Import vs. Copy & Paste

When I copy and paste a image such as [url=http://appliancejunk.com/imgs/logo.png]the logo from our site[/url] into fireworks it's background ends up being black instead of a transparent background.
When I import the same logo into fireworks the background remands transparent.
Why does the background turn black when I copy & paste the logo into fireworks CS5?

Thanks for the reply.
I tried to drop and drag from a few different browsers after reading your reply.
This is what I found.
FireFox 3.6.10 lets me drag and drop, but does not keep the transparent background.
IE 8 does not let me drop and drag into Fireworks CS5
Safari lets me drag and drop into Fireworks and it keeps the transparent background.
Google Chrome lets me drag and drop into Fireworks CS5, but the resaults are just odd. No image, but there seems to be something that got dragged over. I just can't make out what it is.
If it makes any difference I'm running win 7 64 bit system.

Similar Messages

Update pages in form by import then copy/paste

I have inherited a dynamic interactive PDF. Essentially what they did was take multiple pdfs and put them in one, visually shown below.
form1.pdf, 1 page-----
|
form2.pdf, 2 pages----
|---------> formall.pdf
form3.pdf, 4 pages----
|
form4.pdf, 3 pages----
|
etc...----------------
Well now they have made massive changes to form2.pdf and form4.pdf and I am supposed to update formall.pdf.
Is there any way to pull NewForm2.pdf into the existing formall.pdf, and then copy/paste the fields from the current form2 in formall.pdf onto the new one, then delete the old form2 pages?
The changes in NewForm2 are extensive and it would take quite a while to just redo form2 inside formall.
I do not think they thought about updates when they created formall.pdf. I would like to separate the forms and use something like Forms Server, or even add each form into a library where I could add the new version and create a new formall, but I do not have time.
The only tools I have are LiveCycle Designer 7 and Adobe Reader 7.05. I do NOT have Acrobat.
I have seen several posts about inserting pdfs from Designer into Acrobat to update, but not inserting pdfs into Designer to update.
I tried importing NewForm2.pdf into Designer with formall.pdf already open, but it always creates a completely new form.
Thanks

I exported a PDF from Pages v5.2.2. This uses Apple's Quartz PDFContext, not Quark.
In Windows 7, I opened this PDF with Adobe Acrobat Reader v11.0.09. I then copied/pasted a paragraph of this PDF content into LibreOffice Writer (v4.3.2.2). Since there was Baskerville in Windows 7, this comment pasted correctly including font-size. I did not have to make any adjustments to LO to accept this text.
On Ubuntu Linux 14.04, with the latest updates, I opened the same PDF in Evince, the default PDF viewer. Adobe does not offer an Acrobat Reader download for Linux. Again, I copied and pasted a paragraph of content from the PDF viewer into LibreOffice Writer. As there was no Baskerville installed, Writer defaulted to the Liberation font, at the correct point size.
In either of these platform scenarios, there were no anomalies with sentence/paragraph newlines .vs. carriage return issues from the PDF document during copy/paste operations. These were default control-v pastes that did not use the Paste Special menu item in LibreOffice.

Fireworks idea: Copy / Paste Pages

This would be my #1 priority request for the next version of Fireworks.
There needs to be a way to copy / paste Pages (from the Pages panel).
For a given project, I work with several different Fireworks files that make up a complete set of UX concepts for an app or website.
Often times I need to recreate the exact same looking pages in different Fireworks files.
Since there is no way to just export/import or copy/paste pages, I have to manually copy the graphics. The thing that makes this monotonous is keeping the integrity of your layers - and the only way to do that is by copying one layer over one at a time.
Please make an easy way to copy / paste entire Fireworks pages across multiple documents !!
Thanks.

You wouldn't need to go inside a symbol for each of your pages because there would be just one page per symbol. Drag and drop instead of copy and paste. It's not the solution you are looking for, but it would work. Here's a link to the Adobe wish form. https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Project duplication: Copy/Paste vs. Export/Import

Anyone have any thoughts on project duplication?
Presently I am copying a project and then pasting it into multiple new locations then renaming them. Recently I was in a training session where the instructor suggested exporting the project and then importing it claiming database size savings. Can anyone shed any insight?
Thanks in advance.

I can't imagine why an export/import would be a smaller footprint within the database than a project copy/paste. Not to mention that if you are talking about a relatively large project it can take a substantial amount of time to export and import. One of our schedules that is about 18k activities takes approximately 1.5 hours to export/import where as a project copy/paste only takes about 10 minutes. Note that we do not copy the baseline schedules when replicating projects.

How to import multiple XML files into one inDesign document without copy/paste ?

