Import terminated during TBATG CONVERSION OF DD-OBJECTS with return code 12

Hi,
When we are doing an import, a particular transport fails with the error message
'Import terminated during TBATG CONVERSION OF DD-OBJECTS with return code 12
We are not able to determine, why its failing. If you guys have come across this error message, can you please let me know how you resolved it?
Thanks,
Sri

Hi,
Pls attach error file with this.
Regards,
Payal Patel

Similar Messages

Importing error Ended with return code: === 8 ===

Hi Experts,
I am trying to transporting an infoobject 0EMPLOYEE from Dev to Production.While importing the request I am getting an error like
Execution of programs after import (XPRA)
Transport request : BD1K901543
System : BP1
tp path : tp
Version and release: 372.04.36 700
Execution of programs after import (XPRA)
End date and time : 20090206164251
Ended with return code: ===> 8 <===
after expanding this error msg i am getting
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
by clicking on the error mag
Diagnosis;
If the characteristic is used in an InfoProvider with dimensions (for example, an InfoCube or MultiProvider), the compounded unit is not unique if currency key figures are used at the same time.
System Response
This type of modeling is not supported.
Procedure
Replace the currency with a different characteristic. If you nevertheless want to use a unit in the compounding, you should use the modeling of a characteristic that semantically represents a unit. To do so, copy the technical properties of the unit of measure or the currency.
How can I solve this problem?
Can add any other char to this compounding char is it works?if yes which currency char i need to add here?
Thanks & Regards,
Sridhar

Hi Sridhar,
 I am facing the problem with 0CM_CTAR and 0CM_SHAR. both the characteristics are not allowed compouding ATTRIBUTES.
0cm_ctar not allowed comp .attr of 0unit_dim
0cm_shar not allowed comp.attr 0f area_unit.
for this reason what i need to do. Please give me help on this.
sridhar could you give me solution what i need to do. i am also implement same sap note or any other solution you have.
Please kindly give me reply.
Thnaks,
Guna.
Edited by: gunasekhar raya on Apr 14, 2009 6:16 PM

-Support package-Test import---Ended with return code: === 8 ===(Urgent)

Dear all, using -
> SAP ECC 6.0 with IS - AFS 6.0
Environment -- Win2k3 with Orc 10.2
Kernel 700 - 75
Spam/Saint - 70026
R3trans -d <0000>
STMS is very consistent.
Met all the pre-requisites when applying Support packs & going succesfull
but
While applying
Sapk-60004inafs CRT with sapkh 60009,10,11 in
Test_import phase it is showing the following error for
sapkh 60010.
Test import
Transport request : SAPKH60010
System : MBD
tp path : tp
Version and release: 370.00.09 700
R3TRPROGJ_1IRUTZN was repaired in this system
R3TRPROGJ_1IRUTZN was repaired in this system
Test import
End date and time : 20080410100230
Ended with return code: ===> 8 <===
When im runing with 700-75 is it possoble to import latest TP
<SAR tp_145-20001354.sar TP 145 Info 3317 30.01.2008 >
in to existing kernel. plaese coment on this as i think it's a TP error.
please also advice me in different areas.
Cheers,
Rahul

HI thanx a lot ,
It the same procedure i did & checked your message indicating the same steps .
Yes ,standard object is repaired in system & im not aware of that
& even it is not shown that it is recorded to work bench change request when i started applying the support pack.
I did the same went to SE03 selected the object .
Selected lock overview
Identified the change request & released it.
I got one more doubt what happens when i set the object to repair flag.
Cheers ,
Rahul

[Error during Export] R3load exited with return code 11

Hi guys,
While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
Unloading of 'REGUC' export package is interrupted with R3load error.
Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
For mode details see 'REGUC.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REGUC.log details:
(As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
/usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
/usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
Compiled Jul 23 2013 21:30:53
/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC001.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
Any hint of what is causing this error?
(Please disregard any Filesystem issues since all of them have available space)
Best!

