Import table to differnet schema using data pump
Hello All,
I am trying to export a table from schema MIPS_MDM and import it to MIPS_QUIRINO schema in different database. I am getting the below error.
expdp MIPS_MDM/MIPS_MDM@ext01mdm tables=QUARANTINE directory=DP_EXP_DIR dumpfile=quarantine.dmp logfile=qunat.log
To Import
impdp MIPS_QUIRINO/MIPS_QUIRINO@mps01dev tables=QUARANTINE directory=DP_EXP_DIR dumpfile=quarantine.dmp logfile=impd.log
Please can I know what is the exact syntax to import in the differnet schema.
thanks.
Error when importing is
To Import
impdp MIPS_QUIRINO/MIPS_QUIRINO@mps01dev tables=QUARANTINE directory=DP_EXP_DIR dumpfile=quarantine.dmp logfile=impd.log
ORA-39166: Object MIPS_QUIRINO.QUARANTINE was not found.
Please can I know what is the exact syntax to import in the differnet schema.
thanks.
Similar Messages
-
EXPORT ONLY TABLES IN A SCHEMA USING DATA PUMP
Hi folks,
Good day. I will appreciate if I can get a data pump command to export only TABLE oBJECT in a specific shema .
The server is a 4 node RAC with 16 CPU per node.
Thanks in advanceIf all you want is the table definitions, why can you use something like:
expdp user/password direcory=my_dir dumfile=my_dump.dmp tables=schama1.table1,schema1.table2,etc content=metadata_only include=table
This will export just the table definitions. If you want the data to, then remove the content=metadata_only, if you want the dependent objects, like indexes, table_statistics, etc, then remove the include=table.
Dean -
Procedure to Export schema using DATA PUMP
Hi All,
This is pandiarajan and i want to know the procedure to export schema using datapump in oracle 10g.
Please help me
Thanks in Advanceexpdp directory=<xxxxx> dumpfile=<yyyyyyy> schemas=<schema name>
-
Query to obtain tables in SH schema using data-dictionary views/tables.
Hi,
I have just installed Oracle 10g Database. Logged on to SQL Plus by scott (changed the password as prompted).
I want to see the tables in SH schema (which comes by default with Oracle 10g database).
The problem, I am facing is:
I can see the schema name: SH in the result of the below query:
SELECT * FROM ALL_USERS
but, nothing is returned in the result of the below query:
SQL> SELECT OWNER FROM ALL_TABLES WHERE OWNER='SH';
Result: no rows selected.
Why is this happening?
What will be the correct query to obtain tables present in SH schema ?
Thanks in Advance & Regards,
Deebaconn /as sysdba
SQL> select table_name from dba_tables where owner='SH';
I think the user SCOTT have no privilege to see SH schema tables through all_tables view.
Thanks -
Import schemas using data pump
Hi
I have taken full schema export dump using exp ..
(expdp username/password directory=dump dumpfile=scott.dmp schams=scott)
When i try to import this dump into another schema , i am getting the error user scott doesn't exist.. How to over come this.. put ur ideas and suggestions
following is the command i tried:
(impdp username/pasword directory=dump dumpfile=scott.dmp)
(impdp username/pasword directory=dump dumpfile=scott.dmp schemas=test)Hi
You can watch the documentation for import.
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96652/ch02.htm#1005922
Think you have to use the "FROMUSER", "TOUSER" clause for import.
Hope it helps -
How to create/import a target schema from a source schema using data pump?
I have seen some examples where schema remapping will be done through remote link which I cannot as both the target schema and source schema are in same machine ...but I am not sure how to do it with out using remote link? I would be great if some one could provide a example
Thanks in AdvanceI'm not sure what you are asking here, but I'll try to give some examples on remapping a schema:
expdp prived_user/password schemas=orig_schema_1 directory=dpump_dir dumpfile=orig_schema_1.dmp
impdp prived_user/password schemas=orig_schema_1 directory=dpump_dir dumpfile=orig_schema_1.dmp remap_schema=orig_schema_1:new_schema_1
If you want to try without a dumpfile then you need a loop back dblink. (A dblink on your database that points to the same database. This would be your command:
impdp prived_user/password schemas=orig_schema_1 directory=dpump_dir network_link=loop_back_link remap_schema=orig_schema_1:new_schema_1
Hope this helps. If not, can you explain your question a little more?
Dean -
Error while exporting a schema using data pump
Hi all,
I have 11.1.0.7 database and am using expdp to export a schema. The schema is quite huge and has roughly about 4 GB of data. When i export using the following command,
expdp owb_exp_v1/welcome directory=dmpdir dumpfile=owb_exp_v1.dmp
i get the following error after running for around 1 hour.
