap.dictionary.database.opentools.DbTableOpenTools.createTable(DbTableOpenTools.java:69)
        at com.sap.inst.jload.db.opentools.DbTableOpenTools.createTable(DbTableOpenTools.java:21)
        at com.sap.inst.jload.db.DBTable.createObject(DBTable.java:61)
        at com.sap.inst.jload.db.AbstractDBObject.create(AbstractDBObject.java:101)
        at com.sap.inst.jload.executor.JobExecutor.dbImport(JobExecutor.java:327)
        at com.sap.inst.jload.executor.JobExecutor.executeJob(JobExecutor.java:766)
        at com.sap.inst.jload.Jload.main(Jload.java:273)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:331)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
An error occured during execution. Please consult SAP note 942766 for first steps on troubleshooting the problem.
root@napa #

LR cannot Import - Unknown Error

I am getting this error message when trying to import a catalog "Lightroom could not import because of Unknown Error".
The catalog I am attempting to import contains about 6000 images and was built by the beta during the Beta phase. It opens fine by itself - as it worked throughout the beta. I have no problems opening it and working on it directly with LR3.0.
However, since this was my catalog for just a couple of projects during the Beta, I now want to fold it into my main catalog of some 19,000 images. My main catalog was my LR2.7 catalog and I have successfully converted it to LR3.0 - it opens fine and works fine.
Said in another way, while running 3.0, I can switch freely back-and-forth between these 2 catalogs using File | Open Recent
I am just unable to import the beta's converted catalog into it. After doing File | Import from Catalog, LR asks for the name - I navigate to the xxx.lrcat file and select it. The import starts and displays a Preparing to Import information window...perhaps for a second or two, then stops with the above message which is reported as a Warning .... however, the import stops at this point.
So, this is kind of serious......
Both catalogs are on the same drive, with plenty of free space.
What additional information do you require to resolve this ?
jc

thanks for the input .... I had some duplicates in the beta catalog. I
resolved them manually then removed them from the catalog and Optimized it.
I was then able to Import from Catalog without difficulty.
jc
From: Gary Jones UK
Sent: Wednesday, June 09, 2010 7:48 AM
To: Jim Camelford
Subject: LR cannot Import - Unknown Error
This has already been reported and the problem has been identified by Adobe.
The key post is this one: http://forums.adobe.com/message/2877882#2877882

Problem with Support Package SAP_BASIS (Error Stop) IMPORT_PROPER

Hi Everyone,
i want to apply Support Pack for SAP_BASIS. Now Its Level is 0009 (ECC 6.0).
i did import the SPs SAPKB70010 and SAPKB70011. We only want until Stack 11.
The test scenario was without an error. But during the Standard scenario there occurred a problem:
SPAM Status: Error Stop
Import Phase: IMPORT_PROPER
I guess there are different reasons:
1) We didn´t make a SPAM update before! it´s still version 7.00/0021.
2) I have no idea if the guy before me made a kernel update.
And now i wanted to update SPAM to version 27. but first i should "repair" this problem because the SAP_BASIS is still in the queue.
Is there a possibility to delete the queue, update SPAM and the Kernel and then try it again with this support package?
We cannot go further than Stack 11!
please help me!

Hi,
This is not because of SPAM version nor the upgrade of kernal.If that was a SPAM problem then it will
not allow you to define the queue.
There are some know problems with this basis patches please read the note .Just run the import again this error would not occur.
If this error occurs then post the import logs for further analysis.
Regards,
Vamshi.

