Import request
Hello All,
I need to import transport request ,i have cofile and datafile and i copied these files in usr/sap/sid/trans/cofile and data file respectively but its not showing in queue .
importing resulted in error cofile ,datafile not found.
i used WINSCP to copy these files , also changed authorization through this tool t0 775
Thanks & Regards
Shams
Edited by: shams111 on Jun 24, 2009 9:30 AM
Earlier i could not able to see transport request in a queue even though i coppied in to respective cofile and datafile properly.
also i followed below step it do not worked
STMS_IMPORT --> Extras --> Add --> Other request and manually add the transport request to buffer
It was authorization problem so i changed authorization using putty .problem got solved.
now i tried to import but unfortunately this transport request turned out to be unicode transport request which i was trying to import it into non-unicode sytem .However this must not be done.
Similar Messages
-
Problem in importing request on PRD Server
Hi,
I am not a BASIS Guy and i am doing it on behalf of it. I had released the requets form Dev Client and then i am importing it to the PRD Server and i had used Tcode STMS in which there is field specified import request . I clicked over it and then specified the client i.e. PRD Server and then it gives the msg that IMPORT IS RUNNING .
It has been almost 40 minutes now and it is a single report which is taking a lot of time to import.
I had checked on the Cust & Development Client that it shows the request has been released successfully.
Is there anything which i am doing wrong ? Please guide me for it....The below are the messages given :-
Hi,
I had checked the transport log in which there is following information present:-
DEV System DEV
Checks at Operating System Level 23.12.2009 17:33:19 (0) Successfully Completed
Pre-Export Methods 23.12.2009 17:33:24 (0) Successfully Completed
Export 23.12.2009 17:33:32 (0) Successfully Completed
Transferring System 24.12.2009 11:09:24 (0) Successfully Completed
Import steps not specific to transport request
PRD
Selection for Import 23.12.2009 17:33:32 (0) Successfully Completed
Copy File Between Transport Groups 24.12.2009 11:09:24 (0) Successfully Completed
Import steps not specific to transport request
Edited by: nav009 on Dec 24, 2009 7:52 AM -
i am trying to import request, it was stopped with errors
error code 8
what may be possible reason, can anyone tell how to resolve this prob.Returncode 8 means "error on import" - you need to check the logfiles of the transport to see, what went wrong.
Markus -
Transport request : tp check buffer for already imported requests
Hi,
I want to put a transport request on my prod. There was no problem on the quality. But on the prod, i have the message :
"tp check buffer for already imported requests"
and nothing appends.
Do you have any idea how i can unlock this transport request ?
Tx in advance.Hi,
Use table E070. and display the Transport reqeust and double click on the request row.and in command prompt enter ' /h '. change status as unreleased.
Regards
Jana -
Import Requests failed in CONS
Hi
I'm facing the problem of import requests being failed in CONS.
The reason being for that is:
<b>the import failed because not every request including follow-up requests were processed</b>
I've checked the following things:
a) idleStart is set to false
b) the corresponding track is OPEN
c) BUILD_TOOL_VM_ARGS is -Xmx748M.
I cannot figure out the issue why, requests are failing
Any pointers in this direction will be great help
Thanks in advance
SrikantHi,
By logging on to the CBS WebUI, check whether the property 'Request processing' of your buildspace is 'ON'. If not, select the buildspace and click 'Edit' to set it ON.
Regards
Srinivasan T -
HOW TO VIEW IMPORTED REQUESTS (WITH IN THE SYSTEM) BY USER NAME
Hi experts,
I would like view the owner of the task which have been imported from 100 to 200 using t-code SCC1
in SCC3 the view is ristricted to DATE, TIME & REQUEST.NO
and NO.OF REQUESTS as the actual imported requests are more than the requested displayed in SCC3
Cheers
Deepakhi kaushal,
Thanks for your reply
But i would like to know , which module does the transport request belongs to.
The requirment is to update the project manager with the imported transport request asked by the different functional consultants.
Thanks&Regards
Deepak -
[SOLVED] Mailbox import requests stuck in 'queued' state
We have a small Exchange 2013 environment with one server having all roles. I try to import archive mailboxes from an Exchange 2010 environment. It has worked quite well for a while. However, all import requests are now 'stuck' in 'queued' state. Restart
of Replication service, transport service and even server reboot didn't help.
