Import queue frequently goes into locked status.

Hi Team,
In STMS--->import overview---->( SID ) 
Im fornt of SID , we see locked button  frequently. Even after unlocking the queue, it comes again.
Please let me know if you have any hint on this.
Best Regards,
Tushar.

Hi,
SAP_BASIS release ?
Check weather the <SID>_MOVE.LOC file is there under \usr\sap\trans\buffer directory ? <SID> is the System ID for which the import queue is getting locked frequently.
If such file is there, then delete it. Then refresh the Import Queue.
Regards,
Bhavik G. Shroff

Similar Messages

  • Ipad mini goes into lock screen?

    My ipad mini keeps going into lock screen whilst I am using it. What could be causing this?

    If you do not touch the screen within the lock screen time period it will do this. If this is happening while you are actively touching the screen or other action then:
    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • Facing problems with network due which the phone goes into hangs status

    Facing problems with network due which the phone goes into hangs status.  some one help me with switching between 2g and 3G network

    Hi Mani Nair,
    I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are talking about having issues with a 3G cellular data network, you may find the troubleshooting steps outlined in the following article helpful:
    iPhone cellular data connection issues
    Regards,
    - Brenden

  • Workflow goes into incorrect status RESERVED

    Hi,
    We have gone live with the MSS (PCRs) in June and we have a situation where the manager is trying to approve a PCR and when he clicks on the link (which takes him to the approval screen), he receives a NULL error and in the backend the workflow goes into the status 'RESERVED'.
    Has anybody come across this situation? Can this be security related?
    Any information related to this will be appreciated.
    Regards,
    SC

    Hi Intekhab,
    If you are working with workflows for the first time, you can follow below approach
    (To add to the statements of Murali and Abdullah)
    1. If you are able to track the related workflow log, Extras->Technical Data will give you the workflow template number
    2. Next take this template number and open it through SWDD transaction and analyze the IDOC process setup in your system. Please goto the step where they are checking the IDOC success/failure, the next steps will have the notifications setup.
    (In case you are unable to track the workflow log, try to identify the business process / workflow template related to IDOC errors/notifications in your system, your functional consultant can also help to identify the object involved-> go through the object docs to understand the process)
    - For further info, please paste WF log screenshot
    Hope it helps ...
    ~Haider~

  • My iphone 3gs factory unlocked phone frequently goes into recovery mode. can anyone help me out from this?

    my iphone 3gs is an factory unlocked phone running on ios 6.1.3 which frequently goes into recovery mode. mostly atleast once in a week...how can i fi this problem???

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • CCX - In CAD software agent goes into Reserved status.

    I have CCX 7.0 & CCM 7.1.
    In CAD software agent goes into Reserved status when a call hit to the agent & the agent  is not able to take the call as all icons are greyed out. And this is happening to few agents only while for other agents its working fine.
    Can anyone suggets a solution.
    Rgds,
    Kiran Savalsang.

    Or more accurately - ensure that the CSS that is assigned to the CTI ports includes the partition in which the agent DNs are configured.
    They don't all need to be the same CSS, OR the same Partition.
    Aaron
    Please rate helpful posts..

  • How to STOP messages going into HOLD status very frequently

    I'm facing a problem in our Testing Environment where many messages are going to HOLD Status and also there are no messages in the System Error state.
    We are trying to resend all the messages in every "Conversation ID". After this some messages gets successful and some will go into Waiting status. We then cancel the messages in waiting status and resend all the messages in HOLD status and the process continues till all the messages in HOLD status in every Coversation ID were cleared.
    But this is a very very time consuming process.
    So can you please let me know if there is any solution to fix this prolem.
    Thanks,
    Pruthvi

    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/directToSignIn?loc alang=en_US
    Go the the above
    Sign in. Go to the left side where it says phone numbers. Delete your number. Then save.
    Your iPhone friends will now get the red exclamation point that the message didn't deliver instead of it sending. Then your iPhone friend will force the message to go through as a text by long pressing the message and choosing send as text. Once tthey do that once you're set and all other messages will automatically send as texts for them to you. You just have to hope your iPhone friends realize to force the messages through as texts the first time around  but even if they don't at least they know they aren't reaching you and you aren't ignoring them.
    Does that help?

