Import Restricton in 10G Exp Edition?
Dear Gurus,
I have to ask are there any restrictions on Oracle 10g Express Edition with respect to Imp utility.
Because i'm importing data from an Oracle Dump file (*Full database*) into 10g Express Edition. But i remain un-successfull.
While i can import data from the same Dump file(User/Table) into 10g Express Edition.
Any idea.
Tubby,
Thanks for asking about said problem.
Actually i can Import data (User level and table level ONLY) from the *.dmp file.
But i am unable to Import Whole database?
I want whole DATABASE IMPORT from this *.dmp file.
I would be realy grateful if someone can help me in this problem.
H_innocent
...
Similar Messages
-
I want to Install 10g exp edition on my pc having
192mb Ram and 20gb Harddisk 700mhz processer intel celeron.
can any body help me in installing this as its giving err saying
that minimum ram req is 256mb.
If i install 9i than my system will slow down much... I only want it for
learning sql and plsql.
Thanks
aak.your same post has already been answered to you two times before, and this is the third:
10g exp edition
RAM requirment for Oracle 10g XE(Express Edition)
In a forum it is not a good code of conduct to repeat several times the same question, overall if what you'll obtain is the same answer. -
Import/export in 10g express edition
hi all,
my application was runing in win2000server and 8i oracle. now i want to change to xp with 10g express edition.
i am geting error while importing data of 8i exported file in to 10g ED (as error 12899).it is missing the data while importing.
my data contain arabic charchters.
please help outORA-12899: value too large for column string (actual: string, maximum: string)
It breaks out character sets conversion from arabic to unicode. It needs
more length than arabic.
Can you create tables on Oracle10g XE before importing?
Oracle8i Oracle10g
CHAR(N) CHAR(N char)
VARCHAR2(N) VARCHAR2(N char) -
Can I import a tablespace into Oracle 10g Express Edition
I am very new to Oracle 10g Express Edition. We have a server running Oracle Enterprise Edition and we have been creating a transportable tablespace to be imported into a few servers. This works fine for us. I would like to find out if I can import the tablespace into Oracle 10g Express Edition. Someone told me that I should be able to do that but I have no clue to how to do it. If this is possible, can someone tell where to find the information how to do this.
Thanks,
RJI finally tried it and I got the following errors:
IMP-00017: following statement failed with ORACLE error 721:
"BEGIN sys.dbms_plugts.checkCompType('COMPATSG','10.2.0.2.0'); END;"
IMP-00003: ORACLE error 721 encountered
ORA-00721: changes by release 10.2.0.2.0 cannot be used by release 10.2.0.1.0
ORA-06512: at "SYS.DBMS_PLUGTS", line 2004
ORA-06512: at line 1
IMP-00000: Import terminated unsuccessfully
Am I right that the server that I exported the tablespace is using Oracle 10.2.0.2.0 while Oracle Express is 10.2.0.1.0? I looked around and I did not see Oracle Express version 10.2.0.2.0 that I can download. Is there a patch or something to upgrade it?
Thanks,
RJ -
Error occure while importing data from 9i enterprise to 10g Express Edition
Hi,
Iam trying to import data from Oracle 9i(9.2.0.1.0) Enterprise Edition to Oracle 10g Express Edition ,
non partitioned tables are imported successfully but partitioned tables are not imported.I got the following error message.
IMP-00017:following statement failed with oracle error 439.
IMP-00003:Oracle error 439 encountered.
ORA-00439:feature not enabled:partitioning.
Plz help me to solve above error.i am sorry the errors are
imp-00019
imp-00003
ora-12899
i am using database 10g express universal edition
in 9i
select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET AR8MSWIN1256
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 9.0.1.1.1
but in 10g express universal edition
select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET AL32UTF8
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0 -
Oracle 10G Express Edition backup issues
After a backup job is run on our Oralce 10g Express Edition Server our system users can't access their web login page -
http://127.0.0.1:8080/apex - To access their databse.