When I run
get-mailboximportrequest | Get-MailboxImportRequestStatistics -Includereport | fl
I observe that PositionInQueue value tells me that there are 85 import requests waiting :
ItemsTransferred :
PercentComplete : 0
CompletedRequestAgeLimit : 30.00:00:00
PositionInQueue : 85/90 (Position/Queue Length)
InternalFlags : None
FailureCode :
There should be no requests waiting as I removed all requests in advance before I issued new import requests:
get-mailboximportrequest | Remove-MailboxImportRequest
How can I really reset an import queue by zeroing PositionInQueue ?
Any suggestions/tips?Hi,
Glade to hear the good news. Thanks for your update.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support -
How we can monitor while import request in production system?
dear friends,
will you please explain me
how we can monitor while import request in production system?
and
what are the things we have to monitor during the transport?
thanks
regards
zaheerHello Zaheer ,
I would always recommend to check that you have the latest transport tools, tp and R3trans in use in the system to avoid import errors.
Check with
tp -v
R3trans -v
if either are more than around 4 months old, I would strongly recommend to download the latest for your release from the SAP service marketplace. This avoids needlesly encountering issues that have been resolved in more recent patch lebels of these tools.
During the import, it is important to check the contents of the directories
usr/sap/trans/tmp
and
usr/sap/trans/log
that they are being continously updated which shows import is progressing.
Most important, keep checking the latest entries in the alog, uloag and slog to see which phases and trasnports are currently being imported.
If a transport fails, check these logs and the latest ones updated in usr/sap/trans/log for further details on the failure.
If there is an error please NEVER manual run any commands wihtout contacting SAP and having them analyse the issue.
When opening a message, be sure to include the latest alog, ulog and slog, along with the last few files most recently updated in usr/sap/trans/log and if possibel open an R3 connection to the import system.
Best regards,
Paul -
Hi,
Please guide me,
If a import request ends with error I need mail or message so that I can act quickly on that issue.
Thanks a lot in advance..!
Vinod.Hi,
Please Check this thread:
Alert configuration
You can test the alert by executing the report : RSALERTTEST.
For sending mail through SAPconnect
Use following T-codes
1. SCOT.
-for maintiang the routing server details and to mention domain name.
2. SU01
--- maintian the email ID for the user who will recieve the mails.( Users should be in the Alert fixed receipent list).
Hope this will do for you.
Sunil. -
Delete imported requests by job
Hi there,
i am looking for way to delete imported requests from import queue by a job.
Thanks in advance,
Jensyou can schedule job as OS level
tp cleanbuffer <SID> pf=<TRANSDIR>/bin/<TPPROFILE>
this will only clear the successfully imported transports from buffer.
cheers,
-Sunil -
Tp import all - import all with NO deletion of imported requests possible?
Hi,
Story:
We use a Solution Manager to import all transport requests from Testsystem to Integration(Quality)system.
At this transport Solution Manager do this with 'tp import all'. The tp command clean all imported requests out of the import queue.
The problem is:
We do not want that the tp command delete our transported requests out of the import queue.
Is there any possibility to configure this 'transport thing' or 'say' to the tp command not to delete the transported requests?
thx for your help. points will be awared.
bye MikeI get this from the custo documentation:
Configure Transport Strategy
Use
In this IMG activity, you:
Deactivate the quality assurance (QA) approval procedure
Activate the "Single Transports" strategy
In the transport tracks where the software distribution is controlled by Change Request Management, you must deactivate the QA approval procedure in the TMS, since this procedure is incompatible with the approval procedure in Change Request Management. Additionally, you have to activate the "Single transports" strategy. This prevents you from accidentally executing "Import All". All transports within the system landscape of Change Request Management must be processed by project imports.
For more information, see the online documentation about the TMS in transaction STMS by choosing Help -> Application Help.
Activities
Proceed as follows:
1. Call transaction STMS.
2. Choose Overview -> Transport Routes.
3. Double-click each system.
4. The Display System Attributes dialog box appears.
5. In the Transport strategy group box, select Single transports (since only Import Single and Import Project All are used).
6. In the Quality assurance group box, deselect Delivery after confirmation.
(The quality assurance mechanism is used implicitly but not within the TMS context.)
7. Choose Continue.
Note
When you activate "Single transports", manually executed single imports cannot be imported again by using "Import Project". If you want to execute these single imports again by using a subsequent "Import Project", you have to set the corresponding transport option. We recommend that you only use the transport functions of Change Request Management.
