Import Server not working

Hi ,
I have a scenario where PI is sending data to MDM inbound port which is automaticaly getting imported to MDM .
Now problem is PI is succesfully sending data but file is not coming to Inbond port.
PI side all the configuration is fine .
Through Import amanger its working fine.
Kindly help me out .
Thanks in advance.
Regards,
Neethu Joy

Hi Neethu,
it seems problem at PI level because as you said file not coming in MDM inbound port.
To check MDM import server working or not just put file in MDM inbound port manually and check wether file processing automatically or not.
if PI sending file to to inbound port then you need to check port in MDM console and configuration parameter such as remote system, map , file format, processing time, file aggregation count etc.
Kindly check and revert back.
Thanks,
Jignesh Patel

Similar Messages

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

Audio CD import is not working the cd is ejected before itunes can read it

audio CD import is not working the cd is ejected before itunes can read it. Does anyone know how to fix this?
Lainey

Does this happen with all cd's or one in particular?
Reset the SMC http://support.apple.com/kb/HT3964
Reset the PRAM http://support.apple.com/kb/HT1379
Try a cleaning disc. You can get them at places like Radio Shack.
If nothing helps your optical drive has probably failed. You can replace it or purchase an inexpensive external drive. Don't buy the Apple SuperDrive as it won't work with macs that have a built in drive.

Import Server not picking up the file

Hello,
I have 2 repositories running on the same server. Import server picks up file for one repository, but not for the other. What could be the reason? Also, for the repository, import server not picking up the file, workflow also does not send an email notification.
Please help
Subhash

Hi Subhash,
Hope you are not using the same Import Server for both the MDM Servers. If yes then you need to mention the MDM Sevrer name in the MDM Server parameter of MDIS.ini. Check the parameter list of MDIS.ini file.
If your repository has password for Admin user then you need to specify the same in MDIS.ini file under your repository section for User = Admin and Passowrd = [Admin password]. Remove the E from the PAsswordE and give the password for Admin user. Once done restart the Import Server and check again, parameter Password would have converted to PasswordE.
For Email Notification two things you need to check:
1. You should have specified the mail server address in MDS.ini file under your repository section for parameter Mail Server.
2. Workflow owner should have entry in Email address field of the user. Check this in Console under Admin -> Users.
Regards,
Jitesh Talreja

Force encryption on SQL Server not working?

Hello Everyone,
I'm running SQL Server 2008 64-bit. I've installed a self-signed cert on the box and set "Force Encryption" and restarted SQL server.
I setup a client machine to trust the authority of the cert installed on the server. When I connect to that SQL server from SSMS from a client machine and select the "encrypt connection" option in the client Connection properties, SSMS correctly complains
that the cert on the server does not match the computer name I asked to log into . This is because, although the cert is trusted, the dns name dos not match the CN in the cert <- Perfect, exactly what I am expecting.
When I connect to the same SQL server from the same client but UNCHECK "encrypt connection" on the client, I'm able to login. Considering I've checked the "Force Encryption" on the server, the server should have rejected the connection. Why not?
Ameer Deen

Hi all,
We are implementing a Merge Synchronization solution which involves three SQL Servers located on three Azure locations worldwide and one on-premises location. We need to secure communications between all servers. We are evaluating the encryption of all server
communications through SSL:
http://technet.microsoft.com/en-us/library/ms191192.aspx
When we configure one server (let’s call it server A) to accept only encrypted connections (with Force Encryption=Yes) we still can connect from other server (let’s call it server B) that do not have the certificate installed. We would expect the server
B to fail in the attempt of connect as server A should only accept encrypted communications and those should need the certificated to encrypt/decrypt everything (commands and data).
We have also review the following forum post that is very similar to this one:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bde679d9-ff83-4fa7-b402-42e336a97106/force-encryption-on-sql-server-not-working
In all cases the Microsoft answer is:
“When the
Force Encryption option for the Database Engine is set to YES, all communications between client and server is encrypted no matter whether the “Encrypt
connection” option (such as from SSMS) is checked or not. You can check it using the following DMV statement”
When we run the provided DMV statement to check if encryption is enabled:
-- To check whether connections are encrypted between server and clients
SELECT encrypt_option
FROM sys.dm_exec_connections
We get “TRUE”. So theoretically encryption is enabled.
Then:
Why can we run SQL statements against server A from server B (with SSMS) without any certificate?
Are we wrong when we expect server A to refuse any client that do not have the right certificate?
How can server B, without any certificate, decrypt the data encrypted by server A?
Our intention is to encrypt all server in the same way so all of them will accept only encrypted communications. We are assuming that the Merge Agent will be able to communicate with the Publisher and the Subscriber through this encrypted environment. May
anyone please confirm ti?
Thanks for your help.
Best Regards
Benjamin Moles

Yahoo outgoing mail server not working.

