Import RFC - Help

Hi,
I want to import a BAPI from a R/3 system.
I have created a Software catalog and imported it into Integration Repository, also created a namespace with selecting the option for RFC enabled.
Now when I right click on RFC to import a RFC, I get only one SAP system , which is the XI server with its client.
I need my R/3 system ID and client to appear in this place. How can i do this ?
I have created the R/3 server in both technical system and also business system.
Thanks in advance.
Regards,
Vivek

Hi Vivek,
Have You created Software component in Int. Repository. ?
If not create one software Component.
Than create Software component version.
In software Component version, you are having options for
Importing RFC and IDoc Interfaces
Click the radio button for Importing option.
Than below that there is an option maintaining the Connection data for Import.
Enter the system name and client data here OR you can provide the data while
importing the Interfaces.
Hope this helps.
Regards,
Vijay

Similar Messages

Problem while importing RFC function module in XI. Please Help!

Hi Experts,
           When I try to import RFC function module in XI I get the following error:
             **Ready for import**
Import started...
YCOP_VALIDATE_GR:
+ com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: connection closed without message (CM_NO_DATA_RECEIVED)
Import failed with 1 error
Any idea why is this error? How to resolve this?
Thanks
Gopal

Hi
   The problem still persists.
   This is what I have done:
    1. My FM is RFC enabled. In the "Attribute" tab of the FM I have selected "Remote-enabled module" and "Start immed".
2.Activated and tested the FM.
3.Released the FM. In se37, Function Module -> Release ->Release.
4.Tried to import this FM in XI under "RFC". Get the same error.
I have some questions:
1. After releasing the FM do I have to activate it?
2. In release there is "Internal Release" Do I have to use that?
3.Do I have to do "Internal Release" first then "Release"?
4.The FM i am trying to import makes a call to another FM. Both the FMs are in the same system. Both are remote enabled. The second FM updates data in custom table. the first FM which I am importing validates the data and then calls the second FM for update. Do I have to import both FMs?
Please help me!
Thanks
Gopal

Problem importing RFC/IDOC

Hi All,
While importing RFC/IDOC, there are 3 steps
1. Logon
2. Choose Objects
3. Execute imports
After giving the reqd info in logon, I can go to the next step, but here when I click on RFC or IDOC, I am not able to see the RFCs or IDOCS, IR is not responding, the screen goes blank and I have to close the application(IR).
Any help is appreciated.
Thanks,
Jai Shankar

>>wasn't it 3 that felt like 15 ?
No i guess it is a 15 actually.
>>do you have many Zidoc - ZRFC ?
Yes. This is a IDES system I am connectin to. So lot of them.
Thanks,
Jai Shankar

Problem in Importing RFC from ECQ to XIQ

Hi.....
I have a problem in importing the RFC from ECC Quality Server to PI Quality Server.......
When I fill the fields like
Application Server......
System Number.....
UserName
Password.....
I am getting a screen Problem.....in which error information is given....
One of the error is UserName(XXXX) cannot have access to aii.sap......
Please help me.....
Thanks,
Sudheer

Hi Sudheer,
Kindly check the user having all authorizations which you are try to importing the RFC's from ECQ to XIQ, check with your basis team and try to provide the required authorizations for that particular user.
Then you can able to import RFC's and do the design by activating the objects.
Regards
Venkat Rao .G

Import RFC in java

Hi,
how to import RFC in java?

HI
Friend
Please find out the flowing link..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10c2c440-7f8c-2b10-7db0-dce34360f118
I thing it is very helpful to you..
used for Netweaver 7.0.09 java...and higher versions
Adaptive RFC model
Tanks
Rafi Shaik

Hangs When Import RFC

Hi,
Recently I want to use BAPI in SAP PI 7.1 with EHP 1. when I want import RFC on Imported Object, I got Hang in RFC node.
I just follow SAP Notes [1420787|https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1420787], however no com.sap.aii.ib.client.delayload property in my exchange profile.
Any input please for resolution.
Regards,
Glenn

Hi,
It seems to like basis issue. So, Please contact basis guys to solve your issue. Basis peoples will help you regarding mentioned problem.
Please see the below link, it might be useful to you.
http://help.sap.com/saphelp_nwpi71/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
Regards,
Rajesh

** Not able to Import RFC - RFC to RFC scenario

Hi Friends,
I have created one technical system in SLD which is already configured with XI system. I have created one business system for this technical system.
I have created one SWCV and one namespace. Now, I have tried to import one RFC under 'Imported Objects' in this SWCV by giving proper logon details in the SWCV and Import Objects dialog box. But, the system throws the following error.
Unable to establish connection to R/3 system computer8 (system=00, client=800) Troubleshooting tips:
Is the target system online?
Check the connection data (note that server names and groups are case-sensitive)
Tips for administrators (see the configuration guide for more details):
Does the user have the required authorizations in the target system?
Is the target system configured correctly in "etc/services"?
I have checked the login password, host name, etc. everything is correct.
What could be the problem?
Friends, Kindly help me to solve this issue.
Thanking you.
Kind Regards,
Jegatheeswaran P.