I guess if you select single, the tp shoulds stay in the Q?
can you check this config? -
Import request automatic in version ECC 6.0
Hi,
Now we are planning to do automatic transport from dev to qas. what is the meaning of automatic transport? How can i set this in my landscape.
STMS route is dev-qas-prd .Please give me your valuable ideas.
My Operational System is Unix and database DB2.
ThanksHai,
The best way to automate transports is to write UNIX scripts and schedule them using crontabs.
This will help to import requests to specified clients whenever you release a request in DEV system.
Doing automatic import into QAS is acceptable. For importing into PROD systems it is better you do it since some request can be critical to business and should be done after office hours.
Regards,
Yoganand.V -
Mailbox Import Request Looping Transient Error
Created a Mailbox Import Request with the following command:
New-MailboxImportRequest -BatchName "Import3" -Mailbox "JCool" -BadItemLimit 50 -LargeItemLimit 50 -FilePath "\\EX1\Export\1\Stage_1_2\JCool.pst"
The limits for my send and receive connectors are set to 50MB. But I included the LargeItemLimit paramter in my command because I don't care to import messages larger than that. My hopes were that it would just skip over the items.
My import gets to the point where it hits a large attachment and then the following happens:
5/1/2014 3:32:05 PM [EX1] A large item was encountered: Item (IPM.Note)
Subject:"Emailing: 5.24.12.zip", Size: 153.7 MB (161,185,266 bytes),
Folder:"Sent Items"
5/1/2014 3:32:05 PM [EX1] Transient error
MessageSubmissionExceededException has occurred. The system will retry (1/60).
It does this over and over again until it eventually fails. Will I need to to filter these large attachments from my export, or is there something else wrong?
Here's a portion of the report:
RunspaceId : b6415f46-7235-45af-ad64-d745ef6357a4
Name : MailboxImport
Status : InProgress
StatusDetail : TransientFailure
SyncStage : CopyingMessages
Flags : IntraOrg, Pull
RequestStyle : IntraOrg
Direction : Pull
Protect : False
Priority : Normal
WorkloadType : Local
Suspend : False
FilePath : \\EX1\Export\1\Stage_1_2\JCool.pst
ContentCodePage :
SourceRootFolder :
TargetAlias : JCool
TargetIsArchive : False
TargetExchangeGuid : 8c929261-1e89-4ddc-a1b1-0facf8b99d9f
TargetRootFolder :
RecipientTypeDetails : UserMailbox
TargetVersion : Version 15.0 (Build 847.0)
TargetDatabase : Mailbox Database 0557423074
TargetServer : EX1.contoso.com
TargetMailboxIdentity : contoso.com/Joe Cool
IncludeFolders : {}
ExcludeFolders : {}
ExcludeDumpster : False
ConflictResolutionOption : KeepSourceItem
AssociatedMessagesCopyOption : Copy
BatchName : Import3
BadItemLimit : 50
BadItemsEncountered : 0
LargeItemLimit : 50
LargeItemsEncountered : 2
QueuedTimestamp : 5/1/2014 3:31:36 PM
StartTimestamp : 5/1/2014 3:31:50 PM
LastUpdateTimestamp : 5/1/2014 3:47:25 PM
CompletionTimestamp :
SuspendedTimestamp :
OverallDuration : 00:16:07
TotalSuspendedDuration :
TotalFailedDuration :
TotalQueuedDuration : 00:00:10
TotalInProgressDuration : 00:15:57
TotalStalledDueToCIDuration :
TotalStalledDueToHADuration :
TotalStalledDueToMailboxLockedDuration :
TotalStalledDueToReadThrottle :
TotalStalledDueToWriteThrottle :
TotalStalledDueToReadCpu :
TotalStalledDueToWriteCpu :
TotalStalledDueToReadUnknown :
TotalStalledDueToWriteUnknown :
TotalTransientFailureDuration : 00:13:43
TotalIdleDuration :
MRSServerName : EX1.contoso.com
EstimatedTransferSize : 316.9 MB (332,309,678 bytes)
EstimatedTransferItemCount : 2684
BytesTransferred : 1.52 GB (1,632,133,296 bytes)
BytesTransferredPerMinute :
ItemsTransferred : 48
PercentComplete : 99
CompletedRequestAgeLimit : 30.00:00:00
PositionInQueue :
InternalFlags : None
FailureCode :
FailureType :
FailureSide :
Message :
FailureTimestamp :
IsValid : True
ValidationMessage :
OrganizationId :
RequestGuid : 3f783ec0-abc3-4445-9cf3-105394533bbb
RequestQueue : Mailbox Database 0557423074
Identity : be09db7f-d593-4a08-9afd-f670e0e9e285\3f783ec0-abc3-4445-9cf3-105394533bbb
DiagnosticInfo :
Report : 5/1/2014 3:31:34 PM [EX1] 'contoso.com/Users/Administrator' created
request.
