Import Proxy Settings

I can for the life of me figure out how to import proxy reg settings. Here is what I have and I know I am missing something dumb here. I have internet explorer bundle and created and install option within that bundle to import the proxy settings. I have create always selected for both the enable proxy and proxy server. I have published and rebooted many times and it just wont create the setting in the reg. I tried to create the reg entry in the launch option as well and no luck . What am I doing wrong here. I am trying to import this
[HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Internet Settings]
ProxyEnable"=dword:00000001
ProxyServer"="10.0.9.1:8080

I found it. There is a option to apply reg entry to the current logged in use and not the default

Similar Messages

Windows 8 and IE10 not accepting Proxy Settings via Group Policy

We have recently introduced a couple of Windows 8 computers in our network, and we are having issues applying the Internet Explorer Proxy Server settings.
We use a Microsoft TMG 2010 server as our proxy server for accessing the internet.
We have been using a GPO with the following settings to automatically configure our Windows 7 computers running IE9 with the appropriate Proxy settings:
User Configuration\Policies\Windows Settings\Internet Explorer Maintenance\Connection/Proxy Settings
“Enable Proxy Settings” : Checked
“Address of proxy” : server.domain.local
“Port” : 8080
“Use the same proxy server for all addresses” : Checked
“Exceptions” : Here we have a list of several internal or partner sites that should not be proxied.
This GPO has worked beautifully for our Windows XP and Windows 7 users with IE 7, 8 and 9.
Now with Windows 8 and IE10, this no longer works.
I’ve therefore added a Windows Server 2012 Domain Controller to the network, and using GPMC on that new DC, I created a new GPO with the following settings:
User Configuration\Preferences\Control Panel Settings\Internet Settings\Internet Explorer 10
Now, seeing as these are preferences, it’s a little different. But, I’ve “checked off” the option “Use a proxy server for your LAN” as well as “Bypass proxy server for local addresses”.
Then I click on “Advanced” and setup all my proxy settings the way I would like them, including the proxy server name, port and exceptions list.
When this new group policy gets applied to my Windows 8 PC, the only setting that gets applied is the “Use a proxy server for your LAN”.
It does not configure the name or port of the proxy server nor does it configure the exceptions list.
If I go back to the GPMC, and edit the new GPO, the settings are all there.
However, if I just view the settings from the main GPMC screen (without opening the GPO itself),
I don’t see all of those settings (again, only the one “Use a proxy server…”)
What am I missing???

Hi All, - (Revised Answer by myself)<o:p></o:p>
I banged my head against the keyboard on this one for some time trying to get this group policy to apply. I
did every thing that was suggested, learning about the F6 and F7 keys to Green underline and Red underline the options required and not required. I even gave in and used the registry settings and it still did not work. It turned out that I had
2 issues. The first one is obvious and the second not so obvious, this is how it is setup:
I have a 2012 R2 Standard DC with Windows 8.1 clients/workstations and IE 11. As you are aware you must make
sure that the following are underlined in green:
Automatically detect settings - (but not ticked)<o:p></o:p>
Use proxy server for your LAN<o:p></o:p>
Bypass Proxy for local address<o:p></o:p>
Next I made sure that the following had red dotted lines:
Address<o:p></o:p>
This still didn't work, so I went through my 'Do Not use proxy servers for addresses beginning with' removed all
of these and then re-added one by one until the problem materialized. The first issue was when using wildcards I had added an entry with the following:
http://domain.subdomain.com/*
Then caused my proxy fields not to be applied, I re-added this just with:<o:p></o:p>
http://domain.subdomain.com/
<o:p>This next one is IMPORTANT.</o:p>
I had these entries in a Word document of which I had copied and pasted from the entry box for 'Do
Not use proxy servers for addresses beginning with'. As shown in the screen shot above provided by SVEN_BURGER I had very similar entries:
http://domain.subdomain.com/;10.*.*.*;172.27.*.*;http://172.27.*.*
Each time I copied and pasted the line (+ more) above the proxy field on the Windows 8.1 client
be blank after using 'gpupdate /force' I then noticed that in my Word document the whole string was being seen as 1 URL due to the http part at the beginning, so I changed my entry to look like this:
10.*.*.*;172.27.*.*;http://172.27.*.*;http://domain.subdomain.com/
I again noticed that this section:
http://172.27.*.*;http://domain.subdomain.com/
Was being seen as one URL in my Word document. To resolve this I had to add the URL's individually and
apply and OK these before going back in and making the next entry. So I ended up adding them all individually after separating the
URL's in my Word document.
I hope this helps.

