Import Server issues with SP4 maps

While using the Import Server, I have a newly created map using Import Mgr 5.5 SP4. (I used a schema created by XI v.7 SP9). When it runs, it throw and exception with the following error message:
<b>"Encountered a pre-SP4 map. The map needs to be upgraded to SP4.
Solution: Please, Launch the Import Manager GUI using the same source file and simply save the map"</b>
It appears to not like new entries on the Partners table and balks at auto-mapping values for the compound field for the qualified lookup table at the Customer main level. The input record is outlined below. I have set the CONFIGURATIONS to "Replace/Replace/None" and "Automap values in batch" and in the map they are set to "Create/Update (ALL MAPPED)/Update (ALL MAPPED)".
Thanks in advance. Don
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:CustomerCreateResponseTest xmlns:ns1="urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100">
- <CUSTOMER>
- <item>
     <CUSTOMERNO>0099999989</CUSTOMERNO>
     <MDMCUSTOMER>4539</MDMCUSTOMER>
     <CREATE_DATE>16/01/2007,09:39:30</CREATE_DATE>
   - <RETURN>
      <TYPE>E</TYPE>
      <MESSAGE>F2381 MESSAGE</MESSAGE>
     </RETURN>
   - <PT_CONTPART_RETURN>                    qualified lookup table
    - <item>
        <MDM_CONTACT>0000000002</MDM_CONTACT>           non-qualifier
        <CONTACT>0002111119</CONTACT>                qualifier
      </item>
     </PT_CONTPART_RETURN>
   - <PARTNERS>                              qualified lookup table
    - <item>
       <CUSTOMERNO>0099999989</CUSTOMERNO>           non-qualifer
       <PARTNER_FUNCTION>RE</PARTNER_FUNCTION>          non-qualifer
       <PARTNER_NUMBER>0090098989</PARTNER_NUMBER>      non-qualifer
       <DEFAULT_PARTNER>X</DEFAULT_PARTNER>           qualifier
      </item>
     </PARTNERS>
    </item>
   </CUSTOMER>
</ns1:CustomerCreateResponseTest>

For all watching this thread:
We were running MDM 5.5 SP4. We applied Patch 2 (not patch 3) to our 32-bit system and we no longer get this error. We now get an error that the "Source File does not conform to the XML Schema", an entirely new issue. I will open a new question regarding that.
Thank you. Don

Similar Messages

Strange Errors from Import Server on Schema-based maps for repeating nodes

I have already posted one thread about this, but perhaps some more in-depth information is required:
We have uploaded our schema into the console, and have mapped the following multi-node file to it:
CUSTOMER <repeating node>
MDM_CUST (new Customer number returned)
CUSTOMER(mapped back from XI for RECORD MATCHING)
CREATE_DATE (text field)
CONTACT<repeating node>
    CONTACT_NO (RECORD MATCHING : NON-QUALIFIER)
    CONTACT_SAP_NO (QUALIFIER)
     [NOTE: There are other qualifers for CONTACT, but only this one
qualifier is being returned and is the only field that would and should be updated.
The other fields should be left alone. However, it appears to overwrite EVERYthing
with NULL other than these two fields. The CONTACT_NO is the sole qualifer on
the table. It is a calculated field that equals the Auto-ID that is also produced on
the table - but obviously not mapped.]
PARTNER<repeating node>
    CUSTOMER_NO (RECORD MATCHING : NON-QUALIFER)
    PARTNER_FUNC (NON-QUALIFIER - Code given to lookup from PARTNER_FUNCTION table which has Code and Desc)
    PARTNER_NO     (NON-QUALIFIER)
    DEFAULT_PARTNER_FLAG (QUALIFIER)
<CLOSE CUSTOMER NODE>
In the Customer main table, all records are matched on CUSTOMER. The CONTACT_NO non-qualifer is matched to the CONTACT qualified lookup table directly since it is the only available non-qualifier. For the PARTNER table, the three qualifiers are mapped and then a compound field is created to map to the PARTNER table entry.
We have the Configurations set at:
Default Multi-Valued Update: Replace
Default Qualified Update: Replace
Default Matching Qualifiers: None
Our record matching is: Create / Update(ALL MAPPED FIELDS) / Update(ALL MAPPED FIELDS)
When the map is reused, the repeating nodes are all recognized, be it one node or many. However, when the map is reused, it does not automatically map the values for many of the Partner fields (nor the compound field) though the fields are correctly mapped.
Also, when we attempt to use Import Server to automate the mapping, we use the mdis.ini set to
Automap Unmapped Value=True
Unmapped Value Handling=Add
Always Use Unmapped Value Handling=False
We get a very strange error saying that :
[code]Encountered a pre-SP4 map. The map needs to be upgraded to SP4.
Solution: Please, Launch the Import Manager GUI using the same source file and simply save the map.[code]
Could it be that our MDM 5.5 SP4 is not compatible with schemas generated with XI v.7 SP9?
All of our MDM is 5.5 SP4. It makes no sense that we would get THIS kind of error. Also, I am questioning our combination of these and other configurations since it doesn't always seem to do what it should

