Import Relations user-worksation from zenworks

Hi all,
I'm using novell ZCM 11.3 and Service Desk 7.0.3.
I import device details from ZCM with AMIE import. My question is:
Is there a solution to create during import an association between device and customer using ZCM Primary user information?
Thanks

mauro,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Similar Messages

How can I import Related name fields from contacts?

I am using the drag and drop function to get contacts into a table in Numbers. However, it does not seem to work for related names (no headers for those appear). Anyone experiencing the same?

Hi aarild,
The other columns are there, but hidden.
In this screen shot, column labels jump from J to S (also jump from C to J). Click in the table to get Column labels to show.
Unhide all Columns.
Regards,
Ian.

Importing a user table from full export

if i prefer full exoprt with the command given below
exp "'/ as sysdba'" file=aaa.dmp full=y compress=y log=aaa.log
how can i import a table T under a given user schema U?

use parameters
- fromuser=U, touser=<yourschema> to indicate the schema
- tables=T

How do I import Firefox user settings from old computer to new computer without using sync function?

the motherboard on my old Mac G4 powerbook died but i have access to its hard drive contents, including the files located in Application Support>Firefox. I want to import these profile settings into my new Firefox on my new iMac 2011. Which files do I move over so that my new Firefox has the settings/bookmarks/add-ons as my old Firefox?

Install FEBE from Add Ons in FF on old computer. Back up entire profile. Also install FEBE in FF on new computer. Copy FEBE backup folder to new computer. "Restore" from FEBE. All of your settings, including cookies, passwords, etc. will be "restored." Note that on the new computer, you'll need to create two profiles: the default one you'll use on a regular basis and one to use for the restore.

Mapping users coming from different domain in AD

HI,
We have configured vintela SSO which is working.Now we are trying to add another domain but it has been unsuccessful.
We have imported the users coming from other domain in CMC->AD, and UseFDQNDirectoryForServers parameter in registry.
The issue is our complex krb5.ini errors as "cannot find kdc for realm" for the user account coming from the other domain.The existing domain kinit is successful.
Please help in resolving this issue!!! We need to have users coming from different domain to use vintela SSO.
Thank you.

well you're mixing things up a bit.
The usefqdnfordirectoryservers is used to map in groups. If the groups show up as well as the users that piece should be complete.
the krb5.ini is for logging in users manually, it must conatin the KDC for every domain that may contain users that need to log into BO. It also must have a KDC or capath entry to define all the parent domains as well (even if they do not have members that need to login. This is how the krb5 is used to verify transitive trusts. Then all users that are not in the default domain must logon as username@ DNSDOMAIN.COM where the DNS domain is entered in all caps aqnd represents the FQDN of theidomain the users bewlong to. Now if not logging in manually this should be a big problem.
So for SSO (vintela anyway) this process is automatic, although you may want to configure vintela with site information so it doesn't randomly use all your DC's Site can be set following the steps at the end of business objects note 1261835 (complete and vintela only editions).
In order for vintela to work properly the value entered in CMC > Authentication > Windows AD > service principal name must = an SPN thet was created on the account that is running the SIA/CMS
Regards,
Tim

Exporting and Importing Portal users from Source system to Target system

Hi All,
I have exported all portal users from source portal in to file Users.txt do i need to convert this file in to some other format so that i can import these users in Target portal.
any links documents
Regards,
Murali

Hi,
If you look in to User.txt
I have role also i have deleted role in User.txt uploded file with rest of the otherdata including group it it able to create users.
so in Nut shell let's say
1. UID-Murali
Role- Manager
Group- HRGroup
user existing in DEV and i want to trnasfer data to PRD
Role:Manger should exist in PRD, and group is not mandatory optional
but the link http://help.sap.com/saphelp_nw70/helpdata/EN/ae/7cdf3dffadd95ee10000000a114084/frameset.htm
says while uploading users role is optional it throws waring but i got error.
i am bit confused.
Now let's sau there are 10 users, 10 roles and 2 groups in source system if i want to export all users,roles,groups to target system what sequnce i have to follow without getting any error , warining is there any restriction on number of users, roles, groups i know file size should be less than 1MB.
Points are on the way.
Regards,
Murali

Importing User settings from one CC user into another

Hi There,
I want to import user settings from one account, then use those as a base to setup user setting for another. IE I want to use my settings from work [which I did not pay for] and use that as a starting point for my personal user account at my home office [which I did pay for].
I'm concerned about messing up my work settings + at home I'm on a laptop, not a 2 display tower.
Specificaly, its the custom keyboard, sequence and output, and loging colums/metadata display settings that I'd love not to have to setup from scratch, again.
Also, I have co workers who prefer my settings and I'd like to share these with them- but don't want them to be signed in as me, and messing me up accidentaly.
Many Thanks
David