5/1/2014 3:31:48 PM [EX1] The Microsoft Exchange Mailbox Replication
service 'EX1.contoso.com' (15.0.847.31 caps:03FF) is examining the
request.
5/1/2014 3:31:50 PM [EX1] Connected to target mailbox 'Primary
(8c929261-1e89-4ddc-a1b1-0facf8b99d9f)', database 'Mailbox Database
0557423074', Mailbox server 'EX1.contoso.com' Version 15.0 (Build 847.0).
5/1/2014 3:31:50 PM [EX1] Sync state for request
3f783ec0-abc3-4445-9cf3-105394533bbb is null.
5/1/2014 3:31:50 PM [EX1] Request processing started.
5/1/2014 3:31:50 PM [EX1] Stage: CreatingFolderHierarchy. Percent
complete: 5.
5/1/2014 3:31:52 PM [EX1] Merge initialized for mailbox 'Primary
(8c929261-1e89-4ddc-a1b1-0facf8b99d9f)': 43 folders total. Estimated data
size: 2684 items, 316.9 MB (332,309,678 bytes).
5/1/2014 3:31:52 PM [EX1] Stage: CopyingMessages. Percent complete: 10.
5/1/2014 3:31:52 PM [EX1] Copy progress: 0/2684 messages, 0 B (0
bytes)/316.9 MB (332,309,678 bytes), 0/0 folders completed.
5/1/2014 3:31:52 PM [EX1] Merging folder '/Top of Information Store
[IpmSubtree]' into '/Top of Information Store [IpmSubtree]'.
5/1/2014 3:31:52 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:52 PM [EX1] Stage: CopyingMessages. Percent complete: 10.
5/1/2014 3:31:52 PM [EX1] Copy progress: 0/2684 messages, 0 B (0
bytes)/316.9 MB (332,309,678 bytes), 0/0 folders completed.
5/1/2014 3:31:52 PM [EX1] Merging folder '/Top of Information
Store/Deleted Items' into '/Top of Information Store/Deleted Items
[DeletedItems]'.
5/1/2014 3:31:55 PM [EX1] Copying 1 items, 14.57 MB (15,274,357 bytes).
Skipping 1653 items, 99.89 MB (104,738,697 bytes).
5/1/2014 3:31:58 PM [EX1] A large item was encountered: Item (IPM.Note)
Subject:"FW: Board Packet", Size: 14.57 MB (15,274,357 bytes),
Folder:"Deleted Items"
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information
Store/Deleted Items/Attas' into '/Top of Information Store/Deleted
Items/Attas'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information Store/2013
Reviews' into '/Top of Information Store/2013 Reviews'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information Store/AED'
into '/Top of Information Store/AED'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information Store/ASTS'
into '/Top of Information Store/ASTS'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information
Store/Attas' into '/Top of Information Store/Attas'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information Store/Auto
Logs' into '/Top of Information Store/Auto Logs'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information Store/Auto
Logs/2012' into '/Top of Information Store/Auto Logs/2012'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information Store/Auto
Logs/2013' into '/Top of Information Store/Auto Logs/2013'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information Store/Auto
Logs/2014' into '/Top of Information Store/Auto Logs/2014'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 6
items, 917 KB (938,966 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information
Store/bisys' into '/Top of Information Store/bisys'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 24
items, 1.64 MB (1,719,360 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information
Store/Business Contacts' into '/Top of Information Store/Business Contacts'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 1
items, 272 KB (278,548 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information
Store/Conversation Action Settings' into '/Top of Information
Store/Conversation Action Settings [ConversationActionSettings]'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information Store/Count
Me In' into '/Top of Information Store/Count Me In'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information
Store/Drafts' into '/Top of Information Store/Drafts [Drafts]'.
5/1/2014 3:31:58 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 2
items, 23.15 KB (23,707 bytes).
5/1/2014 3:31:58 PM [EX1] Merging folder '/Top of Information
Store/Inbox' into '/Top of Information Store/Inbox [Inbox]'.