Hi Donald,
this sounds good so far. Just a short hint: you've set "Default Qualified Update: Replace". This explains why Import server "appears to overwrite EVERYthing
with NULL other than these two fields.". The reason is the replace. A replace means that the old values are completely deleted and only the new incoming ones are stored. I'd suggest to use any of the Update possibilities.
Note: the definitions you set in in the record matching step are mainly for the new records in the main table! Records in qualified look ups are handled differently! If you open your map in Import Manager, switch to tab "Map Fields/Values". Select a field that is your non qualifier. Right-Click on it and choose "Set qualified update" from the context menu. Now you can define which qualifiers can be used for the qualified look up matching. And you can define as well what should happen with new and/or existing records.
Regarding the value mapping: do you use keymapping? Or do you use simple values only? Do you save the map everytime you add a new value mapping?
Regarding the issue "Encountered a pre-SP4 map. The map needs to be upgraded to SP4. Solution: Please, Launch the Import Manager GUI using the same source file and simply save the map". This sounds very likely like a bug in MDIS and should be reported to SAP!
Hope that helps
Michael

Issue with heat maps refresh process in EID 3.1?

Issue with Heat Maps in EID 3.1? Heats maps don't refresh unless you go back to home page and then again go back to the Endeca app.
In Oracle Sample app if we open the Map tab we will see that Milwaukee is really hot in the heat map. now if we filter the data to just show data from 100 miles within Orlando, FL then the map will get refreshed to show that area but the colors on heat maps do not change.
Now if we keep the refinements same and go back to home page and again go back to sample app and maps tabs then it will still show area of 100 miles within Orlando, FL which is good but now heat map would have updated and it would show us correct color.
Now if we remove the refinement then it would show complete US map as hot which is again wrong.
I have observed this issue in chrome browser as well as firefox.
Is there anyway to overcome this issue?

This issue was resolved after applying latest patch from Oracle.

Regarding Sun Java System Application Server Issue with JVM

Regarding Sun Java System Application Server Issue with JVM
Hi
I have installed SJSAS9.1 on solaris system. I m trying to deploy war file which i compiled in windows enviorment by jdk1.5.0_05. Every time i got the following error :
type Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: PWC6033: Unable to compile class for JSP
PWC6199: Generated servlet error:
[javac] javac: invalid target release: 1.5
[javac] Usage: javac
[javac] where possible options include:
[javac] -g Generate all debugging info
[javac] -g:none Generate no debugging info
[javac] -g:{lines,vars,source} Generate only some debugging info
[javac] -nowarn Generate no warnings
[javac] -verbose Output messages about what the compiler is doing
[javac] -deprecation Output source locations where deprecated APIs are used
[javac] -classpath Specify where to find user class files
[javac] -sourcepath Specify where to find input source files
[javac] -bootclasspath Override location of bootstrap class files
[javac] -extdirs Override location of installed extensions
[javac] -d Specify where to place generated class files
[javac] -encoding Specify character encoding used by source files
[javac] -source Provide source compatibility with specified release
[javac] -target Generate class files for specific VM version
[javac] -help Print a synopsis of standard options
note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server 9.1 logs.
I have cheked jvm version on both system the only difference is :
Solaris points to jdk 1.5.0_09
Windows point to jdk1.5.0_05
Even i tried to run blank jsp also but again i got the same error.
Can any help me to sort out the problem or give me any idea so i can do something by my own.
Thanks in Advance
Gagan

