Import Public Folders from pst file

I am trying to import our Exchange 2007 public folders into our managed Exchange 365 account at Microsoft. I created the Primary Hierarchy public folder name, PublicFolders, but don't understand how to use pst import to get the public folders
under this main folder. All I have accomplished thus far is to use Outlook to import the public folders into the administrator Outlook account on the managed Microsoft O365 server. They import into a folder called IPM_SUBTREE in the administrator
mailbox on the server. Do I somehow have to move the public folders from there to the actual public folder location? I really need and appreciate any help.

Hi,
For this issue, I recommend you post to Office 365 forum which is staffed by more experts, you might get a better help there. Thanks for understanding.
http://community.office365.com/en-us/forums/default.aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

Remove password from .pst file

Dear Support,
How to remove forgetten password from .pst file.
I use OS win7 professional and Ms office 2013. So please help me for removing forgetting pst password.
When I add pst file in new outlook. Then Pst file ask password.
please help me.
I will be thank ful to you.

the goals of a password is to protect the contents from anyone who does not know the password.
As far as I know, there are no tools provided by Microsoft to remove, alter or read the password from a protected pst file. It might even violate local laws to do so.
https://support.office.com/en-ca/article/I-forgot-my-Personal-Folders-file-pst-password-cfaec399-0de7-4f8f-a81b-918b38867ed6
Some third parties might claim to have tools that remove, alter or read the pst password, but I should urge you to be prudent when testing/using such tools (or paying for them).
MCP/MCSA/MCTS/MCITP

Manually Move Public Folders from Exchange 2010 to 2013

Hi all,
I have a issue to finishing my migration from Exchange 2010 to Exchange 2013, I have been trying to migrate my Public folders but always after a couple hours, the migration state is failed.
The final error is the following:
FailureCode                      : -2146233088
FailureType                      : SourceMailboxAlreadyBeingMovedPermanentException
FailureSide                      :
Message                          : Error: Couldn't switch the mailbox into Sync Source mode.
                                   This could be because of one of the following reasons:
                                     Another administrator is currently moving
the mailbox.
                                     The mailbox is locked.
                                     The Microsoft Exchange Mailbox Replication
service (MRS) doesn't have the correct
                                   permissions.
                                     Network errors are preventing MRS from cleanly
closing its session with the
                                   Mailbox server. If this is the case, MRS may continue
to encounter this error for
                                   up to 2 hours - this duration is controlled by the TCP
KeepAlive settings on the
                                   Mailbox server.
                                   Wait for the mailbox to be released before attempting
to move this mailbox again.
So, after seeing this I started to monitoring all process and I realized that after creating hierarchy the process start to fail and keep in StalledDueMailboxlock status, and the error is:
FailureCode                      :
FailureType                      :
FailureSide                      :
Message                          : Informational: The request has been temporarily postponed because the mailbox is
                                   locked. The Microsoft Exchange Mailbox Replication service
will attempt to continue
                                   processing the request after 2/14/2015 12:38:20 PM.
Finally, digging more into reports of migration I found this:
MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to open entry ID. (hr=0x80040115, ec=6)_x000A_Diagnostic context:_x000A_ Lid: 40487 EMSMDBMT.EcDoRpcExt2 called [length=73]_x000A_ Lid: 44583 EMSMDBMT.EcDoRpcExt2
exception [rpc_status=0x6][latency=0]_x000A_ Lid: 62184 _x000A_ Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a_x000A_ Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 51452_x000A_ Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0415-02-14T14:25:40.9210000Z_x000A_
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 2_x000A_ Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 6_x000A_ Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 1741_x000A_ Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0_x000A_ Lid: 11672 dwParam:
0x0 Msg: EEInfo: NumberOfParameters: 0_x000A_ Lid: 23260 Win32Error: 0x6_x000A_ Lid: 61553 StoreEc: 0x80040115_x000A_ Lid: 52176 ClientVersion: 15.0.1044.25_x000A_ Lid: 50032 ServerVersion: 14.3.181.6_x000A_ Lid: 50128 _x000A_ Lid: 50288 _x000A_ Lid: 23354
StoreEc: 0x80040115_x000A_ Lid: 25913 _x000A_ Lid: 21817 ROP Failure: 0x80040115_x000A_ Lid: 22894 _x000A_ Lid: 24942 StoreEc: 0x80040115
So, would like to know if exist any procedure to migrate/move my Public Folders from Exchange 2010 to 2013 manually, something like Export/Import.
Regards!