  • Premiere Pro goes into  "nonresponding" status for everything

    PPro has always worked without much problem.  My usual editing is one track of SD or HD.  I now have three tracks of HD video with an additional audio track and the program goes into "non-responding" status after a few clicks.  Just making an audio track active will send it to NonResp status.  After a minute or so the track becomes active. Each command goes into "non-resp" status.  Spec below
    I7 920
    P6t ASUS
    12 Gig
    GTX 460 (newly installed)
    PPro CS 5.0.3
    7200 RPM HD's no raid
    Note: the tracks are a mix  Video 1 & 2: AVCHD and Video 3:  CAM

    Additional info:
    I've opened a new project imported the same clips on an HD timeline.    I opened Windows Task Manager and all 8 cores(cpu usage) are active as I play each track as it is brought in, however, there is usually a momentary delay for each command.  Tapping the space bar and the timeline begins to play, BUT only after a 5 or 10 seconds.  All 8 cores are at 100%.  When I tap the space bar to stop, there is a delay of up to 15- 25 seconds.
    Also, when I begin to sync tracks manually, the screen freezes and then begins to cycle in and out of 'non-responding' status. At that time only 4 of the 8 cores (cpu usage)  shows any activity.  The cycling continues for more than 5 minutes.  By that time I close the program.
    videos is 1hr and 20 min.
    Any ideas?
    Edit: I have changed the video card back to the original  GeForce 9500 GT

  • Messages goes into scheduled status in adapter engine

    Hi all
    we are doing idoc to file scenario with direct mapping. the messages are getting processed in integration engine sucessfully. the messages are getting into scheduled status in the adapter engine even when there is less load in the server.
    Thiis specially happening for IDOC to file scenario only.  Any help is highly appreciated
    Thanks

    >
    > the system is quite good at the moment but the some of the messages again into scheduled status like ( 10 out of 1000 messages ) . the system is not performing at 100 % rate since some messages moves to scheduled status.  Is still the performance can be improved in any other ways ?
    >
    This is really strange behaviour , If Communictaion channel functioning correctly then all succesfull messages should deliver to Receiver system.
    Better to check payload of scheduled messages(if wrong payload obiously it goes schedule status),try to to reprocess them.
    I never used XCOPY command,so no comment on that.
    Regards,
    Raj

  • IPhone 5 frequently going into no service.

    About 2 months back I bought a new iPhone 5 and it turned out be worst phone experience. This iphone goes into no service mode frequently and remain there making me unreachable to anyone trying to call me. I changed the SIM card, switched to another operator, reset phone, reset network etc but the problem does not go away. I hoped the Apple guys would have fixed the problem in IOS7, but even after upgrade the problem repeats.
    When I searched online I find lots people with the same problem. It is really a pity that Apple is not able to get the basic requirement of a mobile phone right. I can't understand why Apple is not doing anything about it even though many people are complaining. Probably they have become arrogant to don't care the customers any more. (That will be the begining of their end).
    If anyone has any other tricks to resolve this problem, can you please let me know?

    Hi Risdian, thanks for the comments and suggestions, however none seemed to lead to any success. When setting the carrier off automatic, after a few seconds of searching the device returns the message, "Unable to load network list", and I have placed my sim into another unlocked iPhone 5 and it worked perfectly, picking up service almost immediately. I can also iMessage and connect to wifi fine, so i don't fully understand the issue.
    I guess my iPhone is in need of repair, so if there are no other conceivable 'at home' fixes, i'll have to bring the phone to the apple store for a diagnosis. Any other suggestions or comments would be happily welcomed
    Thanks for replying and commenting, you were very helpful

  • LMS 3.2 RME 4.3.1 - Inventory goes into running status never completes.