Hi jega,
go to R/3 system and check your Function module weather it is activate or not.
save and activate it.
Also check the connection between XI and R/3.
Re: How to Check the RFC Connection Between R/3 And XI
lost Connection between R3 to XI
Try to import RFC now....
Regards
Biplab
***Reward points if it helps u.

NWDS import RFC interface for the structure issue??

Hi Gurus,
I'm working on the SAP NetWeaver BPM with NWDS 7.3 SP12 rite now and got confused about the RFC interface structure stuff.
I have a mapping activity defined in the process and the receiver interface needs a RFC. So I go to "Process Modeling" -> "Services Interfaces", right click and choose "Import RFC",type the correct RFC/BAPI name connecting with the SAP ECC system. The issue is that when I finished importing the RFC, went to the "Data Types", the RFC interface namespace shows out but the structure shows seperately with individual segment, so the whole nested RFC interface structure messed up in parallel which is incorrect for the data object and output mapping for later process activities.
Anyone has ran into such kind of issue or experience the same, any solution or suggestion?
Thanks in advance,
Rajesh

William,
Another two questions relates to NWDS BPM development:
1. Sometimes after I import the service interface into NWDS, the structure displays differently from it defines in ESR, I mean the fields sequence. I dont know why
2. Refer to your screenshot,
Assume the occurence of node HEADER and item is (0..1), when I want to map a blank constant to them to generate the target structure, the editor not allows and display error which is very different with ESR mapping tool, could you please help to advise? Tons of thanks!
Thanks a lot in advance,
Rajesh

Importing RFC from 4.5B problem

Every one,
I am trying import RFC from 4.5B, I have given all the correct details.
It is giving an error "Problems to reach R/3 System" and connection to XI server is lost and I have to log-in again.
Reg,
-Naveen.
Message was edited by: naveen chitluri
Message was edited by: naveen chitluri

Hello,
Can any one please help me on this?
-Naveen.

Import RFC Model

All,
I'm using Sneak preview full java version. When I try to call SAP Function module from webdynpro Java via RFC Model, it's asking me to specify the SAP Server detail logon information.
Can anyone help me what information i should give becos im using Sneak preview Java version...
Thanks..
BM

Hi Bharathi
If u want to import Adaptive RFC Models from ABAP backend u have two ways for importing the model
1) single server : where u need to specify ABAP system creditials such as Application server name,client,system number for ABAP system available in ur Local Area Network
2) Load Balancing : Here DropDown List is automatically populated with list of ABAP servers which are defined in ur SAP LOGON PAD . Actually NWDS picks up names of these servers from saplogon.ini file which stores all ABAP servers defined in ur SAP LOGON PAD
so if u have entry for the required ABAP backend in ur SAP LOGON PAD then u can go for Load Balancing method in which most of the entries will be automatically populated from saplogon.ini file
If u donot have SAP LOGON PAD or saplogon.ini file doesnot have entry for the ABAP server then u should go for single server mode for Importing RFC models
Hope u Got the difference between the two methods now
Regards
Asif

Import RFC/IDOC error

Hi all,
I am following "How to...push data in to BW from XI."
In the 5th step in the document it is given
Choose "Import RFC/IDOC" in the context menu of "Imported Objects" and enter your user data to logon to the BW system.
Select the function module /BIO/Q16ASENDXMLDATATOBW_RFC
Press "continue"
Press "Start"
But when I do this I am getting a java nullpointer exception error com.sap.aii.ibrep.sbeans.upload.remoteuploadexception:jsva.lang.nullpointerexception
I am using jre1.4.2_10 and java web start version 1.4.2
Please help me in resolving this issue.
Regards,
Aanand

Hi Anand,
Can you pls make sure that no other users have this same RFC imported into your XI integration builder and is waiting to get their change list activated. In that case also we get the error in importing...
check these links also.
Error importing RFC / idoc despite following note 769356
Cheers
JK

