Import video from CANON LEGRIA HF R18 into adobe premiere elements

Hallo,
I have a MAC and I don't know how I have to set the project to import videos from my camera.
Thanks

jazzandogospelsinger64
As a first pass at this I would transfer the video from the camera to the computer hard drive and from there import that into Premiere Elements 10 Mac with Premiere Elements 10 Mac Get Media/Files and Folder. Under the circumstances your Premiere Elements 10 will perform as a 32 bit application running in the 32 bit compatibility mode of the Mac 64 bit with the limitations of 32 bit. I am an Elements Windows user, but the principles and suggestions that I am about to make should be applicable to your situation. I have gone off track with any Mac specific details be sure to say so. The 32 bit business means that Premiere Elements 10 Mac will not be able to take advantage of all the 64 bit resources as would be the case if you had Premiere Elements 11 Mac running in a Mac 64 bit operating system.
Your Canon HF-R18 FXP would be highest quality 1920 x 1080 with a bitrate of 17 Mbps (megabits per second). I need to confirm if you are recording interlaced video 1920 x 1080 (50i) or 1920 x 1080 p25 (in the progressive mode). From what I have read your audio is Dolby Digital Stereo.
If 1920 x 1080 (50i, aka 25 interlaced frames per second), then use the Premiere Elements 10 project preset = PAL/AVCHD/Full HD1080i25.
If 1920 x 1080 (25p, 25 progressive frames per second), then use the Premiere Elements 10 project preset = PAL/DSLR/1080p/DSLR 1080p25.
In either circumstance, when you drag the file from the Media area to the Timeline, do you see a colored line over that content on the Timeline? You should not be seeing a colored line over this content if we have the correct project preset selected. But remember that, each time after you edit that video, it is normal for a red line to appear over it. That is the program telling you that you need to render the Timeline content, one way by pressing the Enter key of the computer main keyboard to get the best possible preview. When the rendering is complete, the red line will turn green. Thereafter, only a red/green indicator system (with all its implications) will exist for letting you know if the program thinks that you are seeing the best possible preview. No more non colored line choice, just red (need) and green (not needed). When you are in the no colored line or green situation, pressing the Enter key will just get you playback of the file in the monitor - no rendering available.
See what that looks like on the Timeline at playback there.
Let us start there and be ready for the next phase "How do I want to export that Timeline?" with all the details associated with that phase to get the best results.
Looking forward to your follow up.
Thanks.
ATR

Similar Messages

How do you import "MVI_ file # .THM" from "Canon Powershot SX1 IS" into Adobe Premiere Elements

When I tried to import a MVI_ "file #" .THM file from a "Canon Powershot SX1 IS" camera into Adobe Premiere Elements, I received the following message: "This type of file is not supported, or the required codec is not installed."
How do I resolve this issue?
Thanks for any assistance that you can provide.
John

Steve,
Thanks for your help. You are correct that there is another file with the same name without the ".THM" extension.
What I said was incorrect. I was trying to import the file without the ".THM" extension and getting the afore mentioned message.
However, I just discovered that this MVI_ file is a "Quick Time Movie" format not an "avi" format.
Do I need to convert this format or does it have something to do with a codec?
Thanks,
John

Importing Video From a Sony HVR-Z5E into Adobe Premiere CS5

Hi,
I am importing video from the Sony HVR-Z5E straight into Premiere using the capture option off the file menu but the colour looks completely different to what it looks like on the camera. Why should this be? When I preview the video in the capture window the video looks fine. its just after I have captured it.
OS: Windows 7 x64
RAM: 3 GB
Please HELP??!!??
Many Thanks

Either your camera or your monitor is not properly calibrated. Lucky for you, capturing is just a transfer of digital data without any modification at all, just like copying files from A to B. They do not change in the copy process. So either it is in the eye of the beholder or you monitor is not properly calibrated or you are just imagining things.
Wish you luck with editing HDV on such a system.

Help needed: How to import video from Canon Legria Camcorder FS306?