Itunes and proxy settings. Itunes keeps the proxy setting from IE and I can't adapt it due to company policy. How can I force itunes to use firefox?

itunes can not connect to server and I can't find its proxy settings.
So I think it uses these from IE and those are blocked by company policy.
So, how can I force itunes to use the firefox settings

I fixed this issue (with help from tech support) and it involved several things.
After adding a song to iTunes, right-click on the song in iTunes and select "Update iTunes Match."
OR go to the iTunes menu-->Store-->Update iTunes Match.
Maybe that's the reason, it just hadn't updated to the cloud.
OR maybe it's not a high-enough bitrate file. This happens to me because most of my tunes are home-recorded.
Sometimes converting to .mp3 or Create AAC version might work. (You do this with a right-click in iTunes, and then you will want to remove the original file from iTunes.)
There is an iTunes Preferences setting, under General Preferences called Import Settings. Try setting it to AAC Encoder and iTunes Plus. That (I think) causes imports to be slightly better quality.
Good luck! The tech support person at Apple is requesting that a knowlege-base article be written about this.

HTTP Adaptor for RESTful service calls -- Proxy Settings?

Hi Guys,
I have successfully configured an HTTP Adaptor on my Access Server, imported a REST service function, set up DTDs etc etc all ok.
Now, when it comes to calling this function in a data-flow, the run of the job just times out while calling the function. I have tried this via another route and this time-out occured their too until I entered my proxy server login details.
I am assuming I need to do this for the HTTP Adaptor but there is no parameter/setting around for me to do this.
Could you please tell me how I can get my proxy settings in place for the HTTP call? If the solution involves the "axis2" file, please could you give me clear/step-by-step instructions on how to use this and deploy it as that area is all new to me.
Thanks very much for any help.
Flip.

you can set the proxy server details in the Additional JVM Arguments of the HTTP Adapter Configuration using the following syntax. Add this to existing memory setting args
-Dhttp.proxyHost=<enter proxyserver name> -Dhttp.proxyPort=<enter proxy port>
have no idea how to specify the credentials, not sure if that can be done using Java arguments, if you are on windows try running the Jobservice under named user, and see if it works

Removing firefox proxy settings does not work until a restart?

When I transfer from my work network (with a proxy server) to my home network (no server), I have to restart the browser before it realizes that there is no proxy server that it has to authenticate with. Until I do this, (re)loading pages gives me an error.
However, when going the other way, it smoothly recognises that there is a server, and no restart is required to continue browsing
I have automatic proxy settings enabled. I have tried selecting 'no proxy server', but I still need to restart firefox for this to work.

Please update to the current Firefox 22.0 release.
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version.
*https://support.mozilla.org/kb/Updating+Firefox
The Firefox 21 version that you currently run is no longer supported with security updates.
*It is important to update Firefox and add-ons to the latest version to get all security fixes.
*FoxyProxy Standard: https://addons.mozilla.org/firefox/addon/foxyproxy-standard/

BI4.0 Crystal Reports Enterprise - Citrix v proxy settings

Hi
When we install CRE4.0 on an individual desktop we have to manually set the proxy settings and also import a config file that has all the various server connections configured.
However, we also want to deply CRE4.0 on Citrix Metaframe. We have doen this successfully but any particualr user still needs to manually set the proxy settings and import the server connections config file.
Is there anyway we can configure Citrix so that these settings are already configured for any particular user accessing CRE4.0 through Citrix.
Cheers
Mike