What i need to know is this.
I do a daily backup of the Oracle DB manually, the one that comes with express edition, but when the backup is comple users can't access the afforementioned web address as i have stated
1 - Does anyone know what can be causing this?
2 - When i backup the database manually where does the database actually backup to?
3 - I was thinking of backing up the Oralce DB manually usning XE's own backup then running Symatec backup Software to backup this file.In the event of a system crash i could then simply restore the operating system (windows 2003), reinstall XE and import the file i had backedup with XE . Does this sound like a good solutionNo idea why users cant access the login page, maybe trying to post on XE forum Oracle Database Express Edition (XE) may help for this.
But you may use Rman with XE, it is a best practice for Oracle B&R and it is easy to control the backup destination with Rman - http://download.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/backrest.htm#sthref414
Also these demos may help - http://psoug.org/reference/rman_demos.html
Best regards. -
An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit
Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PMHi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath -
What we actually doing with oracle 10g Express Edition???
Hi all,
i'm a housewife.... i like to work on oracle which is very new to me.... so i recently downloaded "oracle 10g Express Edition" from oracle.com....
i got
run sql commamd line
get started
backup database
start database
stopdatabase
go to database homepage
why those all above???? how i can practice myself on exp' edition???.... actually what the s/w engineers do with express edition???
i follow the instructions given for get started....
i can view sometables which already exist....
what is the use with that.....i don't have any idea when work with get started.....i just follow the instruction given on help and create a table....
what is the actual use of express edition???Hi,
10g express edition (XE) is free database version of 10g. Application Express (Apex) is already installed to it.
Apex version that comes with XE is 2.1.
You can upgrade it to version 3.2.1 witch is latest one. New version of Apex comes with some nice features like interactive reports.
If you have installed XE you are ready to go developer Apex applications and practice Oracle database
Edit:
http://www.oracle.com/technology/products/database/application_express/html/apex_and_xe.html
Br, Jari
Edited by: jarola on Aug 31, 2009 7:48 AM -
Oracle Client 10g Express Edition (ADO, C++, Visual Studio 2008)
OS: Windows XP SP2
I made a test programm allowing to work with Oracle 10g Express Edition. Connection with server works, commands are followed, but at the exit from function wmain Visual Studio it buzzez (слышал такое, если нет, то посмотри по другому словарю?) for some time (around 5 minutes) and module mistake crt0dat.arises in __crtExitProcess. function.
You can have a look at the mistake here: http://img365.imageshack.us/img365/2125/oravssi1.jpg
Where the mistake can be?
Connections with MSSQL и MySQL servers work without problems with the stated algorithm.
#ifndef _WIN32_WINNT
#define _WIN32_WINNT 0x0501
#endif
#include <Windows.h>
#ifdef _DEBUG
#define _CRTDBG_MAP_ALLOC
#include <crtdbg.h>
#else
#define _RPTW0
#define _RPTW1
#define _CRT_ERROR 1
#endif
#import "c:\Program Files\Common Files\system\ado\msado15.dll" no_namespace rename("EOF", "EndOfFile")
INT wmain(INT iArgC, PWCHAR pwcArgV[])
// COM init
if (S_OK != CoInitializeEx(NULL, COINIT_MULTITHREADED))
_RPTW0(_CRT_ERROR, L"CoInitialize");
return -1;
// DB connect
_ConnectionPtr pCnn;
while (TRUE)
if (S_OK != pCnn.CreateInstance(__uuidof(Connection)))
_RPTW0(_CRT_ERROR, L"pCnn.CreateInstance");
break;
try
_bstr_t strCnn(L"DRIVER={Oracle in XEClient};dbq=PORTAL:1521/XE;uid=zorkey;pwd=******;");
pCnn->Open(strCnn, L"", L"", adConnectUnspecified);
catch (_com_error& e)
_RPTW1(_CRT_ERROR, L"pCnn->Open (%s)", e.Description().GetBSTR());
try
//pCnn->Execute(L"INSERT INTO ZORKEY_COMPUTER(COMPUTERID, COMPUTERNAME) VALUES(2, 'TEST')", NULL, adConnectUnspecified);
catch (_com_error& e)
_RPTW1(_CRT_ERROR, L"pCnn->Execute (%s)", e.Description().GetBSTR());
if (adStateOpen != pCnn->GetState())
break;
break;
// DB close
if (NULL != pCnn)
if (adStateClosed != pCnn->GetState())
pCnn->Close();
pCnn.Release();
CoUninitialize();
return 0;
}Formatted code can be seen at http://rafb.net/p/Rvz1wL74.htmlYou are right. You should use OCCI 11g to work with VS2008. Download the compatible libraries from here: http://www.oracle.com/technology/tech/oci/occi/occidownloads.html
-
Backing up all data and objects of Oracle 10g Express Edition...
