Import Site Failure -- 4 to 8

I finally upgraded to Dreamweaver 8 from version 4. There is
no direct import of sites from 4, I understand. Prowling the
support site, it said to download the Site Import Export extension.
Did that and installed it, although I got a warning that it
would affect Dreamweaver 8 (I called the Extension Manager from 4).
I didn't realize at first that the extension was being installed
into 8, apparently.
I finally figured out that I had to go to 8 and select Export
Site from the File menu. It showed all my sites, and said it
exported them successfully.
I did notice, however, that it wrote a file with an XML,
rather than STE, extension.
When to File, Import Site, then, and imported that file. It
said that my sites were successfully added, and that I had to quick
and restart Dreamweaver 8. When I restart, it lists the added
sites, which are the ones I imported -- but then when I manage
sites, there are no sites listed.
Wondering if that extension had screwed up normal Dreamweaver
8 behavior, I uninstalled and then reinstalled 8.
Still the same result -- I go through this, get a popup that
tells me new sites have been added, but then they aren't there.
Any ideas would be welcome, I was hoping not to recreate my
site definitions manually.
THANKS.

Which extension did you download?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"willllllllllllllllll" <[email protected]>
wrote in message
news:elcaft$ps2$[email protected]..
>I finally upgraded to Dreamweaver 8 from version 4. There
is no direct
>import
> of sites from 4, I understand. Prowling the support
site, it said to
> download
> the Site Import Export extension.
>
> Did that and installed it, although I got a warning that
it would affect
> Dreamweaver 8 (I called the Extension Manager from 4). I
didn't realize at
> first that the extension was being installed into 8,
apparently.
>
> I finally figured out that I had to go to 8 and select
Export Site from
> the
> File menu. It showed all my sites, and said it exported
them successfully.
>
> I did notice, however, that it wrote a file with an XML,
rather than STE,
> extension.
>
> When to File, Import Site, then, and imported that file.
It said that my
> sites
> were successfully added, and that I had to quick and
restart Dreamweaver
> 8.
> When I restart, it lists the added sites, which are the
ones I imported --
> but
> then when I manage sites, there are no sites listed.
>
> Wondering if that extension had screwed up normal
Dreamweaver 8 behavior,
> I
> uninstalled and then reinstalled 8.
>
> Still the same result -- I go through this, get a popup
that tells me new
> sites have been added, but then they aren't there.
>
> Any ideas would be welcome, I was hoping not to recreate
my site
> definitions
> manually.
>
> THANKS.
>

Similar Messages

Is it possible to import the failure cases from another test plan in MTM ?

Hi,
Is it possible to import the failure cases from another test plan? For example, I have created a new test plan with ID 1002. Now I want to import the failure cases from test plan with ID 1001. Is there anyway to do this?
Thanks,
Leslu

Hi Leslu,
As far as I know, there isn’t that feature in MTM, but we could achieve that by add test cases to the test suite.
As we know, the test case is associated to the test suite, remove the test case from the test suite won’t delete the test case, it just remove the relationship.
So, we could base on the test cases’ id to add the test cases to a test suite of another test plan.
The condition is:
Work Item Type In Group Test Case Category
ID In id1,id2 (e.g. 1,2,)
Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

IPhoto import Browser failure, after security update?

Hi, Anyone else had this problem?
iPhoto import Browser failure.
No Events or Albums show, although PhotoBooth is visible, error message 'Open iPhoto 5 or later to see photos...'
This used to work, but not since installing Security Update 2010-006 (1.0),
with "iTunes" (10.0.1) and JavaForMacOSX10.6Update3.
Using iPhoto '09 (8.1.2), iMovie '09 (8.0.6).
Heard mention that now only alpha-numeric characters are allowed for file names and titles, so started replacing "&", apostrophes, etc. But there are a LOT of photos to change!
Console shows:
[0x0-0x15015].com.apple.iPhoto[264]
MRMovieServer[273] <Error>: kCGErrorFailure
Tried repairing permissions, but got a warning about a SUID file has been modified and will not be repaired, (not sure if this is relevant).
Removed com.apple.iApps.plist and com.apple.iMovie8.plist, which then gave a slightly different view of the browser in iMovie.
Can no longer drag items from iPhoto either!
Any ideas of how to proceed (and remain sane)?