Dear all,
After happily purchasing Canon Legria Camcorder FS306, I realise that my IMOVIE HD could not detect the camcorder when connected to my Macbook pro.
Have 2 questions here:
1. Is it impossible for IMovie HD to detect newer camcorders? Should I then upgrade to IMOVIE09?
2. Currently, Canon Legria Camcorder FS306 is not listed as 1 of the supported camcorders for IMOVIE09. It is one of the newer models. Is IMOVIE09 able to import video from this camcorder now? Or in the near future? Or it may never be supported?
Tks!
Gam

You would need imovie 09 to use this camcorder.
This camcorder is not on the iMovie 09 supported list. However, every Canon camcorder since 2008 has supported iMovie 08 and 09, so odds are good that this one will, too. Odds are good that it works right now. IF you want to know for sure, call Canon. ....or take your camera to an Apple Store and hook it up.
It might be possible to do some manual conversions and continue to use iMovie 6. For example, you could try converting the MPEG2 files to DV using a tool like MPEG Streamclip. You would also need the $20 Apple QuickTime MPEG2 Playback Component. I find iMovie 09 to be a much better editor, but if you are comfortable with iMovie 06, this might be worth a try for you.

How do I import video from Canon Legria HF20 to iPad 2?

I have the camera connection kit, and iMovie App. The kit will import photos, but the iPad does not react at all when trying to send video files to iPad 2.
Is there a utility App for iPad that will make the file format recognisable? Or is it possible to save the camera files in a format recognised by the iPad.

Freezeframe-
Either a Thumb Drive or an SD card in the Camera Connection Kit adapter should work. However SFX is not a file type I'm familiar with.
How about [Volume name]\DCIS\[filename].[mp4]? The file name must be 8 characters plus suffix. It needs to look like it would if it had been recorded in the camera.
If that doesn't work, perhaps adding another folder will help. A card from a Canon camera has another folder named "102___12". That would make the path [Volume name]\DCIS\102___12\[filename].[mp4].
The more common way to transfer videos to the iPad is using iTunes that had previously synced with it. Select Movies under LIBRARY on the left side of the iTunes window. Then you should be able to drag the video file into that window. The video will be transfered the next time you sync. This way, the file name is not critical, as long as it has the correct suffix.
Fred

Can't import video from Canon GL-2 into new Macbook Pro

Can't import video from Canon GL-2 into new Macbook Pro
Using 9-4 pin cable and then using firewire 800 to thunderbolt adapter.

Does the MBP see the camera at all?

Importing video from a JVC HD7U camcorder into iMovie 11

I am having trouble importing video from a JVC HD7U camcorder into iMovie 11. The import screen shows up and recognizes the camera with the time counter activating but there is no image on the screen and the record or import buttons do not seem to do anything. I have followed the instructions from the manual and others found online. Someone please help. Terry

Hi Brady,
I have a new Everio HD that I have been fooling with all day. Finally got a clip into iMovie 6 ....but only once and I'm still figuring this out too.....if you are not using a HD camera this may or may not work for you.
The Everio Quicktime extension must be installed. (Download and install the patch if you upgrade to Leopard).
Is your camera an HD? If so you need to capture the clip in 1440 CDR not FHD (FullHighDef).
Launch iMovie 6. Create a new movie in Video format HDV 1080i . then plug in your camera via firewire.
Put the camera in playback mode (Play/REC), press the Function, select Dubbing Playback (bottom of the menu). You should get a menu with a start button now. Switch to iMovie 6 and select "Import". This should start the clip playing from the camera....you may have to hit the Start on the camera.
This should get your clips into i Movie.
We may be ably to create playlists and get them in that way too but I have not had any luck with the JVC instructions to do this. There are video tutorials on the JVC website too but again they have not worked for me.
There is also a way to get and work the FHD files but that is a USB file transfer followed by a file conversion. I'll tackle that a little later...
Good luck,
Roger

How to download video from Canon Legria HFR18?

I can't download videos from Canon Legria HFR18 to my Mac OS X 10.4.11. Can anyone help me?

Hi, how does it hook to the Mac?
Did you download the Software for it? ImageBrowser Updater (6.5.3)
http://software.canon-europe.com/products/0010852.asp
Did you try iMovie?