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA [TABLESPACE_QUOTA:"OWB_EXP_V1"]
ORA-22813: operand value exceeds system limits
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 7839
----- PL/SQL Call Stack -----
object line object
handle number name
4A974B9C 18237 package body SYS.KUPW$WORKER
4A974B9C 7866 package body SYS.KUPW$WORKER
4A974B9C 2744 package body SYS.KUPW$WORKER
4A974B9C 8504 package body SYS.KUPW$WORKER
4A961BF0 1 anonymous block
4A9DAA4C 1575 package body SYS.DBMS_SQL
4A974B9C 8342 package body SYS.KUPW$WORKER
4A974B9C 1545 package body SYS.KUPW$WORKER
4A8CD200 2 anonymous block
Job "SYS"."SYS_EXPORT_SCHEMA_01" stopped due to fatal error at 14:01:23
This owb_exp_v1 user has dba privileges. I am not sure what is causing this error. I have tried running it almost thrice but in vain. I also tried increasing the sort_area_size parameter. Even then, i get this error.
Kindly help.
Thanks,
VidhyaHi,
Can you let us know what the last object type it was working on? It would be the line in the log file that looks like:
Processing object type SCHEMA_EXPORT/...
Thanks
Dean -
What are the 'gotcha' for exporting using Data Pump(10205) from HPUX to Win
Hello,
I have to export a schema using data pump from 10205 on HPUX 64bit to Windows 64bit same 10205 version database. What are the 'gotcha' can I expect from doing this? I mean export data pump is cross platform so this sounds straight forward. But are there issues I might face from export data pump on HPUX platform and then import data dump on to Windows 2008 platform same database version 10205? Thank you in advance.On the HPUX database, run this statement and look for the value for NLS_CHARACTERSET
SQL> select * from NLS_DATABASE_PARAMETERS;http://docs.oracle.com/cd/B19306_01/server.102/b14237/statviews_4218.htm#sthref2018
When creating the database on Windows, you have two options - manually create the database or use DBCA. If you plan to create the database manually, specify the database characterset in the CREATE DATABASE statement - http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_5004.htm#SQLRF01204
If using DBCA, see http://docs.oracle.com/cd/B19306_01/server.102/b14196/install.htm#ADMQS0021 (especially http://docs.oracle.com/cd/B19306_01/server.102/b14196/install.htm#BABJBDIF)
HTH
Srini -
Select table when import using Data Pump API
Hi,
Sorry for the trivial question, I export the data using Data Pump API, with "TABLE" mode.
So all tables will be exported in one .dmp file.
My question is, then how to import few tables only using Data Pump API?, how to define "TABLES" property like command line interface?
should I use DATA_FILTER procedures?, if yes how to do that?
Really thanks in advance
Regards,
KahlilHi,
You should be using metadata_filter procedure for the same.
eg:
dbms_datapump.metadata_filter
(handle1
,'NAME_EXPR'
,'IN (''TABLE1'', '"TABLE2'')'
{code}
Regards
Anurag -
Using Data Pump when database is read-only
Hello
I used flashback and returned my database to the past time then I opened the database read only
then I wanted use data pump(expdp) for exporting a schema but I encounter this error
ORA-31626: job does not exist
ORA-31633: unable to create master table "SYS.SYS_EXPORT_SCHEMA_05"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT", line 863
ORA-16000: database open for read-only access
but I could by exp, export that schema
My question is that , don't I can use Data Pump while database is read only ? or do you know any resolution for the issue ?
thanksYou need to use NETWORK_LINK, so the required tables are created in a read/write database and the data is read from the read only database using a database link:
SYSTEM@db_rw> create database link db_r_only
2 connect to system identified by oracle using 'db_r_only';
$ expdp system/oracle@db_rw network_link=db_r_only directory=data_pump_dir schemas=scott dumpfile=scott.dmpbut I tried it with 10.2.0.4 and found and error:
Export: Release 10.2.0.4.0 - Production on Thursday, 27 November, 2008 9:26:31
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39006: internal error
ORA-39065: unexpected master process exception in DISPATCH
ORA-02054: transaction 1.36.340 in-doubt
ORA-16000: database open for read-only access
ORA-02063: preceding line from DB_R_ONLY
ORA-39097: Data Pump job encountered unexpected error -2054
I found in Metalink the bug 7331929 which is solved in 11.2! I haven't tested this procedure with prior versions or with 11g so I don't know if this bug only affects to 10.2.0.4 or 10* and 11.1*
HTH
Enrique
PS. If your problem was solved, consider marking the question as answered. -
How to export resource manager consumer groups using Data Pump?