Hi Mike,
the settings for the Eclipse Engine powering CR4E are saved under:
C:\Users\<USERNAME>\AppData\Roaming\Business Objects\Crystal Reports for Enterprise XI 4.0\configuration14.0.2.364
(replace 14.0.2.364 with your appropriate build number)
While this would definitely be no supported way of doing it, I would try to create a configuration template for CR4E and roll it out to your users. Be sure to test it with one before "fixing" the whole As long as it works ... you should be fine with it.
Btw, proxy settings can be found in
C:\Users\<USERNAME>\AppData\Roaming\Business Objects\Crystal Reports for Enterprise XI 4.0\configuration14.0.2.364\.settings\org.eclipse.core.net.prefs
Cheers,
Thomas

Detecting client proxy settings

Dear All,
Can anyone tell me how to detect client proxy settings from a java application (not in a browser).
I tried System.getProperties().getProperty("http.proxyhost") without success.
Our application is distribuited using Java Web Start technology and needs to know proxy settings to connect to the remote host thru an unknown proxy server.
Solution to this problem is very important and urgent! Please help me!
Thanks in advance!

Look for
proxyHost
proxyPort
or (for https)
https.proxyHost
https.proxyPort

How do I set my MMS proxy settings on iOS 7.1?

I have an iPhone 4S, which has been upgraded to iOS 7.1. I'm on a pay-as-you-go carrier (Red Pocket Mobile) and have configured my iPhone for all other data situations with one exception: I cannot send Multimedia messages to people without iPhones.
Everywhere I look they say "Oh just edit your MMS Proxy settings" and then to do all this:
Enter the main menu.
Select "Settings".
Select "Cellular" and "Cellular Data Network".
Scroll to "MMS".
Scroll to and select "APN" and enter att.mvno.
Scroll to and select "MMSC" and enterhttp://mmsc.cingular.com.
Scroll to and select "MMS Proxy".
Enter 66.209.11.33 :80.
Press "Cellular" to complete.
Press the "Home" button to return to the main menu.
Your phone has been configured.
Note: Switch the phone off and on again
The problem with the above, and everwhere else you see it, is that they obviously are not familar with iOS 7.1. You cannot access your "Cellular Data Network" from "Cellular" nor can you edit any of the cellular settings or MMS settings as far as I can tell, or see. Can anyone help me with this? It's important for my work, and for my personal life.

That iPod touch model doesn’t have enough RAM to be updated past 6.1.6.
(110305)

Bypassing proxy settings does not work

I can't manage to get my Mac to bypass the proxy settings. My bypass settings are:
*.local, 169.254.0.0/16, localhost, 193.230/16, 192.168.0.0/24, 172.16.6.0/24
With these settings if I try to access 172.16.6.120, the server does not respond.
However if my settings look like this:
*.local, 169.254.0.0/16, localhost, 193.230/16, 192.168.0.0/24, 172.16.6.0/24, 192.168.0.252, 172.16.6.120, 172.16.6.130
I can access that IP address with no problems.
I also tried: *.local, 169.254.0.0/16, localhost, 193.230.0.0/16, 192.168.0.0/24, 172.16.6.0/24 and *.local, 169.254.0.0/16, localhost, 193.230/16, 192.168.0.0/24, 172.16.6.* with no success.
Can you please help?

Please update to the current Firefox 22.0 release.
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version.
*https://support.mozilla.org/kb/Updating+Firefox
The Firefox 21 version that you currently run is no longer supported with security updates.
*It is important to update Firefox and add-ons to the latest version to get all security fixes.
*FoxyProxy Standard: https://addons.mozilla.org/firefox/addon/foxyproxy-standard/

If I imported proxy media to edit in fcpx, can I export a hight resolution (apple pro res 422 (hq)) version of the project ?

If I imported proxy media to edit in fcpx, can I export a hight resolution (apple pro res 422 (hq)) version of the project ?

