Import stops after a minute or so.

I am trying to import video from my TV but iMovie stops importing after a minute or two. I am using a converter box (Miglia Director's Cut) and have a DVR (Digital Video Recorder) as my source.
I have the video and audio cables out from the DVR going into the Miglia box. This is connected to my Mac Pro via firewire. When I open iMovie, it tells me a camera is connected. When I click Import, I begin to see the TV show that is playing on my TV/DVR. All is well for about a minute, then iMovie just stops importing. The time varies. Sometimes I get a one minute and 40 seconds clip, other times I get less than a minute. I can't figure out why it does this. Any help??
Or.. are there any other video capture applications I might use besides iMovie?
Thanks for any advice.
nÔÔdle--hëad Per-rrr-plexed

This is a me too message. I suspect it is a Dolby digital problem. The picture has been rock solid so far. I'm using Youview.
I have a followup and a workaround to this problem
I contacted BT and they are convinced that the problem is due to the powerline adaptor, which was supplied by BT along with the Youview box. They tell me that their technical help files state there is not enough bandwith available. They are going to send me, free of charge, a 10 metre ethernet cable for a direct connection to the router. I was very sceptical when I was told this over the phone and my subsequent action below confirms my scepticism.
After the call, I tried the following setting change on the Youview box. I went to settings>tv signal & quality>HDMI Audio format and changed this from surround to stereo. This effectively turns off the dolby digital output. The problem disappears! Of course, this turns off dolby output for all HD channels on the box which is not desirable.
This makes me convinced it is a dolby audio problem but getting BT to recognise this might be more difficult. I hope they can fix the problem soon.

Similar Messages

Songs stop after a minute of play

I just downloaded an album on iTunes and some of the songs stop after a minute and move on to the next song. I'm having a real tough time finding an answer to this one. Does anyone know of a fix for this? Maybe a re-download?
Cheers!

Solved it! Thanks.

BT Sport HD: sound stops after a minute or so

Hi
Firstly I was impressed with the launch show last night - well done BT!
I have a YouView box and Infinity BB. I tried to watch BT Sport 1 on HD (channel 510), but after a minute the sound stopped. I could change channels and then come back to 510 and the sound would be there, but again would stop after a minute or so. This happened on all the Sport HD channels.
Note that the SD Sport channels (507 - 509) were absolutely fine.
I tried re-booting the box, but it didn't solve the issue.
Has anyone else had this problem?
Thanks
Simon

This is a me too message. I suspect it is a Dolby digital problem. The picture has been rock solid so far. I'm using Youview.
I have a followup and a workaround to this problem
I contacted BT and they are convinced that the problem is due to the powerline adaptor, which was supplied by BT along with the Youview box. They tell me that their technical help files state there is not enough bandwith available. They are going to send me, free of charge, a 10 metre ethernet cable for a direct connection to the router. I was very sceptical when I was told this over the phone and my subsequent action below confirms my scepticism.
After the call, I tried the following setting change on the Youview box. I went to settings>tv signal & quality>HDMI Audio format and changed this from surround to stereo. This effectively turns off the dolby digital output. The problem disappears! Of course, this turns off dolby output for all HD channels on the box which is not desirable.
This makes me convinced it is a dolby audio problem but getting BT to recognise this might be more difficult. I hope they can fix the problem soon.

When I play any video with any player, it stops after few minutes

When I want to play any video it stops after few minutes as freeze. Sometimes it continues without sound and others stops completly. I try to play it with more than one players, but same.
The video it's .mkv
I tried with:
- Quicktime X with Perian
- MplayerX
- Mplayer OS X Extended

You should probably take it to the closest apple retail store and have someone at the genuis bar help you. If you dont want to do that you should probably purchase a software or use a free trail version of one to run a virus check.Ive found that Mcfee is a good virus scan program.

I have Snow leopard, 10.6.8 on my iMac, I just tried to install Lion from the App store, but during proces, the install stops after one minute saying: "software might be damaged". I downloaded the software again, same thing. What must I do to install Lion

I have Snow leopard, 10.6.8 on my iMac, I just tried to install Lion from the App store, but during proces, the install stops after one minute saying: "software might be damaged". I downloaded the software again, same thing. What must I do to install Lion? I have still 487GB free.

Quit all other programs and open Disk Utility
Select your "MacintoshHD" drive on the left and indented and click Erase > Erase Free Space > Zero and let it complete.
Also run First Aid > Repair Disk and permisisons.
If Repair disk gives a error, you have a bigger problem, if repair permisisons fixes and completes, even if it fixes the same thing twice if you click it again, it's ok. Apple just changed things.
You should be able to download the file sucessfully this time, if not, take it to another location with better/faster internet.
If not then run through this list
Step by Step to fix your Mac

My iPod nano 6 stops after 2 minutes playtime

My iPod nano 6 stops after 2 minutes playtime

Contact Apple Support or visit Genius Bar to have your ipod checked.

Screensaver stops after 2 minutes in 6110 Navigato...

