Import VM without export

If we did not do the export VM，is it possble for us to import it to the new host?
for exmaple, the host is down without any backup. Could we import vhd to new host by specifing the vhd location directly?

If you can locate the VM, you can register this VM onto a new host - as long as the host has required access to the storage where the VM remain.
But yes, since Windows Server 2012, Hyper-V can import VMs natively, without looking for the .exp file (which was required as part of the export process in 2008/R2).
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Similar Messages

Converting RAW masters to jpgs without exporting, deleting and importing...

Is there a way to convert my RAW files that I already imported into Aperture libraries, now into JPGS without exporting versions, then deleting the RAW-master originals and then importing the jpgs again? I would like to save some disk space, after having chosen some RAW files to keep and now wanting to downconvert the rest to jpgs. Thanks for the answers!!

No, there is not, for the reason Ernie stated. Although I find the "library" metaphor ill-selected, it may help illustrate the point. You RAW files should be thought of as First Edition Hard-cover books. JPGs derived from the RAW originals are later editions. Some of them may closely simulate the first edition; some may be cheap paperbacks designed to be read once and discarded -- none of them is a First Edition.
What you want to do is somewhat tantamount to carting all the precious First Editions out and leaving them by them curb, and replacing them with smaller, lighter paperbacks.
You can do this, but Aperture makes sure you actually have to do the lifting and the carting.
If all you want is a Bookmobile, Aperture is not a good vehicle.
Fwiw, the User Manual recommends creating additional Libraries when you Library becomes too large. (I was 100% certain the User Manual recommended converting some Image's Masters from Managed to Referenced when your Library file became too large, but today I can no longer find the reference.) IME, you are much better served having one Library with your Image's Masters Referenced than having multiple Libraries.
Message was edited by: Kirby Krieger

Can I duplicate a RAW image as a JEPG without exporting then importing?

I would like to duplicate a RAW image as a JPEG. Is this possible to accomplish within the Aperture library without exporting then importing?

No, it is not.
"RAW" describes a family of proprietary sensor-data file formats. If you want a JPG file, you must create it. "Export", in Aperture, means "Make me a file of this Image according to these settings in this Image Export Preset". You make JPG files by exporting Images and selecting JPG (and other settings) in the Image Export Preset.
If you supply some more information on what you are trying to do, we might be able to help you. You question comes up often from users trying to do something larger, but I can't tell what from the information you've given.

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

Import data without opening explorer built in Import visual button

Hi
How can I Import data without opening explorer. If I add Import button visual and click on it automatically opens explorer to chose exported file. But I already know location and name of exported file so I don't want that explorer to appear.
How can I do it?
Thanks

Hi I was thinking
What about to have code for importing and exporting. for example:
Import(DataName, location)
Import(Collection1, "C:\User\Documents\Data\dataname")
Export(DataName, location)
Export(Collection1, "C:\User\Documents\Data\dataname")
With this code we could easily add it into timerEnd behaviour and we could make automatic backup files
Or
We could add this into save button where we do editing of our collection and save it straight to backup file
We could have the location and data name saved in local machine and call them in that import export code. This is exactly what I need if I want that data to be shared between multiple devices where all the data would be stored on server or
shared folder
And also for better user interface there should be a location picker (button visual) what would open explorer where we could chose the location instead of writing it down into an inputtext
What do you thing about this? Would this work?

Embedding IPTC Metadata without Exporting

Does anyone know of a way to write the IPTC data (keywords, descriptions, etc) to the actual file without exporting from Aperture. The problem with exporting is that I have about 20,000 photos, all with keywords, scattered around many folders. If I export, I either need to export one folder at a time (there are hundreds) to preserve the project/folder structure or I need to export them all and loose the folder structure.
Am I correct about this assumption?
Any suggestions for how to either preserve the structure during an export or change the IPTC information in the original file without exporting?
Will synching up to Flickr write the metadata to the file?