After using latest R3load patch, it provides furher information on the log file.
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
017805)
DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
(note 1821404)
--------------------- End of patch information -------------------------
process id 27326
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC003.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "ecp                                                             "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
(GSI) INFO: instno   = "6120023288"
(RTF) ########## WARNING ###########
        Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
(EXP) INFO: table REGUC will be exported with sorting (task modifier)
------------------ C-STACK ----------------------
[0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
94
[1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
ffffff7b9627e4
[2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
at 0xffffffff7b9623b0
[3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
b961eb4
[4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
ff7b961c28
[5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
[6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
x1000d1ce8
[7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
0 ), at 0x1000d188c
[8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
[9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
0xb3, 0x1058c8f84 ), at 0x1000d0408
[10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
f944
[11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
at 0x1000ce314
[12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
0 ), at 0x1000cdb18
[13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
0x10077d8c0, 0x0 ), at 0x1000cd10c
[14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
[15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
32e0, 0x10077d8c0 ), at 0x1000b2f58
[16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
x1000b1f8c
[17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
), at 0x100062714
[18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
0x100064644
[19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
0 ), at 0x10007162c
[20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
[21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
[22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
fffff7bb47540 ), at 0x10006d148
[23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
1005fc290, 0x0 ), at 0x1000514e0

BR292I Execution of BRARCHIVE terminated with return code 1

Hi,
After the log sequence for the archives reaches 99999, the
brarchive is returning this error message :
BR292I Execution of BRARCHIVE terminated with return code 1
And the logs files were not archived.

Please don't double post the same question:
BR292I Execution of BRARCHIVE terminated with return code 1
Markus

Error while importing SPAM version 7.0/33 Tp ended with error code 12.

Hi all,
Os: Windows 2003 advanced server
DB: MaxDB 7.6
SAP: NetWeaver 2004S - (ABAP+JAVA) EP
When i was trying to import latest SAPM on the system. V 7.0/33 it got stopped in the middle at
IMPORT_PROPER phase.
Please find the error as follows:
The import was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
 - Error in phase: IMPORT_PROPER
 - Reason for error: TP_STEP_FAILURE
 - Return code: 0012
 - Error message: OCS Package SAPKD70033, tp step "R", return code
 0012
Notes on phase IMPORT_PROPER
In this phase repository objects and table entries are imported. This
phase can terminate due to the following reasons:
o TP_INTERFACE_FAILURE: The tp interface could not be called.
o TP_FAILURE: The program tp could not be executed. For more
 information on this, see the SLOG or ALOG log file.
o TP_STEP_FAILURE: A tp step could not be executed. To find the cause
 of the error, see the appropriate log, such as the import log.
 If the cancelation message contains a tp step 6, N or S, the step in
 question is independent of the transport request. You can find these
 logs under the node Import steps not specific to transport request
 in the log overview.
 Alternatively, you can find these logs in the following files in the
log directory of your transport directory (usually:
/usr/sap/trans/log):
- tp Step 6: P<YY><MM><DD>.<SID>
- tp Step N: N<YY><MM><DD>.<SID>
- tp Step S: DS<YY><MM><DD>.<SID>
You can display these files using the report RSPUTPRT or by calling the
transaction AL11.
A prerequisite of the Support Package Manager is that the Change and
Transport System (CTS) is configured correctly. For more detailed
information, read the online documentation available from Help -> SAP
Library -> mySAP Technology Components -> SAP Web Application Server ->
Change and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
In the import log file the errors was :
Program terminated (job: RDDEXECL, no.: 14444101)
Job log for this job is ;
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server nanadual were synchronized
ABAP/4 processor: SYSTEM_RUDI_INVALID
Job cancelled
Please let me know if you need more details...
Best Regards,
Nanda

Hi Nanda,
Please check your trans log for further details .
It cud be caused due to unavailability of RDDIMPDP batch job which is mandatory for any SPAM / SP updates to work.
If this is the case you wud require to trigger the batch job RDDIMPDP using report RDDNEWPP(From SE38). This needs to be triggered in 000 as well as other existing clients too.
once this is done please resume your SPAM Update. it shud go ahead.
Next possibility that you cud check is updating your tp / R3trans with latest available from Service market place.
Hope this helps you.
Regards,
Prem