I use InDesign CS6, and I have several XML files with the same structure. Only the data are different.
I created an Indesign layout with some tagged placeholder frames on merge mode, for automated layout.
Today for each XML file I have to create a new InDesign document to import the XML. Everything works fine. Then in order to have all Indesign layouts one after the other into a single Indesign layout, I have to use the copy/paste function.
I mean for example, copy the contents of all documents to the first one. Or add pages of other documents to the first one, then delete spaces between each page.
So my question is the following:
How to repeat this process without copy/paste function, knowing that the
number of XML files could be unknown.
Thank you very much for your answer.

Yes, effectively I would like to catalogue the files into one collection so i can save as one PDF and Print as one.:)
I know I could save each AI as a pdf them then merge the pdf's together in acrobat, but I have nearly 100 files so would feel more comfortable seeing them all together before print / saving.
My concern is that if I insert them in Ai, will the file resolution reduce? and will the ai still be editable and would it update the indesign file?
Thanks for the quick reply

I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

You seem to be new to this software, so I highly recommend that you take some time to learn it using some great tutorials available online - it will pay off to invest the time, if you follow through, for example the great (and free) introductory tutorial at izzyvideo.com.
This is an amazing piece of software, and you'll have a lot to learn, but it's well worth it.

OpenScript: 1. How to move the scripts from one location to another location. in OpenScript; Copy, paste or Import, export

How to move the scripts from one location to another location. Copy, paste or Import, export

Both way you can do.. Difference is - if you copy paste to another folder script dependencies will not move with the same( ie Assets added), whereas if you export and import the script all dependencies will be correlated automatically

How to import style from mx.DataGrid into my DataGridExt (copy-paste from mx.DataGrid)

Ok, I managed to create the DataGridExt (copy-paste from mx.DataGrid). Don't ask me why I did this, it's a long story believe me.
But it is styleless. There's no skin set and that is what I expected.
The thing is, is there a nice/magical way to tell the DataGrid skin to be applied to DataGridExt?
Thanks for attention.

In case the question was not clear:
Is there a way to have all styles of mx.DataGrid applied to my custom control called DataGridExt?

Are SMS forwarding/Editing and Text Copy Paste functions supported in Firefox OS?

Could not find any options to forward SMS or edit text messages, neither could find any options to copy paste general text. Most importantly, in the number dial pad, the cursor can't be moved to the desired location to add digits. Am I wrong? If so how do I go about these things?

Hello,
Thanks for reaching out to us! Unfortunately it is not possible to forward SMS messages. I'm not sure what you mean by editing text messages. As well as, could you elaborate on what you are looking for to be done with the dial pad?

Can i remap a button on the keyboard? (trying to support copy/paste on mac)

my app runs cross-platform, and on the mac os x, copy/pasting is accomplished via ctrl+c/v, when the native os wants to use cmd-c/v. (ie in order to copy from a browser and paste into my java app, the user would have to press cmd-c to copy from the mac environment and then ctrl-v to paste into the java environment.)
i'd like to have copy/paste behave the way mac users are expecting (pressing cmd vice ctrl). at the moment, my app supports OS functions like cmd-w (close window), cmd-q (quit), and cmd-h (hide) via a few import classes from apple. they neglect to provide the same support for copy/pasting.
so. how can i init my java environment so that if a user presses the cmd key, java behaves as if they are pressing the ctrl key?
thanks!

ok, tested it. seems that under metal and the L&F i'm using (which is based on metal as far as i know), pasting is accomplished via ctrl-v.
if i set the L&F to the system L&F while running in a mac os, pasting is accomplished via cmd-c (meta-c?).
so that's that.
i asked google for help with the shortcutKeyMask, and this turned up on an apple site:
Accelerators (Keyboard Shortcuts)
Do not set menu item accelerators with an explicit javax.swing.KeyStroke specification. Modifier keys vary from platform to platform. Instead, use java.awt.Tookit.getMenuShortcutKeyMask to ask the system for the appropriate key rather than defining it yourself.
When calling this method, the current platform�s Toolkit implementation returns the proper mask for you. This single call checks for the current platform and then guesses which key is correct. In the case of adding a Copy item to a menu, using getMenuShortcutKeyMask means that you can replace the complexity of �The Contents of an Application Bundle� with the simplicity of Listing 2.
Listing 1 Explicitly setting accelerators based on the host platform
JMenuItem jmi = new JMenuItem("Copy");
    String vers = System.getProperty("os.name").toLowerCase();
    if (s.indexOf("windows") != -1) {
       jmi.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_C, Event.CTRL_MASK));
    } else if (s.indexOf("mac") != -1) {
       jmi.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_C, Event.META_MASK));
Listing 2 Using getMenuShortcutKeyMask to set modifier keys
JMenuItem jmi = new JMenuItem("Copy");
jmi.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_C,
    Toolkit.getDefaultToolkit().getMenuShortcutKeyMask()));
The default modifier key in Mac OS X is the Command key. There may be additional modifier keys like Shift, Option, or Control, but the Command key is the primary key that alerts an application that a command, not regular input follows. Note that not all platforms provide this consistency in user interface behavior. When assigning keyboard shortcuts to items for menu items, make sure that you are not overriding any of the keyboard commands Macintosh users are accustomed to. See Apple Human Interface Guidelines for the definitive list of the most common and reserved keyboard shortcuts (keyboard equivalents).
okay... but uh... i don't quite get it. seems that this Listing 2 solution might work, but a) this is for a menu and b) i'd like this to be a global setting if at all possible. my concern is when i use something like this:
JOptionPane.showInputDialog(jframe,
                                          "please enter some text",
                                          "input dialog",
                                          JOptionPane.OK_OPTION);i want this to be paste-able too!
thanks!