goodquestions wrote:
Does anyone know of a way to write the IPTC data (keywords, descriptions, etc) to the actual file without exporting from Aperture.
yes. use the metadata inspector>IPTC-Expanded. select the photo and input the information into it.
you can also select at the bottom of the metadata inspector "IPTC" make sure "Hide Empty Tags" is deselected and check the ones you want to see on your list. if you don't see what you want in the list you can also make your own
EDIT: you can also rearrange the order of the items listed by dragging them up or down
or download the different protocol lists from
http://www.iptc.org/cms/site/index.html?channel=CH0086
and import them into aperture
The problem with exporting is that I have about 20,000 photos, all with keywords, scattered around many folders. If I export, I either need to export one folder at a time (there are hundreds) to preserve the project/folder structure or I need to export them all and loose the folder structure.
Am I correct about this assumption?
you can always do a query search in your library and export the group of photos according to the search input to it's own folder (you can make at export). for example, city, byline, into a folder
Any suggestions for how to either preserve the structure during an export or change the IPTC information in the original file without exporting?
see above or when exporting select "edit" and "Include Metadata" this will export your IPTC info with the photo
Will synching up to Flickr write the metadata to the file?
not sure but there is a buggy plugin for this (hasn't worked for me):
http://www.flickr.com/tools/aperture
victor
Message was edited by: victor maldonado

Import photos without copying? I Have thousands of photos on a hard drive separate from my mac and i dont have enough space on my mac to copy them to. Any way to import without copying to the local hard drive?

Import photos without copying? I Have thousands of photos on a hard drive separate from my mac and i dont have enough space on my mac to copy them to. Any way to import without copying to the local hard drive?

Yes, but you might want to think carefully about it.
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing. The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
This is an attractive option for some users at face value, but it contains a significant number of issues that you might want to consider before making the decision to run a Referenced Library
How to do it:
iPhoto -> Preferences -> Advanced and uncheck the box at 'Copy items to the iPhoto Library'
Now when you import iPhoto makes an alias in the Library Package that points to the stored file. Note: iPhoto still creates a thumbnail of the image and it makes a Preview of edited photos inside the Library Package.
Issues?
1. You are responsible for file management. That's more work:
You must first move the files from your camera to the storage location before importing.
If you want to delete files then you must first trash them from iPhoto and then afterwards find them in your storage and trash them.
Thereafter, you cannot move the files on early versions of iPhoto at all, on iPhoto 08 and later you may move them on the same Volume or Disk. If you move them to a new volume or disk the aliases my break. If they are on an different volume and you move them the aliases will break.
You cannot rename the files.
Migrating: moving to a new machine, moving the files to another disk are all a lot more complex.
2. You gain no extra functionality from running a Referenced Library. Nothing. This is just storage. You still manage the files via iPhoto. You edit them with iPhoto or via iPhoto's External Editor setting, otherwise you're changes will not be available in iPhoto. You don't save byte of storage space.
3. If you have the Library on one volume and the photos on another you if anything changes in the path to a file (Like if you upgrade your machine, move the files on the NAS or on to another one?) then the alias will break, and you'll have to repair it manually. For every photo in the Library. One at a time.
Why do you want to run a Referenced Library?
Because my photos won't fit on my HD?
You can run a Managed library from an external disk. Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
You're worried about accessing the files?
There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Help required to manipulate the data without exporting the output twice

I am running a script which export the data to CSV file and I re-import the same file to remove the duplicate rows and them export them.
Need to clean the up the first file after the script execution
Is it possible to store the data in an object without export and import for manipulating the data
&{foreach($role in Get-VIRole){
Get-VIPrivilege -Role $role -ErrorAction SilentlyContinue |
Select @{N="Role";E={$role.Name}},@{N="Assigned Privileges";E={$_.ID}}
}} | Export-Csv C:\Scripts\Permission.CSV -NoTypeInformation -UseCulture
&{foreach($row in (Import-Csv C:\Scripts\Permission.CSV -UseCulture)){
if($prevRole -and $row.Role -eq $prevRole){
$role = ""
Else{
$role = $prevRole = $row.Role
New-Object PSObject -Property @{
Role = $role
"Assigned privileges" = $row."Assigned Privileges"
}} | Select "Role","Assigned Privileges" | Export-CSV

If I understand the question correctly, I think this might work.
$ht = @{}
foreach($role in Get-VIRole){
Get-VIPrivilege -Role $role -ErrorAction SilentlyContinue |
foreach { $ht[$role.name] = $_.ID }
$ht.GetEnumerator() |
foreach {
New-Object PSObject -Property @{Role=$_.name;'Assigned Privileges' = $_.value}
} | export-csv
That uses a hash table to de-dupe the role/assignment pairs and then builds the objects for export from the hash table.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Resizing images without export