Urgent Help! Import Class errors

Hello,
I have a flash based site (CS4/AS3) with multiple pages and on each page, when click a certain btn, i have a xml image gallery.
I recently bought a xml gallery and have some problems gettin it to work..and the support team doesnt respond so i'm hoping u can help me. It.s not very complicated but i have some problems understanding some things.
Here is the documentation of the gallery > https://dl.dropbox.com/u/21765376/Portfolio_Flash_Gallery.pdf. I managed to configure the gallery but have problems embed it to my .fla project.
This is what i have done so far according to the documentation: i copied the lightBoxLoader to my .fla file; Then created a keyframe on the page that i need to display the gallery and paste this:
import src.Portfolio;
stop();
var myPortfolio:Portfolio;
if ( stage.loaderInfo.parameters["XmlFilePath"]!=null)
    myPortfolio= new Portfolio(String(stage.loaderInfo.parameters["XmlFilePath"]));
else
    myPortfolio= new Portfolio("xml/config.xml");
addChild(myPortfolio);
When test movie : 1172: Definition src:Portfolio could not be found.
Then on that as keyframe, clicked the stage and in the prop panel named Class: Portfolio >> 1172: Definition src:Portfolio could not be found.- import src.Portfolio; /   1137: Incorrect number of arguments. Expected no more than 0. - myPortfolio= new Portfolio(String(stage.loaderInfo.parameters["XmlFilePath"]));   / 1137: Incorrect number of arguments. Expected no more - myPortfolio= new Portfolio("xml/config.xml");than 0.
Folders r structured like this:     Desktop(C...)/SITE >> and here i have Portfolio .fla,which contains the lightBoxLoader + the gallery folders (images>btns,thumbs,view | src> Portfolio Actionscript file   | xml > config ) + my site .fla with necessasry assets.
I also modified > Publish settings/Flash/Actionscript settings / Source path - and here put "../src" .
I know i/m missing something but dont know what, im not pro at AS3!
I hope u understand my problem and can give me a solution!
Please!
Thank You!.

It seems that your Portfolio constructor is not supposed to take any arguments.

AP INVOICE IMPORT시 GDF 관련 ERROR 가 날때

제품 : FIN_AP
작성날짜 : 2003-01-20
AP INVOICE IMPORT시 GDF 관련 ERROR 가 날때
====================================
PURPOSE
AP Invoice Import시 GDF 관련 Error 가 발생할 때의 해결책을 제시한다.
Problem Description
Korean Tax program을 설치하여 사용하는 고객 사이트에서 AP INVOICE IMPORT 수행시 TAX 관련한 GDF IMPORT 부분에서 ERROR 가 발생하였다.
Error Message 는 다음과 같다.
Invoic 무효한 GF_CONTEXT 컬럼 GLOBAL_ATTRIBUTE_CATEGORY 에 무효한 값
Workaround
KR TAX 프로그램에 따른 specific 한 문제이므로 global한 support를 받을 수 없고 아래와 같은 작업을 해주어야만 한다.
Solution Description
1. GDF 생성
JG_AP_INVOICE_INTERFACE GDF를 JG_AP_INVOICES와 마찬가지로 Setup한다.
2. 다음의 Package의 에서 '수정' 이란 주석이 달린 부분과 같이 수정하여 컴파일 한다.
PACKAGE BODY JG_GLOBE_FLEX_VAL
......(중략)...
IF p_calling_program_name = 'APXIIMPT' THEN --Invoice Gatewayvalidation prog
IF p_context_code IN ('JA.TH.APXIISIM.INVOICES_INTF',
'JA.TW.APXIISIM.INVOICES_FOLDER',
'JA.SG.APXIISIM.INVOICES_FOLDER',
-- 'JA.KR.APXIISIM.INVOICES_FOLDER',
'JA.KR.APXINWKB.INVOICES', -- 수정
-- 'JA.CN.APXIISIM.INVOICES_FOLDER',
-- 'JA.KR.APXIISIM.LINES_FOLDER',
-- 'JA.CA.APXIISIM.LINES_FOLDER',
'JE.BE.APXIISIM.EFT',
......(중략)...
FUNCTION reassign_context_code(
p_global_context_code IN OUT VARCHAR2) RETURN BOOLEAN IS
BEGIN
IF (p_global_context_code IS NULL) THEN
RETURN(TRUE);
ELSIF (p_global_context_code = 'JA.TH.APXIISIM.INVOICES_INTF') THEN
p_global_context_code := 'JA.TH.APXINWKB.INVOICES';
RETURN(TRUE);
ELSIF (p_global_context_code = 'JA.TW.APXIISIM.INVOICES_FOLDER') THEN
p_global_context_code := 'JA.TW.APXINWKB.INVOICES';
RETURN(TRUE);
ELSIF (p_global_context_code = 'JA.SG.APXIISIM.INVOICES_FOLDER') THEN
p_global_context_code := 'JA.SG.APXINWKB.INVOICES';
RETURN(TRUE);
-- ELSIF (p_global_context_code = 'JA.CN.APXIISIM.INVOICES_FOLDER') THEN
-- p_global_context_code := 'JA.CN.APXINWKB.INVOICES';
-- RETURN(TRUE);
-- ELSIF (p_global_context_code = 'JA.KR.APXIISIM.INVOICES_FOLDER') THEN
-- p_global_context_code := 'JA.KR.APXINWKB.AP_INVOICES';
-- RETURN(TRUE);
ELSIF (p_global_context_code = 'JA.KR.APXINWKB.INVOICES') THEN
p_global_context_code := 'JA.KR.APXINWKB.INVOICES';
RETURN(TRUE); -- 수정
-- ELSIF (p_global_context_code = 'JA.KR.APXIISIM.LINES_FOLDER') THEN
-- p_global_context_code := 'JA.KR.APXINWKB.INVOICE_DISTR';
-- RETURN(TRUE);
Reference Documents
-------------------