OK so this does not work. I'm running CC, on OSX 10.8.3.
For those that don't know, in order to reveal the library folder in OSX 10.7+, you need to either enter this into terminal:
Permanent Reveal:
chflags nohidden ~/Library/
Permanent Hide:
chflags hidden ~/Library
Or hold down option key + finder/go, for temporary reveal.
So after doing this, and coying over the directories Jax mentioned [+ '7.0' folders, as I'm in CC], I'm still not getting the keyboard mappings, just the defaults.
I've just synced with my work account, and brought up another issue: My scratch disks and media paths are all different on my home office, and I don't want to have to reset those everytime I switch from one location to another.
If I could get what Jax sudgested to work, that would be an exelent work arround for this situation. Otherwise its a feature request for managing syncing between multiple accounts...
Thanks again Jax for tyring to help

Importing SAP users from Prod to Prod

What is the best way to migrate sap users and from one prod system to another.
If I have those SAP user in BOBJ security groups?
Is there a way to move them to new environment (save version) with IMport wizard or LCM and keep their current group memebership?
Thanks,
Dwayneat

If the users and groups do not exist already on the destination system you may be able to migrate them in IW following the same rules as AD/LDAP. The SAP plugin should be configured the same (except no roles mapped in on the destination) and use the IW to migrate the groups/users. I have not tried this with SAP but 3rd party LDAP and AD work this way. If the SAP users show up in the IW I would think the same rules apply.
Regards,
Tim

How to import user profiles from external sources(other than AD) into SharePoint

Hi,
I want to import user profiles from external sources other than AD.
Badri

You have to use BCS for importing the profiles,
Check the following link with explanations
http://msdn.microsoft.com/en-us/magazine/ee819133.aspx
Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

AMIE:javac error when trying to import devices from Zenworks

Hi.
Service Dek 6.5, Zenworks 11.1. I'm trying to import device information from zenworks into Service Desk using AMIE. I can connect to the Zenworks database fine in the, but when I click import I get an administrator alert: "javac is not available. Make sure you are using the JDK"
This is reported as an informational alert rather than an error. Synchronisation in progress is reported, but when it completes nothing appears to have been imported.
I've tried ZENworks Configuration Management v11.1 (LiveTime Software Inc.) Import and ZENworks Configuration Management v11.1 - Hardware (LiveTime Software Inc.) import.
Can anyone advise please?
Many Thanks
Osh..

Am 20.12.2011 14:06, schrieb Sector osh:
>
> Hi.
>
> Service Dek 6.5, Zenworks 11.1. I'm trying to import device information
> from zenworks into Service Desk using AMIE. I can connect to the
> Zenworks database fine in the, but when I click import I get an
> administrator alert: "javac is not available. Make sure you are using
> the JDK"
>
> This is reported as an informational alert rather than an error.
> Synchronisation in progress is reported, but when it completes nothing
> appears to have been imported.
>
> I've tried ZENworks Configuration Management v11.1 (LiveTime Software
> Inc.) Import and ZENworks Configuration Management v11.1 - Hardware
> (LiveTime Software Inc.) import.
>
>
> Can anyone advise please?
>
> Many Thanks
>
> Osh..
>
>
You have to install the JDK without JRE!
(You have to deselect JRE during JDK installation, else the
NSD-installer takes the JRE-path and not the JDK-path.)
HTH
Hans-Dieter

How do I import an address book from another user on same iMac?

How do I import an address book from another user on same iMac?

David...
Try here > Share one Address Book among multiple users

Error while importing the user Records through SCC7

Hi Basis Gurus,
We are doing the post DB Refresh Activities for a Sandbox .
Refresh is done from D21 to S21.
We are stuckup with an error while importing the user Records(scc7).
The exported user records request from D21 is dumped in the trans directory of S38 and imported in to S21 using TP commands at O/S level. The import is done successfully( RC 4 with warnings).
But now when we run SCC7 (post import activities) in the background the process is getting cancelled right in the begining.
Error Occured in SCC3 log
Table logging disabled in program RSCLXCOP by user SAP*"
R/3 Version is 4.6C OS:AIX5.3
Your suggestions will be highly appreciated.
Regards,
Sitaram

Hey Sitaram,
I looks like you have incorrect parameters of client copy in the S21 system.
You can change the parameters in S21 system,
by executing report RSCLXCOP (via transaction SE38 or SA38) in S21.
Search parameters that related to table logging/sap*
good luck!