Do you have ANT installed and available?
Thanks,
Kedar

Finder Wants Permission Every time File is moved on Server (issue with multiple users)

The Situation: I have a team of seven coworkers that uses a file structure on a server to move job folders from the 'active jobs' folder to "coworker x's" folder and then to a "waiting" folder once the job has been completed. Pretty much just moving folders into different folders. Seems pretty simple.
The Problem: At times, some folders will not move from one folder to another, and a message pops up asking "Finder wants to make changes. Type your password to allow this" and then it shows my computer's name and asks for a password. Now if typing in the password meant that the file would be moved, I would be fine with it, but when I type in my password in and accepts it, it does nothing! Like I said, there are seven of us that are using this system, and everyone has the same issue with the same folders, it is not like one person can move it and another cannot. To make it even harder to define where the issue is coming from: if you go back after a few minutes / hours, the folder will randomly be able to move with no issue. If you take the files out of the folder, you can move them, and when you move the now empty folder, it will gladly move into any folder, but when the files remain in the folder it asks for the password. And in some cases, folders that were just made and are empty have the same issue, which leads me to believe that this issue is not a result of the contents of the folder, but something else.
It is seemingly impossible to nail down the cause of our dilemma so I have come here in hopes of a great break through. The worst part is is that we are not doing anything that difficult, we are simply moving folders around. This is a windows based server, that might be important. Also, some of us are running Mavericks and others are still on Snow Leopard. Thank you for any information you might have! ( I have already tried the boot in recovery, resetpassword trick with no luck >_< )

If we're going to fix this, we will have to concentrate on one person to start with. Can that be you?
Some more information is required, only from you, your Mac and your windows user account on the server:
On the Windows server, are the 3 folders in question within the one shared folder?
What is the name of the Volume (share) that appears in Finder?
Are any of the folders being copied or moved to the local drive of the Mac?
On the windows server, what are the permissions that you have to:
The top-level shared folder
The 3 folders underneath the top-level shared folder
Do a Get Info of the Volume (share) in Finder and do a screen shot of both the area above Preview and the area below Preview (Preview itself is not required. Make sure all right-pointing arrows are expanded to down-pointing arrows so all info in each section can be seen.
(Did this discussion get re-assigned to the OS X Server Community? I've never been there, and I thought I found it in the OS X Mavericks community.) Are you actually running OS X Server on the Macs?
Message was edited by: SilverSkyRat: Additional Question

Special characters issue with Nokia Maps on N95

Hi there,
when using Navigation in conjunction with Nokia Maps on my N95, all streets and towns which contain any special character in their name (for example: é, è, ü, ä, ö, etc…) do appear as unreadable garbage on the screen of the N95.
I only noticed the problem after having purchased the 3 years license Navigation upgrade (EUR 99.99) and immediately notified Nokia. That was back in October. Since then I have called them at least 10 times and ultimately I have asked for a refund as no solution is still available.
In all these calls with Nokia, the only reasonable argument I heard was that maybe (!!!) the new software update version 20.0.015 released back at the end of November could solve the issue. Unfortunately, for my phone (which is a branded one) the update is not yet available.
Today, after calling them again, I was told that Nokia’s policies do not foresee refunds and therefore my request has been rejected. I was told to bring my phone to a Nokia Store and see if they can help me (I don’t see how). I was also told that maybe I would have to send-in the phone for repair.
This is soooo frustrating that despite the 3 months of patience and all the money spent for the N95 (not quite cheap), the navigation upgrade and the phone calls to Nokia, I still have the same issue. I will probably end up filing a complaint with a monthly consumer’s magazine in the hope they will publish my story.
After all, it may not even be Nokia’s fault but rather the guys who are responsible for the maps, but if Nokia accepts to have a commercial venture with a vendor, than they also accept liability for the joint product. And by turning down my legitimate request for refund, they have proven not to give a **bleep** about people like you and me.
Forgive me for the long post - needed to release some of the frustration...