Import stuck at phase XPRA_EXECUTION with return code 12,

Dear experts,
I am trying to upgrade our ERP system from SP-level 10 to SP-level 16. The main import is finished. But now I am stuck with this error:
Error in phase: XPRA+EXECUTION
Reason for error: TP_STEP_FAILURE
Return Code: 0012
Error message: OCS Package SAPKW70011, tp step R, return cpde 0012
Looking at the import logs in TRN SPAM there is the same error written for all of the following packages:
SAPKW70011, SAPKW70012, u2026, SAPKW70020
SAPK-60007INECCDIMP, SAPK60008INECCDIMP, u2026, SAPK-60016INECCDIMP
The import logs say the import was terminated at the program RDDEXECL.
Joblog of RDDECL:
Step 001 started (program RDDEXECL, variant , user DDIC
All DB buffers of application server xxxxx were synchronized
ABAP/4 processor:
Job cancelled
The long text of ABAP/4 processor only tells me a runtime error and that the short dump could not be written.
Transaction ST22 shows that there is a DDIC_TYPE_INCONSISTENCY:
Short text:
Inconsistency in the Dictionary for the structure "RSDCUBEV"
What happened?
Error in the SAP kernel.
The current ABAP "SAPLMGV_LAMA_SCR" program had to be terminated because the ABAP processor detected an internel system error.
I have implemented (if applicable) all the recommendations from Note 822379. I've adjusted modifications, however, the same error persists.
What can I do? Please advise!!
Many thanks in advance!

Thanks very much Juan, this note has indeed pointed me in the right direction, in the end I've only activated the inconsistent table RSDCUBEV in SE11 and afterwards was able to continue the queue import.
regards
Manfred

List of Authorization Object with Transaction Code

Dear All ,
Does SAP provide any report to list all the Authorization Object ? and which object is belong to which transaction code ?
Thanks .

hi olrang ,
STEP BY STEP TO CREATE AUTHORIZATION OBJECT:
STEP1: goto SU21 transaction and create a new Authorization Object
Object Name: Z.....
Text: ...........
ClassL SD (YOUR MODULE)
AUTHOR: YOUR ID
STEP2: Give authorizatin fields as
ACTION - Action of the Authorization
Activity - Document Destribution.
STEP3: Basis will create a role using transaction PFCG and assign this authorization object to that role.
STEP4: Call the AUTHORITY-CHECK Object in your code.
AUTHORITY-CHECK OBJECT <authorization object>
ID <authority field 1> FIELD <field value 1>.
ID <authority field 2> FIELD <field value 2>.
IF sy-subrc 0.
MESSAGE e000(zzpp) WITH 'No Authorization'.
ENDIF.
and it belongs to SU24 transaction code
Saurabh Goel

Exception Deployer fails with return code 1603 during Acrobat XI installation

We are deploying Acrobat XI to Windows 7 clients and a percentage of them fail to execute Exception Deployer successfully and are returning the 1603 return code. I have pasted below relevant portions of the ExceptionDeployer.log file from two different computers with the same return code. Sometimes running the installation again works but sometimes it fails again with the same error code. I haven't been able to find exactly what it is that is failing or how to resolve this.
4/4/2015 00:04:57 [INFO] ExceptionDeployer - ##################################################
4/4/2015 00:04:57 [INFO] ExceptionDeployer - Launching the ExceptionDeployer...
4/4/2015 00:04:57 [WARN] ExceptionDeployer - Failed to initialize the TokenResolver properly.
4/4/2015 00:04:57 [INFO] ExceptionDeployer - **************************************************
4/4/2015 00:04:57 [INFO] ExceptionDeployer - AcrobatProfessional11.0-mul
4/4/2015 00:05:59 [INFO] ExceptionDeployer - The process return code is (1603).
4/4/2015 00:05:59 [ERROR] ExceptionDeployer - Exception deployment failed for payload (AcrobatProfessional11.0-mul)
4/4/2015 00:05:59 [INFO] ExceptionDeployer - **************************************************
4/6/2015 16:05:56 [INFO] ExceptionDeployer - ##################################################
4/6/2015 16:05:56 [INFO] ExceptionDeployer - Launching the ExceptionDeployer...
4/6/2015 16:05:56 [INFO] ExceptionDeployer - **************************************************
4/6/2015 16:05:56 [INFO] ExceptionDeployer - AcrobatProfessional11.0-mul
4/6/2015 16:07:14 [INFO] ExceptionDeployer - The process return code is (1603).
4/6/2015 16:07:14 [ERROR] ExceptionDeployer - Exception deployment failed for payload (AcrobatProfessional11.0-mul)
4/6/2015 16:07:14 [INFO] ExceptionDeployer - **************************************************

