Import Stops at XPRA_EXECUTION

Hi All,
Currently we are on stack14 and moving stack19 on ECC 5.0. While importing it is stopping at phase XPRA_EXECUTION. Can someone throe light on this error ? Thanks.
Regards,
Priyank.

Hi,
I solved this problem after implementing
Note 1083886 - Method IF_FDT_EXPRESSION~IS_GENERATING is not implemented.
is thsi dosent work try restarting the queue again.
Kind regards,
Vamsi

Similar Messages

SAPKB70013 stopped at XPRA_EXECUTION

Hi All,
While importing Support Packages for NW 2004s, Basis component , Patch : SAPKB70013,
SPAM Phase stopped at XPRA_EXECUTION,
Reason for error : TP_STEP_FAILURE,
Return Code : 0012
Error Message : OCS package SAPKB70013 ,tp step R, return code 0012.
Before this error occurred, SPAM prompted for SPDD adjustment, i called up SPDD and checked in the system , all the elements under With Modification Adjustment are green tick in front of the object.
I returned back and choose Confirm Adjustment and continued with patching and strucked at XPRA_EXECUTION.
i have checked ST22, has short dump with SYNTAX_ERROR.
Runtime Errors SYNTAX_ERROR
Short text
Syntax error in program "SAPLSXMBCONF ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_XMS_PERSIST_ADM============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLSXMBCONF " in include
"LSXMBCONFU20 " in
line 658:
"The field "CO_PARAM_TABLE_SWITCH" is unknown, but there is a field wit"
"h the similar name "CO_PARAM_ACL_CHECK". "CO_PARAM_ACL_CHECK"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_XMS_PERSIST_ADM============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLSXMBCONF ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program SAPLSXMBCONF :
"The field "CO_PARAM_TABLE_SWITCH" is unknown, but there is a field wit"
"h the similar name "CO_PARAM_ACL_CHECK". "CO_PARAM_ACL_CHECK"."
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Transactions ID..... "48891376E27F63AEE100000095C38BAA"
Program............. "CL_XMS_PERSIST_ADM============CP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "CL_XMS_PERSIST_ADM============CP" -
in "CLASS_CONSTRUCTOR".
The main program was "RSAL_BATCH_TOOL_DISPATCHING ".
In the source code you have the termination point in line 39
of the (Include) program "CL_XMS_PERSIST_ADM============CM008".
The program "CL_XMS_PERSIST_ADM============CP" was started as a background job.
Job Name....... "SAP_CCMS_MONI_BATCH_DP"
Job Initiator.. "DDIC"
Job Number..... "1630420C"
Any help is appreciated.
Naren.

Hi,
I solved this problem after implementing
Note 1083886 - Method IF_FDT_EXPRESSION~IS_GENERATING is not implemented.
is thsi dosent work try restarting the queue again.
Kind regards,
Vamsi

XML import - stopped due to "critical error"

Hi all. For the moment, I'm still working with FCS1/FCP 5.1.4, OS 10.4.11.
In the past, when I've needed to open a project I've started on other machines running 6.0.x, I've done an XML export, and imported said xml file into a new project on my machine. If I recall correctly, XML type 2 worked just fine.
Well, it doesn't work now, and I'm wondering why?
The machine I'm exporting from is running OS10.4.11, and FCP 6.0.3. I've exported the project out of there in all flavors of xml (1,2,3 and 4), with and without clip metadata. And I get nothing on import, bupkus, nada, zilch and zero...except for the oh-so-helpful message "XML import stopped due to critical error"
So who broke this?

I've had this happen to me when the original project contained sequences that used filters not supported by 5.1.4.
My solution was to strip out suspect filters until it worked.
Best,
Tom

TMS import stops working

Hi Gurus
We have been importing transports into qas client 200 without any problems, we then created client 300 in qas and when we tried to import the transports that were already in the queue, the import started hanging, i checked the logs and saw that the RDDIMPPDP job had been stopped unexpectedly and i restarted the job and i was able to import into 300. The following day i tried to import the remaining transports but it was no longer importing, there is nothing in the. There are no entries in the import History, and the import monitor is just showing that the import is running. Can anyone help me out, what might be causing this???

