Import stuck on isight camera
I have a built in isight camera on my imac. In imovie hd I want to record directly from my firewire camera directly to the mac. The camera is connected, but imove seems to be stuck on the isight camera and won't switch to my firewire connected camera.
Is there a toggle somewhere to take care of this?
flatmartin,
If you click on the little camera icon side of the camera/editing switch you should see a little drop down menu of available cameras.
Also, when you created and first saved your project, did you choose iSight or NTSC as the video format.
Matt
Similar Messages
-
My macbook pro recognizes my sd card on the desktop, but when i go to the imovie importer it goes straight to isight camera. Ive imported via this method before but now i dont know whats going on.
Use iMovie > Help on your Mac or here -> http://support.apple.com/kb/PH2153
Treat the "sd card on the desktop" as a connected hard disk.
Message was edited by: EZ Jim
Mac OSX 10.7.4 -
when I used my iSight Camera on my old G4 iMac I stuck the holder with the adhesive layer on
the back of the iMac screen. How can I get it off - without damaging anything ?Best you use a soft mildly moist cloth to remove it.
Magic American Corporation has a product called "Goo Gone".
You can check there site http://www.googone.com/ for specific advice.
Take care.
Message was edited by: CodLBi -
MacBook White Built-in iSight Camera stuck on after 10.7.3 upgrade but not producing video
I upgraded today the OS of my iMac and MacBook from Lion 10.7.2 to 10.7.3. The iMac is fine but the MacBook is always having the iSight camera on (light is constantly green.) But no video is produced in Skype, FaceTime, and iChat. I rebooted several times with no results. The green light is always on. Any advise to solve this issue is greatly appreciated.
I updated three Macs to 10.7.3 with no trouble. I credit ALWAYS using the Combo Update for my reliable updates:
http://support.apple.com/kb/DL1484
If you have trouble later, try applying the Combo version. Even if you are already using the same version, the Combo may fix your problem.
Use your Mac's Disk Utility to repair permissions before updating and again immediately following the system restart that completes the Combo update.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early09) 2.93Ghz OSX 10.7.3
MBP 15" i7 (Early'11) OSX 10.7.3
13" MBP (Mid'09) 2.26GHz OSX 10.7.3 -
Can't capture video using iSight camera in QuickTime 7.4 (92)
OK, I see that there are plenty of "bugs" with Quicktime Version 7.4 (92), but I don't see the problem I am having, posted anywhere. Here goes...
I cannot capture video using my [Firewire] iSight camera on my CoreDuo MacMini. I definitely used to be able to do this. When I go to File>New Movie Recording, I get a back/blank Movie Recording window and that's it. I click on the Red/Record button and nothing happens. The timer doesn't even advance. Just sits there. When I try to stop the recording, I get the following message:
*"Recording failed because no data was received.*
*Make sure that the media input source is turned on and playing."*
I can still capture audio, although had some problems and had to "downgrade" to version 7.3.x and subsequently reinstalled 7.4. Now the audio works but still no video.
A few things:
1. YES, the iSight camera works - I can use it in iMovie, iChat, Photobooth, etc. - for both video and audio.
2. As I mentioned, I tried "downgrading" (using "Pacifist") but still no video.
3. I re-installed Version 7.4 and the audio problems cleared up, but again, still unable to capture video.
3. All software updates installed.
Any ideas???
Thanks!"As I mentioned, I tried "downgrading" (using "Pacifist") but still no video."
See QuickTimeKirk’s posting in the following thread:
http://discussions.apple.com/thread.jspa?threadID=1357579&tstart=0
Try the following:
Trash com.apple.LaunchServices.plist
It's located in your account:
HD/Library/Preferences/com.apple.LaunchServices.plist
Delete the file, restart (a new .plist will be created) and quicktime hopefully will work again w/o doing an Archive & Install.
+If you want to do an A&I:+
Do an archive and install of your OS from the OS disc. Stop at the QT upgrade you need.
http://docs.info.apple.com/article.html?artnum=301270 Scroll down to "Archive and Install”
IMPORTANT: Maker sure you select "preserve user preferences and data" when you performed the A&I?
Good luck! -
Kisight: How do I get my iSight working ? Trouble Shooting an iSight Camera. (Version 3)
Replacement for the second draft of this Thread (To be removed if Published as Tip)
kisight: How do I get my iSight working ?
