Import vhs to Mac but no image
Good afternoon,
I have a question regarding the import from a vhs tape to a Mac (Mac Book, with 10.5.2). I've got a Vhs player connected via Cinch cables to a DV Converter (by Formac called Studio TVR) and have that one connected to my computer. I am also using the software that came along with the Formac converter.
I presume that all is set up correctly but when I start recording I get the sound only and no image (only snow). I have also tried importing in iMovie but there I don't get audio nor video
Could anyone please help me with this?
cheers,
Marie-Anne
I'm not familiar with the Formac but I can tell you that converting from VHS to a Mac is very doable and usually straight forward.
I'd suggest the configuration or settings are incorrect somewhere.
FYI: If you can get your hands on a recent model Mini DV camera with in/outputs and PASS THROUGH ability, you can use this type of camera as an Analogue to Digital converter. This would replace the Formac if you do not get it fired up.
Al
Similar Messages
-
I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge. I have been successful doing this in the past, but now it is not working. I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2. Everything in iMovie looks like it is working. It reads "recording" in the upper left hand corner of the pane while the video is playing. When I stop the process to check on my clip it says that the file is empty. The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously. My system is about one year old. Any suggestions?
Hey, Clinton,
Thanks for your help! I was able to go to iMovie 9.0.9 and import video. I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support. They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded. That didn't change anything. In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge. But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2.
1. Open iMovie 9 (finder/applications/iMovie 9.0.9
2. Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
3. Close iMovie 9
4. Open iMovie 10 (probably in the dock)
5. File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events. Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.)
6. Select the clips and import. Click the blue "Import Selected" button on the bottom right.
You may get a message that some files cannot be imported. Click continue import. It's a little glitchy. It imports your clip, and also makes a copy of it, too. On the copy, the audio is normal, but the video is choppy. In any case, you would delete the copy, anyway.
Hope this additional information helps somebody else. Thanks again, Clinton for helping me! -
Hi, I have trouble loading my iPhone 5 photos into Aperture. The iPhone icon appears in the import window, but the images won't show up in the loading window
The iPhone icon appears in the import window, but the images won't show up in the loading window
Do your images show, if you disable the option "Do not import duplicates"? If yes, then check, if the images have already been imported, eg. using Photo Stream, if you are using Aperture 3.3 or later.
Aperture 2, Mac OS X (10.6.8)
Is your profile signature above still current? -
I am trying to play a DVD on my MacBook Pro and transmit it to my TV (using my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit the movie from my MacBook to the TV? I also tried an HDMI cable and had the same issue.
you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
this will display ur mbp main screen. good luck. -
How do I import an iPhoto Library (V.7.1.5) created on my old MacBook (10. 6.8) into my new Macbook pro (10.9.1) running iPhoto 9.5.1? I tried copying onto memory stick and moving to new mac, but new iPhoto doesn't recognise the library.
So what exactly did you copy over? If it's a 12 gig iPhoto Library then it sounds like the files are there. Perhaps the copy went wrong along the way.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Imported from cf but all images are mixed up
I have downloaded LR for a 30 day trial. I have succesfully imported images from
compact flash memory card.
BUT The images have not downloaded in order of the time taken. I therefore have a jumble of different photo shoots.
What do I need to do to avoid this happening again ?
How can I quickly sort these into the relevant folders so I can find them again eg: Wedding one, two, three
Thank U - Hoping someone can advise xTry changing the Sort order from Added Order to Captured Time when in the Library module, either using the View / Sort menu item up top, or using the Toolbar along the bottom of the Grid view that you may need to make visible using the T key.
As far as sorting things quickly into relevant folders, what folder or folders on your hard-drive are the photos in, now, and do the folders already exist you want to move the photos to or will you be creating them?
The way I move photos from one folder to a set of folders I create, is to select the photos I want to move in the Grid view, then go over to the folder listing at the left and right-click on the folder than is above where I want to create a new folder, then choose Create Folder Inside "xxxxxxxx", type in a name and also make sure Include Selected Photos is enabled, and then click Ok.
If the destination folder already exists in the folder list at the left, then just right-click on that folder in the folder view at the left and choose the Move option. -
just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?
The D610 didn't get out-of-the-box RAW support until Photoshop CC.
You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5. -
Attempted to import 6.5 GB of (v. 7.1.5) iPhotos from old iMac to new iMac (v. 9.2) using Migration Mgr. over fire wire. All photos (plus many dups) appeared in EVENTS and PHOTOS in the new Mac – but NO ALBUMS. I read a previous response to a similar question -- to copy the pictures library to the new computer. How best to do that?