Hi all,
I would like to create a folder that contains re-sized versions of my master images. The folder will be photos that I am posting to my web site and I want to be able to control their size and keep this resized image in my aperture library. I am uploading them through the site host's uploader (squarespace) using finder, not exporting through aperture. Is there a way to create duplicate,resized versions of the images without exporting and re-importing the photos?
I know that aperture isn't photo editing software, but i expected that it would be able to do basic things (mirror, resize, etc) and am constantly disappointed. I could round-trip to photoshop, but I hope there's an easier solution.
Thanks,
John

First question - why do you need the JPEGs? If it's to upload them to a site via FTP there are export plug-ins to do this directly from within Aperture.
Using the media browser isn't going to help you at all because that will be accessing Previews in Adobe98 profile - not something you should be putting up on a website.
I also came across this problem when I wanted to convert a large number of raw files to jpegs and keep the new jpegs in my library. At the time I was running low on disk space and didn't need the raws anymore, but had to go through the process of exporting and re-importing for a bunch of projects.
Sorry, but that's a bit too alien an idea for me - I never threw away negatives back when I was using film, why would you throw away RAW files now?
Another pet peeve I have is that there is no status indicator when exporting (2 minutes left, 25% done, etc....anything besides a beachball), so I don't know how long the export will take, and on my 2006 macbook it sometimes takes a while.
At the bottom of the Browser pane on the left you will see a progress 'swirl' when exporting, importing or generating Previews. Click on it to bring up the activity window with progress bars for all current actions. You can also access it through Window>Show Activity.
Ian

Import Statement without ID Specification

There is an import statement
IMPORT tab g_acc_tab FROM MEMORY.
While UCChecking it.. it saying that
import statement without id specification is only used for the sake of r/2 ......
Can i Comment it ? If so won't my application go into dump while running on 6.0cc???

It has to do with packages. Most java classes are in a package, the name of which must conform to its place on the filesystem relative to the classpath. By that I mean that if you have com.mystuff.One.java, it must be in a folder com/mystuff where com is located somewhere in the classpath.
What you've done is a little different. I'm assuming a couple of things:
1. you have no package declaration at the top of one.java or two.java
2. you have the current directory "." in your classpath.
Java has the concept of the "default package", which covers classes without a declared package, and in your case is the current directory.
So when you're in c:\sourcefolder and run the compiler, then "."="c:\sourcefolder", and that directory is part of the default package. No import statements are necessary for classes that are in the same package. This is why two.java can call methods in one.java without an import statement.
When you run your jsp, the "current directory" part of your classpath is not c:\sourcefolder, but some other value (probably the directory you start your jsp engine from) You will have to import all non-java-library classes because the jsp itself becomes a java class, with a package that is determined by the jsp engine.

Is there any way to merge 2 video layers to one without exporting?

Is there any way to merge 2 video layers into one without exporting as a new QuickTime movie? I have tried opening a blank player to copy and paste into, but it always forces it to be layered, even when I change the layer numbers both to zero. I tried extracting the video layers and omitting the audio tracks. Then I saved it as a new self contained movie. I am trying to burn the video to dvd with Roxio Easy Media Creator 9's MyDVD on WIndows XP, but I am also using a MacBook with QuickTime Pro. MyDVD will only recognize one video and audio layer at a time, hence, the other layers get skipped. There should be an easy way to merge two video layers without having to export it as a new movie, which takes 2 hours for this 2 hour TV show. Thanks for any answers.

Just closing this topic.

Phase import abap (problem in the import of the export)

Hello!:
We are doing the IMPORT of the EXPORT (for the CU&UC), and has appears the next error in the IMPORT ABAP PHASE:
(GSI) INFO: vname = "MSSQL "
(GSI) INFO: hostname = "IBA3SAP\MIG "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "IBA3SAP"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "2x IA64 Level 31 (Mod 1 Step 5)"
(DB) INFO: ACCTIT created
(DB) INFO: ACCTIT~0 created
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: ACCTIT~1 created
(DB) INFO: disconnected from DB
M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe: job finished with 1 error(s)
M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe: END OF LOG: 20080409193447
Can you help me?
Thanks and regards,
Alfredo.