What script and process you are running to migrate the Public Folders?
And what do you mean by Manually?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.comTwitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Need a script to import the data from flat file

Hi Friends,
Any one have any scripts to import the data from flat files into oracle database(Linux OS). I have to automate the script for every 30min to check any flat files in Incoming directory process them with out user interaction.
Thanks.
Srini

Here is my init.ora file
# $Header: init.ora 06-aug-98.10:24:40 atsukerm Exp $
# Copyright (c) 1991, 1997, 1998 by Oracle Corporation
# NAME
# init.ora
# FUNCTION
# NOTES
# MODIFIED
# atsukerm 08/06/98 - fix for 8.1.
# hpiao 06/05/97 - fix for 803
# glavash 05/12/97 - add oracle_trace_enable comment
# hpiao 04/22/97 - remove ifile=, events=, etc.
# alingelb 09/19/94 - remove vms-specific stuff
# dpawson 07/07/93 - add more comments regarded archive start
# maporter 10/29/92 - Add vms_sga_use_gblpagfile=TRUE
# jloaiza 03/07/92 - change ALPHA to BETA
# danderso 02/26/92 - change db_block_cache_protect to dbblock_cache_p
# ghallmar 02/03/92 - db_directory -> db_domain
# maporter 01/12/92 - merge changes from branch 1.8.308.1
# maporter 12/21/91 - bug 76493: Add control_files parameter
# wbridge 12/03/91 - use of %c in archive format is discouraged
# ghallmar 12/02/91 - add global_names=true, db_directory=us.acme.com
# thayes 11/27/91 - Change default for cache_clone
# jloaiza 08/13/91 - merge changes from branch 1.7.100.1
# jloaiza 07/31/91 - add debug stuff
# rlim 04/29/91 - removal of char_is_varchar2
# Bridge 03/12/91 - log_allocation no longer exists
# Wijaya 02/05/91 - remove obsolete parameters
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
# You may also consider using Database Configuration Assistant tool (DBCA)
# to create INIT file and to size your initial set of tablespaces based
# on the user input.
# replace DEFAULT with your database name
db_name=DEFAULT
db_files = 80 # SMALL
# db_files = 400 # MEDIUM
# db_files = 1500 # LARGE
db_file_multiblock_read_count = 8 # SMALL
# db_file_multiblock_read_count = 16 # MEDIUM
# db_file_multiblock_read_count = 32 # LARGE
db_block_buffers = 100 # SMALL
# db_block_buffers = 550 # MEDIUM
# db_block_buffers = 3200 # LARGE
shared_pool_size = 3500000 # SMALL
# shared_pool_size = 5000000 # MEDIUM
# shared_pool_size = 9000000 # LARGE
log_checkpoint_interval = 10000
processes = 50 # SMALL
# processes = 100 # MEDIUM
# processes = 200 # LARGE
parallel_max_servers = 5 # SMALL
# parallel_max_servers = 4 x (number of CPUs) # MEDIUM
# parallel_max_servers = 4 x (number of CPUs) # LARGE
log_buffer = 32768 # SMALL
# log_buffer = 32768 # MEDIUM
# log_buffer = 163840 # LARGE
# audit_trail = true # if you want auditing
# timed_statistics = true # if you want timed statistics
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
# Uncommenting the line below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest = disk$rdbms:[oracle.archive]
# log_archive_format = "T%TS%S.ARC"
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
# rollback_segments = (name1, name2)
# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
# # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/5 = 8:
# transactions = 40
# transactions_per_rollback_segment = 5
# Global Naming -- enforce that a dblink has same name as the db it connects to
global_names = TRUE
# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com # global database name is db_name.db_domain
# FOR DEVELOPMENT ONLY, ALWAYS TRY TO USE SYSTEM BACKING STORE
# vms_sga_use_gblpagfil = TRUE
# FOR BETA RELEASE ONLY. Enable debugging modes. Note that these can
# adversely affect performance. On some non-VMS ports the db_block_cache_*
# debugging modes have a severe effect on performance.
#_db_block_cache_protect = true # memory protect buffers
#event = "10210 trace name context forever, level 2" # data block checking
#event = "10211 trace name context forever, level 2" # index block checking
#event = "10235 trace name context forever, level 1" # memory heap checking
#event = "10049 trace name context forever, level 2" # memory protect cursors
# define parallel server (multi-instance) parameters
#ifile = ora_system:initps.ora
# define two control files by default
control_files = (ora_control1, ora_control2)
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = TRUE
# Uncomment the following line, if you want to use some of the new 8.1
# features. Please remember that using them may require some downgrade
# actions if you later decide to move back to 8.0.
#compatible = 8.1.0
Thanks.
Srini