5/1/2014 3:31:59 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 90
items, 21.01 MB (22,031,352 bytes).
5/1/2014 3:31:59 PM [EX1] Merging folder '/Top of Information
Store/Jeanette' into '/Top of Information Store/Jeanette'.
5/1/2014 3:31:59 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 2
items, 31.78 KB (32,547 bytes).
5/1/2014 3:31:59 PM [EX1] Merging folder '/Top of Information Store/News
Feed' into '/Top of Information Store/News Feed'.
5/1/2014 3:31:59 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:59 PM [EX1] Merging folder '/Top of Information Store/OHIO'
into '/Top of Information Store/OHIO'.
5/1/2014 3:31:59 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 1
items, 12.45 KB (12,748 bytes).
5/1/2014 3:31:59 PM [EX1] Merging folder '/Top of Information
Store/Outbox' into '/Top of Information Store/Outbox [Outbox]'.
5/1/2014 3:31:59 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:59 PM [EX1] Merging folder '/Top of Information
Store/Performance Review' into '/Top of Information Store/Performance Review'.
5/1/2014 3:31:59 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 1
items, 11.41 KB (11,681 bytes).
5/1/2014 3:31:59 PM [EX1] Merging folder '/Top of Information Store/Quick
Step Settings' into '/Top of Information Store/Quick Step Settings'.
5/1/2014 3:31:59 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:59 PM [EX1] Merging folder '/Top of Information
Store/Required Postings' into '/Top of Information Store/Required Postings'.
5/1/2014 3:31:59 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:59 PM [EX1] Merging folder '/Top of Information Store/Sage'
into '/Top of Information Store/Sage'.
5/1/2014 3:31:59 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:59 PM [EX1] Merging folder '/Top of Information
Store/Schedule As' into '/Top of Information Store/Schedule As'.
5/1/2014 3:31:59 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:31:59 PM [EX1] Merging folder '/Top of Information Store/Sent
Items' into '/Top of Information Store/Sent Items [SentItems]'.
5/1/2014 3:32:00 PM [EX1] Copying 1 items, 153.7 MB (161,185,266 bytes).
Skipping 297 items, 22.47 MB (23,566,533 bytes).
5/1/2014 3:32:05 PM [EX1] A large item was encountered: Item (IPM.Note)
Subject:"Emailing: 5.24.12.zip", Size: 153.7 MB (161,185,266 bytes),
Folder:"Sent Items"
5/1/2014 3:32:05 PM [EX1] Transient error
MessageSubmissionExceededException has occurred. The system will retry (1/60).
5/1/2014 3:32:38 PM [EX1] The Microsoft Exchange Mailbox Replication
service 'EX1.contoso.com' (15.0.847.31 caps:03FF) is examining the
request.
5/1/2014 3:32:39 PM [EX1] Connected to target mailbox 'Primary
(8c929261-1e89-4ddc-a1b1-0facf8b99d9f)', database 'Mailbox Database
0557423074', Mailbox server 'EX1.contoso.com' Version 15.0 (Build 847.0).
5/1/2014 3:32:39 PM [EX1] ICS sync state for request
3f783ec0-abc3-4445-9cf3-105394533bbb is null.
5/1/2014 3:32:39 PM [EX1] Request processing started.
5/1/2014 3:32:39 PM [EX1] Stage: CreatingFolderHierarchy. Percent
complete: 5.
5/1/2014 3:32:39 PM [EX1] Merge initialized for mailbox 'Primary
(8c929261-1e89-4ddc-a1b1-0facf8b99d9f)': 43 folders total. Estimated data
size: 2684 items, 316.9 MB (332,309,678 bytes).
5/1/2014 3:32:39 PM [EX1] Stage: CopyingMessages. Percent complete: 99.
5/1/2014 3:32:39 PM [EX1] Copy progress: 2079/2684 messages, 314.5 MB
(329,813,762 bytes)/316.9 MB (332,309,678 bytes), 0/0 folders completed.
5/1/2014 3:32:39 PM [EX1] Merging folder '/Top of Information Store
[IpmSubtree]' into '/Top of Information Store [IpmSubtree]'.
5/1/2014 3:32:39 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:39 PM [EX1] Stage: CopyingMessages. Percent complete: 10.
5/1/2014 3:32:39 PM [EX1] Copy progress: 0/2684 messages, 0 B (0
bytes)/316.9 MB (332,309,678 bytes), 0/0 folders completed.