My yahoo outgoing server not working on iPod touch or iPad it says apple.smtp.yahoo failed...incoming is ok so far...this outgoing mail failure just started about a couple of days back....anyone else having this problem?????what should I do?rediffmail account does not get set up either so just unable to use any of my emails. :(

Hello, and welcome to the Discussions.
I get 100% success pinging mail.adelphia.net, and if at your home venue where Adelphia is your ISP, then I think no separate Authentication is required. Port 25 would be the proper port. However, if you are not at home, and the provider of internet connection limits you to using only authenticated SMTP then you would not able to use mail.adelphia.net as the Outgoing Server.
Are you at the venue where Adelphia is the ISP?
Ernie

TS2621 why my outgoing mail server not working after ios 6 upgraded

why my outgoing mail server not working after ios 6 upgraded

Ask your carrier to send you the settings over wifi and then install them that way.
I'm on giffgaff and I used the giffgaff app from the store to sort this out.
Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
Very Poor indeed and I held off using Apple products for years for this very reason!!

After unarchive a repository, the auto import is not working

Hi All,
I've met a problem when I archived a repository and unarchive it using another repository name:
I can login to it by Console, and Data manager, etc. But when I put a input file to the Ready folder of its port, the file is not processed by the Import Server. On the other hand, all the other repositories on that server remain fine and the auto-import is normal.
Could any one tell me if there is any other Config shold be done to make the import work?
PS: still the 5.5 version, not 7.1.
Thanks,
Angela
Edited by: Angela Zhang on Aug 6, 2009 9:09 AM
Edited by: Angela Zhang on Aug 6, 2009 9:09 AM

Hi Angela,
If you are using any password for Admin user then same needs to be mentioned in MDIS.ini file. Check the below steps
1. Open MDIS.ini file located in <MDM Insallation directory>/Import Server
2. Navigate to your repository section
3. Remove the character 'E' from the entry PasswordE
4. Write the password of Admin user i.e. Password = abc
5. Restart the Import Server once and check the same password entry, it should get converted to PasswordE and the value should be some characters.
6. Now check the Auto Import
Regards,
Jitesh Talreja

On iphoto my stop import is not working and the force quit does not work either

please help - the stop import and force quit on iphoto both not working. thx!

This happened to me today on the iPad; I put in the password 4 or 5 times. I began to think my account had been hacked. I tried again on my iPhone and it worked first time. Then I tried again on the iPad and same thing—worked first time. Maybe just a temporary glitch in the server?
Michael

Breeze 5 presenter - Import Audio not working in windows 7

Hi All,
We are currently using Breeze 5 presenter, the import audio function not working in the windowns 7 machine. But it works fine in the windows XP machine. Any one can help me on this or any suggesstion?
Thanks in Advance
Sajjad.

Hi Heyward,
Thanks for your reply. I just want to confirm Are you reffering to Breeze 5 presenter? or the breeze server. I am looking for the breeze 5 presenter where we create some coursewares. if possible could you also please tell us whether any patch release available from adobe to support Breeze 5 presenter on windows 7 operating system. We are getting this problem only in the window 7 machince XP works fine.
Thank you,
-Sajjjad.

Use Server Cert in Managed server not working

I am using WebLogic 10.3.3 for a managed server with a jks keystore and jrockit cacert as the Custom Identity and Java Standard Trust. I have the FQDN as the alias for the server in the keystore. Under Advanced, I have checked Use Server Cert so outgoing web service calls from my deployed application will use the server cert as its identifier. I have used this configuration before, but it is not working this time.
At first, there were some weird Unsupported OID messages when loading the cacerts, but I was able to clear those messages up. Now, when the managed server comes up, the keystore and cacert file load without error, but the outgoing calls do NOT have the certificate included.
I have no failures regarding the certificates in any of the output files. I have tried two separate keystore files without change. Any help would be appreciated.