Hi,
I've had something like this, since October.
Firstly, In the Utilities folder, open Disk Utility, select the disk where the Applications are (Main hard disk) click First Aid, then "Repair Permissions". Leave it running with nothing else open.
When finished, open iMovie, click the photo browser icon, any luck?
Seen an Apple support doc 'Cannot see iPhoto in other Apps', basically you may be right about ampersands & apostrophes.
In iPhoto, look at all your smart album names for non-alpha-numeric characters, and replace or delete the possible culprits. I had lots of these, including brackets (which were not a problem until recently). Keep checking your smart albums to find others, such as these: !@£$%^&()[]{}'\"|~.
Quit iPhoto and all other iLife Apps, then in your home folder, Library, Preferences, move 'com.apple.iApps.plist' to the desktop (this will be recreated when you next open an iApp/iLife application, such as iPhoto).
You may need to remake the iPhoto AlbumData.xml file, after all that name editing. See later.
Open iMovie and click the photo browser icon, if you still get the message, rather than Albums and Events, Quit iMovie.
Open iPhoto, double check your source list for folders which you may have smart albums in, (click the triangle to the left of any folders that you've made to reveal their contents). Repeat the search and replace of special characters. I'd missed a few, hiding in folders.
Now would be a good time to remake the iPhoto 'AlbumData.xml' file.
Quit all applications, go to your Pictures folder, iPhoto Library, ctrl-click, 'Show package contents', drag 'AlbumData.xml' to the desktop.
Close the finder windows.
Open iPhoto, create a new album, then Quit, (this should remake the xml file).
Open iMovie again and click the photo browser icon. This is the point where I had success, I hope it works for you as well.
All the best, Ian

Help me to achieve my goal: creating a dynamic CQ5 website from a CRX Imported Site

Hello everyone.
For two weeks now, i'm trying to create a dynamic content CQ5 website from an imported CRX site.
What I already did and where I am now:
Step 1 - I have imported a website using the CRX Import Site tool.
Step 2 - I have done some mappings in my imported site images and texts. In the CRX content repository estructure, I can found the mappings as
unstructured nodes, at "etc/designs/mysite/dev/mappings", the component properties matching the components I selected in the component extractor;
Step 3 - I have done some extractions in my imported site images and texts. In the CRX content repository estructure, I can found the extracted components
at "apps/mysite/resources/images" (the last two ones I created myself);
Step 4 - After done all these steps, I acessed the Web Sites CQ5 menu and selected the "New Site" option, in the "New..." button. A "MySite Blueprint" is avaliable
to be selected as a Blue Print to my new site, but If I select this one and create my new site, not all the mapped components can be manipulated or selected and some
mappings just show on as an empty selection box in the page, where I am able to insert images, for exemple.
In short, after all these steps, I still can't do what I want with my mapped components and the new site is, basically, the same as the imported. Not every mapped components can be selected and edited and I can't change my site template or content (the far I got here is add a new image in the site, but without the liberty to change the position).
So, what I'm forgetting? Is there some step that I don't getting through? Maybe I need to work on the template created by the site importer?
Is there some material or media that can help me or maybe add knowledge to me?
Already read the "Site importer" and "Components" in Adobe CQ5 Documentation but don't get me far from where I am now.
If someone can help me to make this process better, with more liberty on my new site and the possibility to control all the components, adding new ones
or editing the existent ones, I'll be very gratefull and with a great new knowledge.
Operational System: Windows Server 2008
CQ Version: CQ 5.4.0.20110218
Thanks.