Hi,
I've got a 6110 Navigator 3rd edition symbian and the screensaver stops after 2 minutes, the screen wents totaly black.
I want to have the sreensaver always on and running in order to see the clock and informations about missed calls and sms.
Is there anyone who knows the solution for this issue?
Thank you in advance.
Best regards,
Nuno Batista
Nuno Batista

I believe it's designed this way to save battery power. keeping it on all the time will drain the battery life horribly.
What I do is not to use the screen saver at all and set the phone to "lock keypad" on closing sliding it close. Then when I need to check the time, just press the dial key (green) and the time will display for a short time before fade away.
Hope it helps.
/alan

Hi , I just bought robert kiyosaki financial iq audiobook from ITunes but the sound stop after 5 minutes playing. Can someone assist me please?

Hi , I just bought robert kiyosaki financial iq audiobook from ITunes from my iPad but the sound stop after 5 minutes playing. Can someone assist me please?

Have you tried copying it to your computer's iTunes via File > Transfer Purchases and seeing if it plays ok on your computer ? If it does then try deleting it from your iPad and then sync it back and see if it then plays. If not then you could use the 'report a problem' link from your purchase history : http://support.apple.com/kb/HT1933

Import stops after a few seconds

I just bought a Canon Elura 80 a few months ago, and have just taped an hour of incredibly sweet baby stuff from our newborn onto a used tape (oh boy, I hope it's not the tape...) anyway, I had no trouble the first time importing using iMovie HD from an unused tape. This time, however, the tape stopped after a few minutes, even though the footage did not. I rewound, rebooted, restarted everything, and no matter what, the computer keeps stopping the tape after a few seconds.
I'm not an experienced user by any means. Any chance there is some kind of setting or memory problem?.... It seems to want to import this clip into the pre-existing file, which is fine, since that's also baby stuff, but maybe there's a limit on how much can go in one file?... please help!

Ok, I tried changing the settings to import as individual clips to OFF. What I did was to go into iMovie HD preferences and clicked of the button for "start a new clip with each scene break." This did not help.
I am not sure how to change the mode of recording, but with the tape rewound all the way it only gives me 61 minutes of time, so I think that is ok.
I don't know what the file vault program is, or how to turn it off.
I don't have an external HD, and my camera is connected directly to my computer through a firewire, so that should be ok.
The most frustrating thing about this is that when I play it on the camera, it plays just fine, it's just that on import the computer seems to stop the camera.
More suggestions?

Disp+Work.exe stop after 1 minute

Hi Experts,
                  I am doing the DR setup for production server. Created standby database successfully. Then I shutdown primary database and activate the secodry database to primary database adn chage the profile configration and start the SAP instance, Desp+work.exe down after 1 minute and ABAP WP table is giving error.
Attached the erroe below
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        MVQ
systemid   561 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    159
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        5520
Mon Feb 21 14:14:56 2011
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5520) [dpxxdisp.c   1254]
     shared lib "dw_xml.dll" version 159 successfully loaded
     shared lib "dw_xtc.dll" version 159 successfully loaded
     shared lib "dw_stl.dll" version 159 successfully loaded
     shared lib "dw_gui.dll" version 159 successfully loaded
     shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 21 14:15:01 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >DRSERVER_MVQ_00                         <
DpShMCreate: sizeof(wp_adm)          21008     (1616)
DpShMCreate: sizeof(tm_adm)          5912624     (29416)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000019050050, size: 6604928)
DpShMCreate: allocated sys_adm at 0000000019050050
DpShMCreate: allocated wp_adm at 0000000019052150
DpShMCreate: allocated tm_adm_list at 0000000019057360
DpShMCreate: allocated tm_adm at 00000000190573C0
DpShMCreate: allocated wp_ca_adm at 00000000195FABF0
DpShMCreate: allocated appc_ca_adm at 00000000196009B0
DpShMCreate: allocated comm_adm at 00000000196028F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000019689580
DpShMCreate: allocated gw_adm at 0000000019689600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000019689630
DpShMCreate: allocated wall_adm at 0000000019689640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1656]
***LOG Q0K=> DpMsAttach, mscon ( DRSERVER) [dpxxdisp.c   11937]
DpStartStopMsg: send start message (myname is >DRSERVER_MVQ_00                         <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Mon Feb 21 14:15:41 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1565
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 21 14:15:51 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Feb 21 14:16:09 2011
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12283]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1472 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1472 (pos=2)
SiSelNRemove: removed sock 1472
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1472
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5520) [dpxxdisp.c   10484]
Good Bye .....
Please help me to solve this issue
Thanks in Advance
Jose H.

