Import Spreadsheet returns error

Hi,
I'm trying to import excel spreadsheet. For one file it works and for another it doesn't.
On examination I found that the one that doesn't work has got filters applied on some of it's columns. Is this the reason that it doesn't work.
Can anybody please let me know if that is the reason then is there any workaround.
Many Thanks,
Praj

Hi Praj,
I could not reproduce your issue. I did a test as the followings:
Create a excel , and insert a tabel
Type some value for this tabel
Filter the value on two columns
Save the excel
Create a Import Spreadsheet list using the above excel file
After creating the list, all values of the tabel in the excel displayed in the list.
What data did you use for the Import Spreadsheet list?
Which error did you meet when you imported the problematic excel file?
Please try create another excel containing same data with the problematic excel, then import it, compare the result.
If this issue still exists, please check the log file to find more information about this issue.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

1) How do I restore a spreadsheet that says "Spreadsheet couldn't be imported. An error occurred." & 2) How do I prevent this from happening?

Several times on my iPad, I have been getting the following message when trying to open a Numbers spreadsheet that I've been working on:
"Spreadsheet couldn't be imported. An error occurred."
The icon had already turned into a generic Numbers icon at that point in time, and the iPad doesn't allow me to email this file. I would then try to recover it on my iPhone, but Numbers/iCloud had already automatically deleted it. I've tried resetting my iPhone & iPad and restoring the previous day's data, but my hard-earned work was still gone!
This was a fairly large spreadsheet that I would make changes to multiple times throughout the day with either my iPhone 5 or 3rd Gen iPad. They are both updated with iOS 6.1.2 and Numbers 1.7.2, and both have iCloud turned on for syncing Numbers documents. I travel and work throughout the city on a daily basis, so I get a mixture of connection speed from LTE, 4g, wifi, to none.
I've made it a habit to make additional copies of my spreadsheets each week, and now I'm resorting to making additional copies at the end of each day. Sooner or later if this keeps happening, I may have to make annoying copies of the file every time I make a minor edit. This isn't how iCloud or anything from Apple is suppose to work. Please help out with this problem.
Thank you in advance.
Yffub

Thanks den.thed,
Apologies for not replying back sooner - I've been away.
Although your suggestion helped me in getting a copy of Lion that I could use, it didn't help with the restore from Time Capsule issue. I had to download the Lion app onto my MacBook & then transfer it across but it wouldn't let me upgrade my OS for some reason, so I ended up wiping the iMac completely and restoring via my Snow Leopard install disk. For some reason, this time, it let me have the option of using Setup Assistant to access the Time Capsule for a complete restore.
Now, over a week later, with various bits of tweaking and reinstalling some apps that didn't seem to come across, I have my system back.
Thanks for the help anyway.
Cheers,
Paul

Jdev EA1 return error in running an already tested war file (imported war )

Hi
Thank you for reading my post.
I have an Odd problem with Jdev EA1
I have a war file , I import it into Jdev (new /project/projects from war file)
I should mention that this war file developed in Rational application developer (Struts based ,database, higly use of other Taglibs)
Now when i try to run my imported application , it does not run at all, it stops with some errors :
for example in compiler log it return error for following line :
     <logic:redirect page="<%=session.getAttribute("LastPage").toString() %>" />
[/Code]
the error is :
     Error(29): Attribute: LastPage").toString() is not a valid attribute name
        Error(29): Attribute: % is not a valid attribute name
        Error(30): Encountered end tag </logic:present> without corresponding start tag.
Also it returns :
     Error(32): Tag attempted to define a bean which already exists: currentModel
        Error(33): Tag attempted to define a bean which already exists: currentName
for the following code :
[CODE]
<logic:equal name="Language" value="en">
     <SCRIPT SRC="language-en.js"></SCRIPT>    /////line 32
     <SCRIPT SRC="ctst.js"></SCRIPT>               ////line 33
</logic:equal>I import it into netbeans and it run correctly on tomcat, i deploy it inot sun Java apps and it works ok.
Even i tried Jboss , geronimo to test my application corectness
Can you tell me what is wrong ?

Hi
I think its serious , Jdev Does not works correctly with a correct war file ,
some one from Jdev team should think about it.

