Import secret/hidden track

Hi guys, new here. I have the self-titled Blink 182 CD that has a hidden track between tracks 4 and 5. I'm trying to rip it, but it doesn't show up in iTunes. When I play it on my stereo, I can only listen to that track during the transition from track 4 to 5. While the hidden track is playing, the stereo counter display counts down to zero then starts counting up again when track 5 starts. Technically, I don't know whether it exists on its own or if is a part of either of the two tracks. I'd like to get the track any way I can, whether it's appended to the end of track 4, added to the beginning of track 5, or on its own. I would call an Apple Expert, but my iPhone is out of warranty, and I can't afford to pay $29 for one phone conversation that might end in someone telling me it's not possible. Thanks in advance to everyone who reads this post.

Use SoundTrack or try the Garageband forum
This forum is Final Cut Pro.

Similar Messages

Importing hidden track 00

Does anyone know if it is possible to get iTunes to import the hidden track 00 on CDs?
In fact, is it even possible to get any computer to even play them in the first place?
Just to clarify; the hidden track 00 is the one that plays when you rewind track 01 on a normal CD player (ideally with some form of time counter display) and typically get a song that begins at, for example, -04:00.
For anyone who didn't know they existed, give it a go. A few examples:
2 Many DJs - As Heard on Radio Soulwax Pt. 2
Muse - Hullabalo
The Music - The Music (Special edition)
Rammstein - Reise Reise
Skunk Anansie - Stoosh
UNKLE - Psyence Fiction (Special edition)
I just wish I could have them in my iTunes library. It would, however, cause a problem filing them correctly, you probably can't have a track number 00 in the file info.
Cheers to anyone who can help.

No can do.
Really the only way to capture the audio is to interface a stand-alone CD player with your computer, manipulate the CD player to play the hidden track, and use audio capture software to record the audio onto your computer.

Editing "Hidden" tracks from a CD

You know how some CDs have "hidden tracks? When you import them they come with minutes of silenece - can you devide them? and then delete the silence?
Help? Thanks!

You can't do it through iTunes. I think you're going to need some kind of program that splits audio tracks so you can divide that track into 2 parts. After that it would need to be imported into iTunes and from there to the iPod.
I don't have any experience of any such programs on Windows though.

I've been importing all my old CDs into itunes but one of them which was unknown imported as single tracks. How can I combine these into one album

I've been importing all my old CDs into itunes but one of them which came up as unknown has imported as single tracks named track 1, track 2 etc. It wasn't an obscure CD (Paul Carrack - the journey so far) but not one that's available in the itunes store. I've manually changed the track names but they all appear as single tracks in the "Albums" section. Is there a way to put them all into an album to show up as an album with the other albums. Other "unknown" CDs I imported have imported with the correct track names but just don't have the album artwork so I don't understand why this one is behaving totally different?

If you select the tracks all together in iTunes/ Songs then go to File/Get info you will be asked "Are you sure you want to edit information for multiple items?" Go ahead and you can make them into an album, putting in the artist name, etc.

Song names imported as "artist - track name" instead of "track name"

When I add a folder to my library (a folder which contains MP3 files which all contain complete ID3 tags), about 50% of the song names get imported as "artist - track name" instead of just "track name". If I click on any track which was imported like this, and right-click and select "get info", the track name shows up correctly in the dialog box, and it suddenly fixes the display on the listing (without me doing anything).
I could fix each song by clicking "get info", but I would have to do this for all my songs, which would take far too long. Is there any way to get iTunes to import these track names correctly? Or is there a way to refresh the listing, and have iTunes re-read the ID3 tags on the MP3 files?
Windows XP Pro

To get the track names etc., when importing a CD, you have to be connected to the Internet.
This article explains why.
To get the info later, select all tracks (with the generic track names) of an album and choose 'Get CD Track Names' from the Advanced menu in the menubar.
Very often the correct information will show up.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data)

How do I import multiple audio tracks?

Hi there...
I have a number of video files that have multiple audio tracks in them. The problem is I can not work out how to get prem to see multiple audio tracks. The files import fine and I have also tried various other formates with multi-track audio.. but only audio "stream 1" is visible in prem.
What I was hoping is that the video would come in with a 2 audio tracks instead of 1 each in its own "lane".. so I can then use the mixer and the audio files are linked to the video file and in perfect sync.. (just like when you import with 1 track)
NOTE: I am not talking about channels.. but complete 2 completely different audio tracks.. and I know that I could extract these audio streams into wavs and then re-sync them but this seams overkill and a duplication of effort... surly there is a way to have prem support more than 1 audio track on a video file?
--Me

Well, if PP doesn't bring them in, then best guess is they just don't exist.
There's really no trick or user adjustment for this that I'm aware of. You import the file, PP sees what's in it. I've never observed or read about any other behavior than that.

ITunes crashes often importing last CD track

Running iTunes 6 on WinXP (Sony Vaio RS402, 1.5Gb RAM, P4 2.8GHz) I often have a problem with iTunes hanging while importing the last track of a CD (both commerical and burned). Tried using 2 different CD drives but the same problem. Any ideas?

