Import stops with 'Transport set created, exported, and submitted...'

Hi,
I'm using Oracle Portal 10.1.4, and I've successfully imported page groups into this portal before, but now when I try to do an import, I only see the following message in the 'Browse Transport Sets' page:
Import: Transport set created, exported, and submitted to background process for import.
This is true for new page groups and for page groups that should be replaced. Any ideas?
What is the background process? How do I get it started, if it has failed? How can I remove the transport set that is in this 'Import' status. Any help appreciated.
Thanks,
J.

Hi J,
For me if this is happening is cause problably something hang on your side while doing the Portal Export / Import. Not sure how it happened but I've seen this happening for other persons. The easiest way is to clean up the Portal Transport Set tables. Upload the DMP to the Portal again and attempt to merge it again.
There is an out dated Note in the Metalink for this, but I'd basically submit a Service Request as Oracle Support may better help you on this matter and eventually update the old Note -- Note:177597.1 - How to clean up the Oracle Portal Transport Tables.
I hope it helps...
Cheers,
Pedro.

Similar Messages

  • When I try to open I Movie the screen appears with the message creating thumbnails and all my projects have disappeared. Then everything freezes and I have to force close my Macbook Pro

    When I try to open I Movie thes screen appears with the message "creating thumbnails" and then freezes. None of my events or projects appear in the libraries. I cannot close I Movie or my computer and have to force shut down my Macbook. This is a sudden occurence.

    You can never, never transfer an installed copy of PSE. It's just too complex and it strews stuff all over your hard drive in places the migration assistant is not programmed to look. Now you will need to download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    after which you can go around and manually remove all the bits from Applications, the library at the top level of your hard drive>application support>adobe, and your username>library>preferences. Spotlight will not help with this; it's programmed to skip these kinds of files.
    Then you can reinstall from scratch. Let us know if you need help finding the library folders.

  • Export Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export Quicktime movie?

    Export>Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export>Quicktime movie?

    When you converted the original files via MPEG Streamclip, what did you convert them to?
    Have you tried trashing your preferences in FCP? Trashing FCP prefs is usually the first step when FCP is performing strangely.
    Download Preference Manager from Digital Rebellion (free) at:
    http://www.digitalrebellion.com/prefman/
    It will allow you to archive your current preferences if you wish to restore them later.
    MtD

  • Having a hard time with permissions to create dir and files in www

    Having a hard time getting permissions to create directories and files in www folder:
    I followed the following guide here: https://www.digitalocean.com/community/ … arch-linux and here: https://www.digitalocean.com/community/ … arch-linux
    So now I have a LEMP stack which runs fine and I have my root account secured and a new username "adriano". If I SFTP into the server using the username adriano, I am unable to create any files or directories. Trying to do a simple wordpress install doesn't work because I need to be able to create a folder for it, and a wp-config.php file. Both of which, like I mentioned, I do not have permissions to do. Yes, the username "adriano" has been added to the sudoers file via visudo.
    I've never been very good at UNIX permissions so I was wondering if maybe someone can help me out?
    Also, since I am using nginx it does not seem like I have a www-data group or user and my www folder is /usr/share/nginx/
    Thank you,
    AJ