When attempting to open a spreadsheet, I get a pop-up that says "Spreadsheet could not be imported. An error occurred" Anyone have any ideas??

When attempting to open a spreadsheet, I get a pop-up that says "Spreadsheet could not be imported. An error occurred" Does anyone have any ideas on why this is happening?

I am unable to read any Numbers files in any app, other than the Apple Numbers app, on an iPad using v7.0.2. I can still view them on an iPod using v6.1.3.
Something has changed but I am unable to figure what.

Import expoort wizard error on sql server 2008r2

- Executing (Warning)
Messages
Warning: Preparation SQL Task 1: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done. (SQL Server Import and Export Wizard)
Warning: Preparation SQL Task 1: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done. (SQL Server Import and Export Wizard)
- Copying to `tblSFUpload` (Error)
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (615)" failed because error code 0xC020907B occurred, and the error row disposition on "input "Destination
Input" (615)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - tblSFUpload" (604) failed with error code 0xC0209029 while processing input "Destination Input" (615).
The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - tblSFUpload" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine
called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
- Post-execute (Success)
Messages
Information 0x4004300b: Data Flow Task 1: "component "Destination - tblSFUpload" (604)" wrote 65535 rows.
(SQL Server Import and Export Wizard)
Can someone tell me what to do with this please?

Hi faiz,
>>Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
According to this message, it can be caused by that there is not enough memory available or the buffer size is too small. To resolve this issue, I recommend you perform the following steps.
1. Change the Server memory configuration of the SQL server. For example, you can increase maximum memory via the following scripts. For more information, please review this article:
Server Memory Server Configuration Options.
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'max server memory', 4096;
GO
RECONFIGURE;
GO
2. Adjust the buffer size by increasing the DefaultBufferMaxSize and DefaultBufferMaxRows properties of Data Flow tasks. For more information about it, please review this article:
Data Flow Performance Features.
Thanks,
Lydia Zhang

The operating system returned error 23(Data error (cyclic redundancy check).)

My Stored Procedures and Jobs Showing this Error. Even though i can able to access the data throgh SSMS in Database Engine.Please help on this.
Executed as user: RMS\Administrator. The operating system returned error 23(Data error (cyclic redundancy check).) to SQL Server during a read at offset 0x000006684a2000 in file 'F:\RMSLiveData\RMS.mdf'. Additional messages in the SQL Server error log and
system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors;
for more information, see SQL Server Books Online. [SQLSTATE HY000] (Error 823). The step failed.
Thanks
RehaanKhan. M

DBCCCHECKDB('DBNAME',REPAIR_ALLOW_DATA_LOSS)
For crying out loud! Don't you have any shame!
There are situations where you may have to run DBCC CHECKDB with the option REPAIR_ALLOW_DATA_LOSS, but it is not the first thing you shold try if the database seems to be corrupt. Particularly, you should first make sure that you work on a copy of the database
files. REPAIR_ALLOW_DATA_LOSS means that DBCC CHECKDB has carte blanche to throw all pages it can piece together - which could be about all data pages if it is that bad.
Corruption siuations are very difficult to assist with in forums, because there can be a lot of stake. The only advice I can give is to restore the database from a clean backup. If you don't have a clean backup, you have a problem. The database may still
be saved, but you need an expert on site to help you, if you have never worked with this before. Advice given in this forum applied haphazardly can result in more damage that you already have.
But, oh, one thing: this type of corruption are always due to hardware errors like bad disks or bad memory sticks. So just restoring the database is not enough. Finding new hardware is important too.
Erland Sommarskog, SQL Server MVP, [email protected]
Actually on the same disk there are other Databases Stored and they work Properly and Backup also can be taken for that Databases. But, for this particular database only this error is happening when iam trying to take backup. But data retrieval and access to
front end application happening as usual. Please help on this.
RehaanKhan. M

Import Spreadsheet App not working

I am trying use the Import Spreadsheet App in Sharepoint 2013 and always get the same error:
"Could not lead an object because it is not available on this machine"
This was working on a previous install of SharePoint 2013 I had.
Is something not installed or configured?
I am using IE 11 and have the sharepoint site in trusted sites?
Please help.