5/1/2014 3:32:39 PM [EX1] Merging folder '/Top of Information
Store/Deleted Items' into '/Top of Information Store/Deleted Items
[DeletedItems]'.
5/1/2014 3:32:40 PM [EX1] Copying 1 items, 14.57 MB (15,274,357 bytes).
Skipping 1653 items, 99.89 MB (104,738,697 bytes).
5/1/2014 3:32:41 PM [EX1] A large item was encountered: Item (IPM.Note)
Subject:"FW: Board Packet", Size: 14.57 MB (15,274,357 bytes),
Folder:"Deleted Items"
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information
Store/Deleted Items/Attas' into '/Top of Information Store/Deleted
Items/Attas'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/2013
Reviews' into '/Top of Information Store/2013 Reviews'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/AED'
into '/Top of Information Store/AED'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/ASTS'
into '/Top of Information Store/ASTS'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information
Store/Attas' into '/Top of Information Store/Attas'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/Auto
Logs' into '/Top of Information Store/Auto Logs'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/Auto
Logs/2012' into '/Top of Information Store/Auto Logs/2012'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/Auto
Logs/2013' into '/Top of Information Store/Auto Logs/2013'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/Auto
Logs/2014' into '/Top of Information Store/Auto Logs/2014'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 6
items, 917 KB (938,966 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information
Store/bisys' into '/Top of Information Store/bisys'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 24
items, 1.64 MB (1,719,360 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information
Store/Business Contacts' into '/Top of Information Store/Business Contacts'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 1
items, 272 KB (278,548 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information
Store/Conversation Action Settings' into '/Top of Information
Store/Conversation Action Settings [ConversationActionSettings]'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/Count
Me In' into '/Top of Information Store/Count Me In'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information
Store/Drafts' into '/Top of Information Store/Drafts [Drafts]'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 2
items, 23.15 KB (23,707 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information
Store/Inbox' into '/Top of Information Store/Inbox [Inbox]'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 90
items, 21.01 MB (22,031,352 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information
Store/Jeanette' into '/Top of Information Store/Jeanette'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 2
items, 31.78 KB (32,547 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/News
Feed' into '/Top of Information Store/News Feed'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/OHIO'
into '/Top of Information Store/OHIO'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 1
items, 12.45 KB (12,748 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information
Store/Outbox' into '/Top of Information Store/Outbox [Outbox]'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information
Store/Performance Review' into '/Top of Information Store/Performance Review'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 1
items, 11.41 KB (11,681 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/Quick
Step Settings' into '/Top of Information Store/Quick Step Settings'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information
Store/Required Postings' into '/Top of Information Store/Required Postings'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/Sage'
into '/Top of Information Store/Sage'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information
Store/Schedule As' into '/Top of Information Store/Schedule As'.
5/1/2014 3:32:42 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:32:42 PM [EX1] Merging folder '/Top of Information Store/Sent
Items' into '/Top of Information Store/Sent Items [SentItems]'.
5/1/2014 3:32:42 PM [EX1] Copying 1 items, 153.7 MB (161,185,266 bytes).
Skipping 297 items, 22.47 MB (23,566,533 bytes).
5/1/2014 3:32:44 PM [EX1] A large item was encountered: Item (IPM.Note)
Subject:"Emailing: 5.24.12.zip", Size: 153.7 MB (161,185,266 bytes),
Folder:"Sent Items"
5/1/2014 3:32:44 PM [EX1] Transient error
MessageSubmissionExceededException has occurred. The system will retry (1/60).
5/1/2014 3:33:19 PM [EX1] The Microsoft Exchange Mailbox Replication
service 'EX1.contoso.com' (15.0.847.31 caps:03FF) is examining the
request.
5/1/2014 3:33:19 PM [EX1] Connected to target mailbox 'Primary
(8c929261-1e89-4ddc-a1b1-0facf8b99d9f)', database 'Mailbox Database
0557423074', Mailbox server 'EX1.contoso.com' Version 15.0 (Build 847.0).
5/1/2014 3:33:19 PM [EX1] ICS sync state for request
3f783ec0-abc3-4445-9cf3-105394533bbb is null.
5/1/2014 3:33:20 PM [EX1] Request processing started.
5/1/2014 3:33:20 PM [EX1] Stage: CreatingFolderHierarchy. Percent
complete: 5.
5/1/2014 3:33:20 PM [EX1] Merge initialized for mailbox 'Primary
(8c929261-1e89-4ddc-a1b1-0facf8b99d9f)': 43 folders total. Estimated data
size: 2684 items, 316.9 MB (332,309,678 bytes).