You can re-create the SSL handshake with a command line java app that uses the same keystores. Is it possible that the service you're invoking is no longer requesting the client cert?
The command line uses a linux script and a java app:
--- linux script:
#!/bin/sh
CLIENT_KEYSTORE="full path to your server's identity keystore"
TRUST_STORE=$JAVA_HOME/jre/lib/security/cacerts
echo "Make sure you're using the right trust store..."
echo $TRUST_STORE
echo
echo "Enter trust store password"
read -s trustpass
echo
echo "Enter client keystore password for $CLIENT_KEYSTORE"
read -s keypass
SSL_OPTIONS="-Djavax.net.ssl.trustStore=$TRUST_STORE "
SSL_OPTIONS="$SSL_OPTIONS -Djavax.net.ssl.trustStorePassword=$trustpass "
SSL_OPTIONS="$SSL_OPTIONS -Dssl.debug=true -Dweblogic.StdoutDebugEnabled=true "
SSL_OPTIONS="$SSL_OPTIONS -Djavax.net.debug=ssl,handshake,verbose "
SSL_OPTIONS="$SSL_OPTIONS -Djavax.net.ssl.keyStore=$CLIENT_KEYSTORE "
SSL_OPTIONS="$SSL_OPTIONS -Djavax.net.ssl.keyStorePassword=$keypass "
javac SSL_Test.java
java -D $SSL_OPTIONS SSL_Test > client_ssl.out
---- java source:
import java.net.*;
import java.io.*;
public class SSL_Test {
public static void main(String[] args) throws Exception {
// https://someserver.net:999/someservice?wsdl
URL verisign = new URL( "address of the wsdl" );
System.out.println( "Opening URL: " + verisign.toString() ) ;
BufferedReader in = new BufferedReader(
new InputStreamReader(
verisign.openStream()));
String inputLine;
while ((inputLine = in.readLine()) != null)
System.out.println(inputLine);
in.close();
to run this, just run the commEnv.sh script to set up your java and then run the script.
This has been very useful to me in the past in diagnosing ssl connectivity issues.

OIM Event handler resistered and Imported but not working

hi,
I am using OIM 11g in windows 32 bit envoirnment.
I have registered a pre precess event handle and also imported it into oim but it's not working. pls find below details.
DB Entry of MDS_PATHS Table
1 LastNameEventHandlers.xml 197 196 /tiks/LastNameEventHandlers.xml DOCUMENT 5 143 http://www.oracle.com/schema/oim/platform/kernel eventhandlers 1 1 UTF-8 3558973303 0 0
DB Entry of plugins table
2 com.holcim.hssa.eventhandler.LastNmPreProcessEventHandlers oracle.iam.platform.kernel.spi.EventHandler 1.0 LastNamePreProcessEventHandlers 1
need tio know where does the eventhandlers goes D:\ORCL_HOME\Oracle_IDM1\server\features this path or else,
but it's not working

The eventhandler
<eventhandlers xmlns="http://www.oracle.com/schema/oim/platform/kernel" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oracle.com/schema/oim/platform/kernel orchestration-handlers.xsd">
<action-handler class="com.holcim.hssa.eventhandler.LastNmPreProcessEventHandlers" entity-type="User" operation="CREATE" name="LastNmPreProcessEventHandlers" stage="preprocess" order="FIRST" sync="TRUE"/>
</eventhandlers>
The Plugin
<oimplugins>
<plugins pluginpoint="oracle.iam.platform.kernel.spi.EventHandler">
<plugin pluginclass="com.holcim.hssa.eventhandler.LastNmPreProcessEventHandlers" version="1.0" name="LastNamePreProcessEventHandlers"/>
</plugins>
</oimplugins>
The handler
package com.holcim.hssa.eventhandler;
import java.io.PrintStream;
import java.util.HashMap;
import oracle.iam.platform.context.ContextAware;
import oracle.iam.platform.kernel.spi.PreProcessHandler;
import oracle.iam.platform.kernel.vo.*;
public class LastNmPreProcessEventHandlers
implements PreProcessHandler
public LastNmPreProcessEventHandlers()
methodName = "";
System.out.println("LastNmPreProcessEventHandlers called of NamePreProcessEventHandlers 16 ");
public boolean cancel(long arg0, long arg1, AbstractGenericOrchestration arg2)
System.out.println("cancel called");
return false;
public void compensate(long arg0, long arg1, AbstractGenericOrchestration arg2)
System.out.println("getParamaterValue called");
public EventResult execute(long processId, long eventId, Orchestration orchestration)
System.out.println("EventResult execute called of LastNmPreProcessEventHandlers 16 ");
methodName = "execute";
HashMap parameters = orchestration.getParameters();
System.out.println((new StringBuilder("Parameters ")).append(parameters).toString());
String operation = orchestration.getOperation();
System.out.println((new StringBuilder("Pre Process Operation ")).append(operation).toString());
if(operation != null && operation.equalsIgnoreCase("create"))
String firstName = getParamaterValue(parameters, "First Name");
if(firstName != null && !firstName.trim().isEmpty() && !parameters.containsKey("Middle Name"))
orchestration.addParameter("Middle Name", firstName.substring(0, 1));
return new EventResult();
public BulkEventResult execute(long arg0, long arg1, BulkOrchestration arg2)
System.out.println("BulkEventResult called of LastNmPreProcessEventHandlers 16 ");
return null;
public void initialize(HashMap arg0)
System.out.println("initialize");
private String getParamaterValue(HashMap parameters, String key)
System.out.println((new StringBuilder("getParamaterValue")).append(key).toString());
String value = (parameters.get(key) instanceof ContextAware) ? (String)((ContextAware)parameters.get(key)).getObjectValue() : (String)parameters.get(key);
return value;
private String methodName;
Also have a question where does it goes after export
D:\ORCL_HOME\Oracle_IDM1\server\features or elsewhere?