Hi Dinter,
Please find the log below..
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        MVQ
systemid   561 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    159
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        2080
Mon Feb 21 15:28:59 2011
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2080) [dpxxdisp.c   1254]
     shared lib "dw_xml.dll" version 159 successfully loaded
     shared lib "dw_xtc.dll" version 159 successfully loaded
     shared lib "dw_stl.dll" version 159 successfully loaded
     shared lib "dw_gui.dll" version 159 successfully loaded
     shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 21 15:29:05 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >DRSERVER_MVQ_00                         <
DpShMCreate: sizeof(wp_adm)          21008     (1616)
DpShMCreate: sizeof(tm_adm)          5912624     (29416)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000019050050, size: 6604928)
DpShMCreate: allocated sys_adm at 0000000019050050
DpShMCreate: allocated wp_adm at 0000000019052150
DpShMCreate: allocated tm_adm_list at 0000000019057360
DpShMCreate: allocated tm_adm at 00000000190573C0
DpShMCreate: allocated wp_ca_adm at 00000000195FABF0
DpShMCreate: allocated appc_ca_adm at 00000000196009B0
DpShMCreate: allocated comm_adm at 00000000196028F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000019689580
DpShMCreate: allocated gw_adm at 0000000019689600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000019689630
DpShMCreate: allocated wall_adm at 0000000019689640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Mon Feb 21 15:29:06 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1656]
***LOG Q0K=> DpMsAttach, mscon ( DRSERVER) [dpxxdisp.c   11937]
DpStartStopMsg: send start message (myname is >DRSERVER_MVQ_00                         <)
DpStartStopMsg: start msg sent
Mon Feb 21 15:29:07 2011
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Mon Feb 21 15:29:46 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 21 15:29:56 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Mon Feb 21 09:59:56 2011
========================
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Feb 21 15:30:14 2011
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12283]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1476 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1476 (pos=2)
SiSelNRemove: removed sock 1476
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1476
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
Mon Feb 21 15:30:15 2011
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2080) [dpxxdisp.c   10484]
Good Bye .....
Regards
Jose H.

Premier Pro CC stops after 1 minute during playback.

I have beeen editing a movie shot on a Canon 5D Mark II for the past couple months. Everything has been great.... but today CC stops during playback after 1 minute. It doesn't matter where in the 30 minute timeline I click. The footage I have reviewed a million times now suddenly stops. Hitting the play button or space bar does nothing. I have restarted the program 5 times and it keeps doing this.
First time it has every done this. Please help.

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

TV Out stops after 1 minute of playback

I have a Nano 4g and have problems with the TV out function. I can get the TV out to work with the 30pin video component cable, but after 1 minute of playback the Nano shuts down and the video stops. When I go in to restart the video the video out toggle is reset to off.
Even getting the video playback to start up requires toggling the video out switch through off, on, ask and trying different button combination of play and the center button to successfully get video through the external screen.
Has anyone else experienced this and found a solution?

I have a Nano 4th Gen 16 gb
Facing exactly the same problem... it is such a let down if we are unable to use the features promised by the company...
Any suggestions please !?!

IMacG4: DVD shows on desktop, but installation stops after a minute

With my iMac G4 (1.2 ghz + 1 gig dram), the Leopard DVD shows on the desktop. Go thru the install process, selecting "Erase and Install" on an external drive ... stops after about a minute or two with "Cannot install on this disk .. cannot validate(???) some files".
I've poured over this Discussion Board and have seen several other identical instances. I also have a DVD with no mfg or date stamp on either its inner or outer rings; further, the Apple logo is completely transparent.
I called Apple Tech Support, got bumped up to Level 2 Tech Support where I was told that I have not scientifically demonstrated that it is not my third-party (LaCie) firewire drive. That is mathematically true; however, with the volume of similar issues reported on this Forum, I reject this hypothesis as reasonable.
To continue, I called Sales and found a very nice gentleman with whom I shared every detail of my history, including the comments by Level 2 Tech Support. The sales person agreed to send me a replacement Leopard disk which I am expecting later today. Further, I intend to return my existing Leopard disk via snail mail.

To continue ...
I have also scoured macfixit.com and noted their detailed procedures to first clone the Leopard disk to one partition of an external drive, select this partition as the start-up drive, anf finally reboot the Mac and follow the instructions on "Erase and Install" on another partition or another external drive.
If the second Leopard disk fails, then I intend to meticulously follow the above cloning procedure.
Just one more thing, and this goes back to my frustrating experience in installing the then-brand new iWork 08. I proved beyond any scientific doubt that this installer demanded that there be no remnants of previous versions of iPages or Keynote anywhere. So I trashed these remnants and the subsequent installation was successful.
I am curious if this unreasonable requirement pertains to any of the individual installs that are part of the overall Leopard installation procedure??

I have been using iphoto 09 and am now unable to import photos from my camera. I get the message that they are being imported but after 10 minutes nothing has actually been imported.

I have just been trying to import photos from mine and my husbands cameras but nothing seems to be happening. I get the message to wait while they are being imported but after 10-15 minutes, nothing has been uploaded. I have always had updates downloaded when they become available and can't think what I may have done wrong.
I hope someone out there can give me some advice. My mac is running Snow Leopard and I love it.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Sounds stops after few minutes of play time.

I was wondering if anyone had this problem with I-Pod 60G. Video starts playing normaly, then after few minutes it freezes, but then starts again, but this time with no sound. I have to stop and start it again, just to get the same result.
What's up with that?

hiya!
check the ipod software version on your video:
iPod: How to find software version
if it says version 1.1 see:
Video created with third-party software plays incorrectly on iPod
love, b

Import stops after a minute or so.

Similar Messages

Maybe you are looking for