Hi, there,
Is there any way to export RM Consumer Groups/Mappings/Plans as part of a Data Pump export/import? I was wondering because I don't fancy doing it manually and I don't see the object in the database_export_objects view. I can create them manually, but was wondering whether there's an easier, less involved way of doing it?
MarkHi,
I have not tested it but i think a full db export/import (using data pump or traditional exp/imp) may help doing this (which might not be feasible for you to have full exp/imp) because full database mode exports/imports SYS schema objects also, so there is a chance that it will also import the resource group and resource plans.
Salman -
Migration from 10g to 12c using data pump
hi there, while I've used data pump at the schema level before, I'm rather new at full database imports.
we are attempting a full database migration from 10.2.0.4 to 12c using the full database data pump method over db link.
the DBA has advised that we avoid moving SYSTEM and SYSAUX objects. but initially when reviewing the documentation it appeared that these objects would not be exported from the target system given TRANSPORTABLE=NEVER. can someone confirm this? the export/import log refers to objects that I believed would not be targeted:
23-FEB-15 19:41:11.684:
Estimated 3718 TABLE_DATA objects in 77 seconds
23-FEB-15 19:41:12.450: Total estimation using BLOCKS method: 52.93 GB
23-FEB-15 19:41:14.058: Processing object type DATABASE_EXPORT/TABLESPACE
23-FEB-15 20:10:33.185: ORA-31684: Object type TABLESPACE:"UNDOTBS1" already exists
23-FEB-15 20:10:33.185: ORA-31684: Object type TABLESPACE:"SYSAUX" already exists
23-FEB-15 20:10:33.185: ORA-31684: Object type TABLESPACE:"TEMP" already exists
23-FEB-15 20:10:33.185: ORA-31684: Object type TABLESPACE:"USERS" already exists
23-FEB-15 20:10:33.200:
Completed 96 TABLESPACE objects in 1759 seconds
23-FEB-15 20:10:33.208: Processing object type DATABASE_EXPORT/PROFILE
23-FEB-15 20:10:33.445:
Completed 7 PROFILE objects in 1 seconds
23-FEB-15 20:10:33.453: Processing object type DATABASE_EXPORT/SYS_USER/USER
23-FEB-15 20:10:33.842:
Completed 1 USER objects in 0 seconds
23-FEB-15 20:10:33.852: Processing object type DATABASE_EXPORT/SCHEMA/USER
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"OUTLN" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"ANONYMOUS" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"OLAPSYS" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"MDDATA" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"SCOTT" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"LLTEST" already exists
23-FEB-15 20:10:52.372:
Completed 1140 USER objects in 19 seconds
23-FEB-15 20:10:52.375: Processing object type DATABASE_EXPORT/ROLE
23-FEB-15 20:10:55.255: ORA-31684: Object type ROLE:"SELECT_CATALOG_ROLE" already exists
23-FEB-15 20:10:55.255: ORA-31684: Object type ROLE:"EXECUTE_CATALOG_ROLE" already exists
23-FEB-15 20:10:55.255: ORA-31684: Object type ROLE:"DELETE_CATALOG_ROLE" already exists
23-FEB-15 20:10:55.256: ORA-31684: Object type ROLE:"RECOVERY_CATALOG_OWNER" already exists
any insight most appreciated.Schema's SYS,CTXSYS, MDSYS and ORDSYS are Not Exported using exp/expdp
Doc ID: Note:228482.1
I suppose he already installed a software 12c and created a database itseems - So when you imported you might have this "already exists"
Whenever the database is created and software installed by default system,sys,sysaux will be created. -
Best Approach for using Data Pump
Hi,
I configured a new database which I set up with schemas that I imported in from another production database. Now, before this database becomes the new production database, I need to re-import the schemas so that the data is up-to-date.
Is there a way to use Data Pump so that I don't have to drop all the schemas first? Can I just export the schemas and somehow just overwrite what's in there already?
Thanks,
NoraHi, you can use the NETWORK_LINK parameter for import data from other remote database.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_import.htm#i1007380
Regards. -
How to consolidate data files using data pump when migrating 10g to 11g?