Mail server not working after upgrade

After a few hours, my server finally came back up however mail is not working.
In the /var/log/mail.log I see many error messages related to the same thing from Postfix whenever an inbound mail is recieved.
May 24 06:26:22 my.server.com postfix/postscreen[25712]: CONNECT from [62.13.138.73]:64283 to [192.168.0.3]:25
May 24 06:26:22 my.server.com postfix/postscreen[25712]: fatal: error seeking /Library/Server/Mail/Data/mta/postscreen_cache.db: Invalid argument
May 24 06:26:23 my.server.com postfix/master[54]: warning: process /usr/libexec/postfix/postscreen pid 25712 exit status 1
Help!

I'd guess that the postscreen database is missing or corrupt.
please issue the following Terminal.app commands:
postconf -n -c /Library/Server/Mail/Config/postfix/ | grep -i postscreen
postconf -c /Library/Server/Mail/Config/postfix/ | grep -i postscreen
and anonymize the output if and as desired.   If you anonymize, please consistenty replace the domain portion of your URL(s) to example.com, example.net and/or example.org (these are RFC-reserved bogus domains) and replace the server's host name to something else if that's more sensitive than "mail" or "www" or "server" — consistency in these changes is important — and alter any IP addresses included (other than 127.0.0.1 / localhost) to 10.20.30.40 (or some other private IP address — again, consistency in these changes is important — and then post that output here.
Before making any changes, get a complete system backup or two, on an external disk. That's your path back if something here goes badly wrong, weird or otherwise untoward.
Once there are complete backups and entirely as a test / guess / experiment, I'd look to rename an existing postscreen database out of the way and see if a new cache database gets created, and would also check the file ownerships and protections of the files in that area.
$ sudo ls -ale@ /Library/Server/Mail/Data/mta/
Password:
total 48
drwxr-x---   5 _postfix mail     170 Jan 30 15:20 .
drwxr-xr-x 13 root      wheel    442 Jan 28 10:57 ..
-rw-------   1 _postfix mail      33 May 5 16:08 master.lock
-rw-------   1 _postfix mail   16384 May 24 08:22 postscreen_cache.db
-rw-------   1 _postfix mail    1024 May 24 10:04 prng_exch
$
The two files that are most interesting in the above are the . and postscreen_cache.db files.
There is also an upgrade log around, and you'll definitely want to have a look in that — to see what (else?) went wrong here. (Off the top, I don't recall the name of the upgrade log file. In recent releases, it's usually something like /var/log/install.log — also check the system logs for "upgrade" messages.)

PHP Local Testing Server Not Working!

Hi Guys,
I've just set up my PHP local testing server, although its not working properly! If you could help that would be so wonderful!
Here is my current settings:
Local Site Folder: C:\XAMPP\htdocs\valsoo\
Web URL: http://localhost/valsoo/
Server Folder: C:\XAMPP\htdocs\valsoo\
Local/Network
Server Model: PHP MySQL
I'm testing the 'local testing server' with a file called site_check.php which works in the Local Site Folder root (C:\XAMPP\htdocs\valsoo\site_check.php) but fails to work when the file is within folders (C:\XAMPP\htdocs\valsoo\lesson01). Not all files work in the root either. ANY SUGGESTIONS?
Thanks so much!

Brentis wrote:
I'm testing the 'local testing server' with a file called site_check.php which works in the Local Site Folder root (C:\XAMPP\htdocs\valsoo\site_check.php) but fails to work when the file is within folders (C:\XAMPP\htdocs\valsoo\lesson01). Not all files work in the root either.
If site_check.php works, your local testing server is working.
What do you mean when you say that it fails to work when the file is in a folder, such as lesson01? What actually happens? What sort of files don't work in the root? Without more details, it's impossible to help.
If site_check.php is in C:\XAMPP\htdocs\valsoo\lesson01, you should be able to access the file through http://localhost/valsoo/lesson01/site_check.php.

Background-color:transparent !important; is not working in IE

Hi,
In my sharepoint site i have used "background-color:transparent !important;" css. It is not working in IE but in Mozilla is working fine.
And I am using IE 11. Please let me know is there any thing wrong in the syntax. If that is the case please provide me correct solution for that.
Any help would be greatly appreciated.
Regards,
Saya

Thank you for your reply.
I have checked given links. Those are not use for this issue.
Actually in my sharepoint site the same code "background-color:transparent
!important;" was working fine before installing sharepoint 2010 service pack 2. After installation we got this issue. And if i change "transparent"
with any color, it is applying that color. Only "transparent"
background css is not working in IE.

Import Server not working

Similar Messages

Maybe you are looking for