Import Stichwörter Dateibrowser CS in Bridge CS2

Hallo,
auch wenn im englischen FAQ die Anleitung steht, so ist es mir doch nicht gelungen nach dieser Anleitung das Problem in der deutschen Version CS2 zu lösen.
Also, wer kann helfen? Ich möchte die Stichwörter aus der Datei Stichwörter.psp (Dateimanager der CS Version)in Bridge CS2 Version importieren. Die automatische Konvertierung bei Neustart von Bridge (Adobe Bridge Keywords.xml vorher gelöscht) passiert so nicht.
Danke für jeden Tipp,
Uwe

Exportiere doch die Stichwörter, mit den anderen Metadaten als XMP-Sidecar-File im Ordner wo die Dateien gespeichert sind. Soviel ich mich erinnern kann, ist das eine Voreinstellung im Dateibrowser, wo man einstellen kann, ob diese Daten zentral oder verteilt gespeichert werden. Ist halt schon sehr lange her Photoshop CS. Diese Sidecar-Files werden dann auch von Bridge CS2 und CS3, bzw. Lightroom eingelesen.
Noch besser wäre es meiner Ansicht nach, die XMP-Daten in die Dateien hineinzuschreiben. Das geht aber bei PSCS noch nicht bei so vielen Dateiformaten wie das mit der aktuellen Version geht.

Similar Messages

Bridge CS3 und Stichwörter aus CS 2

Hallo Freunde des Fotografie-Forums,
hoffe durch Eure Hilfe schell eine Lösung für mein Problem zu finden.
Habe in der vorigen Woche PS CS3/ Upprade von PS 7/ installiert.
Bis dorthin wurde CS2 genutzt und Bridge als Sortier -und Verschlagwortungstool
genutzt. Vor allem die Stichwortvergabe hat es mir angetan und meine DNG`s waren in kurzer Zeit reif für das Archiv.
Bridge CS3 erkennt zwar meine Stichwortsets und Stichwörter( neu: Stichwort und untergeordnetes Stichwort), möchte ich aber ein Stichwort durch Anklicken zuweisen übernimmt Bridge CS3 für kurze Zeit diese Eingabe und verschiebt dann das Stichwort in sonstige Stichwörter.
Habe darauf CS 2 inclusive Bridge CS2 deaktiviert und händisch vom Rechner gelöscht.
Alle Stichwörter unter Bridge CS 3 sind ebenfalls gelöscht.
Möchte ich nun die Stichwortlisten neu erstellen( alle Listen in Exeltabellen gesichert), z.B. Kategorien als Stichwort und Lebensmittel, Food, als untergeordnetes Stichwort verschwinden diese wie von Geisterhand aus meiner Liste.
Neue Stichwörter die unter CS-2 noch nicht genutzt wurden, verbleiben unter Bridge CS3 und können in gewohnter Weise verwandt werden.
Die Bridge Hilfe hat mich leider nicht schlauer gemacht.
Grüsse aus Kleinmachnow
Mein System: Intel Mac Pro 2x 2,66 Ghz, 10.4.10,

I solved it...
Bridge will not run if there is a partition present that the current logged in user cannot access.
This means hidden, read-only, or unsupported partitions (NTFS for those with bootcamp) will cause this failure. It appears that Bridge MUST be able to read and write to every partition (including completely empty ones) at startup or it will fail without any intelligible error.
Patching only makes the crash report message disappear. Still fails until you change rights.

Stichwörter in Bridge in Elements 6 / MAC

Wer weiss, wie ich Stichwörter in Bridge/MAC zuordne? Bis Version 5 (Windows) ging dies durch Drag&Drop, was hier nicht zu funktionieren scheint.
Danke im Voraus!

[email protected] wrote:
> Yes, if you don't have the uninstaller for the trial version (you didn't save the download) or if it doesn't work, just trash the program. It's preferable to use the uninstaller since Adobe installers strew stuff all over the hard drive rather than following the mac developer guidelines for putting everything into a neat package, but cleanscript will nuke all the adobe stuff it can find, so hopefully it will get the trouble-causing bits.
>
> You would have had exactly the same problem with the trial version of PS and the retail version, on both platforms, incidentally. That's why Adobe wrote the cleanscript.
>
> There are often conflicts between the Adobe installers for recent versions of PS/PSE and things already in your user folder. Rather than try to root through all those thousands of files to figure out where exactly the conflict lies, it's easiest to create a new virgin user folder for the install, but you can wait to see if you have trouble running from your existing account if you want.
Thank you Barbara for your help. I finally got rid of the trial version
and installed the purchased software after running the cleanscript. (I
did not need to create an additional user).