Blue Screen error STOP:0x0000001E erro

Hi,
Have i have getting blue screen error (STOP:0x0000001E) on windows server R2 standard edition.
Server is working only in safe mode with networking but not normally.
Due to which server is getting rebooted again and again..please help.
suhasish

Hi,
Thanks for your posting. I agree with Paul, since it is not related to Windows Server Technical Preview, I will move it to the Windows
server general forum. Thanks for your understanding and support.
According to the error message, you may need a dump file to narrow down the root cause of the issue. You can analyze
the dump file with Debugging Tools. For more detailed information, please refer to the KB below:
How to read the small memory dump files that Windows creates for debugging
Unfortunately, it is not effective for us to debug the crash dump file here in the forum. Therefore, I would
like to suggest that you contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
If you are outside the US, please refer to
http://support.microsoft.com
for regional support phone numbers.
Hope the issue will be resolved soon. In addition, I would appreciate it if can share the resolution when the
problem is resolved. Thanks for your understanding and support.
Best regards,
Susie

Recovery Problem - Blue Screen error (STOP: 0x00008086)

I am working on a Toshiba Satellite laptop and need to recover back to original state. I do not have Recovery Disks, however, I have followed the Toshiba 'How to' instructions (F8 then select Repair your Computer) it show the Windows progress bar then goes to a black screen for a while then I get a Blue Screen error (STOP: 0x00008086).
Is there any way to get around this?

Hi
If the HDD recovery does not work then you need the recovery disk.
Here you can order this.
https://backupmedia.toshiba.eu/landing.aspx
Greets

ABAP Import Phase error during Install

Hi out there. I am installing an ERP system ECC 6.0 SR3 with just the AS ABAP and ECC components. It is now on the ABAP import phase and returns the error that certain ABAP objects are failing out of the 112 objects that is processing. Current examples are : -
=============================================================================
Loading of 'SAPSDIC_2' import package: ERROR
(DB) ERROR: DDL statement failed
(CREATE INDEX "VRSX2~1" ON "VRSX2" ( "RELID" , "OBJNAME" , "VERSNO" ) )
DbSlExecute: rc = 99
(SQL error -602)
error message returned by DbSl:
=============================================================================
Loading of 'DD03L' import package: ERROR
ERROR : Execute for create index SEOSUBCO~001 on SEOSUBCO failed (dbrc=99).
(SQL error -602)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "SEOSUBCO~001" ON "SEOSUBCO" ( "CLSNAME" , "CMPNAME" , "SCOTYPE" )
=============================================================================
Loading of 'SAPAPPL2_9' import package: ERROR
ERROR : Execute for create index SEOSUBCO~001 on SEOSUBCO failed (dbrc=99).
(SQL error -602)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "SEOSUBCO~001" ON "SEOSUBCO" ( "CLSNAME" , "CMPNAME" , "SCOTYPE" )
=============================================================================
I wish to know how else can 1 work around this ABAP import phase with errors such as these? Is there a manual procedure I can perform for this phase during installations so to avoid these errors that come up. And then re-run the install that goes past this?
Any help will be greatly appreciated.
Thanks in advance.

Hi
Try increasing your shared pool size
login to database level
sqlplus "/as sysdba"
>show parameter shared_pool_size;
if the value is some thing aroung 150 to 200 MB increase it to 250MB
>alter sytem set shared_pool_size=250M scope=both;
Hope this will solve your problem
Regards
Uday

Import proper - error stop

Similar Messages

Maybe you are looking for