Move mailboxes and public folders from exchange 2007 to Exchange 2013

1. How do i move mailboxes from exchange 2007 to exchange 2013. I have more than 1000 mailboxes.
What is the correct way to migrate. do i need to move a single mailbox. During migration do the mailboxes get corrupted
2. I want to move public folders from Exchange 2007 to Exchange 2013.
I ran powershell commands and got these results please do guide me how to move to exchange 2013.and what are the shell commands
Get-publicfolder
Name Parent Path
IPM_SUBTREE
Get-publicfolder | select AdminDisplayName,FolderPath
AdminDisplayName FolderPath
Get-PublicFolderStatistics | select AdminDisplayName,FolderPath
AdminDisplayName FolderPath
exchangeV1 schema-root\microsoft\exchangeV1
Internet Newsgroups Internet Newsgroups
Get-PublicFolder -Recurse | fl name,replicas > c:\publicfolder.txt
Name : IPM_SUBTREE
Replicas : {}
Name : Internet Newsgroups
Replicas : {MAIL\Public Folder Storage\Public Folder Database}

I have started moving mailboxes , i have tried moving few individual mailboxes to see how things go
MAIL is my exchange 2007 and MAIL1 is my exchange 2013, please do refer the below result
PS] C:\Windows\system32>Get-MailboxDatabase -server mail
Name                           Server          Recovery
ReplicationType
Mailbox Database               MAIL            False           None
[PS] C:\Windows\system32>Get-MailboxDatabase -server mail1
Name                           Server          Recovery
ReplicationType
Mailbox Database 1460777952    MAIL1           False           None
[PS] C:\Windows\system32>New-MoveRequest -Identity '[email protected]' -TargetDatabase "Mailbox Database 1460777952"
DisplayName               StatusDetail              TotalMailboxSize
TotalArchiveSize         PercentComplete
[email protected]          Queued                    363.6 MB (381,217,115 ...
0

Public folders from exchange 2007 to exchange 2013

HI I am new to exchange, i am planning to do the migration of Exchange 2007SP3 UR10 to Exchange 2013 CU7, I want to move public folders from exchange 2007 to exchange 2013. wht is the procedure to move and wht are the commands to know how many public folders
i have.I just want to be aware before the installation so that later i can avoid issues.please do guide me

Hi Quiett,
please find how to move public folders on ttp://www.msexchange.org/articles-tutorials/exchange-server-2013/migration-deployment/migrating-public-folders-exchange-2013-part1.html
You can replace your servers names and follow exactly the proedure that is shown there. I strongly suggest to read also the 2nd page (replication) before you start. Please be aware of
Set-OrganizationConfig –PublicFoldersLockedForMigration $True , so you cannot change the source side whle migrating.
Regards,
Martin

How to import a logo from flat file to SAP in SMARTFORM.

how to import a logo from flat file to SAP in SMARTFORM. i need to know whether TIFF format is used and also the full steps.
Thanks,

Hi,
You can not directly use a logo from a file into a Smart form. First you will have to upload it to SAP. This has to be done only once. Once it is imported into SAP then you can use it in smart form. To import a logo to SAP, goto SE78. Open the tree under GRAPHICS. Select the file type and click on the Import (first button on the toolbar, just before delete button). Select the logo file and give it some appropriate name along with description. Select appropriate type of the image and click Continue. Your logo will be uploaded into SAP from a file. Now in your smartform, Create a Graphic Node, give the name of the logo along with other properties. In this way you can import a logo from a flat file into SAP and consequently in a smart form.
Reward points if the answer is helpful.
Regards,
Mukul

How to migrate public folders from legacy (exchange 2003 ) to exchange 2010

How to migrate public folders from legacy (exchange 2003 ) to exchange 2010 . Please suggest ?
Aditya Mediratta

Hi Aditya,
please find the answer in
http://blogs.technet.com/b/agobbi/archive/2010/08/04/how-to-move-public-folder-from-exchange-2003-to-exchagne-2010.aspx
Please ensure you have a working mailflow from Exchange 2003 to 2010, vice versa, before you begin.
Basically it's the same procedure as adding some PF Database in E2K3; just
run .\AddReplicaToPFRecursive.ps1 -server "Exchange 2010 Server" -TopPublicFolder "\" -ServerToAdd "Exchange 2010 Server"
Wait until some initial data started to replicate; after that run
Update-PublicFolderHierarchy -Server "Exchange 2010 Server"
After replication has finished you can do a
.\MoveAllReplicas.ps1 -Server "Exchange 2003 Server" -NewServer "Exchange 2010 Server"
Please let me know if it worked.
Kind regards,
Martin

Public Folders from 2010 on-prem to Office 365 PF database?