Have you checked the ULS logs? Also, this could be due to your office add-ins being corrupted... maybe try clearing your IE cache (including addins), and if that doesn't work an office repair may help. Also make sure that you are using the 32-bit
version of IE and not a 64 bit version (I've seen cases where windows "Pins" the 64 bit version as the default version on your task bar, so check IE version (it will say 64 bit if it is using x64), and make sure you are using 32-bit.

Import wizard logon error

When attempting to log onto a system using the cluster name, the Import
Wizard returns the following error:
Error logging on to server. Check logon information and try again.
(IWZ 00001)
Unable to connect to cluster <cluster name:port number> to retrieve CMS
member list. Locally cached member list not present. Logon cannot

IW works by making a connection to a CMS I don't think it was designed for or recommended to try to have it bounce between CMS's. Even if you could get this to work I would imagine it could cause data integrity problem trying to keep up with which CMS is transferring to where...
Use the CMS name
Regards,
Tim

Transporting OSS Notes from Dev to QA returns error

Hi,
I have implemented all these notes in Dev:
1448397
1453128
1462423
1465685
1472991
1478699
1486208
1490183
1495277
1512748
1540869
1550964
1558355
1564254
1568563
1575454
I don't get any error during implementation in Dev.
When transport to QA, it returns error like:
Authorization check CP_USER_INCL:
Navigation path 48469D158E5D0117E10000000A421694 does not exist
Authorization check O_INCL_1:
Navigation path 488D143E21166CB2E10000000A421693 does not exist
Authorization check S_ALL_1:
Errors occurred during post-handling ESH_OM_TRANSPORT_IMPORT for SEST L
ESH_OM_TRANSPORT_IMPORT belongs to package S_ESH_ENG_OBJ_MOD_REP
The errors affect the following components:
BC-EIM-ESH (NetWeaver Enterprise Search)
After the transport failed, I couldn't access ESH_COCKPIT anymore.
It will return a dump saying:
System with connection GUID xxx has no connection data.
I tried to delete search connector via SE38 ESH_ADM_INDEX_ALL_SC also return the same error.
Anyone experienced this before?
I have already raised an OSS message to SAP waiting for their reply.
Thanks
Jack

Quote from the OSS message:
1457940 Transporting software components: Error in after-import
1476894 Transporting software components: Paths are lost
The reason for the error messages was a problem with the sequence
of the handling of the involved entities like templates, authorization
checks etc.
I see no harm in implementing the following additionally
1465481 Transporting software components: Dump in after import
1441080 Termination when importing Enterprise Search models
Regards
Jack

Creating a DC return Error

Hi,
I've configured NWDI. I added my new SC I've created via SLD into "Software Components for Development" section while creating Track Data on CMS.
But I left empty of the section "Required Software Components" on Track Data.
I'm writing above to be sure if this is the cause.
Then I've opened NWDS and connected to Development Configuration I've created. I've imported Dev. Conf. and tried to add a new DC under Compartment.
But it returns errors like below which I've noticed at "General User Output" area of NWDS at "Development Configurations Perspective".
failed to resolve reference "sap.com/com.sap.mw.jco" for DC "temsa.com_PCC_1:temsa.com/testdc":Cannot find compartment of used component: sap.com:com.sap.mw.jco
failed to resolve reference "sap.com/com.sap.exception" for DC "temsa.com_PCC_1:temsa.com/testdc":Cannot find compartment of used component: sap.com:com.sap.exception
failed to resolve reference "sap.com/com.sap.aii.util.misc" for DC "temsa.com_PCC_1:temsa.com/testdc":Cannot find compartment of used component: sap.com:com.sap.aii.util.misc
What can be the problem?

Hi Huseyin,
The problem is what you have mentioned. You need to define the dependency that your software components has on the three required SC's. Also you then need to checkin the three base SCA's into your track.
Please refer to help or search in this forum and you will know all that is required before you start developing the development component.
Regards
Sidharth

Numbers spreadsheet load error.