I want to do this using the site importer because I want to show my clients how we can make content management and experience customizations a lot easier starting by their own websites.
So, importing my customer website and transforming it in a new CQ website is the way to show this.
Anyway, thanks in advance and I'm going to look at the page component for the website that I imported.
If someone got another tip or hint, I'll be very thankfull.

Seasons Greetings. How do I keep firefox 4 from disallowing my most important sites?

Question
Seasons Greetings. How do I keep firefox 4 from disallowing my most important sites? All the garbage, it lets sail right in, but my bank accounts and library accounts are not allowed. Why is this? I have looked in the help section and tried the permissions manager, but when I type about:permissions in the location bar, I receive the following error, "The URL is not valid and cannot be located." Thanks for any useful information.

Thanks for responding. Sorry I wasn't very precise. When attempting to navigate to one of these sites, a message at the top of the screen appears, "Firefox prevented this page from automatically redirecting to another page." Then there is a dialog box which says, "Allow." Once I 'allow' it, the page I'm trying to open does so. This only occurs with certain pages, and usually pages that I need open without any computer interference. I hope this clarifies things. Again, thanks for taking your time to respond.

Importing site info from Dreamweaver 8 to CS3

I am thinking about moving from Dreamweaver 8 to Dreamweaver
CS3. I have roughly 10 sites that I edit and update. I am wondering
if there is a way to import the site information from 8 to CS3
(meaning the FTP info, folders, etc).
Thanks for the help,
Joe

I have a similar issue. I had CS4 installed on my machine with about 20 sites/ftp info etc saved into it. My computer had a complete meltdown and I had to rebuild the computer. I have installed CS4 onto the new hard drive and I was able to save the old hard drive (it was unstable though and safer to start fresh). Is it possible to have my installation of CS4 grab the site information from a different drive on my machine? I was hoping it would just find it when I installed the software, but no such luck.
I tried "importing sites" but I could find any .ste files that it was looking for. Any help would be greatly appreciated. It will take a long time to re-input all of those sites.

Export/Import site lists,library sharpoint 2013

hi,
I have two two web application on one sharepoint server 2013 (one farm) . First web application (compani.my.co) is pruduction and contains a subsites with a lot library, list, calendar , .... . On second web application I trying to import library
from production site .
I am using :
Export-SPWeb http://company.my.co/dok -Path C:\backup\test.cmp
Import-SPWeb http://Newcompany.my.co/dok/ -Path C:\backup\test.cmp
error:
Import-SPWeb : Cannot import site. The exported site is based on the template STS#1 but the destination site is based on the template CMSPUBLISHING#0. You can
import sites only into sites that are based on same template as the exported site.
The problem is about mismatch site template. How can I resolve this problem?

hi,
I created new subsite with default template , enable publishing feature and try to import but still the same.
Error
Log file generated:
C:\backup\test.cmp.import.log
Import-SPWeb : Cannot import site. The exported site is based on the template STS#1 but the destination site is based on the template STS#0. You can import
sites only into sites that are based on same template as the exported site.
At line:1 char:1
+ Import-SPWeb
http://Newcompany.my.co/dok2 -Path C:\back ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...CmdletImportWeb:SPCmdletImportWeb) [Import-SPWeb], SPException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletImportWeb

Import File Failure, Help!

Hello, I am new to Adobe Premiere Pro CS4 and thought i would start by working my way through the Adobe "Classroom In a Book" CS4. I made a start through the early chapters then almost instantly hit a problem. What ever I tried to import e.g. Panasonic P2, Still images below 4000x4000, .avi. Basically all the material that was supplied on the Dvd that come with the book, I get the message "Import File Failure" "File Video Dimentions (Width/Height) Too Large".
I've tried restarting the computer but no luck, really gutted as I need to learn this program before next semester
I've also made sure my sequence sizes are the same size as my assets
I am running the Adobe Suite on a MacBook Pro 2.53GHz with Snow Leopard (10.6.4)
Hope anyone can help
Cheers

Try reading through the results of MY SEARCH to see if anything applies. You may just need to uninstall CS4 and then reinstall it.
-Jeff

Import Sites from Studio MX

I need to import site information from Studio MX to
DreamWeaver CS3. From the New Site dialog it appears that the files
have the .ste extension, but I am not positive.
Would like to have the information needed to import site
information from Studio MX to CS3.