IMPORT_MONITOR.LOG
ERROR: 2008-04-09 19:34:48 com.sap.inst.migmon.LoadTask run
Loading of 'ACCTIT' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i ACCTIT.cmd -dbcodepage 4103 -l ACCTIT.log -loadprocedure fast' exited with return code 2.
For mode details see 'ACCTIT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-04-09 19:53:03 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1_34' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i SAPAPPL1_34.cmd -dbcodepage 4103 -l SAPAPPL1_34.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL1_34.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-04-09 22:08:11 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1_67' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i SAPAPPL1_67.cmd -dbcodepage 4103 -l SAPAPPL1_67.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL1_67.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-04-10 08:22:35 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0_17' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i SAPAPPL0_17.cmd -dbcodepage 4103 -l SAPAPPL0_17.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL0_17.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

Import Process without excise

Dear Friends,
Pl explain the detail for Import process without Excise. what are the condition types has to be maintained .
Thanks

>
umesh sahoo wrote:
> Dear Friends,
>
> Pl explain the detail for Import process without Excise. what are the condition types has to be maintained .
>
> Thanks
Steps are
1. Create material master with valuation type import duty free
2. Create vendor master for foreign currency with schema group for imports
3. Create info record(default valuation type as IMP-DF)
Note :
Maintain exchange rate for "EUR" currency for exchange rate type EURX.
Maintain exchange rate for required currency in exchange rate table using OB08
4. Create import purchase order with exchange rate for currency.
5. Usual condition types as import but no duties to capture.
6. Pay freight or landing charges using FI vendor invoice using FB60.
7. No need to do commerical invoice(MIRO) for paying customs duties
8. Do migo,system will prompt for commerical inv. no. & year,Keep it blank do n't enter anything.
9. In excise tab of migo,select no excise entry.
10. In MIRO,Do vendor invoice.

Problem with importing a java export on SQLSERVER 2005

We are trying to import a java export for a system refresh.   The SAPINSTgets too step 31 of 32, run java migration toolkit, and then fails with the following error.
invalid object name "J2EE_CONFIG"   This is showing up in the runJmt.log.
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/dispatcher,
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108)
     at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748)
     at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
     at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
     at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54)
     at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getDispatcherIds(ClusterDataImpl.java:91)
     at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:172)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: [NWMss][SQLServer JDBC Driver][SQLServer]Invalid object name 'J2EE_CONFIG'.
     at com.sap.nwmss.jdbc.base.BaseExceptions.createException(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.SQLServerImplStatement.getNextResultType(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseStatement.commonTransitionToState(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseStatement.postImplExecute(Unknown Source)
     at com.sap.nwmss.jdbc.base.BasePreparedStatement.postImplExecute(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseStatement.executeQueryInternal(Unknown Source)
     at com.sap.nwmss.jdbc.base.BasePreparedStatement.executeQuery(Unknown Source)
     at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeQuery(BasicPreparedStatement.java:97)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:281)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:248)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.getConfiguration(DBAccessDefault.java:578)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:102)
     ... 17 more
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/dispatcher,
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108)
     at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748)
     at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
     at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
     at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54)
     at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getDispatcherIds(ClusterDataImpl.java:91)
     at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:172)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: [NWMss][SQLServer JDBC Driver][SQLServer]Invalid object name 'J2EE_CONFIG'.
     at com.sap.nwmss.jdbc.base.BaseExceptions.createException(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.SQLServerImplStatement.getNextResultType(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseStatement.commonTransitionToState(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseStatement.postImplExecute(Unknown Source)
     at com.sap.nwmss.jdbc.base.BasePreparedStatement.postImplExecute(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseStatement.executeQueryInternal(Unknown Source)
     at com.sap.nwmss.jdbc.base.BasePreparedStatement.executeQuery(Unknown Source)
     at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeQuery(BasicPreparedStatement.java:97)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:281)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:248)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.getConfiguration(DBAccessDefault.java:578)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:102)
     ... 17 more
Error executing Migration Tool Import
java.lang.IllegalArgumentException
     at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createBoxNumberMapping(ClusterDataImpl.java:137)
     at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:172)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)

Hi David,
since I experiencing the same problem like you did, I'm interested what do you mean by "SQLSERVER script for system refreshes".
I was searching around but didn't find anything close to this?!
Can you please help?
Tnx.
Kind regrads,
Samo

Can you edit a pdf document without exporting it into a word document?

Can you edit a pdf document without exporting it into a word document?

Hi sylvias99766822,
You can if you have Acrobat. If you don't, feel free to give it a try. You can download a 30-day trial from http://www.adobe.com/products/acrobat.html.
Keep in mind, though, that Acrobat isn't intended to be a word processor. So, while you can make adjustments to text and graphics, if you need to do a major overhaul of the text in the document, it's best to go back to the source document and edit the content there.
Best,
Sara

Import VM without export

Similar Messages

Maybe you are looking for