I have been using an N95-8GB since Nov.'07. From my experience with this phone that has a built-in mass memory besides the phone memory. I had trouble retrieving some of the softwares I have installed. For eg. I have saved some themes in the mass memory & I could not find it when I want to delete it. There are some 3rd parties games software inside where I cannot even delete
This is what I don't like about the phone. I have bought an N82/Black recently as it uses an external memory card.
Coming back to Nokia maps. Personnaly, I don't think they are that good & I have problem downloading it into my phone from my PC after having downloaded it from Nokia.
By the way the Nokia map is not even the latest map 2.0. Is still a 1.0
I used Navfone map software & it works OK in the 8GB. You have to purchase it.
I have used a couple of N-series phones in the past ie. N-90, N-70, N-71, N-73, N-80/Black, N95, N-95/8GB & now N-82.
Common with all N-series phones. After you have disconnected when you are done with your call you have to wait for a while before the word "disconnected" disappears.
The more features it has, the more problem you are gonna to encounter.
Unless you want to download softwares into your phone & have a good camera thats where the N series phones come in.
For normal usage, a 40 series phone will suffice.

Import Server - Multiple Qualified Table - Map Crash

Hello,
Requirement: I need to update multiple qualified table using single source file.
Preparation: I have created a map where mapping to multiple qualified table fields maually.
Have created a Inbound Port using the above map.
Problem: Import server throws an exception; while opening the Import Manager using the Port Option and corresponding Exception; Lot of fields were un-mapped. Looks like Import map crashed.
Please feel free to throw some light reg the same!
Thanks
Alexander

Hi Alexander,
If you are performing multiple qualifier table mapping and importing then you will hav eto create differnt map for each table importing.In that case you will rrquire multiple inbound ports and in each ports deatils you will give the map name pertaining to which qualified lookup table you wish to import.
Actually using automatic importing for lookups is not desirable as the lookups always need to be prepopulated before your main table importing.
The exception taht you are receiving could be due to the reason that the map you are saving is using only one table mapping and so most of the fields are left unmapped.
try not to use automatic importing for Lookup qualifier tables and use manual importing and see if the the exception still comes.
Hope it helps
Kindly reaward points if found useful
Thanks
Simona

Server issue with iCal/Google?

I have been having this issue for a while: I keep getting an error message as soon as I open iCal about not being able to connect to a server because of a password issue with my synced (from Google calendar) calendars.
Specifically, the pop up says: "The server did not recognize your user name or password for account ____", and then iCal immediately crashes. This has been happening for months now, making iCal completely unuseable to me, but I need a calendar on my Mac!
Help! Please?

Have you granted the IIS user read & execute access to the %ORACLE_HOME% directory and subdirectories?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