        I recently added 15 switches to my CiscoWorks install via the DCR.  I waited a bit and none of them were discovered. I tried to kick start a job in inventory in the RME but they wouldn't leave the running state. I poked around the theads here and checked for ../CSCOpx/conf/csdiscovery/DiscoveryStatusObj (it wasn't there) and then tried running "pdexec  CSDiscovery".  This didn't fix my problem.  I bounced all the CW services, problem is still there.  Anyone have any ideas?
    chris

    Joe,
    Thanks for the reply.  I've tried to do the pdterm and pdexec for the ICServer, but it's still not working.  I've opened a case with TAC now. So far he's reset the causer account.  We've tried to manually kick off an inventory job after we've put the device type in.  None of that worked so he had me send a few of the job folders as well all the ICServer logs and the logs that come from archive syncs.  I plan on calling in a few hours to check on the status.  Any ideas as to where we can go from here?

  • How can I stop my phone from going into the lock screen while talking on it? (New issue with ios 6)

    Prior to ios 6, I could talk on my phone and have the mute button available. Now it goes into lock mode while speaking on the phone. This is terribly annoying when on conference calls and you want to mute/unmute, or just hang up a call. I now have to swipe to unlock, go to phone, and hang up or unmute. I've tried upping my timeout, but that just delays the inevitable.

    Yep, it's a pain.  What's even more concerning is that at the Genius Bar, he was trying to tell me that this is the was it was supposed to be, so they probably fixed it in OS 6.  He said it is for people that are using "Bluetooth" and want to keep the phone in their pockets".  Ridiculous!  What compounds the issue is that the Apple Reps have no clue as to what's going on, and either do the senior tech's on the phone.  As I said in my message, this has made it very cumbersome, and makes it very difficult for those who need to use wired headsets.

  • Messages in Schedule status in SXMB_MONI and going into queue in SMQ2.

    Hi Experts,
    All messages in XI going to schedule status in SXMB_MONI. When i check in SMQ2 to release after some time the messages are going to "SYSFAIL (Time limit exceeded)" status.
    When i double click on the message in SXMB_MONI, the system is going to "Runtime Error (TIME_OUT)".
    Could anyone please help me how to fix this issue.
    Thanks in advance,
    GRK

    Hi,
    my scenario is file to idoc....
    I have set paraemter in SXMB_ADM as below.
    Category                Parameters               CurrentValue        DefaultValue
    RUNTIME                 HTTP_TIMEOUT         100000                      0
    I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
    Please do help me..
    Thanks in advance.
    Krish

  • My lap top wont import pictures from auto play. it keeps saying there is a file error and a device connected to the computer isnt working properly. i have tried going into the internal storage to copy and paste the pictures but this wont work either.

    my pictures from my i phone 4s wont import from auto play. a message keeps coming up saying there is an error and a device is not working properly. also i have tried going into the internal storage to copy and paste them but that wont work either. the page either stops responding or the picture simply dont copy. does any1 have any idea why this is happening. it has never happened before and only seems to be happening since i started using i cloud storage instead of synching my phone with the lap top.

    I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
    Today I discovered a new treasure of doggie poop in Lion. No Save As......
    I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
    So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in  mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
    are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
    I am starting to believe that Apple is Satan.

  • IPod touch 1st gen goes into recovery mode after shut down or lock

    Alright, so I bought a used iPod touch 1st gen from a friend. It was working fine for a few weeks until it started shutting off and going into recovery mode when I locked or turned it off. When off, half of the times I can do a hard reatart and hold the home and hold buttonsand it will turn on. The other times it will just come up with a white screen. When I plug it into my computer, it says it has to be restored. And this is an ongoing loop that I cannot seem to fix. I looked up my serial number and it says it's out of warranty.
    So my first question is, is there anyway I personally can fix this problem, or do I have to take it to Apple? My second question is, what are their policies on iPods that were bought used from someone else? And is there a way for me to get a warranty on it to get it repaired if I can't fix it myself or do I have to pay full price on replacement or repairs?

    Welcome to Apple Discussions
    Did you let iTunes restore it? Has the problem continued? The article below discusses how to put your iPod into a recovery mode so you can fix it.
    http://support.apple.com/kb/HT1808
    As to your warranty, you no longer have one. Apple will, for a fee, repair your iPod if it needs repairing. There are independent shops who can do it as well - just Google them.

Maybe you are looking for