> AND- Is dw MX still able to run, and are the old sites
still defined on it?
>
>>> Yes, and yes.
okay- two ways to go.
The upgrade on the same machine should have pulled up all
sites defined on
the older version. Don't know why that didn't work. It's
something that
should work doing a normal upgrade on the same box.
way one:
get the third party mm-exporter utility. I don't use windows
and don't use
this program. But it works.
http://mm-exporter.joexx.de/
way two: if you can open dw MX and "see" the old sites, then
go to dw menu
IN DW MX, manage sites, and use the manage sites dialog box
to select a site
and create a .ste file for that site. Rinse, lather, repeat
for every site
you have defined. Then use the same menu item in cs3 to
"import" those site
definition .ste files
remember- there are two things- the site definition, and the
actual site
files. The site definition tells dw where things are. The
site files are the
things in the site.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Importing site from CS5 to CS6

I have been moving my sites from CS5 to CS6. At the same time I am making the switch to FTPS for all the sites.
On one specific site, I exported, imported into CS6, then made the FTPS changes needed for Yahoo hosted sites. However, I failed to remember that this site has a different password, which I don't have access to, and I typed over the password.
I thought if I deleted the site in CS6 and imported the .ste from CS5, I would restore the password. Alas, I am getting a password/login failure error message.
Was my logic in the re-importing invalid?
I also tried to cut/paste the password from the CS5 site I still had available into the CS6 site, but this did not work either.
Any suggestions other than contact Yahoo for assistance?

One other thing that you can do with respect to usernames and passwords on sites is to use Apple's Keychain Access. The folks at Adobe were very smart and they place usernames and passwords into your Keychain Access file every time you create a site and give it a server.
Simply go to your Spotlight search and type "Keychain Access" then click on it and look for your site. You will have to enter your user password to view passwords in Keychain Access, but it will let you re-establish your connection with your web host if you define a new site and mess things up in Dreamweaver.
-Mark

A very important site, does not function properly anymore, how can i go back to an earlier version of firefox

Before i downloaded your firefox 8.0.1, I used firefox to 'save as' the ''Unrealized gain/loss page'' from a brokerage account, - for my ongoing historical financial records file (safari doesn't work for this site).
On the Unrealized gain/loss page, there is a '+' symbol (in front of each stock owned) that one needs to 'clic' on (turns to a -) to see the various dates (and financial data) when you purchased different lots of the same stock. (say, ''IBM''; purchased IBM shares on 21-10-'11, 100 shares, @ $147, current price @ $180, gain of $33/share, total gain $3,300 / 10-14-'11 purchased 200 IBM shares, @ $191, current price @ $180, loss of $11/share, total loss $2200 / - and so on for however many individual 'lots' one has of that particular stock. ). This information is very important to me, and now i can not 'save' it.
- So I want to know how I 'fix' this - or - how I can go back to the earlier version, that did work.

To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Import FT Wizard - where's the imported site?

I downloaded the Import Front Page Site Wizard for
Dreamweaver MX 2004 and then walked through the wizard to import my
FP site. When I restart DW8, I get a message that the FP site has
been added, but I don't see it anywhere. What gives?