Hi ohtesw,
Please check out this document: Error 1603: A fatal error occurred during installation.
If the solutions in that document don't do the trick, please let us know.
Best,
Sara

Transpot Request with return code 4 during Importing

HI All,
During importing the transport request It gave warning with 4.
IIt is with Flat File that is giving
No mapping defined for source system XMFile which ismy flat file ss.
CAn any body help me on that...
Regards,
MAdhu

Hi dear,
Yes, actually there is no need to worry, it i sjust a warning for your import ...
Nevertheless, if you see that your datasource is not connected, check that your falt file source system exists in your target system, and go to RSA1 -> Tools -> Conversion of Logical System Names, to convert the source system ...
Kind regards
Mickael

Return code 8: while importing req in target system

Hi friends,
i created one transport request for transporting custom appset to quality system.
while importing in quality i'm getting request status in red . checked log:
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: xxxxxxxxxxx
Post-processing taking place in client 999
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet XXXX in Client 999 for RFC
Import Step UPDPTAB completed without errors
Import Step ADMIN_DEF_UPD completed without errors
Import Step APPS_ADD completed without errors
Import Step DIM_ADD completed without errors
Characteristic /CPMB/NUD8H9B: Lower case makes selection of char. values difficult
Attribute /CPMB/MBRSEQ from characteristic /CPMB/NUD8H9B not (actively) available
Error in activating the InfoObjects
Failed to activate SAP NetWeaver BI InfoObject for dimension
Failed to create dimension attribute
End of after import methode RS_APPS_AFTER_IMPORT (Activation Mode) - runtime: 00:02:32
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: xxxxxxxx
 Ended with return code: ===> 8 <===
Return code 8 means:
8: Transport carried out with errors.
Individual objects could not be transported successfully.
Examples:
- The original object was not overwritten
- A repaired object was not overwritten
Could anyone eloborate usage of ujs_activate_content? we are on bpc75nw sp04
any suggestions pls to import request correctly.
Is there any specific steps to be followed for importing requsts in target system or just to import requests?
thanks.

hi Gersh,
I checked in dev system, infoObject /CPMB/NUD8H9B and its' attribute/CPMB/MBRSEQ. Both are active and infoObject /CPMB/NUD8H9B is under infoarea "custom appset".
But if i check it in target system both are inactive status and infoObject /CPMB/NUD8H9B is under unassigned node infoarea.
When i tried to activate infoobject via sap program, system couldn't do that and saying attribute is not in active state. Like wise several /cpmb/xxxxxx infoobjects are in status "inactive".
Do i need to activate standard appshell via ujs_activate_content program in order to activate all /cpmb/xxxx related infoobjects.
Or can i follow method of delete custom appset from target system and shadow table contents in source system. Then freshly creating new req in dev system. Is this solves my problem?
any suggestions pls.
thanks

ERP2005 SPS10 Return code 8 during TESTIMPORT

Good day,
I am having an issue whilst trying to import ERP2005 Support Stack 10. Sorry, not sure whether this is the correct place for this message?
During the TESTIMPORT phase I am getting return code 8 for import of the following packages with error:
SAPKE60017 (SAP_HR) - R3TRPROGMP002700 is in repair status, therefore cannot be imported.
SAPKH60008,09,10 (SAP_APPL) - R3TRFUGRF040 is in repair status, therefore cannot be imported.
SAPKB70011 and 12 (SAP_BASIS) - R3TRFUGRSZA1 is in repair status, therefore cannot be imported.
Procedure is to release the relevant repair and repeat the import.
Some errors I know can ignore according to note 822379 but I can't find any material relating to above anywhere. Also, I have asked developers to check to find requests with above objects and release them but they have no luck ?
Using kernel 700.102 as recommended with MaxDB 7.6.3.007 running on SLES9 SP3.
Any help much appreciated.
Thanks,
Nelis
Message was edited by:
Nelis Lamprecht