There's actually an option to iPhoto Library Manager that makes this all almost work flawlessly (and work well enough for me). With the exception of Photo Albums that the pictures are part of, if you select "Library > Rebuild Library..." and then select "Scavange Orphaned Photos" check box, then it will put all the Photos and Movies into the "Scavanged Photos" album. It matches the modified pictures to their originals. It preserves all the event names and photo groupings. All the meta-data I could spot check it got right (although with 44k pictures, I only checked a few). If you fail to select this option, however, it will find no pictures at all when it goes to rebuild the library (this was true of the small test libraries I tried as well as the big, monster 280GB library I just finished converting). The conversion process took 5 hours to run, but in the end produced a library my new iPhoto can read and that I can interact with. I'll be suggesting to the iPhoto Library Manager folks a notation that would estimate the number of Orphaned Photos and display that number as a hint to the user that the option would be useful.
Edited: Thanks to Old Toad and LarryHN for their help in finding which of the many options to transition this library to 9.5.1 I needed to use. Sorry if I took my frustration of the past several months out on you guys for generously trying to help me. -
I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA
Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
Just go to the Library module, search for the desired photos, and resume working on these photos. -
I am using CC with both Edge Animate and Muse. After uploading to the website host it plays great on the Mac but images don't appear when I'm using Windows. Any suggestions?
Hi, VelveteenWebDesignGroup-
You're in luck! We just added in a feature to the latest version of Edge Animate CC (3.0) to enable the CDN option for OAM publish (what we call the "Animate Deployment Package"). This means that your Animate compositions can now references jQuery and the Animate runtime from the network instead of from the project directory. (Please note that this will only make sense for Dreamweaver and Muse integration with OAM and won't make sense for InDesign.)
To turn this on, launch Animate and go to File > Publish Settings. Then select the Animate Deployment Package on the left and click "Host runtime files on Adobe CDN." Save and publish, and you should be good to go.
Hope this helps,
-Elaine -
I have my home movies on DVD burned from Windows and am trying to import them into iMovie. The DVD will play on my Mac but I can't seem to import the movie. Can anyone help?
See my post here for how to do this.
-
I am trying to download photos off my IPhone as the "Cloud" tells me I have run out of storage space. I have connected my phone to IPhoto on my Mac but when I clik on Import nothing happens. What am I doing wrong?
Help for iCloud storage space >> Managing your iCloud storage
-
My old power book used an older version of iphoto, when I bought my macbook pro recently I tried to upload, from an external drive, my backed up files. The program opens with all the relevant folders down the left side but none of the image files will open; the boxes that would contain them are there, but greyed out.
I am now using iphoto '11 version 9.4.2, the original images that Im trying to recover from the ext HD are iphoto version 6. The EXT HD is formatted for mac and has been ok for all my other files that have been backed up.
When I boot up iphoto version 11 it looks like it always does and will open my current library of images. If I try to get images from the ext hd in this program the folder info is ok (down the left side) but the image boxes are greyed out. -
iMovie on my mac sees a video to import on my iPhone but I cannot find the video on the actual iPhone.
I also do not have any way to access the hidden feature. It is nowhere on my phone
-
Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx in advance!
I finally got a representative that was able to help me, she had me go to Get Info, by right clicking iMovie from the finder, and I had to click on Sharing & Permissions>Everyone>Read & Write
Maybe you are looking for
-
Why can't I open a new window?
Whenever I select "New Window" from under the "File" menu, nothing happens. The selection is shown as a blank under the "Window" menu. Upgraded to Firefox 5 hoping that would stop the problem, but the problem persists.
-
Makeing a person look like they are standing on the ground (instead of floating)
I have a picture of a sidewalk. I added a layer with a person standing there talking on the phone, but the person looks like they are floating (and not standing on the street layer). I can not find where it tells how to fix this. Thanks Bob
-
I have an iPod 2nd gen that keeps having an error code 9 when trying to restore. Any ideas on how to fix?
-
Keyboard Settings button disabled
On opening Region and Language > Input Sources, the wrench button is disabled. I can't figure out which package is needed to select that option despite searching around. Attached screenshot below. Anyone else ran into this on a fresh arch install wit
-
I want the Infromation and Documents about the OBIEE
Hi Friends, First of all a wish you all a happy christmas. I want the information about the modules in OBIEE and documents or totorials. I am Business Objects Expert since 4 years I am working for Business Objects. I am planning to learn OBIEE my com