Where is the guidance on moving 2010 on-prem public folders to an O365 Public Folder Mailbox. The only thing I have found so far is
this, which is just to configure cloud users to connect to on-prem Public Folder databses. I'm looking for cutover/migration steps to move to a O365 PF database, not Sharepoint Online.
Are people typically using 3rd parties for this, or is their Microsoft Guidance?
http://jaworskiblog.com

Hi Scott,
Did you checked already this:
Use these scripts to migrate public folders from Exchange 2010 or 2007 to Exchange 2013.
In order to migrate Exchange 2010 or 2007 Public Folders to Exchange 2013 on O365, we need to analyze the existing
Public Folder hierarchy for size to figure out the number of Public Folder mailboxes that are required on O365 and the distribution of folders across mailboxes. http://blogs.technet.com/b/catastrophic_failure_joannav/archive/2013/06/12/microsoft-exchange-2013-public-folders-migration-scripts.aspx
Regards, Catastrophic Failure "JV"

Importing personal certificate from pfx file

Using iPhone configuration utility 3.5.0, Is it poosible to import a perosnal certificate using a .pfx file.
When I try to miport it only lists certificates in the personal certificate store on windows machine? It doesn't allow me to import a certificate from a file.

I am pretty sure that you can mail this certificate to an email account you can access on your iPad. Then when you open the certificate file it will be imported

Do imported emails from pst files get saved to Exchange Server?

So I exported a user's email into a pst file and I'm importing all of them into his new email address. My question is whether these newly imported emails will be only available locally or will they be uploaded into the Exchange server (which is TWC's
hosted service) and therefore he'll be able to access them from his phone as well? If they are not uploaded, how would I go about to making these emails available on his phone through his new email address as well then?

Hi th0rax,
yes, if you imported mails from a PST file to the Exchange Mailbox you will be able to Access them from Outlook, OWA and ActiveSync where you habe Access to your Mailbox.
I suggest you should do that via new-mailboximportrequest (http://technet.microsoft.com/de-de/library/ff607310(v=exchg.150).aspx) if it is a big PST file and maybe a longer
list of users.
You can also Import via Outlook but in that case you need to have that Outlook Client running until "All Folders are up to date" and the new Mailbox Content was replicated to your Servers Mailbox after the Import was done.
Regards,
Martin

Outlook 2013: Imported or copied items from .pst file disappear after a few seconds

I am migrating from an open source email platform (Axigen) to Outlook/Exchange 2013. The Axigen system uses a connector for Outlook allowing users to use Outlook as a client.
To move from Outlook 2010 with the Axigen server to Outlook 2013 with Exchange I have exported the entire mailbox from Outlook 2010 to a .pst file which I am then trying to import into Outlook 2013.
The import process appears to complete successfully and the imported items show up in Outlook 2013 - but only for a second or two. Then they disappear completely, nowhere to be found. This happens with ontacts, emails and calendar items and the result
is the same whether I import the entire mailbox or just a folder at a time.
If I OPEN the .pst file into Outlook 2013 everything in it looks perfectly OK, I can view items with no problems, all folders are there with their correct content. Now if I try to move or copy
items from the opened .pst file into the Outlook 2013 mailbox, I get the exact same symptoms as when importing. Items show for a couple of seconds and then disappear. If I copy or move a
folder, the folder remains in the Outlook 2013 folder tree but the items in it disappear.
Why would items be perfectly visible and readable from an opened .pst file but disappear when they are copied into the new 2013 mailbox?
They are not visible in OWA either, btw, so this is not just Outlook not displaying them, they are really gone. Checking the folder size in Outlook shows an empty folder (size 0, 0 messages). I have tried the /cleanviews switch when starting Outlook.
This has me completely stumped. Any ideas?
Thanks in advance!