Refer to note9949. Seems even though the requests were released these objects were still flagged as being in a repair status. Re-setting this flag corrects the problem.
Thanks

SAP on V6R1 - ABAP Import:Program 'Migration Monitor' exits with error code

Hello,
We are doing an installation of SAP NW 7.01 SR1 on V6R1.
 
We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
 
We are again getting error in following steps:
 
sapinst.log
 
 WARNING 2009-09-30 23:25:28.477
Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
J9VM - 20090309_31291_BHdSMr
JIT - 20090210_1447ifx1_r8
GC - 200902_24)
I mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
 Loading of 'SAPNTAB' import package: OK
 Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28. 
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28. 
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28. 
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28. 
Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28. 
Loading of 'SAPAPPL1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28. 
Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28. 
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28. 
Loading of 'DD03L' import package: OK
Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28. 
Loading of 'SCPRSVALS' import package: OK
Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28. 
Loading of 'SAPSDIC' import package: OK
Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28. 
Loading of 'SCPRVALS' import package: OK
Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28. 
Loading of 'SAPSSRC' import package: OK
Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28. 
Loading of 'FUPARAREF' import package: OK
Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28. 
Loading of 'TODIR' import package: OK
Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28. 
Loading of 'SEOSUBCODF' import package: OK
Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28. 
Loading of 'E071K' import package: OK
Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28. 
Loading of 'SAPPOOL' import package: OK
Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28. 
Loading of 'SAPSPROT' import package: OK
Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28. 
Loading of 'SAPSDOCU' import package: OK
Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28. 
Loading of 'SAPCLUST' import package: OK
Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28. 
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28. 
Loading of 'SAPSLEXC' import package: OK
Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28. 
Loading of 'SAPUSER' import package: OK
Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28. 
Loading of 'SAPDDIM' import package: OK
Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28. 
Loading of 'SAPDFACT' import package: OK
Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28. 
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28. 
Loading of 'SAPUSER1' import package: OK
Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28. 
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28. 
Loading of 'SAPAPPL0' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28. 
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28. 
 
WARNING[E] 2009-09-30 23:25:28.524
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
 
ERROR 2009-09-30 23:25:28.914
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
 
 import_monitor.log.
 ****************************************************************************************************************************************************
 INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
 
INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
 
INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
 
WARNING: 2009-09-30 23:31:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-09-30 23:31:31
1 error(s) during processing of packages.
INFO: 2009-09-30 23:31:31
Import Monitor is stopped.
 *************************************************************************************************************************************************
 SAPAPPL02.LOG
 **************************************************************************************************************************************************
 TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: TVV1 created #20091001110304
 
(DB) INFO: TVV1 deleted/truncated #20091001110304
 
(IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
 
(DB) ERROR: DDL statement failed 
(ALTER TABLE "TVV1" DROP PRIMARY KEY ) 
DbSlExecute: rc = 99 
(SQL error -539) 
error message returned by DbSl:
Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
Your inputs will help a lot.
Regards,
Prasad

Hello,
We are doing an installation of SAP NW 7.01 SR1 on V6R1.
 
We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
 
We are again getting error in following steps:
 