Hie Rishi Abrol
Thanks for your prompt response, The Logical system is defined for client 300.
I didnt understand when you said i should include the client 300configuratio and add the client 300 in the group, how do i do that?
Configuration was done on DEV in client 100, and we were using clint 200 in QAS to test now we have creted a client 300 for training purposes but now import stopped functioning, i canolonger transport even to 200, so is it possible so is it possible to copy using scc1 from client 200 when there was no configuration done there, if possible pliz help me how to go about it, thanks in advance

IPhoto import stops

When I try to import 226 pics from Casio EX-Z500, the import stops, uncompleted with 152 left.

Can you download the lot to a folder on the desktop using Image Capture?

Import stops

I am trying to import a full DV tape. I don't want to break it into clips; i just want the whole tape stored. The import keeps stoping at various times. I am not low on HD space. One thing that seems to stop it is when the video was stopped and starts again. Other times I just see that the capture has stopped but the video is still running. I set the capture to not break the capture into scenes, thinking that this would make it less sensitive, but no help.
Thanks

The import stops just short of 8 SECONDS every time.
Turn off FileVault:
http://docs.info.apple.com/article.html?artnum=93460
If that didn't help, try everything here:
http://danslagle.dvmix.com/mac/OSX/panther.shtml
and here:
http://danslagle.dvmix.com/mac/iMovie/iMovie3FixesIssues.shtml
http://danslagle.dvmix.com/mac/iMovie/iMovie4FixesIssues.shtml
http://danslagle.dvmix.com/mac/iMovie/iMovie5FixesIssues.shtml

Import stops part way thru

trying to import from my canon zr85 camcorder, and when I hit import, the preview creen on computer is runing in slow motion, AND the import stops a few minuets into the import. Have started over & over & it stops at random points on the tape.
Last week I sucessfully imported 10 hours of tape (from another camera). I am using firewire connection. Any thoughts, am I missing something?
Mike

I'm getting similar behavior using my Canon Elura 90. iMovie allows the tape to play all the way to the end, but at seemingly random points it just stops importing what is playing. One thing that I have noticed is that if +anything at all+ (screensaver, iCal alarm, etc) comes up on the screen in front of iMovie, the import will always quit at that point. But it also seems to quit at random points even if nothing comes up. It's already taken me several hours to import my 1-hour Christmas tape, and I'm not half done yet, because I've got better things to do on Christmas day than sit and babysit the import. (I can't do anything else on the computer meanwhile because that will of course stop the import.)

Error while running User Profile Import - Stopped-extension-dll-load

Hi guys,
I'm receiving below error message in event viewer while running user profile import for the first time with event ID 6166:
The management agent "MOSS-" failed on run profile "MOSS_EXPORT_". The run step stopped because a configured extension for this management agent could not be loaded.
User Action
Verify that the extension is located in the Extensions directory. If the extension is present, confirm that the version of the .NET framework that can run the extension is installed on the server and that a supportedRuntimes entry in the configuration
files specifies that version. The synchronization engine will not be able to load an extension that is built with a newer version of the .NET framework than the version of the .NET runtime it is hosting.
At the same time , in miisclient "stopped-extension-dll-load" message for MOSS_EXPORT,MOSS_FULLSYNC, MOSS_DELTASYNC. Can any help to let me understand what will be causing this issue?
Farm version: 14.0.6137.5000

Hi Sarath,
For this issue, I recommend verify the things below:
Check if the connection name of the Synchronization Connections created in User Profile Service Application has more than 55 characters. If yes, please rename the connection with less than or equal to 55 characters.
Check if the length of the full path to the dll called “Microsoft.Office.Server.UserProfiles.ManagementAgent” is
greater than 160. If yes, then we can move the extension Microsoft.Office.Server.UserProfiles.ManagementAgent.dll to the folder c:\windows\assembly\GAC_MSIL and then do an IISRESET.
If above cannot work, please check ULS log for more detailed error message.
Best regards,
Victoria Xia
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

New macbook, iPhoto import stopping

i have a new macbook pro, just got it yesterday and there is nothing on it yet. Every time i plug my iPhone into it to import the photos, it imports everything until about halfway and then it stops. and it just stays on that one picture. I've forced closed the app and relaunched it to try again many times but it keeps doing the same thing. how do i get it to actually finish the import????