Hi,
I have tables, packages, views, procedures, etc. in Oracle 10g Express Edition, running on Windows XP. I would like to create a backup of the complete database (objects, relationships, all data, etc) into a file that I can restore in case the database crashes.
What do I do?
Thanks.markk2 wrote:
I am actually using it for Production. Yes, I would need objects and data.I would suggest to look at the Standard Edition as well if you are using it for production.
Is there a way to backup everything without data and then backup everything with data? Also, is there a way to restore everything without data and then restore everything with data?What's the meaning of "backup everything withiut data" and "then backup everything with data" ? The data is in the tables alone. The rest of the objects are not containing data but are using it, be it views, procedures etc. There is no such restore like without data. Without data, all what you would be getting would be structures of the tables which is going to be of no use. The export/import tool, is a simple tool which can put the tables (and other objects as well) along with their data in your dumpfile . In the situation of loss of a table, you can do an import from that dump file and you can restore the table back(with or without data, depends on the choice of yours while running Import command) . But this is just going to be a logical recovery of the object(s). For a complete database, it's better to use RMAN which would copy the datafiles and keep it with itself. Later, when you have a crash, you can restore those files to get teh database recovered. But if you want complete security, its better to put your db in the archive log and then do the backup along with the archive log files.
HTH
Aman....
How to do this exactly? Thanks! -
Silent Installation Of Oracle 10g Expression Edition
Plz i need information about how to install Oracle 10g Expression Edition silently on multiple computer.....i get this script from Oracle site:
** Response file to perform silent install of Oracle Database 10g Express Edition **
** Values for the following variables are configurable: **
** szDir - Provide a valid path **
** TNSPort - Provide any valid available port number **
** MTSPort - Provide any valid available port number **
** HTTPPort - Provide any valid available port number **
** SYSPassword - Provide a valid password string **
** bOpt1 - 1 or 0 : 1 launches the Database Homepage at end of install and 0 doesn't **
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-DlgOrder]
Dlg0={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdWelcome-0
Count=9
Dlg1={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdLicense2Rtf-0
Dlg2={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdComponentDialog-0
Dlg3={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskTNSPort-13013
Dlg4={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskMTSPort-13012
Dlg5={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskHTTPPort-13014
Dlg3={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskSYSPassword-13011
Dlg4={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdStartCopy-0
Dlg5={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdFinish-1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdWelcome-0]
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdLicense2Rtf-0]
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdComponentDialog-0]
szDir=d:\oraclexe\TEST
Component-type=string
Component-count=1
Component-0=DefaultFeature
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskTNSPort-13013]
TNSPort=1521
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskMTSPort-13012]
MTSPort=2030
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskHTTPPort-13014]
HTTPPort=8080
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskSYSPassword-13011]
SYSPassword=oracle
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdStartCopy-0]
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdFinish-0]
Result=1
bOpt1=1
bOpt2=0
but i need how to link this script into the Setup file.
i urgently need ur help bro.................. let me know if u have some idea to fix this problem.
thz for advance.It is important to define which OS you are working with.