Yup, mpg and mpeg are the same. mpeg-1 files are roughly equivalent to VHS quality and mpeg-2 files is the format used in in standard definition DVDs. A number of the new hard drive camcorders use the mpeg-2 format, so you'll see a fair amount of discussion on the topic in these forums. The current version of iMovie (iLife08) can deal with many of these mpeg-2 files without an external conversion (I'd try the software at the Apple store before purchasing). That version of iMovie is quite different than what you have, and there are tradeoffs involved in upgrading.
John

Import sites to a Mac that already has created its own iWeb sites

Working different places I have been using iWeb on 3 different Macs. On these Macs I have created different iWeb sites, and now I would like to merge them all onto one computer, so that I can work with all of my iWeb sites from the same location. I have tried to find a way to import the sites from the other computers which I have backed up onto an external harddisk, but there doesn't seem to be any. I can easily enough move the content produced on one computer to another but that just deletes the iWeb content on the computer I am moving it to which is no good as I want to keep it.
And now we are at it: Is there a way to publish just one of the sites created in iWeb, so that you don't have to publish all seven of them every time you alter or update one of the sites?

As Wyodor mentioned iWebSites may be what you want. If your 3 sites are separate files then iWS is just the ticket IMO. Rename the three domain.sites2 files with the actual site name: site2,sites2, site2.sites2 and site3.sites2. Put them all in your User/Library/Application Support/iWeb file and launch iWebSites. From there is pretty self explanatory.
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
OT

Importing site created with other software

Hi,
I Anyone knows if Dreamweaver can import a site or pages
created with other editors, particular with Yahoo SiteBuilder, and
if it can, does it have an option of converting html code into
whatever coding it uses?
I have site site coded with free Yahoo SB and their coding
has a number of problems: such as overlapping text if viewer
increases text size (due to absolute position of text boxes) and
absense of direct access to html edit.

DW does not have the "Convert from garbage to valid HTML"
option, although
it would be nice.
Yes, that's what he means.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"lzr000" <[email protected]> wrote in
message
news:g0houd$f6c$[email protected]..
>
quote:
Originally posted by:
Newsgroup User
> Not much you can do about that. Sounds like Yahoo SB
just makes bad
> HTML/CSS. Time to rebuild.
>
>
> Darrel,
> In other words, DW does not have an option or a tool to
convert a coding
> (for
> example to convert from absolute positions to relative
and things like
> that),
> is this what you mean?
> Lzr
>
>
>

Error in Web Location path when importing Site Studio Backup Archives

Hi,
Webcenter Content version 11.1.1.5.0 running on Linux.
I have successfully (according to the archive logs) imported two Site Studio Backup Archives: Ravenna Hosting and Site Studio Samples.
I've not had a problem before with these archive files (installed successfully on my local Windows installation of 11g), but on our DEV server the Web Location path is incorrect.
Somehow the archive process has introduced the below directory structure:
/mdaw/mdax/~edisp/
Example expected location: .../groups/public/documents/wcmwebasset/oracle_logo_15h.png
Imported location: .../groups/public/weblayout/groups/public/documents/wcmwebasset/mdaw/mdax/~edisp/oracle_logo_15h.png
- The sites are visible but with broken images
- The Site Studio Assets can be seen in Site Studio Designer
- The Web Location path on all content items is incorrect and points to the wrong path
- Archive has proven to work before (same physical file) and the path information within it appears correct
Copying the files results in the images appearing but obviously the Web Location defined within the content items is still incorrect.
Whilst Ravenna Hosting site looks OK after copying the files, the Site Studio Sample site is totally broken.
Obviously the underlying import issue needs to be resolved - has anyone come across the underlying issue (the insertion of an incorrect directory structure)?
Has anyone any advice on a solution so I can re-import the archive with the files being written to the correct Web Locations?
Thanks in advance
Edited by: user615721 on Aug 25, 2011 12:26 PM

The issue is the result of a new feature introduced in version 11.1.1.4.0 called the 'Dispersion Rule'.
All legacy archive will hit this in the future release, but there is a work-around documented here: http://blogs.oracle.com/ecmarch/entry/working_with_the_new_fsp_dispe
Edited by: user615721 on Aug 25, 2011 2:09 PM

Import Site Failure -- 4 to 8

Similar Messages

Maybe you are looking for