DNS Server Issues with Comcast and Airport Extreme wifi routers

I am having significant challenges with 3 Airport Extreme (latest gen) wifi routers and my Comcast Xfinitity service. It once worked just fine, but now I continually get the blinking amber lights stating "No DNS servers" for each of the Airport Extreme (AE) routers. My configuration is:
Coax cable -> Comcast Xfinity cable modem -> ethernet to 16-port gigabit ethernet switch ->->-> ethernet to 3 Airport Extremes around the house direct connected with switch
I have many wifi devices throughout the house (iPads, MacBooks, home automation devices) as well as direct-connected devices via ethernet (one PC connected to AE router).
Each Airport Extreme router is set with these settings in the Airport Utility app:
Internet tab= Connect using: DHCP
Wireless tab= Network mode: Create a wireless network
Network tab= Router mode: Off (Bridge Mode)
I have attempted to put the Xfinity cable modem in bridge mode, and use the Airport Extreme to serve up the IP addresses, but still lost internet connectivity.
I have also attempted to set the Network tab=> Router Mode to "DHCP and NAT" but get "Double NAT" error issues as well.
I have tried using the Comcast DNS server addresses (75.75.75.75;75.75.76.76) setting on the Internet tab for the routers and do end up getting a green light, but NO internet connectivity.
Lastly, I have tried using the Google DNS servers (8.8.8.8;8.8.4.4) setting on the Internet tab the routers giving me the No DNS servers amber light error and again, no Internet connectivity for either wifi-connected or even ethernet connected (directly to Airport Extreme router) devices (like my PC) despite getting a green light on the router.
Any this point, it really seems that these AE routers are NOT compatible with the Xfinity cable modem or service… (and yes, I've tried power-cycling and restarting the modem, and then the AE routers, MANY times to little avail).
Should I move one of these Airport Extreme wifi routers to before the switch, and have the other 2 in Bridge mode after the switch? Do I need to setup a specific range of DHCP reservation addresses for each different AE router?
Appreciate any insight anyone can share with this aggravating DNS server issue between Comcast & multiple Airport Extreme wifi routers.

I do not see anything wrong with your basic setup.. the issue is indeed the WAN ports of the AE.. AC version are having problems with some network equipment.
You have listed a stack of things you have tried.. but I want you to move the ethernet patch cable you use on each AE to its LAN port instead of WAN.
Restart the airport when you do that.. and then see if it becomes stable.
In bridge mode the airport moves the WAN port to LAN.. but the WAN port setup itself seems more problematic than the LAN ports.
There are other methods we can try if this does not work.. but in the end.. I would be tempted to take the whole lot back to apple.. they need to start making equipment that works with standard modems and switches.
BTW what brand is the 16 port switch?? Does it happen to be managed (smart type)?

Ipsec Stateful Failover issue with Dynamic-Map

Hi all, I have an issue with a couple of Cisco ISR 2921 in Ha Ipsec Stateful Failover configuration.
With static crypto-map, stateful works good, Ipsec sessions are correctly trasmitted from Cisco Active router to Cisco Standby router.
With dynamic-map and profile, stateful fails, Ipsec sessions are not correctly trasmitted from Cisco Active router to Cisco Standby router.
I tried different IOS version:152-1.T3, 152-3.T2 and 153-1.T but I have the same behavior.
Could you help me?
Marco

Yes it is supported. It is supprted on VAM, VMA2, VAM2+.

ODC Import Server - Working with emailed read only files

When running the ODC import server as a service or as an application we sometimes get users that send us emails with "read only" attachements. ODC will get stuck on these emails becasue excel will prompt to open the read only file.
Is there a way we can easily get around this problem? Is there an ODC setting or an Excel setting that I can use to always open all excel documents?
Data_Bitz

You are missing an indexing step, which can't be done automatically without the Recognition server (or manual indexing). ODC manual explains briefly on the 34th page:
Import Server, which imports images and other electronic documents directly into Capture from sources such as email, FTP sites, network folders, list files, and fax providers. As images and electronic documents are imported, they are converted into Capture batches where they can be indexed using Index or Recognition Server and then committed.
I use import server only for importing network folder scans and assigning them to the appropriate batch for manual indexing, so can't give you an elaborated advice.
Regards,
Boris
Edited by: tombo on 2011.09.14 01:21