Making a blind guess I will assume your are working on a windows environment (after this file fragment: "Dir=d:\oraclexe\TEST")
In order to perform a silent install on a windows environment you should:
- download the appropriate installation executable - eg. OracleXE.exe
- download one of the silent install response file templates
- edit the template with appropriate values for the install questions
- run the Oracle XE installation and specify the location of the edited response file using a command similar to the following: OracleXE.exe /s /f1"<location of edited response file> /f2"<location of silent install log>
~ Madrid -
Import data from 10g to oracle 9i
hi,
how can i import data fom 10g to 9i R2?Follow this thread :
exp/imp between 10g and 9i
Essentially, you must
1. Install a 9i server or administrative client environment.
2. Configure SQLNet connectivity (tnsnames.ora) to the 10g database.
3. Run exp from the 9i environment, connected to the 10g database.
4. Create a 9i export dump file.
5. Import this into your 9i target database.
If you have different charactersets, you must be mindful of the setting of NLS_LANG in the environment that you run "exp" and "imp" in. -
Help imigrating data from 9i database to 10g express edition
hi all ,
i am trying to import a *.dmp file from 9i to 10g express edition
then problem is that i keep getting during import is
imp-11119
imp-11113
ora-12899
the data being imported is not english , it appears that there is a problem
with importing the data
can someone please help me plzi am sorry the errors are
imp-00019
imp-00003
ora-12899
i am using database 10g express universal edition
in 9i
select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET AR8MSWIN1256
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 9.0.1.1.1
but in 10g express universal edition
select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET AL32UTF8
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0 -
Problem upgrading Apex 2.1 to 3.2.1 in Oracle Database 10g Express Edition
G'Day Apex gurus,
I installed Oracle Database 10g Express edition in my Windows XP PC which comes with Apex 2.1 with no problems. Then I wanted to upgrade Apex 2.1 to 3.2.1 (Currently Apex download in OTN) following the document below:
http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
I went to the steps:
@apexins SYSAUX SYSAUX TEMP /i/
Then to change the password for the admin account run apxchpwd.sql and when prompted enter a password for the ADMIN account.
@apxchpwd
with not problems
Then I connected to SQL*Plus as SYS by:
sqlplus /nolog
CONNECT SYS as SYSDBA
Enter password: xxxxxxxxxxx
but when I tried to run:
@APEX_HOME/apex/apxldimg.sql APEX_HOME
where APEX_HOME is Apex3.2.1 in my case
SQL> @Apex3.2.1/apex/apxldimg.sql Apex3.2.1 (I get the messages below)
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'Apex3.2.1/apex/images'
Directory created.
declare
*+
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the path specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at line 15
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.17
Directory dropped.
Can anyone help me in how to trouble shout this?
I tried to continue by following the steps document
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
but when I tried to login in:
http://localhost:8080/apex/f?p=4550:1
when I type the credentials
system
system
systempassword
nothing happens
or even If I try:
http://localhost:8080/apex/f?p=4550:10
admin
adminpassword
nothing happens here too.
I appreciate any help
Kind regards
CarlosMy database version is 10.2.0.1.0 Oracle express.
Operating system is Windows Vista.
I started installing using the following commands.
@ C:\temp\apex\apexins.sql
it prompts me for the values of sysaux sysaux temp and c:\temp\apex\images\
If I supply the value for images the sqlplus window closes after scrolling a lot of info.
Enroute it also prompts me for a value for 9:
I don't know what the input shall be.
Then it again stops at enter value for version:
I used 3.2.1.0
The window scrols a while and closes.
later I changed the password and ran the command.
@c:\temp\apex\apxldimg.sql c:\temp
but no success with installation.
the output is as following.
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Nov 27 18:13:43 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect system/sairam as sysdba;
Connected.
SQL> @ c:\temp\apex\apxchpwd
Enter a value below for the password for the Application Express ADMIN user.