sapinst.log
 
 WARNING 2009-09-30 23:25:28.477
Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
J9VM - 20090309_31291_BHdSMr
JIT - 20090210_1447ifx1_r8
GC - 200902_24)
I mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
 Loading of 'SAPNTAB' import package: OK
 Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28. 
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28. 
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28. 
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28. 
Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28. 
Loading of 'SAPAPPL1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28. 
Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28. 
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28. 
Loading of 'DD03L' import package: OK
Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28. 
Loading of 'SCPRSVALS' import package: OK
Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28. 
Loading of 'SAPSDIC' import package: OK
Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28. 
Loading of 'SCPRVALS' import package: OK
Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28. 
Loading of 'SAPSSRC' import package: OK
Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28. 
Loading of 'FUPARAREF' import package: OK
Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28. 
Loading of 'TODIR' import package: OK
Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28. 
Loading of 'SEOSUBCODF' import package: OK
Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28. 
Loading of 'E071K' import package: OK
Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28. 
Loading of 'SAPPOOL' import package: OK
Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28. 
Loading of 'SAPSPROT' import package: OK
Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28. 
Loading of 'SAPSDOCU' import package: OK
Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28. 
Loading of 'SAPCLUST' import package: OK
Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28. 
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28. 
Loading of 'SAPSLEXC' import package: OK
Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28. 
Loading of 'SAPUSER' import package: OK
Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28. 
Loading of 'SAPDDIM' import package: OK
Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28. 
Loading of 'SAPDFACT' import package: OK
Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28. 
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28. 
Loading of 'SAPUSER1' import package: OK
Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28. 
Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28. 
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28. 
Loading of 'SAPAPPL0' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28. 
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28. 
 
WARNING[E] 2009-09-30 23:25:28.524
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
 
ERROR 2009-09-30 23:25:28.914
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
 
 import_monitor.log.
 ****************************************************************************************************************************************************
 INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
 
INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
 
INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
 
WARNING: 2009-09-30 23:31:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-09-30 23:31:31
1 error(s) during processing of packages.
INFO: 2009-09-30 23:31:31
Import Monitor is stopped.
 *************************************************************************************************************************************************
 SAPAPPL02.LOG
 **************************************************************************************************************************************************
 TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: TVV1 created #20091001110304
 
(DB) INFO: TVV1 deleted/truncated #20091001110304
 
(IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
 
(DB) ERROR: DDL statement failed 
(ALTER TABLE "TVV1" DROP PRIMARY KEY ) 
DbSlExecute: rc = 99 
(SQL error -539) 
error message returned by DbSl:
Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
Your inputs will help a lot.
Regards,
Prasad

How to use Oracle objects in java code

Hi all!
I'm reading an xls and i need to fill me oracle objects with java code:
OBJECT_NAME OBJECT_TYPE
LETTURA_OBJ TYPE
LETTURA_OBJ TYPE BODY
In the past weeks i've been using both java code into oracle and oracle objects, but new i need to write those objects with data i read with java, anybody can help me?
I know that the easiest work around would be to put the data i read from the excel file into a table and then fill the oracle objects, but now i want to learn how to write directly those objects with a command like the following one:
a sample of the code i'm tryng to write:
CREATE OR REPLACE AND RESOLVE JAVA SOURCE NAMED REPORT."Manage_Excel_ASMBS" AS
import java.io.*;
import java.io.IOException;
import jxl.*;
public cass ....
#sql{ variabili_globali.var_ER_F3.Tipo_Lettura := 5}
thanks,
Massimo
Edited by: LinoPisto on 16-mag-2011 16.38

mmmh i'm not understanding so much....
well... as i told before i'm working in oracle database environment and i'm developing a java procedure.
now, i have this object
CREATE OR REPLACE
TYPE REPORT.FATTURA_OBJ AS OBJECT (
POD VARCHAR2(1000),
ID_FATTURA NUMBER,
ID_FILE NUMBER,
COERENZA_EA_F VARCHAR2(1000),
COERENZA_ER_F VARCHAR2(1000),
COERENZA_EA_M VARCHAR2(1000),
COERENZA_EF_M VARCHAR2(1000),
ANOMALIA VARCHAR2(1000),
MOTIVO_INVALIDAZIONE VARCHAR2(1000),
MATRICOLA_CONTATORE VARCHAR2(1000),
POTENZA_DISPONIBILE VARCHAR2(1000),
MEMBER PROCEDURE pulisci
/and i need to work with it inside this procedure:
CREATE OR REPLACE AND RESOLVE JAVA SOURCE NAMED REPORT."Manage_Excel_ASMBS" AS
import java.io.*;
import java.io.IOException;
import java.io.StringWriter;
public class Manage_Excel_ASMBS
public static void read_Excel(String inputFile,int var_Id_Caricamento, int var_Id_Distributore, String var_Distributore) throws SQLException, IOException
**here i need to put what i'm reading inside the excel file into oracle objects**
/can you please give me a sample ?
thanks

The import was stopped - return code 0013

Dea all,
I have a problem. I'm updating SPAM from level 7.00/0029 to level 7.00/0037.
The following details help you to analyze the problem:
The import was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
 - Error in phase: IMPORT_PROPER
 - Reason for error: TP_STEP_FAILURE
 - Return code: 0013
 - Error message: OCS Package SAPKD70037, tp step "I", return code
 0013
Please help me.
thanks a lot.