OK, let me re-answer here. You HAVE to have either original or optimized media, you can not have Proxy only media, when using FCPX's inport options. You will switch between which FCPX is using; in 10.1 via the Canvas menu option called "Media", or in 10.0.9 and earily via the Preference's "Playback" settings.
When set to Proxy, FCPX only references that medai, which is 1/4 resolution, and not full quality. When set to Original Or Optimized, you'll get full resolution output, as FCPX is not referencing those files.
The only way to have Proxy only media is to convert it in Compressor and then import that. And that would just be a huge mistake.

Firefox suddenly stopped opening webpages, while other browser work properly. I checked Proxy settings and everything that is mentioned in the central help page, but still no solution found...

In addition, i tried to re-install Firefox many times, without a result. In the time these lines are written, I am using Google Chrome to surf the web.
Neither proxy settings, nor the true/false ipV6 values helped.
The '''"symptoms"''' are as following:
--> The programm itself starts correctly, at usual speed, with no crashes or error messages to pop-up.
--> No page is displayed, neither the home page, nor any other one. I only see a blank white page.
-->The name of the starting tab, as of any other new tab I try to open is "(Untitled)"
-->There is no probability of errors in the Internet Line, because I am using it right now, running Chrome.
-->The full scan results are totally clean, using Panda Internet Security 2011, activated and updated.
-->The Error Console shows the following messages:
Could not read chrome manifest file 'C:\Program Files\Mozilla Firefox\extensions\{972ce4c6-7e08-4474-a285-3208198ce6fd}\chrome.manifest'.
Warning: XUL box for _moz_generated_content_after element contained an inline #text child, forcing all its children to be wrapped in a block.
Source File: chrome://browser/content/browser.xul
Line: 0
Warning: WARN addons.updates: HTTP Request failed for an unknown reason
Source File: resource://gre/modules/AddonUpdateChecker.jsm
Line: 503
Warning: WARN addons.repository: Search failed when repopulating cache
Source File: resource://gre/modules/AddonRepository.jsm
Line: 573
Error: Livemark Service: feed processor received an invalid channel for http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml
Source File: resource://gre/components/nsLivemarkService.js
Line: 635
Error: Livemark Service: feed processor received an invalid channel for http://www.dent.uoa.gr/data/feeds/announcements_atom.rss
Source File: resource://gre/components/nsLivemarkService.js
Line: 635.
These Error messages appear in the Error Console of the just now downloaded Firefox 4.0. In the previous version, 3.6.12, before removing it, I noticed two more error messages in the error console, like the two last as listed above: With the nema ERROR.
I am forced now to use Chrome, and I dislike that!
Some could suspect that Google has sabbotaged firefox to get its popularity by forcing users to change browsing programms by giving them a hidden worm..?? :P
Please, help me out anyone with good will and strong tech-knowledge.
Tasos!

Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Failed to import publish settings file in Azure Toolkit for Eclipse with Java downloaded from Azure Management Portal

I tried to deploy the Hello World JSP application to Azure from Eclipse following the instructions at http://msdn.microsoft.com/library/azure/hh690944%28VS.103%29.aspx. Got the following error when trying to import Publish Settings file downloaded from Azure
Management portal:
Importing MyMSDN.publishsettings file failed. Reason: failed to parse file. Ensure publish settings version is 1.0.
Could someone help me solve this problem? Thanks.

Hi huihuang,
It seems there is some issue with your publishsettings file, could you open this file and copy the content here? Or please have a look at this article:
http://gauravmantri.com/2012/09/14/about-windows-azure-publish-settings-file-and-how-to-create-your-own-publish-settings-file/ for more information about it.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I have proxy settings stay for multiple users on an educational network?