Trouble Shooting an iSight Camera. (Version 3)
Hi, On many subjects Apple has Articles and Documents that can help.
In some case they are written by an Engineer or similar and can miss the mark for the average user.
In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
It lists steps and processes to go through for both Internal iSights and External ones.
However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ? which were written several years ago and predate the Apple Article, being aimed at the External iSight. They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
External First. For Internal iSights Start at 2b) (you will need to adjust some options/steps as the Internal is USB)
Steps
1) Pre Purchase
If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
2) Does it work ?
a) First of all Plug it in. It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
It will then go through some checks as the OS powers it up and checks it's firmware.
Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
There is no ON switch as such. It does have an iris mechanism that can be controlled by the User. The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
See this Users Tip for more applications Or this page for yet more.
Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started. If you see your self or what the camera is pointing at, It Works !!
3) If it does Not Work
a) Check Cables/leads. Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
Try another 6 pin to 6 pin firewire cable.
b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing. (Also see d below if you have an 800 FIreWIre Computer)
c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire. (Use USB for Internal Cameras)
If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point. This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
Other Items
Audio.
The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
Firmware.
The System Profiler as detailed above should tell you the Firmware the iSight has. The current version is 1.0.3 and was updated in Panther. (Essentially it is an Audio compatibility update but does seem to help in other situations)
If your computer is running Panther (10.2.x) then use this Updater
If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
If an iSight is Plugged in on the Computer when you do an OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
Focusing on the External iSight
Essentially the External iSight is self or Autofocusing.
If in doubt then try better lighting and strong colours as opposes to light or pastels.
(All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
EZ Jim has these more specific recommendations for piece of mind.
Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
This Users Tip by Ian Bickerstaff can give you clues for any application really "Look and sound good in iChat"
Other Info and Links
iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
Apple's iSight Firewire Connectivity FAQs
Apple's iSight Service FAQs
If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
1:13 PM Saturday; October 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, SeriouslyReplacement for the second draft of this Thread (To be removed if Published as Tip)
kisight: How do I get my iSight working ?
Trouble Shooting an iSight Camera. (Version 3)
Hi, On many subjects Apple has Articles and Documents that can help.
In some case they are written by an Engineer or similar and can miss the mark for the average user.
In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
It lists steps and processes to go through for both Internal iSights and External ones.
However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ? which were written several years ago and predate the Apple Article, being aimed at the External iSight. They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
External First. For Internal iSights Start at 2b) (you will need to adjust some options/steps as the Internal is USB)
Steps
1) Pre Purchase
If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
2) Does it work ?
a) First of all Plug it in. It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
It will then go through some checks as the OS powers it up and checks it's firmware.
Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
There is no ON switch as such. It does have an iris mechanism that can be controlled by the User. The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
See this Users Tip for more applications Or this page for yet more.
Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started. If you see your self or what the camera is pointing at, It Works !!
3) If it does Not Work
a) Check Cables/leads. Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
Try another 6 pin to 6 pin firewire cable.
b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing. (Also see d below if you have an 800 FIreWIre Computer)
c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire. (Use USB for Internal Cameras)
If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point. This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
Other Items
Audio.
The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
Firmware.
The System Profiler as detailed above should tell you the Firmware the iSight has. The current version is 1.0.3 and was updated in Panther. (Essentially it is an Audio compatibility update but does seem to help in other situations)
If your computer is running Panther (10.2.x) then use this Updater
If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
If an iSight is Plugged in on the Computer when you do an OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
Focusing on the External iSight
Essentially the External iSight is self or Autofocusing.
If in doubt then try better lighting and strong colours as opposes to light or pastels.
(All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
EZ Jim has these more specific recommendations for piece of mind.
Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
This Users Tip by Ian Bickerstaff can give you clues for any application really "Look and sound good in iChat"
Other Info and Links
iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
Apple's iSight Firewire Connectivity FAQs
Apple's iSight Service FAQs
If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
1:13 PM Saturday; October 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
IPhoto worked great; with Photo I can no longer import pictures from my camera. Why?
I never had a single problem importing photos using a USB connection between camera and iMac. Since the new Photos was automatically installed with the latest OS Yosemite update, I no longer can import photos...the screen automatically opens, it shows all the photos on my camera, it allows me to choose which photo(s) I want to import and then I click "Import" and I get a nasty message that my photos to be imported are NOT in the correct format. Well, what the heck format are they supposed to be in? I see nowhere on my camera where I can change a format...