Feature Request: Disable target tabs setting destination for copy paste

It might have seemed like a good idea at the time but pasting to the targeted layer causes way more problems than it solves. If for instance if I have 10 video tracks which is quite common and wanted to copy and paste a clip to track 10, I have to turn off the target buttons on all 9 tracks below to do that. I do know about option drag which works but sometimes if you're zoomed out you can't get a hold of the clip you are trying to copy. Also I may need one of those layers to help me copy to the right time but now next edit function doesn't stop on them anymore.
What is important is being able to select which tracks you want PPro to stop at when you hit the next edit keys. For instance if I'm doing a color pass I don't want to stop on audio edits or gfx edits. So If I go through that whole process of turning these things off just to clone a clip I then have to turn them all back on. IMO it doesn't make sense to share these two functions with the target buttons and it's just too tedious in the first place to use the target buttons to set paste destination.
What I think would make sense would be an option that says copy paste follows target selection or copy paste to same layer. Then the target buttons would mainly effect which media in your timeline you want to focus on which is way more important IMO. This could also be done with an extra keyboard function. IE paste to same track or paste to targeted track and have both functions available.
Also I think you should have the option of stopping on the ins and outs with the next edit buttons. It's very common to use an in or out as a quick marker for a point in the timeline where there isn't an edit yet.

Yes I know about alt dragging. Not so great to copy a one second clip in an hour long seq way down. That's the point of it. As it is now it will likely copy to a different track then you want it to so you have to go over and start clicking all kinds of buttons to get the thing to not over write something and maybe / probably all off or all on for the target buttons is nothing close to what you need and you had the buttons how you wanted in the first place. And after you paste you have to click more buttons to set that up again.
So for one: this method of targeted copy / paste is not efficient at all, and two: sharing two totally different functions for the target buttons is not a good idea. A very simple fix is to provide the option of copy / paste to same tracks.
This is an opportunity to do it better than FCP because FCP would copy and paste to the same tracks but it had very bad control over which edits the program stopped on using the next / prev edit keys. It's much more efficient to only stop on the video edits and usually one or two tracks when doing a color pass. In FCP you had to disable the audio tracks to get it to ignore them so that you're not pushing the up and down buttons 5 times more than necessary but then you couldn't hear the audio. When you're doing color you want to hit the button once and be on the next shot. With my suggestion you get to focus on exactly what you want and copy / paste isn't a button-fest. This is like golf. Fewer strokes wins!

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values?

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

Copy & Paste an Address in Mac Mail

How do you copy & paste an address in a mail draft?
I've tried everything including cntrl C but nothing. Coming from Windows, Mac mail has a lot to be desired!

No, that's the way I've tried it & no luck. Again, the copy & paste works normally in all other apps BUT mail. It will not let me copy & paste an address from a previous incoming mail & then paste that address in a mail draft to send out.
This is important in my biz - I was hoping Apple could respond & fix this - no one else here has this problem with copying mail address & pasting it in a mail draft?

Extract All Embedded Files in All Folders and Save Each? Copy/Paste from PDF to Word?