Hi,
I want to be able to have mutlple users log onto machines and haave proxy settings already set in preferences. I have tried by copying the Mozilla folder in to the All users location and does not help.
Each user logs onto a computer with a mandatory or Roaming account depending on account security. Settings for firefox are picked up from their Documents and settings folder when they log on (It is created when they log on for the first time)
Is there a way to pull across proxy settings for a new user? Ussually it would be a case of just sticking it in All Users.
Thanks

A possibility is to create a file user.js and place that file in the default template location (defaults\pref) in the Firefox program folder.
If you don't want users to change the proxy (connection) settings then you can also lock the prefs or set a different default value.
See http://kb.mozillazine.org/Locking_preferences
You can use these calls in mozilla.cfg to set or lock a pref:
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes
http://kb.mozillazine.org/network.proxy.type
http://kb.mozillazine.org/network.proxy.%28protocol%29
http://kb.mozillazine.org/network.proxy.%28protocol%29_port

How to use proxy settings for one website

Hello,
I have to access the only one website using Proxy settings and for others I don't need proxy to access. Is there a way to configure the internet settings to allow one website using Proxy... Please advise. Thanks!
Regards,
Aravin S

I am also getting this "error". The printer (8500 A910) connected to the web well enough that it went out and supposedly downloaded a new update, but then it was supposed to print a page showing the email address, but did not.
So I go in and try to set up the eprint, and it tells me it cannot connect to the sever and I'll need to enter a proxy address and port number. But my ISP's cable modems do NOT have any static IP address nor do they provide any sort of proxy service. Everything works just fine with "automatic discovery" (DHCP) for every computer in the house. No problems there.
So, since that's the case, of course I cannot look up some proxy address and port number in my web browser because they're all set up for "automatically detect settings".
What's baffling is that the printer connected to something at HP to download the "update", and it went through a process that appeared to be what I'd expect it to do if it was updating its firmware. But it won't connect to whatever it's supposed to connect to to have an email address assigned.
Does HP supply a proxy server? If so, what's its IP address or URL, and what port should a person set the printer to try to use?
UPDATE:
It appears that the HP site must have just been "down" for about six or seven hours while I was trying to get the printer to connect because it now connected and I got an email address asigned without needing to have any "proxy" stuff set up at all. It's a shame that the printer does not simply report "HP Site down - try again later" instead of reporting that you need to use a proxy when that's impossible.
"Now, on to the next problem which is that my emails to the assigned address are all bouncing with a "550 5.7.1 Command rejected" error!

How to make proxy settings in solaris 10 i386

Dear Sir,
I need your help in making proxy settings in solaris 10 x86, as well as on SPARC.
i installed on virtual machine, and later i wanted to do the same on M4000 server. please help.
Why I need to set proxy?
I am on a co-orporate network, and it requires proxy to use internet to download packages for sun directly from sun machine.
What package I want to download?
I want to dowload CUPS to configure LINE PRINTER(ALIS5180).
What did i do to configure line printer?
1, i installed sun solaris 10 on a dell server to make it as a "print server"
2, with the print manager I configure "alis5180"
3, give the print command to test the printing.
4, I did not got success, coz it is not printing the document i want, it is printing junk.
5, i clear the cache of alis5180 printer.
6, reset all the emulations ANSI, IBM Proprinter III XL, Epson FX-1180, Printronix® P600 & P 5000/6000, DEC® LG01, HP 2564C, Tally line/dot matrix printer, Epson FX 1180,
MTPL, contextual arabic, Twinax (IBM 4234/4210/5225)/Coax(IBM4234), HP LineJet HPLP Series, HP 256X no success.
Conclusion:-
This is why I want to configure cups. and I need internet access on the print server to download the this package, and it require internet connection.
Regards,
Mky
Edited by: user9007339 on Jan 22, 2012 3:29 AM

You could try the Dell site, but I doublt if they will have a driver for Solaris, Linux maybe but not Solaris. Otherwise try the DriverGuide web site. http://www.driverguide.com/
You could also try installing OpenSolaris if you don't specifically need Solaris 10. Better chance that OpenSolaris will support the NIC.

Import Proxy Settings

Similar Messages

Maybe you are looking for