Stichwörter in Bridge CS3 im/exportieren

Guten Tag zusammen
ich habe ein Problem.
Wenn ich im Register "Stichwörter" das Menü aufmache, habe ich nur folgende Einträge: "Neues Stichwort - Neues Stichwortset - Umbenennen - Löschen - Suchen ...".
Die Einträge "Importieren... - Leeren und Importieren - Exportieren ..." fehlen! Ich hatte die aber schon einmal. Ich hatte damit schon einmal gearbeitet.
Was ist passiert. Was muss ich machen, damit ich meine Stichworte wieder im- und exportieren kann?
FM Schwartz

Allright. I'we installed 4,6 - I reset the camera defaults from the fly out menu, and auto tone is not on. (only the "Apply grey scale mix, when converting to greyscale")
In Bridge "High quality thumnails" is checked.
Yammer, you wrote:
"Go into the Camera Calibration tab in Camera Raw, and select the Camera Standard profile (Adobe's best estimate of the in-camera processing), and then save it as Camera Raw Default (from the flyout menu). [it's worth noting that there are two options in ACR preferences which create multiple defaults, based on ISO and camera serial - clear these if you use only one camera]"
When I go into the camera calibration tab in the Camer raw panel, I get two options: ACR 2,4 or ACR 4,4.
There is no "Camera Standard profile" to choose.
When I save it, it seems like it only applys this setting to the specific image, that I have open in the camera raw panel.
I dont see how to clear the other option.
I guess, its normal, that you see a difference in jpgs and raw files, since the camera doesnt process the raw-files. I (and also an instructor at a photo workshop I attended) - just think its way too much. The instructor, beeing a professional photographer and a user of PS - couldnt figure out the problem thoug
I uploaded a couple of photos. The one at the top, is the raw file, that I opened in camera raw - did nothing to, and saved as a jpg. (this one is not too bad, but sometimes, it really messes up the colors.)
The one belowe is the jpg-version, that I just saved.

Keyword Exchange between Bridge CS2 and Lightroom

Hello,
I was was using bridge CS2 to sort my pics with keywords and EXIF and now switched to lightroom. When I imported the pics everything was OK, data were taken over. When I now use bridge to add new keywords they are not recognized in lightroom and vice versa. Since I want to use both programs in the future how can I "synchronize" data like keywords or EXIF ...
I would be VERY glad if someone could help!!
Kind regards from Germany
Stephan

Yes, but as far as I understand this feature exports/imports all your keywords in a list but not the assingments you made to a photo. For example if I have a photo in bridge with people whose names were newly assigned as keywords. Now I open LR but nothing has changed to the keywords of that picture. So what can I do to synchronize the keywords of the pics (newly assigned/added keywords in bridge to LR or vice versa)?

Bridge CS2 InDesign Contact Sheets

I create Contact Sheets in InDesign through Bridge (CS2) for EPS files many times a day. To get the EPS files to import to the contact sheet I have to add the file type to the File Type Filter (under Files...) every time I create a contact sheet. Is there a way of changing the script so that the EPS files will automatically be included in the File Type Filter? I have no experience with scripting and am having a hard time finding information on this topic.
Thanks for any help you can offer!
Melissa

Melissa,
Open up AdobeScriptLibrary1.jsx in a text editor (Adobe's ESTK is a great one for editing scripts).
Look at around line 368 or search for:
TYPES.DEFAULT_CONTACTSHEET
you should see a line like:
TYPES.DEFAULT_CONTACTSHEET = "JPG,JPEG,TIF,TIFF,GIF,AI,PSD,PDF,";
Just add eps, epsf to the list.
TYPES.DEFAULT_CONTACTSHEET = "JPG,JPEG,TIF,TIFF,GIF,AI,PSD,PDF,EPS,EPSF";
Then restart bridge.
That will do it for you.
Bob

Conflict Between Aperture and Photoshop/Bridge CS2?

