Import wizard -Does the connection parameter gets changed to prod query

Hello all,
we are planning to use import wizard and move all the stuff from BOBJ dev to Bobj QA. All the universes created are based on SAP BI query.
When using the txport wizard we are basically doing the Select all and Importing all the options given by system. My question is - Would the universe start pointing towards queries that we have already transported from BW dev to BW qa (we are using sap authentication)?
Also when we select all will the user group, client created access levels and root/public folder all get transported?
We are getting a warning message "You have chosen to import server groups from source environment" - Server groups are imported w/o member services. After importing is complete you will have to manually add the desired server to the imported server groups. Failure to do so will render the server groups invalid, which will prevent any reports dependent on the server group from running succesfully......should we not import server groups?
Thanks in advance for your answers.

Hi Stratos,
Finally we were able to import our universes and reports. So once the import is done, do I need to open the designer under my QA authentication and then go to the parameters and edit the connection to point to BWQ server and system? Once we do the change save universe and export it to the BOBJ QA CMS?
Let me know.Thanks in advance

Similar Messages

HT2646 Does the HDMI cable get connected to the TV or HD receiver if you have a Bose surround system

In setting up apple tv does the HDMI cable get connected to the HD reliever instead of in back of the tv when u have a Bose system?

Your best bet is to connect the AppleTV's HDMI to the Bose and the Bose HDMI to the TV. You could connect the AppleTV's HDMI to the TV and the AppleTV's optical to the Bose but optical (S/PDIF, specifically) does not have as much bandwidth as HDMI so you'd potentially have lower quality sound (from what I've read...I'm not an expert on audio).

What does the "styles" parameter pertain to when building a resource module?

There are a number of things I'd like to get into a single resource module. CSS is one of them.
Does the 'styles' parameter refer to CSS styles, and if so, how do I add them to the module and access them at runtime?

Dear Vijayudu1,
First things first.
1. Failovers are NOT errors. They are just showing that if particular url set for the RSL(Runtime Shared Libraries) as mentioned in flex-config.xml, is not found then they had used a backup url to get connected.
Have a reference from : http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf674ba-7fff.html
2. Try using: -locale en_US -source-path=locale/{locale} -keep-all-type-selectors=true ,and other paramaters for compiling resource bundles. Hope you may resolve your errors.

Does the iphone cpu frequency change when the cpu load is different?

Does the iphone cpu frequency change when the cpu load is different, or it does not change, stay a fixed frequency? if it changes, how can i get the realtime cpu frequency?if anyone knows,please tell me, thank you so much!!!

As a general, historical statement Tonefox is correct. For certain particular cpus woodmeister is correct. Cpus have historically been single frequency units, though over-clocking has been done for several years. Doing so pushes the cpu beyond its guaranteed speed, but has tended to work since most cpus from quality vendors will actually operate at higher speeds. The manufacturer just does not guarantee the results...remember the Pentium fiasco in the early years of that chip? Today manufacturers are ceertifying particular product lines for over-clocking on a periodic basis. And that is what dynamic clocking really is, over-clocking but not at a constant clock speed as has been done in the past.
Much of the silicon on the market will function at higher clock rates, the only question is does the maker guarantee the accuracy and performance at those clock rates.

Why does the "Computer Name" sometimes change?

                Not a big deal, just curious, why does the "computer name" sometimes change?
                 The name will be the same, but it will add a number....2,3,4...I always change it back so it doesn't have a numeric value next to it, but just wondering why it happens.
                                        Thanks.

Can also occur after your computer is put to sleep and then wakes back up or after your computer is force quit and immediately restarted. Sometimes the router 'believes' the computer is still connected when it actually isn't. When that computer re-establishes a connection the router 'tells' the computer that a computer with that name already exists so it has to change its name. By default a computer running MacOS adds a number (or increments its number) when this happens.

Why does the fire fox page change, sometimes it is just an orange fire fox button and othr times it says file, edit, view History, bookmarks, tools, help? I barely learn how to run one version of the page and then it changes

Why does the fire fox page change, sometimes it is just an orange fire fox button on the top left that opens a panel with all the things listed in it and then it sometimes has a bar across the top that says File, Edit, View, History, bookmarks, tools, Help? I barely get used to using one type of set up and then it changes to the other without me doing anything??

[[Menu bar is missing]] and [[Preferences are not saved]] may help to you

Where does the ACS server get the DNS info for IP pools?