    No, no, you guys misunderstand me. I am not that much of an oblivious person. 95% of the time I understand EXACTLY what the code that I am copying and pasting does. And when I don't, I look into it further before executing said commands. I just tend to not remember commands so I google them, see examples, and then copy and paste them to avoid the busy work of typing out long strings. For example, it took me like 6 months to remember that to untar a .tar.gz file it was -xvfz.
    But I digress. drcouzelis, I do have root access. It's my own VPS. However, I have always used shared hosting through different hosting providers and now that I got a VPS and have to do everything myself, I am a little bit lost.
    I followed what wonderwoofy said and created a www-data group, added the adriano user to said group, and changed the owner of my http server root to www-data, and I SFTPed into the server again with filezilla and it still works perfectly. However, those "hordes of hackers" drcouzelis warned me about does not sound pleasant so I am really really really hoping one of you guys can tell me the next steps. Root login is disabled in the /etc/ssh/sshd_config file, and I also changed the port to a random port I created. My web files are all served from /usr/share/nginx/ (there are different folders in there that correspond to different domains.) Now what I am wondering is that if user "adriano" is in the sudoers file as ALL=(ALL) ALL, doesn't that pretty make adriano the same as the root user? The reason why I am so worried about this is because I heard/read countless times that working through the root user is BADDDDDDDDDD and will bring evil and shame upon your life (not in those exact words) and that you should never work with it. Also, do I have to worry about anything dealing with groups and/or users and/or permissions when it comes to PHP? I have php-fpm installed.
    I am willing to buy anyone who can help me out with this a beer or two and I will be forever in your debt.
    Thank you,
    AJ
    Last edited by AJCR (2013-05-23 02:52:03)

  • Lightroom keeps changing default import location; how to set it once and for all?

    Hi all,
    I'm on a mac, and coming from iPhoto. After migrating to Lightroom, I made is so my photos imports from my camera into "/Pictures/LightroomMasters/year/month/day".Now, suddenly, I noticed that they end up in "/Pictures/year/month/day".
    I really want Lightroom to keep importing everything inside the "Lightroom Masters"-folder, without me clicking to that location everytime I attach my camera. But going through the Preferences, and Catalouge-settings, I can not find the equivalent of "Default import location". Is there such a setting? Or is Lightroom meant to remember where is imported to last, and keep on using that?
    Thanks in advance,
    Andreas

    It seems to remember the folder structure on my system. But I'm running Windows 7. I just tested it by inserting a memory card and importing the images on it, I don't connect cameras to my computer, to my E drive and to a folder named Pictures 2015. I had LR place these images in a sub-folder of that Picture 2015 with the date in the format of 20150201 and which these picture were taken on the 30th of January so the folder was 20150130. I then closed LR and reopened it and took some more shots around the house and then imported those. LR import dialog went right back to that E drive \Pictures 2015 folder and placed those newer images in a folder named 20150201.
    So it remembered which drive and which top level folder it was supposed to. Not sure it it would work with a secondary sub-folder under the Pictures 2015 folder.
    To be honest I rarely use the import from memory card feature of LR. I don't care for the naming conventions it offers. I do use the Adobe Photo Downloader applet that comes with PS Bridge as the naming convention in that creates sub-folders with just the month and day in this format 0201. I don't need the year tacked on to the front of that sub-folder name, although it can do that, as I store all my images by years to begin with. Then I import to LR from those folders the APD app creates.
    If you are using more than one camera it might remember for each camera so from now on it will go back to the right folder.

  • Import dumpfile with seperate tablespaces for table and index

    Hi,
    We have a schema for which the its tables are stored in seperate tablespace and indexes are stored in different tablespace. Now we have take full schema export. Now we want to import it on another schema. Now I want to know if the we have difference in the tablespace name we use REMAP_TABLESPACE clause of the impdp command but what about the seperate tablespace for table and indexes. How would Oracle handle this.
    Regards,
    Abbasi

    Hi,
    I hope you created the same tablespace structure on the target side if not so remap_tablespace option you have to use for specifying different tablespaces.Oracle will take care of putting data and index.Any how if a index is moved from one tablespace to other you have to rebuild them,once you rebuild them than only stattistics are gathered otherwise you
    might face some performance issue.
    Better option is to keep same tablespace structures in source and target environment.
    Best regards,
    Rafi.
    http://rafioracledba.blogspot.com
    Edited by: Rafi (Oracle DBA) on May 9, 2011 7:07 AM