Every time I try to upload MOV files from my iphone 5s onto my adobe premiere elements on windows 8 i get 'the importer reported a generic error'

every time I try to upload MOV files from my iphone 5s onto my adobe premiere elements on windows 8 i get 'the importer reported a generic error'

jade harding
What version of Premiere Elements are you using on Windows 8.1 64 bit? For now I will assume Premiere Elements 12 in a NTSC set up.
Your iPhone 5s video is expected to be 1080p @ 30 progressive frames per second? Do you confirm that? Because of the source of your video, it is highly likely that you are dealing with a variable frame rate.
Please give the following a try to see if you then have an "importable" product to take into Premiere Elements presumed 12/12.1.
Download and install the free HandBrake program.
http://handbrake.fr/
Import your video file into the program.
Make sure you browse to and set Destination (suggested Desktop location)
Go to the Video Tab and set
Video codec = H.264 (x264)
Frame Rate = 29.97
put a dot next to Constant for the Frame Rate
Click on the Start at the top left of the workspace
Wait for the "Queue Finished" to appear in the progress bar at the bottom left of the workspace.
Then see if this H.264.mp4 (1920 x 1080 @ 29.97 progressive frames per second file can be imported into Premiere Elements 12 project with a manually set project preset of NTSC/DSLR/1080p/DLSR 1080p30@ 29.97.
Details for setting manual project preset can be found in
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
The details that I have posted in this reply are customized for Premiere Elements and should work fine for you.
We will be watching for your results.
ATR

How to get audio into Adobe Premiere Elements 12?

How to get audio into Adobe Premiere Elements 12?
I have filmed an air show with a very good camera JVC pro
And when I pick up the clips in Adobe Premiere Elements 12, it works too, but only without sound.
I think I tried everything for 4 days now.
Sound in my computer works perfectly
I go to where the video files are located and try to run them in VLC or in Nero Kwik so it works fine with both audio and video.
I have checked the sound card.
Yes, I have tried everything so now I'm so tired of this lousy so I'm ready to throw this program at the dump.
It's not normal if you will keep on producing audio for over 4 days at Adobe
The old Elements 9 worked fine. Offer some of would consider developing it again. I do not know how I should do.
My name is Thore Hult
live in Karlshamn in Sweden

Thore Hult
On what computer operating system is your Premiere Elements 12 working on? Have you updated it from 12 to 12.1 Update using an opened project's Help Menu/Update. If not, please do so.
For your immediate problem.
What is the model/settings for the JVC camera that recorded you video. I want to get at the properties of your source video including the file extension.
Since you are getting video, but no audio, please download and install the free codec utility named GSpot to see what is shows
for your Audio Name and Status.
http://www.headbands.com/gspot/
The other properties of the file there would also be of interest.
When you import your source file into the project, do you see any "conforming" activity going in a progress bar at the bottom right corner of the workspace?
If so, do you wait for it to complete before you move forward in the project?
Can you get sound in any of your Premiere Elements projects with this current JVC file or other?
Can we assume that your troubleshooting has included checking
a. Volume control within the project
b. Edit Menu/Preferences/Audio Hardware ASIO
Let us start here and then we can decide what next if necessary.
Thanks.
ATR

Can someone help with importing video from Canon XA10 (AVCHD) into PE 11?

In PE 11 when I import video from my canon xa10 (avchd) the quality is terrible, I also have a canon xa20, 60D and gopro that I video with and they all turn out with great video quality. Is there a reason why the xa10 video quality is bad? Setting I need to change?

dillonknopp
Thanks for the follow up.
In Premiere Elements 11 and 12 takes over setting the project preset based on the properties of the first file drag to the Timeline. Sometimes it does it right; sometimes not. You can check what the project has set by using the readings from Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio even if the fields look grayed out. If the project preset is set for NTSC AVCHD Full HD1080p30, then the Edit Menu/Project Settings/General should be as represented in the following screenshot
Please refer to setting the project preset yourself manually and then importing the source media into the project.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
Depending on how the current stage of troubleshooting progresses, you might want to post a screenshot
of your Expert workspace, showing the Edit area monitor display of the rendered Timeline.
We will be watching for your results.
Thank you.
ATR

Importing video from Canon DSLR into time line in Premiere elements 10

When I import video from the media files in premiere elements 10 on to the Time line,I get a message saying that the video is not a suitable format and do I want to change it to a suitable format or leave it as it is.If I go to change it then the video does not display on the editing monitor. How do I get round this?