I am trying to change the DNS servers that my VPN users are assigned from the IP pools on the ACS server. Where does the IP pools get the DNS server information. I have changed the DNS Ips on the windows server and rebooted. But the VPN clients are still being assigned the old DNS servers.

ACS ip pools do not push DNS server information
It is either being forwarded from VPN concentrator group setup or
it is being send from ACS user/group setup > Radius(VPN 3000) attributes > [026/3076/005] Primary-DNS.
Hope this helps.
Regards
Rohit

Why does the connection to the server on port 143 keep timing out?

why does the connection to the server on port 143 keep timing out?

no special character and I just found a post regarding this same issue that's happening today for alot of people
see this post for more details
i can't access my yahoo mail on my iPhone. I get the error message...."The connection to the server "apple.imap.mail.yahoo.com" on port 993 timed out"......is the server having issues? anyone else have this problem?

HT3382 using the thunderbolt to vga adapter, i have to unplug and replug the connection to get my display to "wake up" what's the deal?

using the thnderbolt to vga adapter, I have to unplug and replug the connection to get my disply to "wake up" What's the deal? otherwise works fine.
Same on initial boot up

First try > Resetting your Mac's PRAM
There have also been others reporting problems with analog VGA connected monitors. If your monitor also supports DVI, then you may want to use the supplied HDMI to DVI adapter or switch to a Mini DisplayPort to DVI Adapter and a good DVI cable.

When and how does the message context get removed from the message when we use pass thru send port

Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
Ravindar

Thanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar

How does the MDKP table gets updates

Dear PP Guru's,
I am new to SAP PP,
We have a query that how does the MDKP table gets updates,
Some time If we create new material by coping the material which is showing in table MDKP,
But new material is not showing in table MDKP,
Based on table MDKP we are fetching some data, due to above problem we are not able to fetch the data for some materials,
Please suggest what could be the reason,
Any help will be highly appreciated,
Thanks in advance,
Sachin.

Thanks Thaila,
I have checked the same by doing MRP through MD02 & the entry is getting update in MDKP,
But for some of our materials MRP (MD02) is done earlier, but these materials are not showing in MDKP,
Please suggest, when the entries in MDKP are removed, are there any conditions for removing the entries from MDKP.
please pour some light on the issue,
Thanks once again,
Sachin.

How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized

How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized. Do the actual trigger lines get measured or does the attribute get initialized to a default value when the vxi resource manager is executed?

Hey whl6868,
According to page 157 (or 3-135) of the manual (http://www.ni.com/pdf/manuals/370132c.pdf), there is no default value for VI_ATTR_VXI_TRIG_STATUS. If Resman is returning valid values for it, then it must be actually reading the lines. Else, I would only expect it to return valid values when you actually call the function yourself.
Regards,
David R
Applications Engineer
National Instruments

Why does the IPhone 4 get really hot, when you are making a phone call??

I can't seem to find the answer to this riddle . why does the iPhone 4 get really hot when you are making phone calls or when using face Time ??

It doesn't.
There must be an issue with your iphone.
Have you tried reset? Restore?
Have you made an appointment at the genius bar to have them look at it?

What the IP address does the Web Server get?

Hi all,
We have a scenario like this:
Client>Proxy(like squid)........>Web Server( 6.1 SP7)>Application
We know that the Web Server will get the remote IP address, and set as proxy-ip in HTTP Header.
But, what the exact remote IP address does the Web Server get? The IP of the Proxy? or The IP of the original client?
If we want to get the original client IP in the Application, what do we need to do?
Thanks!
Shen

Look at the documentation for customized logging
http://docs.sun.com/app/docs/doc/821-1497/gdsxf?l=en&a=view
Basically, you configure a custom log file format in SJSWS
And instead of using the variable: %Ses->client.ip%
you will use something like the variable: %Req->headers.X-Forwarded-For%

How can we track the entire event in which the form mode gets changed?

If the form is in OK Mode and if the user edits any field(Including UDF Window Fields). form mode changes to Update...So at that time, how can we track the entire event in which the form mode gets changed?
Thanks
Hari

Dear hari angamaly,
You could get the form mode by FormMode Property in ItemEvent Object in UI API.
Best Regards
Jane Jing
SAP Business One Forums team

Import wizard -Does the connection parameter gets changed to prod query

Similar Messages

Maybe you are looking for