Hello guys,
a have a problem with one of my spreadsheets in numbers. I have it stored on my iPhone 4 and iPad 2 through iCloud.
When I tried to open it on the iPhone a message popped up:
"Spreadsheet couldn't be imported.
An error occured."
Since then the spreadsheet does'n exist on my iPad, and on iCloud.com, only on the iPhone but it doesn't open.
I have to say that don't own a Mac or MacBook.
It's an important spreadsheet for me.
Thank you,
Victor

Wish me luck, I threw it out... I got a backup if i need it but I got sick of seeing it in console every 10 seconds.
Pray that my Mac does not go nuclear!

RVTSH-189: Subroutine rvtshiline() returned error

HI everyone,
Iam trying to import reciept data from RCV_HEADERS_INTERFACE AND RCV_TRANSACTIONS_INTERFACE to base tables.
But when iam running the concurrent program receiving transaction processor, it is completing successfully. But in the PO_INTERFACE_ERRORS iam getting the below error.
RVTSH-189: Subroutine rvtshiline() returned error
Cause: Subroutine rvtshiline() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator for
Any help regarding above would be helpful to me.
PS:I have seen threads regarding this error but iam unable to find solution.

HI sandeep..
My problem has been solved. During inserting into RCV_TRANSACTIONS_INTERFACE, I haven't inserted the VALIDATION_FLAG column. After inserting the column the base tables are populated.
Thank you
with regards
vijay
Edited by: vi**** on Sep 14, 2011 11:11 PM

ParseInt( string ) returns error....

import java.lang.*;
String myString = "231";
int myInt = parseInt( myString );
returns error....
I was hoping it would return a decimal integer.
what am I doing wrong... I am using jdk1.5.*

I thought that I didn't have to write the
e ClassName.function().... if I imported the
Class...Easy mistake to make when it's all new.
Importing is a way of saying "I want to use this class". But, if you want to use the methods and/or properties of that class, you need to reference it. You need to tell the compiler which class/object your "parseInt" method is drawn from.

The software change returned error code 0x87D0128F (-2016406897)

Hi all,
We are currently using Admin Studio 2013 to create App-V applications (which in turn uses the Microsoft App-V 5.0 Sequencer running through AAC). I have noticed that the last few applications that have been sequenced, when deployed via SCCM 2012 have
the following error:
The software change returned error code 0x87D0128F (-2016406897)
Now, we have tested these applications on a vanilla Windows 7 SP1 OS using the AppVLauncher and the application launches as expected. The issue seems to be with the app deployment. I have read a couple of articles about this (slim picking) and
one suggested the shortcut could have an extra space at the start. This is not the case for my apps. Also the other suggestion is changing the Enable Scripting registry key, but again this did not work.
Has anyone else seen this problem and have a solution?
Ta