Powershell script or command to Import AD USers with GUID

I need to import few users with their GUID's from our Training domain to Production domain. Our requirement is Users need to login their existing pc's local profile, once they move to
Production environment.
Our setup;<o:p></o:p>
Training domian:melbourne.com<o:p></o:p>
Domin controller: Training<o:p></o:p>
Production domain: melbourne.com<o:p></o:p>
Domin controller:
Production
Note:
I tried ADMT but it is not allowed to do for source and target as same domain name.
It is really appreciate any one’s expertise on this scenario to import AD users and computers.

You're not going to be able to force creation of an object with any specific guid. That's not relevant to what you're trying to do any way. You also won't be able to clone the SID, since a, it's not supported, and b, the sid contains the
unique domain identifier which will be different for each domain even though the names are the same.
You could use sidhistory to help fix the permissions (add the sid from the account in test to the sidhistory of the account in production). But you'd need a trust relationship between the domains, and I'm not sure if that is supported when the domains
have the same name. You might need to add a different UPN suffix and set accounts to migrate to have that suffix to get around that. I've never actually looked into that situation.
ADMT won't do it though. You might have a command prompt utility that can do it in ADMT. But you should be able to do it with powershell by calling an api. You can probably use Ashley McGlone's sidhistory module for most of this.
https://gallery.technet.microsoft.com/scriptcenter/PowerShell-Module-for-08769c67
You will want to review the details and requirements relating to modifying sidhistory:
http://msdn.microsoft.com/en-us/library/ms677982(v=vs.85).aspx
Okay looking closer, you'll need to do this from C++. The easiest way is probably to use the sidcloner binaries (https://code.msdn.microsoft.com/windowsdesktop/SIDCloner-add-sIDHistory-831ae24b#content
) and call them on demand.
Honestly the best thing is probably get a consultant to come spend a few hours to do it for you. Messing with sidhistory can be a huge time sink.

Call an applications 'user exit' from a PL/SQL procedure

My question is a technical PL/SQL question related to Oracle Applications. I need to call a standard applications 'user exit' from a stored PL/SQL procedure. Can anyone tell me if this is possible and how to do it?
(i.e. I am attempting to call the AR user exit SALESTAX)
Thanks,
Michelle Dodge

Hi,
Read this thread, perhaps is there your response :
Host...
Nicolas.

Cannot send email via ActiveSync when user connect from Internet (Exchange 2010 SP3 RU5)

Hi All.
This is the first time I encounter this kind of issue, whenever user connect from the internet they cannot send email from their Phone or Windows Mail App, but they can retrieve email
But when they connect from Internal Network they can send email. I already test ActiveSync from internet using www.testexchangeconnectivity.com and it pass all tests.
I also check the Firewall and all the necessary ports already opened (we even open all ports) , the default TTL on the firewall 3600 second.
From what I read ActiveSync use some kind of HTTP POST or in MS terminology "PING" command, but still have no idea what kind of configuration that should be made to the Firewall so it can pass this "PING" command. Because from what I
see in Android Logcat the problem always related to this PING command
10-07 08:12:38.714 I/Exchange(31971): Interrupt with reason 1
10-07 08:12:38.714 I/Exchange(31971): Ping task ending with status: -1
10-07 08:12:38.904 D/Exchange(31971): created outputstream
10-07 08:12:39.204 W/Exchange(31971): IOException sending mail
10-07 08:12:39.204 E/Exchange(31971): Generic error for operation SendMail: status 200, result -100
10-07 08:12:39.204 W/Exchange(31971): Aborting outbox sync for error -99
10-07 08:12:39.274 I/Exchange(31971): Ping task starting for 3
10-07 08:12:39.304 D/SyncManager(644): failed sync operation [email protected] u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71219435, EXPEDITED, reason: 10040, SyncResult: stats [ numIoExceptions: 1]
10-07 08:12:39.304 D/SyncManager(644): not retrying sync operation because SYNC_EXTRAS_DO_NOT_RETRY was specified [email protected] u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71220078, EXPEDITED, reason: 10040

Hi ronaldosy,
How about the work flow of Outlook or OWA on PC internally/externally?
If only phone has this issue, I suggest ask ActiveSync Forum for help so that you can get more professional suggestions. For your convenience:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
Best Regards,
Allen Wang

Import Relations user-worksation from zenworks

Similar Messages

Maybe you are looking for