Recently, I noticed a problem in Photoshop/Bridge CS2, that I think may be caused by Aperture.
I shoot D2x .nef's that are fully supported by both programs.
Here's what's happening.
If I go into Bridge and go into a folder of images, some show up as images and others as generic .nef icons. They cannot be opened by either Bridge or ACR. Everything in the CS2 Suite is up-to-date.
After purging all the Bridge caches, and finally reinstalling the entire CS2 suite, I noticed something:
The files that were not working in ACR or Bridge were files that I had played with in Aperture. They are in my Aperture library (wherever that is).
Is there any way that this can be the problem I am trying to solve? If so, how do I get Aperture to "let go of them"? To forget it ever touched them?
I love Aperture, am loyal to Apple, am not unhappy that I invested in this program and am sure it will improve. But, I really need to be able to use all of my images in ACR. Right now, that is my priority.
Thanks in advance for suggestions and help.
sjh
Dual G5 2.5, 12"PB Mac OS X (10.4.3)

I'm not sure I know enough to answer the question.
The images are on my G5 on a second internal hard drive (not the boot drive).
They are in a folder with a lot of images from the same shoot.
That folder shows up in the Library in Aperture, also. I think I imported them. But, as best I can tell, they do not "only exist in Aperture" because I can see them, and their .xmp files in the original file on the second internal hard drive.
Thank you so much for trying to help.
sjh

Bridge CS2: Stichworte und Dateiinformationen aus verschiedenen Verzeichnissen

Adobe bridge CS2
Ich lege monatlich ein neues Directorie an. Alle Aufnahmen werden mit Stichwörtern und Metadaten versehen. Klar, dass die Suche in dem betreffenden Verzeichnis funktioniert. Aber, ich möchte über mehrere Verzeichnisse suchen. Wer kennt eine Möglichkeit, das zu erreichen ?
[email protected]
Mediendienst Fink

Unable to set some dates in Adobe bridge cs2

HI ALL
Our keywording team using the Adobe bridge CS2.
Kindly hep me to understand Why some dates Like
1/1/1970
1/1/1642
1/1/1890
etc .....
I unable to set in ITPC image Tab information .............
Lakhan

Hi
Thanks for revert ......
I tried with CS2 & CS3 but only specific dates like (1/1/1970) i above mentioned is still not reflecting in IPTC image info ........
Please suggest....

Adobe Bridge (CS2) not working. Even after new installation

Hello,
The Problem was, that Adobe Bridge (CS2 on Windows XP) suddenly stopped the work. After several days of trying to get this program to run again, i deinstalled and installed Photoshop with all it´s programms.
But Bridge still is not working anymore. I can visit some folders once or twice, but after 2 tries, it stopps and give no reaction.
What is wrong with Photoshop ?
regards

You need to reset Bridge preferences by holding
Ctrl+Alt+Shift while starting the program from the icon. You should get a dialog offering three choices select all of them.
This does not happen with a re-install of the program.
If you don't get the dialog box, keep trying till you do.

Displaying thumbnails in Bridge CS2

Hello, I've organized the photos from my Canon Digital Rebel XT in Adobe Bridge CS2 (Version 1.0.4.6) for years without a problem. I shoot in RAW and those files are approx. 7 MB in size. I recently received a Canon T3i and the files sizes are approx. 3 times as large and I'm having trouble getting Bridge to display a thumbnail. I can't imagine it's a file size issue since I routinely have .psd files that are 70 MB and larger that I have no trouble having Bridge display a thumbnail. The photos from both cameras are CR2. Is there a settings in Bridge I should adjust?
Any other ideas why I can't get the photos from the new camera to display as thumbnails in Bridge?
Thanks for your help :-)

Geoffrey,
Geoffrey Hudson wrote:
…The photos from both cameras are CR2…
The fact that they have the same extension is irrelevant. The files are fundamentally different.
The Canon T3i was supported for the first time in ACR 6.4 and later, which only run with CS5.
There is and there will be no version of ACR that will work with Bridge CS2 to open files from the T3i.
Your only option would be to use the free Adobe DNG Converter to convert your raw CS2 files to raw DNGs that you can then open in CS2.
If you have an Intel Machine, you want version 6.6 of the Adobe DNG Converter. If your machine is older than the Intel Macs, e.g. any kind of Power Mac, then you need version 6.4 of the free Adobe DNG Converter, as later versions will not run on non-Intel machines.
Wo Tai Lao Le
我太老了

Error Message when starting Bridge CS2: "create redeclared"

I get this "create redeclared" error message on the following line of code:
var labelMenu = MenuElement.create( "command", "Label", "at the end of Thumbnail");
but then this function and all others work just fine afterwards. Is there a way to either fix the error or suppress this warning? It's really more of an annoyance than anything else.
I'm using Bridge CS2 1.0.4.6

This happens if you try to create a menu that already exists. Use MenuElement.find() to avoid re-creating a menu with the same ID.
-David Franzen
Adobe Bridge Quality Engineering
Adobe Systems, Inc.