Integrated weblogic server Issue with Host name mapped to multiple IPs

I am running very simple ADF application from Jdev 11g (11.1.1.3.0).
Compilation was successful but weblogic server facing problem while starting.
It is showing HostAName is mapped with Multiple IP Addresses.
Please provide solution to fix the issue....
log is,
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Dec 23, 2010 11:49:42 AM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<Dec 23, 2010 11:49:44 AM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<Dec 23, 2010 11:49:46 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 23, 2010 11:49:46 AM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Dec 23, 2010 11:49:46 AM EST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Dec 23, 2010 11:49:46 AM EST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00001. Log messages will continue to be logged in C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Dec 23, 2010 11:49:46 AM EST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Dec 23, 2010 11:49:57 AM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Dec 23, 2010 11:50:14 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Dec 23, 2010 11:50:14 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 23, 2010 11:50:28 AM EST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Dec 23, 2010 11:50:28 AM EST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00001. Log messages will continue to be logged in C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Dec 23, 2010 11:50:28 AM EST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Dec 23, 2010 11:50:31 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:114b:ab6a:23b1:b44c:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.10.103:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:c48:60a:9d0d:7cda:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:5efe:c0a8:a67:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:95ca:d058:6a51:53e8:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Warning> <Server> <BEA-002611> <Hostname "Raja-PC", maps to multiple IP addresses: 192.168.10.103, fe80:0:0:0:114b:ab6a:23b1:b44c%12, fe80:0:0:0:c48:60a:9d0d:7cda%13, 2001:0:4137:9e76:c48:60a:9d0d:7cda>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 2001:0:4137:9e76:c48:60a:9d0d:7cda:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Logger><error> ServletContainerAdapter manager not initialized correctly.
Edited by: user1158476 on Dec 23, 2010 3:05 PM

Thanks for reply...
If you look at the last line of log there is some error message:
<Logger><error> ServletContainerAdapter manager not initialized correctly.
after this no further logs and web page not open in Browser.

Issue with Transporting Mapping

Hi,
There is a strange issue that we are facing while importing a mapping from one PI server to another.
Source PI server : PI 7.1
Target PI server : PI 7.1 EHP1
For the first time the softwarecomponent was import successfully. However eventually there were certain changes in the mapping and the mapping was transported to the target system.
While doing so we encountered an issue stating :-
The source structure, target structure, or a function library has been changed or could not be
found in the Enterprise Services Repository. The mapping definition contains elements or attributes
that does not exist in the changed structure, or function that were changed in a function library.
The relevant entries will be deleted
calculate122222222222222 function not found
       Signature of field 'a' has changed
       Signature of field 'b' has changed
       Signature of field 'c' has changed
Howerever there is no such udf in the original software component. Also there is no Udf with name calculate.
There is no common udf for all the 3 target fields as well.
There is only an RFC lookup that is common among the 3 fields, but without any field 'calculate'
Kindly advice in case anyone has encountered such an issue.
Regards,
            Milan Thaker

> calculate122222222222222 function not found
This is a default name, when the function is not found. You don't find the real function name in the error message.
If you use a standard function and this is no longer available after import -> OSS ticket.
If it is a global UDF, import it before the mapping.

Oracle Report Server Issue with Japanese Characters

We are trying to setup a Oracle Report Server to print the Japanese characters in the PDF format.
We have separate Oracle Report servers for printing English, Chinese and Vietnamese characters in PDF formats using Oracle Reports in the production which are running properly with Unix AIX version 5.3. Now we have a requirement to print the Japanese characters. Hence we tried to setup the new server for the same and the configurations are done as same as Chinese/Vietnamese report servers. But we are not able to print the Japanese characters.
I am providing the details which we followed to configure this new server.
1.     We have modified the reports.sh to map the proper NLS_LANG (JAPANESE_AMERICA.UTF8) and other Admin folder settings.
2.     We have configured the new report server via OPMN admin.
3.     We have copied the arialuni.ttf to Printers folder and we have converted this same .ttf file in AFM format. This AFM file has been copied to $ORACLE_HOME/guicommon/gk/JP_Admin/AFM folder.
4.     We have modified the uifont.ali (JP_admin folder) file for font subsetting.
5.     We have put an entry in JP_admin/PPD/datap462.ppd as *Font ArialUnicodeMS: Standard "(Version 1.01)" Standard ROM
6.     We have modified the Tk2Motif.rgb (JP_admin folder) file for character set mapping (Tk2Motif*fontMapCs: iso8859-1=UTF8) as we have enabled this one for other report servers as well.
Environment Details:-
Unix AIX version : 5300-07-05-0831
Oracle Version : 10.1.0.4.2
NLS_LANG : JAPANESE_AMERICA.UTF8
Font Mapping : Font Sub Setting in uifont.ali
Font Used for Printing : arialuni.ttf (Font Name : Arial Unicode MS)
The error thrown in the rwEng trace (rwEng-0.trc) file is as below
[2011/9/7 8:11:4:488] Error 50103 (C Engine): 20:11:04 ERR REP-3000: Internal error starting Oracle Toolkit.
The error thrown when trying to execute the reports is…
REP-0177: Error while running in remote server
Engine rwEng-0 crashed, job Id: 67
Our investigations and findings…
1.     We disabled the entry Tk2Motif*fontMapCs: iso8859-1=UTF8 in Tk2Motif.rgb then started the server. We found that no error is thrown in the rwEng trace file and we are able to print the report also in PDF format… (Please see the attached japarial.pdf for your verification) but we are able to see only junk characters. We verified the document settings in the PDF file for ensuring the font sub set. We are able to see the font sub setting is used.
2.     If we enable the above entry then the rwEng trace throwing the above error (oracle toolkit error) and reports engine is crashed.
It will be a great help from you if you can assist us to resolve this issue…