I have most of what I need here, but I’m missing 2 important pieces.
#1) I want to copy/paste from all PDF files in a folder and paste the copied data into a single Word file.
It works fine if I have ONLY Word docs in my folder. When I have PDF files and Word files, the contents of the Word files are copied in fine, but the contents of the PDF files seem to come in as Chinese, and there is no Chinese in
the PDF, so I have no idea where that’s coming from.
#2) I want to extract all embedded files (in all my Word files) and save the extracted/opened file into the folder. Some embedded files are PDFs and some are Excel files.
Here the code that I’m working with now.
Sub Foo()
Dim i As Long
Dim MyName As String, MyPath As String
Application.ScreenUpdating = False
Documents.Add
MyPath = "C:\Users\001\Desktop\Test\" ' <= change this as necessary
MyName = Dir$(MyPath & "*.*") ' not *.* if you just want doc files
On Error Resume Next
Do While MyName <> ""
If InStr(MyName, "~") = 0 Then
Selection.InsertFile _
FileName:="""" & MyPath & MyName & """", _
ConfirmConversions:=False, Link:=False, _
Attachment:=False
Dim Myshape As InlineShape
Dim IndexCount As Integer
IndexCount = 1
For Each Myshape In ActiveDocument.InlineShapes
If Myshape.AlternativeText = PDFname Then
ActiveDocument.InlineShapes(IndexCount).OLEFormat.Activate
End If
IndexCount = IndexCount + 1
Next
Selection.InsertBreak Type:=wdPageBreak
End If
On Error Resume Next
Debug.Print MyName
MyName = Dir ' gets the next doc file in the directory
Loop
End Sub
If this has to be done using 2 Macros, that’s fine.
If I can do it in 1, that’s great too.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Hi ryguy72,
>>When I have PDF files and Word files, the contents of the Word files are copied in fine, but the contents of the PDF files seem to come in as Chinese, and there is no Chinese in the PDF, so I have no idea where that’s coming from.<<
Based on the code, you were insert the file via the code Selection.InsertFile. I am trying to reproduce this issue however failed. I suggest that you insert the PDF file manually to see whether this issue relative to the specific file. You can insert PDF
file via Insert->Text->Object->Text from file.
If this issue also could reproduced manually, I would suggest that you reopen a new thread in forum to narrow down whether this issue relative to the specific PDF file or Word application.
>> I want to extract all embedded files (in all my Word files) and save the extracted/opened file into the folder. Some embedded files are PDFs and some are Excel files.<<
We can save the embedded spreadsheet via Excel object model. Here is an example that check the whether the inlineshape is an embedded workbook and save it to the disk for you reference:
If Application.ActiveDocument.InlineShapes(1).OLEFormat.ClassType = "Excel.Sheet.12" Then
Application.ActiveDocument.InlineShapes(1).OLEFormat.DoVerb xlPrimary
Application.ActiveDocument.InlineShapes(1).OLEFormat.Object.SaveAs "C:\workbook1.xlsx"
Application.ActiveDocument.InlineShapes(1).OLEFormat.Object.Close
End If
And since the Word object model doesn't provide API to save the embedded PDF, I would suggest that you get more effective response from PDF support forum to see whether it supports automation. If yes, we can export the PDF as embedded spreadsheet like code
absolve.
Hope it is helpful.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problems doing copy/paste from Flash to Illustrator

This is a problem I've had since Flash 8: when doing a
copy/paste from Flash to Illustrator (on Windows), there's extreme
degradation of the artwork, sometimes to the extent that no actual
art is even copied. All the curves seem to be approximated with
straight line segments, but at some point it just seems to give up
even trying, leaving an unidentifiable blob for most of the object.
As I said, sometimes it doesn't even copy anything at all -- all
that shows up after pasting into Illustrator is an empty group.
The weird thing is that this process worked fine in Flash MX
2004. What could possibly have changed? I was sure with CS3 it
would be fixed, but it wasn't. I haven't tried Illustrator CS4 yet,
but copying from Flash CS4 to Illustrator CS3 produces the same
problem.
I've seen a few other reports of this problem in other
forums, but I've encountered it on every install of Flash and
Illustrator I've tried (admittedly, all Windows machines, but three
or four different ones, both XP or Vista). Can anyone here confirm
that this problem exists or doesn't exist on their computer? To
test it, create a piece of art with plenty of curves and several
colors in Flash, then copy and paste it into an illustrator
document.
If this problem is as widespread as my experience seems to
indicate it is, why hasn't it been fixed in two major revisions of
the software? Is Adobe even aware of it? If not, how can I let them
know? I'm getting majorly sick of having to deal with it.
Illustrator used to be a much larger part of my animation process,
but now I can't use it how I really want to because of the bad copy
and paste functionality.
-David

Hi,
The integration between Flash CS3 and Illustrator means you
can copy objects from Illustrator to Flash and i think if you copy
from Flash to illustrator or Photoshop, you would not get a good
results.
You can solve your problem by exporting your Flash work as
.AI.
Your idea about the ability to copy from Flash to Illustrator
is a good idea although Illustrator can not read some of the Flash
imported information correctly. But it is still a good enahcement
idea. There is a link where you can add suggestions but I do not
remember it and I am replying using mobile, so my browsing
capabilities is limited.
I will try to post the link here when I got to my back normal
connection
Thanks alot!!

Import vs. Copy & Paste

Similar Messages

Maybe you are looking for