More strangeness:
I set up an Android phone to sync with this account just now. I imported my contacts list from the phone into the Exchange account. After sync, all the contacts are perfectly visible on the phone, but NOT in Outlook 2013 or in OWA...
So maybe it is some sort of display filter thing after all?
That's unbelieveable that message is visiable in Android phone through Exchange ActiveSync but cannot be viewd in OWA...
For the database session, we may enable
Exchange Mailbox Audit logging(http://technet.microsoft.com/en-us/library/ff461937(v=exchg.150).aspx) to check if the message is indeed upload into DB from Outlook.
For the client level, please enable Outlook logging to log what happens inside outlook to aid in your troubleshooting.
We can enable Outlook logging in Outlook 2013 under File > Options > Advanced > "Other" section
Log files are created as .etl files and stored in %userprofile%\Local Settings\Temp. A new log file is created each time Outlook starts.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected].
Okay, I have enabled Outlook logging. However I cannot find any way to read those .etl files.
I also enabled audit logging in Exchange but as I understand it that will not log operations performed by the mailbox owner, only non-owner access.
I think I am close to giving up on this. I can't believe an enterprise email platform will simply delete messages copied into a mailbox without any error message whatsoever, and no way for an admin to track what is happening.
It is definitely happening when syncing with Exchange, so there must be something in these items (and
remember this happens not only to email messages, but also to Contacts) that makes the Exchange server decide these messages should be discarded witout warning.
One other thing: Folders copied from the .pst are visible on Outlook (although their contents are deleted) but not on ActiveSync clients. If I create a new folder in the mailbox, it syncs as it should.

Migrate only a selection of public folders from 2007 to 2013

Like the subject says- I've been asked to move a small selection only from 2007 to 2013. Essentially out of 4700 public folders they only want to migrate 170. I've always just moved them all and can't think of a way to do this. I can't just delete
the rest of the public folders on 2007- they want to keep them for a short while just in case they've screwed their logic. (They are relying on LastModifiedTime- no access in the last 6 months).
Any Suggestions?
regards
Tony

I agree with Gary that with the MS default process this is true, however if you are open to 3rd party products Lucid8's DigiScope would allow you to open an Offline Copy of the 2007 PF, Filter out what you don't want to copy and then restore the balance
of folders from the offline EDB directly into the 2013 PF.
And of course you could also export the 170 folders to PST and then import to 2013 however that could get a bit ugly...
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003
--> 2007 --> 2010 --> 2013 with Lucid8's
DigiScope

Moving public folders from exchange 2003 to exchange 2010 error while moving replicas