You're right it should work .... but in practice not always.
You have the latest and greatest mac laptop but your camcorder is frankly a bit dated. So my suggestion is to give it the signal that it wants.
You might want to try this little puppy:
http://www.newegg.com/Product/Product.aspx?Item=N82E16812191015&nmmc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Adaptersand+gender+changers-_-SIIG+Inc--12191015
along with a standard 6 pin to 4 pin FW 400 cable. It might be choking on the faster FW 800. This is just a guess though.

Can't import video from Canon ZR50

Hi,
I'm having (a LOT) of trouble importing video from my DV camcorder (a Canon ZR50) into iMovie. I used to do this all the time (using this camcorder) with no problems whatsoever, but I haven't imported any video for a couple of years.
First, I got the error message that the camcorder was sending "half-frames" that iMovie couldn't accept and to change the recording speed to SP.
I changed the recording speed to SP, but still got the same error message. So, I then uplugged everything, restarted the computer, took the battery and the emergency battery out of the camcorder, waited five minutes, replaced the batteries, reset the date/time/recording speed (to SP), plugged the firewire back in, and got the same error message.
I then decided to go boot up my ancient blue dalmation iMac that I used to edit video on, and although iMovie said the camcorder was connected, when I hit either "play" or "import," even though the video would play on the camcorder, it wouldn't show up in iMovie.
PLEASE help me get my video onto the computer!!!
Thanks so much,
Sierra

Does the MBP see the camera at all?

Import video from canon eos 550d

What settings should be FCP7 to successfully import .mov from Canon eos 550d?
I would like video without the noise and recoil.
Tnx

550...that's the T2i, right? Downloading the EOS Log and Transfer plugin, and hacking it, is one way:
http://lfhd.net/2010/04/04/log-and-transfer-for-canon-dslrs/
Magic Bullet Grinder to convert to ProRes is another:
http://www.redgiantsoftware.com/products/all/magic-bullet-grinder/
Or Compressor.
No matter what, you need to convert the footage to ProRes for editing:
#51 - Canon 5D MkII / Canon 7D footage into FCP
Shane's Stock Answer #51 - how do you bring in footage from the Canon 5D and 7D cameras into FCP to edit?
You need to convert all of the Canon 5D MkII footage from the H.264 format that it records, to ProRes 422 (ProRes HQ is unnecessary...no quality difference) Yes, the file sizes get drastically larger. H.264 is an acquisition and delivery format, not an editing one.
You can use the Canon EOS Log and Transfer plugin that works with the 1D, 5D and 7D cameras. This plugin is great because it brings in the camera's TIME OF DAY as timecode, instead of starting each clip at 00:00:00:00 like Compressor or other conversion software will do.
CANON
Here is a tutorial on how to use it:
Editblog tutorial

Importing video from canon zr950

i can't import video from from canon zr950 as my macbook does not have a firewire port and the usb port does not recognize video camera. any other alternatives to importing the video from mini dv?

You really do need a firewire port on your computer to import DV.
One option would be to call the store manager of a nearby Apple Store, and politely ask if you can come in and use one of his computers that has firewire to capture your movie.
If your camcorder has a feature that let's you play it on TV through RCA cables (Red, White, and Yellow) or S-Video cable, then it is possible that you could capture using the ElGato EyeTV Hybrid. However, I have not tested this, and I would hesitate to tell you to spend $100+ if I am not sure. I may have time to test it next year some time. Even if it works, it will not be at the quality of the original DV. Would the quality difference by visible? That is another thing to test.

Import video from CANON LEGRIA HF R18 into adobe premiere elements

Similar Messages

Maybe you are looking for