Thanks for replying Torsten,
This is the error log I get. Not quite sure how to diagnose the issue:
+ CategoryInfo : InvalidResult: (:) [Add-AppvClientPackage], Clie
ntException
+ FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientP
owerShell.AddAppvPackage
]LOG]!><time="16:16:49.418+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appexcnlib.cpp:441">
<![LOG[AppV command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage -Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'
-DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] failed with return code 1.]LOG]!><time="16:16:49.419+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvcommandutil.cpp:128">
<![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="16:16:49.420+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvcommandutil.cpp:154">
<![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="16:16:49.421+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvmanage5x.cpp:86">
<![LOG[ CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="16:16:49.422+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appv5xhandler.cpp:646">
<![LOG[++++++ App enforcement completed (5 seconds) for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" [ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e], Revision: 1, User SID: ] ++++++]LOG]!><time="16:16:49.427+00"
date="11-19-2013" component="AppEnforce" context="" type="1" thread="2532" file="appprovider.cpp:2366">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="17:10:13.543+00" date="11-19-2013" component="AppEnforce" context="" type="1" thread="4828" file="appvpackagequery5x.cpp:177">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:36.192+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:36.259+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
<![LOG[+++ Starting Install enforcement for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" ApplicationDeliveryType - ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, Revision - 1, ContentPath - C:\WINDOWS\ccmcache\y,
Execution Context - Any]LOG]!><time="10:46:37.834+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:1643">
<![LOG[ A user is logged on to the system.]LOG]!><time="10:46:37.916+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2014">
<![LOG[ Performing detection of app deployment type 00031_SolidWorks_eDrawings_2014_EN_R01(ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, revision 1) for system.]LOG]!><time="10:46:37.927+00"
date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2079">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:38.236+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2280" file="appvpackagequery5x.cpp:177">
<![LOG[ Installing App-V 5.X package 00031_SolidWorks_eDrawings_2014_EN_R01 (DTId = ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, Revision = 1)]LOG]!><time="10:46:38.245+00" date="11-20-2013"
component="AppEnforce" context="" type="1" thread="2500" file="appv5xhandler.cpp:422">
<![LOG[Running App-V command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Get-AppVPublishingServer | Remove-AppVPublishingServer
] for the machine]LOG]!><time="10:46:38.246+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvcommandutil.cpp:117">
<![LOG[ Executing Command line: "C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Get-AppVPublishingServer
| Remove-AppVPublishingServer with system context]LOG]!><time="10:46:38.247+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:345">
<![LOG[ Process 4356 terminated with exitcode: 0]LOG]!><time="10:46:43.218+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:431">
<![LOG[The AppV 5X client is configured for use with ConfigMgr.]LOG]!><time="10:46:43.219+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvclientconfig5x.cpp:64">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:43.245+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
<![LOG[Package: 00031_SolidWorks_eDrawings_2014_EN_R01 with version GUID {7013821C-844B-46E4-B3DB-380B65BF93CF} is not installed. Will install it]LOG]!><time="10:46:43.246+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500"
file="appv5xhandler.cpp:459">
<![LOG[Configure the package 00031_SolidWorks_eDrawings_2014_EN_R01 as download and execute]LOG]!><time="10:46:43.249+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appv5xhandler.cpp:468">
<![LOG[Running App-V command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage -Path
'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv' -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] for the machine]LOG]!><time="10:46:43.255+00" date="11-20-2013"
component="AppEnforce" context="" type="1" thread="2500" file="appvcommandutil.cpp:117">
<![LOG[ Executing Command line: "C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage
-Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv' -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml' with system context]LOG]!><time="10:46:43.256+00" date="11-20-2013"
component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:345">
<![LOG[ Process 4120 terminated with exitcode: 1]LOG]!><time="10:46:45.438+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:431">
<![LOG[Here is the error message generated by the process:
Add-AppvClientPackage : XML document could not be loaded because it is
invalid. Please supply a valid XML document. Please consult AppV Client Event
Log for more details.
Operation attempted: Configure AppV Package.
AppV Error Code: 050009000A.
Please consult AppV Client Event Log for more details.
At line:1 char:106
+ import-module 'C:\Program Files\Microsoft Application
Virtualization\Client\Appv ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidResult: (:) [Add-AppvClientPackage], Clie
ntException
+ FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientP
owerShell.AddAppvPackage
]LOG]!><time="10:46:45.442+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appexcnlib.cpp:441">
<![LOG[AppV command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage -Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'
-DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] failed with return code 1.]LOG]!><time="10:46:45.443+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvcommandutil.cpp:128">
<![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="10:46:45.444+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvcommandutil.cpp:154">
<![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="10:46:45.445+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvmanage5x.cpp:86">
<![LOG[ CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="10:46:45.446+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appv5xhandler.cpp:646">
<![LOG[++++++ App enforcement completed (7 seconds) for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" [ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e], Revision: 1, User SID: ] ++++++]LOG]!><time="10:46:45.450+00"
date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2366">
Just to add to this I have also managed to install the application from the downloaded content from SCCM. By that I mean I go into the cached folder and run the app-v launcher, load and install the application and it works correctly. Therefore
it must be something to do with the launch command through SCCM?

Returning Errors from a webservice using XMLBeans

I have a webservice that accepts XML as input and output parameters, and I'm using XMLBeans to handle this. I'm trying to work out how I can return error information from the webservice, so I created an Exception.xsd schema and 'include' it in the output XML Schema, so an exception xml element is valid in the output schema. The problem is, the XMLBean class generated from the output XML schema has no methods that allow me to create an Exception element. Is there some other way of handling the return of exceptions from webservices using XML?

The answer is just throw a SoapFaultException and put the exception.xsd XMLBean in the FaultDetail section of the SoapFaultException.

Import Spreadsheet returns error

Similar Messages

Maybe you are looking for