HELP!!!! I need to import photos of my granddaughter's First Communion for my entire family and the photos are stuck on my camera!!Backup cycle - running you normally computer backup - you do have a regular backup going don't you?
Image Capture is an application in your Applications folder exactly as I stated
Try Image capture (in your applications folder) or a card Reader - once the photos are safely on your mac and at least one successful backup cycle has run use the camera's format command to reformat the card
In order to import as before you have to solve the problem that you have
In irder to solve the problem you have to read and follow directiopns
Simply posting crazy comments and not fooling directions will not resolve your problem
LN -
What format do I use for to edit with footage from Isight camera (Mpeg-4)
I've been having trouble with the rendering of clips in the timeline. I'm using 3 video tracks and all of them were recorded on my Isight camera, making all of them mpeg 4 files so when I first imported them, every time I changed one little thing on the timeline, it all had to be rendered again but it took forever. So I went to easy setup and changed the format a few times to see if any would work since I haven't had this problem before but this is the first time I'm using clips from my isight camera. Does anyone know what format to use or do I need to convert the files?
Any help or suggestions would be greatly appreciated!You need to convert the media into a format that's natively editable in FCE. You can use MPEG Streamclip to do that.
-
Can't use LINE IN audio with iSight Camera on iMovie 08
I want to record a video, using the internal iSight camera of my iMac, but I want to use the "line in" audio instead of the internal microphone of my iMac. I have tried for hours, and done the obvious things (selecting "line in" under System Preferences). I can record audio perfectly using Sound Studio or other programs, so it's not like the Mac isn't getting the audio. The problem is convincing iMovie to accept the audio of the Line In rather than the internal microphone of the iSight camera.
Thanks to all who would reply.I've had the same problem, and it seems that this is simply not possible in iMovie... Disappointed!
Instead, having set 'line in' as input under System Preferences, fire up Quicktime Player and choose New Movie Recording under the File menu.
The movie will be recorded using system sound input, i.e. line in. It can then be opened / imported in iMovie for editing et c.
This works for me with the built in iSight on an intel Penryn Macbook Pro.
hth,
/m -
Built-in iSight cam randomly stopped working. All I get is a green screen!
I used it just yesterday with both Photobooth and iChat with no problems what so ever. Now all it shows is a green screen! Anybody know what the problem may be and how to fix it??? Thanks!
-JonathonWelcome to Discussions, -Jonathon
Here are the solutions that help most users who encounter green-screen problems. None are complicated, but the only way to find which one will work for you is to try them one-by-one until you find the one that fixes your Mac.
(1) Check your System Preferences as explained in this kbase article about Built-in iSight camera produces blue or green pictures.
(2) If your System Preferences are set correctly, try every suggestion re: Built-in iSight in the "How to Troubleshoot iSight" article.
Be sure to include the checks for whether the problem is "application-specific" and "user-specific".
If you need help creating a new user account to check whether your problem is "user-specific" during Troubleshooting, see this Help article.
(3) If resetting or the other suggestions do correct your problem, try the following:
• Backup your Home Folder, or at very least, your important files.
• Repair permissions. (Click here if you need help.)
• Then download and apply the Mac OS X 10.4.10 Combo Update v1.1 (iNtel).
• Finish with another Permissions Repair, and then check your iSight again.
Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
(4) A few iNtel Mac laptop users have also reported success after unplugging their Macs and leaving the battery out for half-an-hour to overnight.
(5) If none of these suggestions help, contact Apple or your Apple-Authorized Service Provider for a professional check.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight -
Is there a plan for Apple to continue offering the external iSight camera?
Hi All,
I'm thrilled to be the new owner of a Mac Pro w/Cinema display, but I'm getting jealous of my partner on his MacBook Pro with built-in iSight camera, having all the fun with video iChats and video Skype calls.
Since Apple has discontinued sales of the old external iSight camera, does anyone know if they have any plans for a new (even cooler) version? Or, if not, any recommendations on another product that would work just as well?
Thanks!Hello John and Peter
¶2.1.1 of Apple Discussions' Terms of Use prohibits us from speculating on Apple's plans here. If you want to pursue that question, you can search the web for some of the many Mac or Apple rumor sites.
Some of the many available iSight alternatives are discussed in this link. Because you are using Leopard on your new Mac Pro, all of the alternatives mentioned there are available to you.