Maybe 7zip or another tool has workarounds for broken file names, you could try that.
Or you could try to go over the files in the zip archive one-by-one and write it to files out-1, out-2, ..., out-$n without concerning yourself with the file names. You could get file endings back via the mimetype.
This script might work:
#include <stdio.h>
#include <zip.h>
static const char *template = "./out-%04d.bin";
int main(int argc, char**argv)
int err = 0;
zip_t *arc = zip_open((const char*)argv[1], ZIP_RDONLY, &err);
if(arc == NULL)
printf("Failed to open ZIP, error %d\n", err);
return -1;
zip_int64_t n = zip_get_num_entries(arc, 0);
printf("%s: # of packed files: %d\n", argv[1], n);
for(int i = 0; i < n; i++)
zip_stat_t stat;
zip_stat_index(arc, i, ZIP_FL_UNCHANGED, &stat);
char buf[stat.size];
char oname[sizeof(template)];
zip_file_t *f = zip_fopen_index(arc, (zip_int64_t)i, ZIP_FL_UNCHANGED);
zip_fread(f, (void*)&buf[0], stat.size);
snprintf(&oname[0], sizeof(template), template, i);
FILE *of = fopen(oname, "wb");
fwrite(&buf[0], stat.size, 1, of);
printf("%s: %s => %lu bytes\n", argv[1], oname, stat.size);
zip_fclose(f);
fclose(of);
zip_close(arc);
return 0;
Compile with
gcc -std=gnu99 -O3 -o unzip unzip.c -lzip
and run as
./unzip $funnyzipfile
You should get template-named, numbered output files in the current directory.
Last edited by 2ion (2015-05-21 23:09:29)

HP Officejet 4500 Wireless Printing Issues with Online Maps & Financial Institutions

I have an HP Officejet 4500 Wireless printer that I have wireless connection to my HP G72 Laptop running Windows 7 (64 bit) with Internet Explorer 9. I am having trouble printing online maps from either Bing Maps or Google Maps. It seems the print jobs get stuck in the print que and always show an indefinite status of “Printing” in the que but never get printed.
I’ve tested my other applications including Office 2010 and all other jobs seem to print just fine. I do use the “Print” button located in each of the online Map sites (Bing, Google). This is when the jobs get stuck.
I do also have the HP Bing Bar installed with Smart Print. The Smart Print feature seems to work with the online maps just fine (seems I’ll just use it instead).
Another separate printing issue is that I can never get any of my online financial transactions to print from any of my online financial institutions with either the Internet 9 print features or the HP Bing Smart Print feature. I can never get those to print (have to wait for the PDF statements to be available).
Any ideas as to why I can print the maps or online financial transaction? I get no error messages either.

Hi,
Please use the following tips/instructions to fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Import Server issues with SP4 maps

Similar Messages

Maybe you are looking for