Bridge CS2 - files over a network

I have been using Bridge CS2 for a while now. It is mainly used for the preview and management of RAW files. Until recently, the files have been located on the local drive (C:) and there has been no issue. However, I have recently, for security reasons, moved all of the files onto a Linux file server. Ever since then, it has been painfully slow using Bridge, infact it crashes infrequently.
I know that the solution may seem obvious - the file transmission is being slowed by the network/server. However the network runs a gigabit LAN with a gigabit switch between the two machines. The physical location of the server is less than two meters from the workstation, and I can confirm that the LAN is infact running at 1000 (monitoring via task manager of file transfer in Explorer between two machines). Regardless, even at 100bit LAN, Bridge should still be running smoothly.
I copy the RAW files (about 12meg each pic) onto the server, and then open Bridge and it takes about 10mins to load up about 100 files.
I have tried clearing the cache, and running the cache on both the local and network machine, and all of the this suggested by Adobe http://kb.adobe.com/selfservice/viewContent.do?externalId=317912.
As far as I can tell, Bridge is taking a long time to build the thumbnails. I have even tried turning off anti-virus and firewall, but there is no difference. Every other network activity takes little/no time and I need this to work smoothly. Surely I don't have to restrict to local files!
Please help me! Do I need to change any settings? Is it normal for Bridge to take so long over a network?

I realise that operating over a network is never faster than a local drive, however using a gigabit LAN and dedicated file server should be the closest thing to running a local drive, if not as fast as a USB2.0 drive (which runs at 480Mbps).
I have however been able to solve the problem. I am not sure if this is an actual "fix" but I did a few things:
1) I unmounted the network drive and remounted it using SUBST (ie "SUBST X: C:\directory\path")
2) I cleared the cache for both Bridge and the Camera Raw ("C:\Documents and Settings\ [user] \Application Data\Adobe\Bridge" & "C:\Documents and Settings\ [user] \Application Data\Adobe\Camera Raw"); then
3) I rebooted all machines (including the sever with "sudo shutdown -Fh now"); and finally
4) After reopening Bridge the first time I closed it down again and cleared the cache again.
Now it works perfectly - infact it is very close to the speed it was working with the local drive. The cache build very fast and there is no more hanging or crashes, and I am back to the old Bridge!!

LR adjustments not showing up in Bridge CS2

When working with .DNG files in LR, it seems that Develop settings show up in Bridge CS3 (beta), but only some show up in Bridge CS2; the same is true for metadata, but only sometimes -- keywords tend to show up, Location, City, etc. don't. Using the "Export XMP Metadata to File" doesn't seem to make a difference.
For example: if I adjust the contrast, then export xmp, I can see the difference in Bridge CS3, but not CS2. But if I change the white balance, the change shows up in both versions of Bridge.
Any thoughts?
Thanks,
Martin

Brilliant, Geoff! I had downloaded ACR 3.7 for the DNG converter, but apparently hadn't installed it for Bridge/Photoshop CS2, which were still using 3.6. I used "updates" in the Help menu, and 3.7 was installed automatically. All of the LR adjustments now show up in Bridge CS2.
Thanks!
Martin

Xap rating metadata lightroom bridge cs2

Is there anyone out there who can tell me why the xap metadata is written so differently in lightroom jpegs as compared to bridge CS2?
I've had writtena feature on my dynamic gallery on my website that reads the xap rating in bridge-produced jpegs, but doesn't work with lightroom produced ones. When I read the metadata from the 2, the structure was totally different. I dont suppose anyone from the development team would care to tell us how lightroom and bridge CS2 read the different xap structures - it would give me a clue how to re-write the function on my website.
Also are there plans to make the current structure standard? Does bridge CS3 for instance produce jpegs with the same structure in the metadata?
Thanks!

Yup, Bridge is just a Browser. ACR and Photoshop do the work.
AFFAIK.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.10 & Win XP, Pentax *ist D
See LR Links list at my
Blog for related sites.

Import Stichwörter Dateibrowser CS in Bridge CS2

Similar Messages

Maybe you are looking for