At present, the Apple Store sells the Logitech QuickCam Ultra Vision. However, any of the alternatives from the link in the paragraph above will work as long as they are compatible with your system and the applications you plans to use with your camera. The package documentation for many cameras list compatibility info for popular applications. Carefully check the documentation for any apps and cameras of interest before you buy.
Also check the camera's advertised features to be certain your compatible camera has all features that are important to you (examples: auto-focus, auto-exposrure, zoom capablility, integrated microphone, etc..) You may not need many, or even any, of these features, but many low priced Mac compatible cameras omit at least some of the features that you may need.
You will not have any difficulty finding cameras that will work with both iChat and Skype. For specific camera recommendations for iChat, search the iChat and iChat Sharing Forum for threads like this one.
For Skype-specific questions beyond what Webcams that Skype sells for use with their software, see the Skype Help pages.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight -
When using iChat or Photobooth the iSight camera is always reported as "The Camera is in use by another application". This is not true as iChat is the first item I open after a fresh startup.
I have looked far and wide on the Apple support site and via google but to no avail. This problem is really annoying as I Cannot use iChat or any other application with the built-in iSight camera.
I have tried re-installing Quicktime which seems to be a possible solution for some but it does nothing for me. The two Apple support items also fail to do anything for this problem.
Does anyone have any other options to troubleshoot this?Welcome to Apple Discussions,William Munro
Here is the latest list of possible fixes as of this date:
If you have not installed any new hardware since your iMovie worked correctly, it is possible that your problem may be hardware related. However, unless you get better suggestions from iNtel Mac users, here are some common solutions that help most avoid a visit to their Apple Service Technician.
None of the suggestions is complicated, but the only way to find which one will work for you is to try them one-by-one until you find the one that fixes your Mac.
(0) Disconnect any unnecessary peripherals while you do your testing to rule out possible conflicts.
(1) Restart your Mac. Sometimes that is all that is required.
(2) (You have already ruled out this one.) If you use VMware Fusion to run Windows on your Mac, consider disconnecting iSight from your Virtual Machine as recommended above by user "The.VCI" in his post in this thread.
(3) If you use an HP printer/scanner with your Mac, consider the "daemon" suggestions from user "parkersal" in this post.
(4) Check for any running applications, Login Items, or widgets that can use your iSight. (It is easy to forget widgets like Mirror in your Dashboard.) As explained in Apple's iSight "Your camera is in use by another application" message, iSight can be used by one application at a time.
(5) Try every suggestion re: Built-in iSight in How to Troubleshoot iSight. Be sure to include the checks for whether the problem is "application-specific" and "user-specific".
Click here if you need help creating a new user account to check whether your problem is "user-specific" during Troubleshooting.
(6) If resetting or the other troubleshooting suggestions do correct your problem, try the following:
• Backup your Home Folder, or at very least, your important files.
• Repair permissions. (Click here if you need help.)
• Then download and apply the Mac OS X 10.4.10 Combo Update v1.1 (iNtel).
• Finish with another Permissions Repair, and then check your iSight again.
Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
(7) Some iNtel Mac laptop users have also reported success after unplugging their Macs and leaving the battery out for half-an-hour to overnight.
(8) If none of these suggestions help, take your iMac to your Apple-Authorized Service Provider for a professional check.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight -
Two brand new Isight cameras won't work with my computer!@!!= ARGH!!!!!!!!!
The first Isight I bought had some stuck pixels and was returned to apple for a new Isight. The new camera worked for a couple of days then screwed up the video with ichat and skype. Worked OK with Quicktime, Imovie, Quicktime Broadcast although it locked up like the first camera did when recording on native resolution in QT.
I hope my experience hasn't been typical of the Isight camera.
Why would it work with quicktime/imovie/quicktime broadcast but refuse to provide decent video to ichat or skype even after formatting and reinstalling everything. Why then would it work ok on a macbook with no problems but not work on an Ibook? Why would a firewire camcorder have no problems using any of the programs but then run into problems using an Isight camera?
ibook g4 12 Mac OS X (10.3.8)10.6 Snow Leopard will run on any Intel mac. So that's any Mac made in the last 6 years. Snow Leopard came out in July 2009 and only cost $29. So you had over 3 years to have upgraded your MacBook.
You're willing to pay a couple of hundred dollars for a new phone but not the $29 in the last three years to have upgraded your OS on your MacBook.