If you're legally entitled, the App Store will offer the latest update and install it for free. In Lion and Mountain Lion, you need iLife '11 as the previous versions are incompatible. The update does not affect the all important iPhoto library containing your graphic treasures. Latest iPhoto '11 version is 9.3.2 (670.63). In case of hiccups, see here (heed all warnings to the letter): http://support.apple.com/kb/HT2638

VHS import stops/starts

I am converting my old VHS tapes to iMovie via my Canon mini DV camera. Some of these tapes are over 10 years old and are full of stopping and starting. In iMovie, I have turned OFF the "Start new clip at scene break" to try to import the entire tape as big clips.
As it is importing, it goes for about 45 seconds and then can't read the tape and stops the clip. Sometimes it will start to play again but it loses the 5-10 seconds that it was searching for the tape. I am not copying the VHS on to the mini DV, just using the camera as a converter.
The tape heads are clean and continues to play on the screen on the camera. I have tried different cables, but can't keep a solid stream into the computer.
Any suggestions on how to get the tape to play all the way to the end as one continuous clip (or smaller clips that are broken up by iMovie automatically)?
Thanks!
MacBook Pro 17" Mac OS X (10.4.8)
MacBook Pro 17" Mac OS X (10.4.8)
Mac OS X (10.4.8)

Hia there!
If your tapes have been stored invertical, they may very well have stiffend as ovals same as with tires stored standing up!
No longer round and therefore not winding through at same speed, this manifests itself on tv as streaky snow and loss of sound and pict.
(This is why we trow away old tapes, some of my tv tapes are 8 years old and in weekly use but quality is dvindling! Gonna get a harddiscrecorder soon)
Use a old vcr and try speedwinding back and forth afew times that may help?
if not you need proffesional help from a company
There could also be a connection prob and the "gurus" here may answer that?
Go with tiger! Ivar. . .

DV import stops at PAUSE

when i import to imoviehd from my dv cam, it stops importing at every pause on the tape.
i then have to click import again.
how can i get it to import all?????

Hi
iMovie handles drop-outs fairly nice but there are some troublesome situations.
• If You recorded in LP-mode (90min to a 60min tape) and playback this on another Camera
You will surely get troubles.
• Record in SP-mode and use same Camera to import into iMovie
• Go to iMovie prefs and de-select "Import as individual clips". You get one big clip but it might
play smoother.
alternative is tedious but in some cases ONLY way.
You need two Cameras
one 4-pin to 4-pin FW-cable
one new tape
• Record the new tape from start to end with just anything eg. a wall - this to get a solid timecode
• Re-wind and now make a Camera to Camera copy of Your original tape. LOCK the ORIGINAL tape not to
get it accidentally erased ! !
• Now try to import the new tape
Cheque settings on both Cameras as SP-mode AND 16-bit sound (12-bit really problematic)
Yours Bengt W

Importing stops at every glitch in tape when using the ADVC300 to imprt vhs

When I import a analog video from VHS or an 8mm with the ADVC300 iMovie stops the import at every glitch in the tape, I am looking for a way to import an entire VHS from beginning to end. Is the a preference setting in iMovie 09 that I can change? Or maybe Final Cut Express?

I have exactly the same problem. I'm importing old VHS which has a lot of bad spots. I have the ADVC300 - default settings.
iMovie seems to be coded to stop importing whenever it sees a break in the tape. I guess for digital media that's a good assumption - but for ratty VHS it's a real problem.
iMovie does better than Quicktime 7 Pro - but neither work very well for this kind of import.
Any suggestions would be appreciated - if I find a solution in the meantime - I'll post it here.

Import stops after a minute or so.