Yes I tried but it does not work.
Main import
Transport request : SAPKD70037
System : GT6
tp path : tp
Version and release: 372.04.78 700
R3trans version 6.14 (release 700 - 10.02.10 - 13:32:00).
unicode enabled version
===============================================
date&time : 26.02.2010 - 17:42:19
control file: /usr/sap/trans/tmp/SAPKKD70037.GT6
> #pid 7512 on ensv15wz (gt6adm)
> import
> buffersync=yes
> file='/usr/sap/trans/data/RD70037.SAP'
> continuation='/usr/sap/trans/data/RD70037_#.SAP'
> client cascade yes
> watchparallelprocesses yes
>
> excluding 'R3TRDDDD','R3TRDOMA','R3TRDTEL','R3TRENQU','R3TRMACO','R3TRMCID','R3TRMCOB','R3TRSHLP','R3TRSQLT','R3TRTABL','R3TRTTYP
R3trans was called as follows: R3trans -w /usr/sap/trans/tmp/SAPID70037.GT6 /usr/sap/trans/tmp/SAPKKD70037.GT6
Connected to DBMS = ORACLE dbs_ora_tnsname = 'GT6' SYSTEM = 'GT6'.
0 0
trace at level 1 opened for a given file pointer
================== STEP 1 =====================
date&time : 26.02.2010 - 17:42:19
function : IMPORT
data file : /usr/sap/trans/data/RD70037.SAP
Continuation : /usr/sap/trans/data/RD70037_#.SAP
buffersync : YES
clients : cascade
repeatimport : NO
repeatclimport : NO
c.s.i. : NO
watchparallelprocesses: YES
autorepeat : -1 (automatic)
l.s.m. : VECTOR
charsetadapt : YES
def. charset : WEUROPEAN
commit : 100000
table cache : dynamic
EXCLUDING : 'R3TRVIEW','R3TRUENO','R3TRTTYP','R3TRTABL','R3TRSQLT','R3TRSHLP','R3TRMCOB','R3TRMCID','R3TRMACO','R3TRENQU','R
clients which are protected against client cascade: 066
client cascade to: 000, 001, 010, 065, 100, 200, 300, 900, 910
Character set on this machine : 2 byte unicode little endian.
Character set on the data file: 2 byte unicode big endian.
Data file is compressed with algorithm 'L'.
Export was executed on 17.11.2009 at 16:48:17 by k7badm
700
with R3trans version: 20.04.09 - 13:27:00
Source System = Solaris on SPARCV9 CPU on DBMS = DB6 DB2DBDFT = 'K7B' SYSTEM = 'K7B'.
language vector during export: DE
language vector during export: DE (ISO-DEEN)
lsm during export: VECTOR
trfunction = D (patch transport)
switching to selective language import
language 'F' is installed, but no entries for this language were exported ('DE')
language 'I' is installed, but no entries for this language were exported ('DE')
language 'S' is installed, but no entries for this language were exported ('DE')
the following languages will be imported: DEFIS
Used Commandfile SAPKD70037 (SAPUSER/623)
Target client in E070C updated ( )
0 entries for E070 imported (SAPKD70037).
0 entries for E071 imported (SAPKD70037 *).
Start import R3TRCLASCL_OCS_ENVIRONMENT ...
1 entry for TADIR updated (R3TRCLASCL_OCS_ENVIRONMENT ).
STOP R3trans received signal 11 from operating system.
Main import
End date and time : 20100226174219
Ended with return code: ===> 13 <===

Import terminated during TBATG CONVERSION OF DD-OBJECTS with return code 12

Similar Messages

Maybe you are looking for