  • Sorting with layout set for NewsBrowser and custom made properties

    Hi
    I have developed some custom made properties that is used for each document based on XML Form. But how can I obtain a custom sorting order based on my properties.
    After created a document I define some properties for company, department and process. And using the layout set for NewsBrowser I will have my documents sorted due to my processes. Lets say that I have set the properties for the process for some documents, e.g. SA1010, SA1010-1, SA1010-1a, how to obtain this sorting order in a KM-Navigation-iView using layout set for NewsBrowser?
    Regards
    Kay-Arne
    Message was edited by: Kay-Arne S.  Aarlie

    Hi Kay-Arne,
    A namespace defines a system area in which a property (defined by a property ID) is allowed to exist only once. So for your own predefined properties you should use an own namespace in order to be able to use a Property ID that is already available in another namespace. Check this link for more info:
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/9a4a3b80f2ec40aa7456bc87a94259/frameset.htm
    In the Property Definition you later use the Namespace Alias. This alias (with ":PropertyID") you would also use in the LayoutSet Parameter mentioned above.
    Hope this clarify things ,
    Robert

  • Folder with odd set of numbers and letters appear in external hard drive?

    A file folder keeps appearig in the same sub-folder after deleting it. Whenever i delete it another folder is generated but with a different name.
    the folder is empty - o bytes, i can access it but there is no date created other than a time stamp. this is only on my external hard drive, no where else.
    the name is something like: iJfweF9RL8p8O
    then it might be replaced with another name, similar. sometimes the name has symbols. it seems random.
    it has stopped doing it for a bit, but i fear it will return. i just cant seem to find out what it is. i dont see how it could be a virus. scan said it was clear.

    I can't tell you which programs put them there. But those folders are usually for holding temporary files during installations or updates. They can be deleted without worry.
    If they occur in the Windows folder of your internal drive, though, I wouldn't mess with them.
    -Jerry

  • Can the trial version with everything installed create mysites and other applications?

    Hello Community
        IF you have WS2012 and you install Sharepoint 2013 Server
    Stand-Alone used for trial environments and it installs all components
    can you create  Yammer, MySites, User Profiles,  etc?
        Thank you
        Shabeaut

    Yes, trial version comes with full functionality.
    Thanks
    Mohit

  • Help with Logic Set Up - Loops and samples

    Hi all
    I am a new Logic user so apologies if this question is very newbie...
    I am just installing and setting up my program. I installed the full Logic with all the included sample content on my boot drive. Subsequently I bought a drive that I want to be a dedicated drive for sample libraries.
    My question is, how do I locate all the sample content and Apple Jam Pack content that Logic has already installed in order to move it to the new drive, and how do I make Logic aware of the new location of the libraries?
    If it weren't an eight hour install, I might just run the installer again, but hoping there would be an easier way.
    Thanks!!
    Message was edited by: V Silly

    There is no need to uncheck remote and testing. Previewing locally should work exactly the same as it did in CS3.
    Are you using a server-side language? If so, expand the Files panel by clicking this icon:
    Then make sure that the Testing Server icon is selected.

  • Issue Importing CDs with OS 10.5.4 and iTunes 7.7 update

    This is just a minor issue I have noticed since updating. I was wondering if anybody else can reproduce this. Here's whats happening...
    When I put a store-bought audio CD in, and iTunes recognizes it, a message pops up saying "Would you like to import the CD 'XXX' into your iTunes library?"
    If I click yes, the CD seems to disappear out of iTunes and off the desktop. I hit eject on my keyboard and it comes out though. If I click no to this message, then I can click the import CD button at the bottom right of iTunes, and everything works as it should.
    Like I said, its a minor issue, but maybe its an easy fix too.

    This issue has already been reported several times in these forums over the past 6-8 months. Various OSX updates, iTunes updates, workarounds, have not fixed the problem as of yet. Personally, I have not imported anything since updating to 7.7, but have my fingers crossed. See the following link for a detailed discussion.
    http://discussions.apple.com/thread.jspa?threadID=1279473&start=0&tstart=0

  • I can't update my ipad2 to ios5. After 2 hours and what looks like download complete and the start of processing, it stops with message check network settings and connections. Any ideas?