5/1/2014 3:33:20 PM [EX1] Stage: CopyingMessages. Percent complete: 99.
5/1/2014 3:33:20 PM [EX1] Copy progress: 2079/2684 messages, 314.5 MB
(329,813,762 bytes)/316.9 MB (332,309,678 bytes), 0/0 folders completed.
5/1/2014 3:33:20 PM [EX1] Merging folder '/Top of Information Store
[IpmSubtree]' into '/Top of Information Store [IpmSubtree]'.
5/1/2014 3:33:20 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:20 PM [EX1] Stage: CopyingMessages. Percent complete: 10.
5/1/2014 3:33:20 PM [EX1] Copy progress: 0/2684 messages, 0 B (0
bytes)/316.9 MB (332,309,678 bytes), 0/0 folders completed.
5/1/2014 3:33:20 PM [EX1] Merging folder '/Top of Information
Store/Deleted Items' into '/Top of Information Store/Deleted Items
[DeletedItems]'.
5/1/2014 3:33:21 PM [EX1] Copying 1 items, 14.57 MB (15,274,357 bytes).
Skipping 1653 items, 99.89 MB (104,738,697 bytes).
5/1/2014 3:33:22 PM [EX1] A large item was encountered: Item (IPM.Note)
Subject:"FW: Board Packet", Size: 14.57 MB (15,274,357 bytes),
Folder:"Deleted Items"
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information
Store/Deleted Items/Attas' into '/Top of Information Store/Deleted
Items/Attas'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/2013
Reviews' into '/Top of Information Store/2013 Reviews'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/AED'
into '/Top of Information Store/AED'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/ASTS'
into '/Top of Information Store/ASTS'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information
Store/Attas' into '/Top of Information Store/Attas'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/Auto
Logs' into '/Top of Information Store/Auto Logs'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/Auto
Logs/2012' into '/Top of Information Store/Auto Logs/2012'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/Auto
Logs/2013' into '/Top of Information Store/Auto Logs/2013'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/Auto
Logs/2014' into '/Top of Information Store/Auto Logs/2014'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 6
items, 917 KB (938,966 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information
Store/bisys' into '/Top of Information Store/bisys'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 24
items, 1.64 MB (1,719,360 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information
Store/Business Contacts' into '/Top of Information Store/Business Contacts'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 1
items, 272 KB (278,548 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information
Store/Conversation Action Settings' into '/Top of Information
Store/Conversation Action Settings [ConversationActionSettings]'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/Count
Me In' into '/Top of Information Store/Count Me In'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information
Store/Drafts' into '/Top of Information Store/Drafts [Drafts]'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 2
items, 23.15 KB (23,707 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information
Store/Inbox' into '/Top of Information Store/Inbox [Inbox]'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 90
items, 21.01 MB (22,031,352 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information
Store/Jeanette' into '/Top of Information Store/Jeanette'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 2
items, 31.78 KB (32,547 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/News
Feed' into '/Top of Information Store/News Feed'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/OHIO'
into '/Top of Information Store/OHIO'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 1
items, 12.45 KB (12,748 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information
Store/Outbox' into '/Top of Information Store/Outbox [Outbox]'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information
Store/Performance Review' into '/Top of Information Store/Performance Review'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 1
items, 11.41 KB (11,681 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/Quick
Step Settings' into '/Top of Information Store/Quick Step Settings'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information
Store/Required Postings' into '/Top of Information Store/Required Postings'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/Sage'
into '/Top of Information Store/Sage'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information
Store/Schedule As' into '/Top of Information Store/Schedule As'.
5/1/2014 3:33:22 PM [EX1] Copying 0 items, 0 B (0 bytes). Skipping 0
items, 0 B (0 bytes).
5/1/2014 3:33:22 PM [EX1] Merging folder '/Top of Information Store/Sent
Items' into '/Top of Information Store/Sent Items [SentItems]'.
5/1/2014 3:33:23 PM [EX1] Copying 1 items, 153.7 MB (161,185,266 bytes).
Skipping 297 items, 22.47 MB (23,566,533 bytes).
5/1/2014 3:33:24 PM [EX1] A large item was encountered: Item (IPM.Note)
Subject:"Emailing: 5.24.12.zip", Size: 153.7 MB (161,185,266 bytes),
Folder:"Sent Items"
5/1/2014 3:33:24 PM [EX1] Transient error
MessageSubmissionExceededException has occurred. The system will retry (1/60).