I am trying to import video from my TV but iMovie stops importing after a minute or two. I am using a converter box (Miglia Director's Cut) and have a DVR (Digital Video Recorder) as my source.
I have the video and audio cables out from the DVR going into the Miglia box. This is connected to my Mac Pro via firewire. When I open iMovie, it tells me a camera is connected. When I click Import, I begin to see the TV show that is playing on my TV/DVR. All is well for about a minute, then iMovie just stops importing. The time varies. Sometimes I get a one minute and 40 seconds clip, other times I get less than a minute. I can't figure out why it does this. Any help??
Or.. are there any other video capture applications I might use besides iMovie?
Thanks for any advice.
nÔÔdle--hëad Per-rrr-plexed

This is a me too message. I suspect it is a Dolby digital problem. The picture has been rock solid so far. I'm using Youview.
I have a followup and a workaround to this problem
I contacted BT and they are convinced that the problem is due to the powerline adaptor, which was supplied by BT along with the Youview box. They tell me that their technical help files state there is not enough bandwith available. They are going to send me, free of charge, a 10 metre ethernet cable for a direct connection to the router. I was very sceptical when I was told this over the phone and my subsequent action below confirms my scepticism.
After the call, I tried the following setting change on the Youview box. I went to settings>tv signal & quality>HDMI Audio format and changed this from surround to stereo. This effectively turns off the dolby digital output. The problem disappears! Of course, this turns off dolby output for all HD channels on the box which is not desirable.
This makes me convinced it is a dolby audio problem but getting BT to recognise this might be more difficult. I hope they can fix the problem soon.

Import stops after a few seconds

I just bought a Canon Elura 80 a few months ago, and have just taped an hour of incredibly sweet baby stuff from our newborn onto a used tape (oh boy, I hope it's not the tape...) anyway, I had no trouble the first time importing using iMovie HD from an unused tape. This time, however, the tape stopped after a few minutes, even though the footage did not. I rewound, rebooted, restarted everything, and no matter what, the computer keeps stopping the tape after a few seconds.
I'm not an experienced user by any means. Any chance there is some kind of setting or memory problem?.... It seems to want to import this clip into the pre-existing file, which is fine, since that's also baby stuff, but maybe there's a limit on how much can go in one file?... please help!

Ok, I tried changing the settings to import as individual clips to OFF. What I did was to go into iMovie HD preferences and clicked of the button for "start a new clip with each scene break." This did not help.
I am not sure how to change the mode of recording, but with the tape rewound all the way it only gives me 61 minutes of time, so I think that is ok.
I don't know what the file vault program is, or how to turn it off.
I don't have an external HD, and my camera is connected directly to my computer through a firewire, so that should be ok.
The most frustrating thing about this is that when I play it on the camera, it plays just fine, it's just that on import the computer seems to stop the camera.
More suggestions?

Importing stops, requires closing problem. (Captivate 4)

When restarting, still can't import, paste, or insert slides. Don't know if it matters, but seems that file size is less of an issue than file creation date. So far, it looks like old files work fine, but today's files crash (file sizes 1,700K - 80,000K). I appreciate your help!
Error message receiving: (pop-up appears while "Importing" window working) - "Adobe Captivate: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solutin is available." Only option is to click on the "Close Program" button.
I am opening the program as Administrator.

Since noticing this problem, have you also noticed that your file sizes were getting much larger than those of other projects? That was the problem I encountered. A project that was once 10,000 KB was suddenly saving as 84,000 KB.
To get around it, I took a suggestion from Rick (Captiv8r) in the Editing Forum: open a second instance of Captivate, create new blank project with the same dimensions as the original, copy the slides in the original, and paste them into the new blank project. I did need to reset the button actions in the new file, but it was a small price to pay for avoiding having to recreate a project. (Note: Importing did not work, I had to copy & paste.)
When I tried to import into this new smaller file from an older, bloated file, I still had the import error; however, if I did the copy/paste method to create a new file for the one I was pulling from (during import), it worked fine. I've only tried this on projects up to 67 slides so far, but most of my work is in no larger than that, so I'm cautiously optimistic.
I'm still interested in why this problem appeared so suddenly, but this workaround seems to allow me to finish today's projects on time.
Good luck!
-A.

Import Stops at XPRA_EXECUTION

Similar Messages

Maybe you are looking for