Thanks. Here's the printout
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCV-RS402(CE)
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), Pfc (2.5.0.204), RegKill (2.3.0.1),
UpperFilters: InCDPass (4.2.9.1), GEARAspiWDM (2.0.4.3),
Video Driver: RADEON 9200 SERIES \RADEON 9200 SERIES
IDE\DiskST3400832A_____________________________3.02___, Bus Type ATA, Bus Address [1,0]
IDE\DiskWDCWD1200BB-98DWA0____________________15.05R15, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskSony___UMH-U_HS-CF____2.49, Bus Type USB
USBSTOR\DiskSony___UMH-U_HS-MS____2.49, Bus Type USB
USBSTOR\DiskSony___UMH-U_HS-SM____2.49, Bus Type USB
IDE\CdRomHL-DT-STDVD-ROM_GDR8162B_______________0015___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomSONYDVD_RW_DW-U14A_____________________2.0c___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomXD2501UKJA702C________2.0B, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: SONY DVD RW DW-U14A, Rev 2.0c
Audio CD in drive.
Found 13 songs on CD, playing time 45:15 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 03:00:23
Track 3, start time 03:53:25
Track 4, start time 05:32:28
Track 5, start time 10:16:55
Track 6, start time 13:02:63
Track 7, start time 14:12:30
Track 8, start time 18:34:68
Track 9, start time 21:12:68
Track 10, start time 26:46:30
Track 11, start time 27:45:65
Track 12, start time 35:48:23
Track 13, start time 39:00:43
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 24.
The drive CDRW speeds are: 24.
The drive DVDR speeds are: 24.
The drive DVDRW speeds are: 24.
F: HL-DT-ST DVD-ROM GDR8162B, Rev 0015
Audio CD in drive.
Found 38 songs on CD, playing time 60:43 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:16:50
Track 3, start time 07:10:27
Track 4, start time 10:24:12
Track 5, start time 12:05:37
Track 6, start time 13:17:37
Track 7, start time 16:15:12
Track 8, start time 19:36:12
Track 9, start time 21:43:32
Track 10, start time 22:40:67
Track 11, start time 29:48:62
Track 12, start time 31:26:40
Track 13, start time 32:59:07
Track 14, start time 39:14:25
Track 15, start time 42:00:12
Track 16, start time 44:42:55
Track 17, start time 47:58:20
Track 18, start time 48:15:12
Track 19, start time 48:25:45
Track 20, start time 48:43:65
Track 21, start time 50:24:55
Track 22, start time 50:36:12
Track 23, start time 50:54:30
Track 24, start time 51:10:45
Track 25, start time 51:44:42
Track 26, start time 51:51:32
Track 27, start time 52:00:72
Track 28, start time 52:11:00
Track 29, start time 52:36:10
Track 30, start time 55:31:50
Track 31, start time 55:43:35
Track 32, start time 55:51:32
Track 33, start time 56:06:07
Track 34, start time 56:21:72
Track 35, start time 56:36:50
Track 36, start time 56:45:07
Track 37, start time 57:10:12
Track 38, start time 60:35:20
Audio CD reading succeeded.
Get drive speed succeeded.
V: XD2501U KJA702C, Rev 2.0B
Drive is empty.

How to delete albums of events, last 12 months, last import, and hidden in photos iPhone 4s

how to delete albums of events, last 12 months, last import or hidden in photos iPhone 4s?

Photos synced to the iphone from your cmputer are removed the same way, the sync process.
Open itunes, connect iphone, go to photos tab, select what you want, sync.

In Logic Pro, trying to import a drum track from the bin to arrange area, the 'follow loop' box does not appear in the inspector

imported a drum track from bin to arrange area. It will not follow tempo of the project even though it was recorded in this project. The 'follow tempo' box in the inspector does not appear even though it is present on other tracks in the file.
how do I set up the track so the 'follow tempo' box appears in the inspector?

Don't drag the midi into an open Logic project. The tracks won't set up correctly.
'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

How can I import a backing track from itunes to garageband? thanks!

how can I import a backing track from itunes to garageband? Just trying to record over it. thanks!

Reveal iTunes in GarageBand in the Media Browser like this:
Use the search field to find your song in iTunes, and drag the song from the m
Media Browser to a real instrument track or an empty space on the Time Line.
Or drag the song from the iTunes Application window to the desktop, and from the Desktop into the Time Line in GarageBand. Unfortunately you cannot drag directly from iTunes to Garageband.
Regards
Léonie

I'm Using home sharing and there are 156 tracks I can't import because these tracks were purchase with a diff account

I'm Using home sharing and there are 156 tracks I can't import because these tracks were purchase with a diff account. How could I import them in my new computer
TY

Authorise the new computer to the older account. Can you do the transfer now?

Itunes won't read hidden tracks and video!!!

so i bought the new justin timberlake cd, and i can't play the hidden track at the end of the cd. also, i can't get it so i can watch the video that is supposed to come with the cd or see the interactive booklet.
please help!!!!

I am also having the same problem with about 200 of my MP3s. The tag info shows up perfectly using QuickLook on Leopard, but in iTunes I can't see any of the info. I have tried converting the ID3 tag version, revesing the unicode....nothing.
Have you had any luck?

Hidden track problem

I have a CD with 2 tracks, one hidden. iTunes will only recognise the hidden track - any clues as to how to cure this? Thanks.

I didn't mean to yell. I am sorry. I was having trouble completing my question in the "new and improved" forum.
Great help guys. If I quantized real tight, select the kick drum (C1) erase duplicates, it worked fantastic. All I had to was lower the quantize % and I had a great track. Thanks again!!!

How can one find and remove hidden tracking software on an iphone

How can one find and remove hidden tracking software on an iphone

When folks did not know that it was there, they assume that it is hidden. Even the EU and the US congress got all up in arms about it.

I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?

I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?

Hi,
that's because Logic reads the volume information out of the imported MIDI tracks and sets the volume fader according to this information. The MIDI information overrides volume settings you have done, so you have to identify the MIDI events that contain volume (or expression or pan or whatever) information and delete them. You can use the event list editor for this.
Fox

Import secret/hidden track

Similar Messages

Maybe you are looking for