Dear All,
i am in the process of migrating from Microsoft Exchange 2003 to Exchange 2010,
i am done with moving all the mailboxes 300 mailbox almost with a 1.5 TB DB with no issues
when i tried all the processes, procedures, instructions and forums to move the public folder or
to use move all replicas from Exchange 2003 to Exchange 2010 i always get errors , now when i try
to open PF Management console from the exchange 2010 server i get it but it is disconnected
then i can choose to coneect to the new server name EXCHANGE2010 with no issues
when i try to expand the default folder and system folder i get the following error.
OAB is set on the new server as default.
when i try to add replica using power shell i get this error:
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an inst
of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Get-PublicFolder], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Management.MapiTasks.GetPublicFolder
following error when trying to expand PF on EXCHANGE 2010
Microsoft Corporation
Microsoft® Windows® Operating System
6.0.6000.16386
Unexpected error [0x7653450B] while executing command 'get-publicfolder -getchildren -identity '\' -server 'Exchange2010.ptdubai.com''.
Microsoft.Exchange.Configuration.MonadDataProvider.CommandExecutionException: Unexpected error [0x7653450B] while executing command 'get-publicfolder -getchildren -identity '\' -server 'Exchange2010.ptdubai.com''. ---> System.NullReferenceException: Object
reference not set to an instance of an object.
at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.GetMapiPublicFolderDatabasesIdentities(ADSystemConfigurationSession configurationSession, ADObjectId serverId, TaskErrorLoggingDelegate errorHandler)
at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.ValidateServerContainsPFDatabase(Server server, ADSystemConfigurationSession scSession, TaskErrorLoggingDelegate errorHandler)
at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.ResolvePublicFolderServerAndUserLegacyDNs(ADSystemConfigurationSession scSession, ServerIdParameter serverIdParameter, String& serverLegacyDN, String& userLegacyDN, Fqdn& serverFQDN,
TaskErrorLoggingDelegate errorHandler)
at Microsoft.Exchange.Configuration.Tasks.GetMapiObjectTask`2.CreateSession()
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.GetTaskBase`1.InternalStateReset()
at Microsoft.Exchange.Management.MapiTasks.GetPublicFolder.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.ClosePipeline(MonadAsyncResult asyncResult)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.InternalEndInvoke(IAsyncResult results)
at Microsoft.PowerShell.HostingTools.PipelineProxyBase.EndInvoke(IAsyncResult results)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadCommand.EndExecute(MonadAsyncResult asyncResult)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadDataReader.Close()
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadDataReader.Dispose(Boolean disposing)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
at Microsoft.Exchange.Management.SystemManager.DataTableLoader.Fill(RefreshRequestEventArgs e)
at Microsoft.Exchange.Management.SystemManager.DataTableLoader.OnDoRefreshWork(RefreshRequestEventArgs e)
at Microsoft.Exchange.Management.SystemManager.RefreshableComponent.worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Microsoft.ManagementConsole, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
MMCFxCommon, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Microsoft.Exchange.Management.PublicFolders, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Management.SystemManager, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Microsoft.ManagementGUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Common, Version=14.0.631.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.ManagementGUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Configuration.ObjectModel, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Microsoft.Exchange.Diagnostics, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Microsoft.Exchange.Data.Directory, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.PowerShell.HostingTools, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Drawing.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Microsoft.Exchange.ManagementGUI.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Isam.Interop, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Transport, Version=14.0.631.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.PowerShell.HostingTools, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
BPA.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
BPA.UserInterface, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Interop.adsiis, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Interop.Migbase, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.DKM.Proxy, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.AirSync, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Approval.Applications, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.CabUtility, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Cluster.Replay, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Configuration.RedirectionModule, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.ApplicationLogic, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Mapi, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Providers, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Storage, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.EdgeSync.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.EdgeSync.DatacenterProviders, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Extensibility.Internal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.InfoWorker.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Live.DomainServices, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.MailboxReplicationService.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.MessageSecurity, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.MessagingPolicies.Rules, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Net, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Rpc, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Search.ExSearch, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Search.Native, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.StoreProvider, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Agent.AntiSpam.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Agent.SenderId.Core, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Logging.Search, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Sync.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.UM.UMCommon, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.UM.UmDiagnostics.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Rtc.Collaboration, Version=3.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Rtc.Media, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
MSExchangeLESearchWorker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Management.Automation, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Core.Strings, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Core.Strings.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.HelpProvider, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
pspluginwkr, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Management, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
System.DirectoryServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Accessibility, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
MMCEx, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Anonymously Hosted DynamicMethods Assembly, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null
Microsoft.Exchange.Data.Directory.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Configuration.ObjectModel.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
i will be thankful for any assistant.
PF DB is arounf 90 GB with alot of public folders and sub-folders. around 60 mail PF and too many subfolders.

First and the most important thing you need to do is, upgrade exchange 2010 to SP2 and RU5.
Exchange 2010 RTM support is long gone.
http://www.microsoft.com/en-us/download/details.aspx?id=36768
http://www.microsoft.com/en-us/download/details.aspx?id=41480
Your exchange 2010 is still in stogeage ;)
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Import mail folders from Snow Leopard into Lion

Hi,
I've just switched from my MacBook Pro (MAC OS X Snow Leopard) to a new iMac (MAC OS X Lion). On both machines, I've been using Apple Mail.
Now I want to import the Mail folders from the Mail in Snow Leopard to the Mail in Lion. When using FILE > IMPORT FOLDER nothing was imported: Both settings, importing from Apple Mail and importing ".mbox" files, did end in a message saying that the folders could not be imported.
So I figured out how to access the library folder in my user account on lion and pasted all the mailboxes from Snow Leopard to LIBRARY/MAIL/V2/MAILBOXES. After that, I deleted the "envelope" files from LIBRARY/MAIL/V2/MAILDATA. I started Mail and it created the envelope files from scratch. Now I can see the mail folders, but they are all empty! However, when I browse to the mailbox files in the Finder (LIBRARY/MAIL/V2/MAILBOXES), I can see that each mailbox ".mbox" folder has an "Info.plist" and a folder "Messages". Those folders are not emtpy!
How can I get my Mail in Lion to properly display the messages in the folders?
Any comments are welcome! Thanks for your support!!
Regards,
Matthias

Could you please explain the whole process of exporting mail from Snow to Lion. I have been trying for weeks on two diffrent computers and I can not get it to work.
I have moved the library, not sure to delete the envelopes. How do you export the mbox-files ? Any help would be greatly appreciated.
Thanks in advance!

Import Public Folders from pst file

Similar Messages

Maybe you are looking for