The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion or 10.8 Mountain Lion is part of the 10.6.6 update.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0 -
Is iSight camera recording disabled on the latest version of iMovie for Mavericks?
Using the latest version of iMovie for Mavericks, can we record directly from iSight camera, or the software only allows videos imported from HD Cameras and PhotoBooth?
Use the import button.
-
External isight camera with imovie on maverick?
Can someone please recommend an external iSight (or other) Camera to use which can record video directly into iMove on Maverick?
When trying to import a video, a drop down window shows the built-in iSight camera, as if options could possibly be available. If so, what might they be?
Thanks for any and all help!You're welcome, Bill.
Bill Cruise wrote: ... camera ... compatible with iMovie ...
Use built-in iSight camera or a tape-based camera or camcorder: iMovie '11: Record video directly into iMovie.
If you have access to an old tape-based mini-DV camcorder with Firewire connection capability, you can use it. For example, my old Sony DCR-TRV17 and DCR-TRV70 camcorders work great with iMovie, both for import and, when connected via Firewire cable, for recording directly into iMovie. Both give better resolution than my old external Firewire iSights, and the camcorders offer the possibility of manual focus and zoom controls when needed.
As an alternative to recording directly into iMovie, record video and save movie files using QuickTimeX and a camera built into your Apple display or Mac, a DV camera connected via FireWire, and some USB webcams. Then Import the movie files into iMovie for editing.
Bill Cruise wrote: ... Apple iSight camera ... is no longer sold or supported by Apple... I may go ahead and buy one...
My external iSights (I have two) are great webcams, but they are getting old as consumer electronics go. Both of mine still work as well as they did when they were new. However, some previously owned or even NOS (new, old stock) iSights may have been damaged by rough treatment or improper storage.
An honest seller may offer you return or exchange privileges. If not, and if you don't want to spend the money to have your external iSight serviced, consider a new, Mac-compatible USB cam instead.
A new cam will include a current manufacturer's warranty, and a USB cam is not subject to the possible conflicts that can cause difficulties with the old Firewire-connected iSights.
Bill Cruise wrote:...Wonder why this info is so far to find? ...
It should not be. Let us know the specifics, and we will try to guide you to any other info you still need.
Bill Cruise wrote: ... better alternatives...using external cameras, and then importing the movie....works, but seems like quite a bit of extra hassle versus direct input to iMovie.
When your Mac recognizes more than one connected compatible camera, the others will also show in your a drop down window that shows the built-in iSight camera.
In fact the best alternative I have found for recording directly into iMovie is to use the built-in iSight camera in my MacBook Pros and my Apple LED Display. The resolution of any of these built-ins is better than the 640x480 of the old external Firewire iSights. The built-ins are also higher resolution than my old Sony camcorders.
As for your "extra hassle" comments, once you try using QuickTimeX and importing into iMovie, I doubt that you will find it a problem unless recording video is your primary use of your Mac. It is very easy to do, and you can use the QuickTime file as a good backup for your original source material that is easy to offload to a different disk for safekeeping.
Maybe you are looking for
-
Solution: iMac Address Book - Issues when Editing or Deleting Contacts
Is there a way to select a bunch of similarly posted questions and propose to "ALL" an answer or solution? Hardware & Version: I have the iMac OS X Lion 10.7.4 (as of this writing) Every so often, after updates, there seems to be rights issues with
-
I have recently upgrades to Mountain Lion and I can not get the calendar utility to come alive. Icon appears in the tast bar but the application does not launch or appear to be any where else. Any suggestion?
-
List employee details empno,ename,job,DOB, retire_date. i want Retire date=bod + 58 year.. Display DOB in 'dd-mon-yyyy' format and retire_date in 'mon-yyyy' Edited by: 1008586 on Jun 5, 2013 8:26 PM Edited by: 1008586 on Jun 5, 2013 8:30 PM
-
Hi! I have problem with saving in PDF. I am croatian and we are use č,ć,ž,š,đ whan I go to my AI file I am see č,ć,ž,š,đ and whan save in PDF everything is great. But Whan i open PDF file i have small "cube" instead č,ć,ž,š. This is picture of issue
-
How to stop "Create New CSS Rule" dialog box
Made the mistake of allowing an Apple tech talk me into an OS X "Install in place". He assured me that all application settings would remain the same as before. Now, when holding down the "shift" key and typing a word in all caps (in Design View), th