Import RFC hangs

I am using JRE 1.4.2.17
There is no problem for importing of Idocs. However when i try to import RFC in the integration repository, the program hangs.
I have
I have cleared the cache as well.
my authorization is SAP_ALL
Any advice from the gurus? Couldnt find any information in the forum.

hi
After a certain period of inactivity user connections with backend are automatically snapped of.Also this happens in case of time outs.
Check the following parameter,
icm/server_port_0
Values should be something like this...
PROT=HTTP,PORT=80$$,TIMEOUT=480,PROCTIMEOUT=480
check this link
http://help.sap.com/saphelp_nw04s/helpdata/en/7b/72092aaa1342c5a3af7ce0b9a11ff9/content.htm
check by connecting to backend from browser and check in txn sm04
note:reward points if solution found helpfull.....
regards
chandrakanth.k

OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!

OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!

Do you get this window when you hold down the Command+Option keys and launch iPhoto?
If not then you're not holding down both keys long enough.
OT

Problem in mapping xml data with imported RFC parameters

I am currently working on a senario in which a flat file is generated by an RFID server and placed in FTP server.
The flat file is picked up from the FTP server using XI and the contents are mapped to the corresponding imported RFC parameters.
The content of the file which is in text format is successfully converted in XML at the XI side.
File contains records of 2 fields Functional location and RFID equipment number . In the R/3 side these fields
are used as Functional location and equipment number of PM module .
The structure of the FTP message is as follows
<ns:RFID_MSG_TYPE xmlns:ns="urn://sisl:rfiddemo">
<RecordSet>
<Row>
 <FL1>"f1</FL1>
 <FL2>01</FL2>
 <FL3>01</FL3>
 <RFID_NUM>I001"</RFID_NUM>
</Row>
</RecordSet>
</ns:RFID_MSG_TYPE>
After the mapping program which maps the above structure to the imported RFC is executed the following payload document is generated
<ns:ZRFID_EQUIP xmlns:ns="urn:sap-com:document:sap:rfc:functions">
<RECORDS>
<item>
 <FLOC>f1-01-01</FLOC>
 <RFID_NO>I001</RFID_NO>
</item>
</RECORDS>
</ns:ZRFID_EQUIP>
The size of FLOC is 30 of type string and RFID_NO is also a string with size 18.
When the data is brought in R/3 both the fields FLOC and RFID_NO gets mapped in FLOC which is of type char30.

Hi Naveen,
In sxmb_moni the content transmitted to the adapter(RFC)is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns:ZRFID_EQUIP xmlns:ns="urn:sap-com:document:sap:rfc:functions">
- <RECORDS>
- <item>
<FLOC>f1-01-01</FLOC>
<RFID_NO>I006</RFID_NO>
</item>
- <item>
<FLOC>f1-01-02</FLOC>
<RFID_NO>I002</RFID_NO>
</item>
- <item>
<FLOC>f1-01-03</FLOC>
<RFID_NO>I003</RFID_NO>
</item>
- <item>
<FLOC>f1-01-04</FLOC>
<RFID_NO>I004</RFID_NO>
</item>
- <item>
<FLOC>f1-01-05</FLOC>
<RFID_NO>I005</RFID_NO>
</item>
- <item>
<FLOC>f1-01-06</FLOC>
<RFID_NO>I001</RFID_NO>
</item>
</RECORDS>
</ns:ZRFID_EQUIP>
At r/3 side the field floc and rfid_no gets mapped to floc which is of char30
eg floc=f1-01-01I006
 rfid_no=

Importing RFC from R/3 3.1i PI 7.0

Hi,
The scenario is picking a file from third party FTP sever and posting an Idoc into SAP R/3 3.1i using PI 7.0. In between we call an RFC from R/3 3.1i from PI 7.0 for converting values. The problem here is, where we tried to import RFC from R/3 3.1i into PI 7.0, its is not allowing to import.It says unauthorized access, even though i had permissions to do that.
1:) Is this a compatible issue?
2:) Can we import RFC from 3.1i into Pi 7.0? Then why i am not able to?
3:) Is there any other way to use that function module in mapping?

Hello
1:) Is this a compatible issue?
- yes
2:) Can we import RFC from 3.1i into Pi 7.0? Then why i am not able to?
- No, this is not supported. The import of RFCs and IDocs is supported from SAP Release 4.0 and higher.
3:) Is there any other way to use that function module in mapping?
- If the RFC is not too complex, just created the objects in the ESR. Or import from a system which is > 4.0.
Check the KBA #1535964 How to import an IDoc/RFC into the ESR, for further details.
Regards
Mark

Import RFC - Help

Similar Messages

Maybe you are looking for