    I can't update my ipad2 to ios5. After 2 hours of what looks like a successful download and processing is about to begin, I lose connection and get message network timed out check network settings and connection, but I am still connected via wifi. Any ideas?

    If you are using windows...
    Try temporarily disabling your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • Portal Export and Import Steps

    Hi all,
    I need to export all page groups from Production portal instance and import those in brand new portal instance (target Portal)*. Source and target portal instance is as follows
    Production Oracle Database Version: 10.1.0.5
    Target Oracle Database Version: 10.2.0.4
    Production Oracle Infrastructure Version : 10.1.2.0.2
    Target Oracle Infrastructure Version: 10.1.2.0.2
    Production Portal Version: 10.1.2.0.2
    Target Portal Version: 10.1.2.0.2
    What i have done till now is as follows
    1. Install Database server 10.2.0.1
    2. Upgrade Database Server to 10.2.0.4
    3. Install 10.2.0.1 products from Companion CD (ultra search Schemas)
    4. Create Metadata Repository using Repository Creation assistance
    5. Install IAS infrastructure (10.1.2.0.2)
    6. Install IAS Middle Tier (10.1.2.02.)
    7. Create Transport sets in production instance
    Please tell me what i am supposed to do now.
    I am following below link for reference but not able to follow all
    http://www.scott-tiger.dk/portalHelp2/ohw/state?navSetId=_&navId=0
    Regards
    Anindya

    For Portal Export Import (transport), the following are the foremost links on Metalink/ My Oracle Support.
    Note 306785.1 Overview of the Portal Export-Import Process
    Note 263995.1 - Master Note for OracleAS Portal Export / Import Issues
    Note 333867.1 Portal Export and Import Utility Supportability Scenarios
    Regarding your question, please do go through all of these notes.
    - Overview will tell you how to prepare your instances/environments for portal transport. you will see how to ensure they are ready, and that some patches are needed.
    - Master note will tell you which patches are needed, how to get them, what are the diagnostic tools which can help you check and clean your portal repositories, and what common errors you may get and how to fix them.
    - Supportability Scenario tells you what actually you can transport and what you cannot. i.e., what is supported and what is not. Do read it for your case.
    I have seen several Portal Admins who keep banging their heads with problems they create in their systems because they do not read this note and try to force a case which does not follow a supportable scenario.
    hope that helps!
    AMN

  • Importing issues with Final Cut Pro X. Green flash and twitches while play back

    Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
    Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
    Here is a screenshot of the green screen that I'm talking about:
    [URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
    Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
    In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
    More information:
    My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
    My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
    I export the video as a quicktime movie. The export setting is H.262.
    The summary of the export is:
    File type: Quicktime movie
    Estimated size: 397GB
    H.264, Width and height: 1280 x 720. Framte rate: 30 fps

    My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
    My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
    I export the video as a quicktime movie. The export setting is H.262.
    The summary of the export is:
    File type: Quicktime movie
    Estimated size: 397GB
    H.264, Width and height: 1280 x 720. Framte rate: 30 fps

  • Export and import parameter

    Hello friends,
    DB: oracle 10 G
    O/S: Sun soalris 10.
    I have two sun system system both are having oracle 10 g
    1 is prod database and another is test database
    both the systems having same schema ,I want to make my test database upto date with production database before i used to use the complete export of prod database 1 schema and simply import it into test database but this process is taking very long time as the export dump file size is alomost 2 GB and while importing at the test database the import process is taking almost 5 to 6 hours ,
    the test database schema having 10 days old old records when compare to production database.
    so I just want to know is there any parameter in IMPORT so that the import process will take only changes information from export dumpfile while importing?
    I am using tradition export and import method

    thanks for your reply,
    But right now I don'thave datapump export dump file and my production database is at remote place ,
    again to take datapump export and copy the dump from netwrok takes again very long time network will also get busy to get 2 gb of file
    right now at my place where test db is located I have only tradition export dump file
    any more sujjestion in that

Maybe you are looking for