ObjectState : NewHi kopas,
Please filter these large attachments from the export just as you said for testing.
Feel free to contact me if there is any problem.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
Hi Experts,
I created one transport request for my cube and i realesed, now my request is ready to import in Quality. Before Basis team working on this in STMS, now i need to do this?
So can any one give me step by step process in Quality or give me doc if any?
Thanks
DavidRun TCode :stms
Click on import overview (TRUCK) symbol in the top corner first one.
it will display the landscape system which are connected in your environment.
double click on Quality server (into which you want to import)
It will display all the TRs which are ready and which are already ported to Quality success fully and with failures and which are ready to be ported.
on the top Click on "Adjust Import Queue"
Bottom you will find your transport request with an Arrow mark beside it.
select the Transport request --> click on import request (TRUCK in greay color)
A window will be prompted asking for date execution and other options like
Over write originals
Over write objects in unconfirmed repair
Note:
here in the options tab we will select first 4 options if the Transport are not new and fresh one.
Click on Yes(to start import)
While importing the transport request you will get a Truck (red colcor) sysmbol beside your request.
Once after import is done the status will change to yellow color
Regards
KP -
Error while importing request from DEV to PROD
Dear Experts,
i am having the problems with request no.. There are two transport request nos and these have to be transported
from DEV to PROD. I relesed these two but while importing into PROD showing everthing completed successfully
with one error and error is Generation or programs and screens for both transport requests .
I am just enable to understand what this message is for ..
Please someone help me out in this....
with regards.
Praveen.
Moderator message: please search for available information/documentation before asking, read the detailed transport logs, correct the errors, try again.
Edited by: Thomas Zloch on Dec 13, 2010 6:05 PMHi,
First check the source system: ZSTGLDV110 is exists or not. check the rfc connections (Also check the source system assignment in both the system to each other). check the settings in the stms tcode. check the suppoet pack on your quality system,.... there are plenty of reasons.
thanks. -
Issue in Importing request from Quality to Production
Hi Experts,
I have a request which is successfully imported to ECC Quality system. I have collected the 'Customer Exits, Functional Module, Function Groups' in this request. I am getting the following error when I try to open the Function module in se37 in the Production system after the Import Process.
Function group ZRSAX contains errors
So, Kindly help me resolve this issue.
Thanks in advance !!!!
Regards,
Gokulkumar RDHi Gokulkumar,
This message is FL(023).
Please try to open the include report "zrsaxuxx" in tr-code SE38.
After translated by Google:
* Not for external call, for example, by rsfufill ...
* Not even when you delete, because the bodies have gone
* There is intercepted outside
* Error in UXX how shall he completed while generating
For German
* Nicht beim externen Aufruf z.B. durch rsfufill...
* Auch nicht beim Löschen, da müssen die Leichen weg
* Dort wird außerhalb abgefangen
* Fehler im UXX wie soll er beim Generieren abge
Hope it is helpful to you.
Regards
Maybe you are looking for
-
Quicktime plugin for screen capture does not work in flash player 11.2
Hello, I have created a quicktime plugin (it is .component file) for screen sharing purpose. I have used quicktime framework for that. plugin is detected in flash player. This plugin is working perfectly for flash player 11 and below.B
-
Required Fields in a block?
I am creating a sign in sheet using Livecycle. I want to make certain fields required if the user starts filling in that block of fields. This is what it looks like: First Name Last Name Email Degree Address City, State, Zip First Name Last Name Ema
-
QA11 put from stock in quality to unrestricted use??
Hi everybody I have a problem with stock in quality control because of Quality Management. I would like to put it in unrestricted use, but I can't because the material need an inspection plan. And I don't want to create him an inspection plan, becau
-
Paper settings in PSCC pare greyed out and cannot be selected.
Hi Everyone! I'm running OS 10.10.2 and PhotoshopCC. In the printer settings when printing directly out of photoshop (I've updated Epson Stylus Photo R2000 driver today) most of the paper settings are greyed out and cannot be selected. I know wI'm
-
Software Install DVDs iMac G5 1.9 & 2.1GHz
I just realised that the Mac OS X install software that came with 2 different iMac G5 (2.1 & 1.9GHz) are not the same versions. Question: will it be a problem using the software of the 1.9GHz on the 2.1GHz and vise versa? Problem is I am not sure whi