Enter a password for the ADMIN user []
Session altered.
...changing password for ADMIN
wwv_flow_security.g_security_group_id := 10;
ERROR at line 3:
ORA-06550: line 3, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
ORA-06550: line 3, column 5:
PL/SQL: Statement ignored
ORA-06550: line 4, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_USER' must be declared
ORA-06550: line 4, column 5:
PL/SQL: Statement ignored
ORA-06550: line 5, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 5, column 5:
PL/SQL: Statement ignored
ORA-06550: line 8, column 23:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 7, column 15:
PL/SQL: SQL Statement ignored
ORA-06550: line 13, column 32:
PLS-00364: loop index variable 'C1' use is invalid
ORA-06550: line 12, column 9:
PL/SQL: Statement ignored
ORA-06550: line 19, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 19, column 5:
PL/SQL: Statement ignored
Commit complete.
SQL> @c:\temp\apex\apxldimg.sql c:\temp
PL/SQL procedure successfully completed.
Directory created.
if wwv_flow_utilities.db_version_is_at_least('11') then
ERROR at line 32:
ORA-06550: line 32, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 32, column 3:
PL/SQL: Statement ignored
PL/SQL procedure successfully completed.
if wwv_flow_utilities.db_version_is_at_least('11') then --11g only
ERROR at line 16:
ORA-06550: line 16, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 16, column 3:
PL/SQL: Statement ignored
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.32
Directory dropped.
SQL>
Does this require XE 11 or anything else.
This will happen even if I supply as following(closing of sqlplus in the begining).
@ C:\temp\apex\apexins.sql sysaux sysaux temp c:\temp\apex\images\
Any help. -
How can i create a new database instance in oracle 10g express edition?
hello everybody
i'm a student
i am developing a database application
i'm using oracle 10g express edition
to run my application i need to create another database instance
but i didn't find any option for doing so in that product
if there is pls tell me where it is?
if not pls tell me how to manually create it?
regards,
ChaitanyaChaitanya Babu M wrote:
yaa i'm sure about that .
i want one more instance of database.Can you perhaps explain why? I have a fair share of production and development servers - and not a single one of them needs to run more than one database instance.
So I'm interested in what requirement you are trying to satisfy by using two database instances on a single platform.
Oh yeah - if you want to create a custom XE instance (different SID, different tablespace sizes, more/less PL/SQL stuff installed, hack standard), make a copy of your XE db creation script (in your XE's +$ORACLE_HOME/bin+ and called createdb.sh ) and modify that for your needs.
PS. even with a different SID, only a single XE instance can be run at a time - you can however have 2 different ones defined and then use one at a time (e.g. testing international settings, init param differences, etc.)
Maybe you are looking for
-
Clearing values from a single partition
I have a cube that I load daily with a reload of the weeks data. Data from previously loaded days may change and is brought in via a view (lets say week to date). What I need to be able to do is clear out one or two partitions (weekly) and then reloa
-
Cannot open iTunes after updated to 10.5
I updated from 10.3 to 10.5 yesterday and I can't open itunes at all. when I click iTunes, the message pops up, says 'This iTunes has not been correctly configured' what does that mean? and what should I do?? please reply with a solution!! Thanks
-
Went to apple store bought new mac and hp B210 printer can't get wireless printer to work right all
I cannot get the HP B210 wireless printer to work consistently with my iPHONE 4 or to print consistently from my home mac computer ?
-
Solaris 9/10 How to limit the number of SSH connexion(s) to a server?
Hi team Anybody knows how should I proceed if I want to limit the number of simultanous SSH connexion on my server to 3 for example? I have tried to edit /etc/ssh/sshd_config file and put line: # The maximum number of concurrent unauthenticated conne
-
Do not want to delete exchange email on server (just phone)
I just synched up my new razr maxx to my work exchange server. Problem is, when I delete email on phone, it deletes in on the server - I do not want that, and apparently the android exchange settings do not provide for deleting on the phone only (lik