We have one 10.2.0.4 database to be migrated to a new box running 11.2.0.1. The 10g database has too many data files scattered within too many file systems. I'd like to consolidate the data files into one or two large chunk in one file systems. Both OSs are RHEL 5. How should I do that using Data Pump Export/Import? I knew there is "Remap" option could be used, but it's only one to one mapping. How can I map multiple old data files into one new data file?
hi
datapump is terribly slow, make sure you have as much memory as possible allocated for Oracle but the bottleneck can be I/O throughput.
Use PARALLEL option, set also these ones:
* DISK_ASYNCH_IO=TRUE
* DB_BLOCK_CHECKING=FALSE
* DB_BLOCK_CHECKSUM=FALSE
set high enough to allow for maximum parallelism:
* PROCESSES
* SESSIONS
* PARALLEL_MAX_SERVERS
more:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/dp_perf.htm
that's it, patience welcome ;-)
P.S.
For maximum throughput, do not set PARALLEL to much more than twice the number of CPUs (two workers for each CPU).
Edited by: g777 on 2011-02-02 09:53
P.S.2
breaking news ;-)
I am playing now with storage performance and I turned the option of disk cache (also called write-back cache) to ON (goes at least along with RAID0 and 5 and setting it you don't lose any data on that volume) - and it gave me 1,5 to 2 times speed-up!
Some says there's a risk of lose of more data when outage happens, but there's always such a risk even though you can lose less. Anyway if you can afford it (and with import it's OK, as it ss not a production at that moment) - I recommend to try. Takes 15 minutes, but you can gain 2,5 hours out of 10 of normal importing.
Edited by: g777 on 2011-02-02 14:52 -
Is it possible to export tables from diffrent schema using expdp?
Hi,
We can export tables from different schema using exp. Ex: exp user/pass file=sample.dmp log=sample.log tables=scott.dept,system.sales ...But
Is it possible in expdp?
Thanks in advance ..
Thanks,Hi,
you have to use "schemas=user1,user2 include=table:"in('table1,table2')" use parfileexpdp scott/tiger@db10g schemas=SCOTT include=TABLE:"IN ('EMP', 'DEPT')" directory=TEST_DIR dumpfile=SCOTT.dmp logfile=expdpSCOTT.log{quote}
I am not able to perform it using parfile also.Using parfile it shows "UDE-00010: multiple job modes requested, schema and tables."
When trying the below, i get error
{code}
bash-3.00$ expdp directory=EXP_DUMP dumpfile=test.dmp logfile=test.log SCHEMAS=(\'MM\',\'MMM\') include=TABLE:\"IN\(\'EA_EET_TMP\',\'WS_DT\'\)\"
Export: Release 10.2.0.4.0 - 64bit Production on Friday, 15 October, 2010 18:34:32
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Username: / as sysdba
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SYS"."SYS_EXPORT_SCHEMA_01": /******** AS SYSDBA directory=EXP_DUMP dumpfile=test.dmp logfile=test.log SCHEMAS=('MM','MMM') include=TABLE:"IN('EA_EET_TMP','WS_DT')"
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 0 KB
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
. . exported "MM"."EA_EET_TMP" 0 KB 0 rows
ORA-39165: Schema MMM was not found.
Master table "SYS"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for SYS.SYS_EXPORT_SCHEMA_01 is:
/export/home/nucleus/dump/test.dmp
Job "SYS"."SYS_EXPORT_SCHEMA_01" completed with 1 error(s) at 18:35:19
{code}
When checking expdp help=y shows :-
{code}TABLES Identifies a list of tables to export - one schema only.{code}
As per few testing,tables from different schemas are not possible to export using expdp in a single command.
Anand
Maybe you are looking for
-
Question about downloading and accessing video in FC Express. HELP!
Very new to Final Cut Express.... Is it possible to download video (from a Canon Vixia HD30) via firewire to an external drive then access the video footage for FC Express from that drive? Or does the footage still need to move to the computers drive
-
hello i have a few problems and i hope somebody has a solution my first problem is that how can i install windows vista without using a disk drive and my second problem is that should i tick mark the option which says Install windows 7 while using bo
-
i have post it in New To Java while i post it again in this Forum. my question is below: i want to let java connect with oracledatabase. and how to do with it? who can give me some example? thanks!
-
How do I cut and paste files on Mavericks?
How do I cut and paste files from Mac to External Hard disk? I was copying them and later moving the files from Mac to trash and then emptying the trash. This is so lengthy and time wasting process that Apple
-
When i update my ipod the computer no longer recognizes it
i have a 30 4 button click wheel and i have tried to update it and the computer no longer recognizes it. i then have to restore the ipod and software and everything works fine, but i would like to find the way to have it updated.