Importance of Certification for Domain Change

Hi,
I have two years experience in development in .Net technologies in a reputed MNC. After that I took a break for personal reasons and now am planning to get back into the industry. During that period of work, i had taken part in a "boot camp" carried out by my company itself in SAP PI/XI 7.1, which perked a lot of interest in me towards SAP. Domain change, unfortunately, was not encouraged in my company, at least at my level.
I am now looking forward to doing Certification in a SAP module. I have a few questions.
1. Even though I have coding experience, will I be counted as a fresher, since it is not in SAP technologies? I think Certification is important towards improving my chances in improving my chances in securing a job as a SAP consultant?
2. I am leaning more towards functional modules than technical. My work exposed me more towards communications end, especially mobile app development, can any one suggest a good module i should look into? I liked SAP PI/XI since including a bit of coding as well, which i though would be good for me since i have experience in that domain, but some consider it as an advanced module, so I'm really not sure.
Thanks and regards,
Arnab

Hi Arnab,
1. As far as SAP is concerned, you would be considered as a fresher. However, your .net experience would be some handy. SAP Certification may help to market your CV being a fresher. At the end of day, whether you have Certification or not, you need to show case and prove your abilities in the interview.
2. Particularly, mobile technologies have good demand. You should follow the mobile technology space on SCN. There are some wonder people in this area, I am sure, they would be able to advise you in more details.
Hope this helps.
Kind Regards,
Ravi

Similar Messages

Certifications for Domain EHS Domain Knowledge

Hi All,
I am currently working with an leading Software MNC as an SAP EHS Consultant - Product Safety Sub module and would like to get more domain knowledge in this area.
I am interested in knowing there are any certifications which would give me domain expertise in EHS. I came across NEBOSH International General Certificate so wanted to know more about the scope of taking such a certificate.
if any one has taken such a certificate, do share your experiences.
Thanks,
Gaurish

Dear Gaurish
check e.g.: SAP EHS Management for Beginners
Most of your topics is considered in this thread like:
1.) is there a certification (Answer: no)
2.) there to start with EHS/EHSM?
3.) What ar job opportunities?
4.) What are training options
etc.
C.B.
PS: if your question is not related to SAP EHS etc. certification: I am sory to say that the world is to big to explain what you might need here (there are too many different isuues/toics to cover). To my knowlegde there is nothing in place which is accepted "globally". You need to differentiate product safety topics, dangerous goods m,anagement topics, topcc regarding IHS,, waste handling etc.
I have "shortly" googled the term "NEBOSH International General Certificate" (and found something like
Qualifications | Nebosh
International General Certificate in Occupational Health and Safety --- NEBOSH Online Store
NEBOSH - Wikipedia, the free encyclopedia
Nether heard before. Therefore if or if not this certificate might help you to find a job opportunity: no idea; But it seems to be related more on the "business/legal" side rather than linked to SAP EHS topics.

Anyone Seen this Message Before "Configuration changes for domain saved to the repository."

I'm running into this situation where one of my WLS servers is generating the following
messages "Configuration changes for domain saved to the repository." This process
of saving to a repository is causing an issue on start-up. Typically my deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I've made no changes
to my application. I've been able to identify that this process of saving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable this message?

This is just WebLogic writing back changes to config.xml, which it does from time
to time for reasons like:
- your app deployment has changed.
- you've reconfigured something in the console.
etc...
WebLogic just spins this off into a handy execute thread, so it would be surprising
if this was causing your app deployment to slow down (how do you know it is).
In my experience, slower than normal app deployments are usually down to:
- waiting for database connections.
- waiting for connecitons to other external resources.
Remember (in WLS6.x anyway) initialisation is done serially on the main thread,
so if something's slow, everything gets blocked behind it.
simon.
I'm running into this situation where one of my WLS servers is generatingthe following
messages "Configuration changes for domain saved to the repository."This process
of saving to a repository is causing an issue on start-up. Typicallymy deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I'vemade no changes
to my application. I've been able to identify that this process ofsaving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable thismessage?

Photos recently changed from sequential numbering to date/timestamp. When I import into apps for editing they are out of order. What can be done to change back to sequential numbering instead of date/timestamp?

Photos recently changed from sequential numbering to date/timestamp. When I import into apps for editing they are out of order. What can be done to change back to sequential numbering instead of date/timestamp?

The date information is taken from the camera which writes it to the file. This needs to be set to the correct date and time in the camera itself.
The order the images are shown in the Library mode is set by clicking on the sort button in the tool bar, which if not showing can be activated from view, tool bar. There are different sort orders that can be applied including sorting by file name. You can also sort by dragging the images to the order you wish them to appear in by selecting user order.

How-to-tick-automatically-adjust-clock-for-daylight-saving-changes-for-domain-users

hi
please help me
I am using windows 2008 as a domain controller with windows XP & windows 7 as a client.
how-to-tick-automatically-adjust-clock-for-daylight-saving-changes-for-domain-users
Thanks in Advance
my mail: [email protected]

Some more information would be nice (how many computers are in the domain?), but I think I have what you're looking for.
What you need to do is change a registry key in the client computers. It's located in the registry at
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation
The string name is DynamicDaylightTimeDisabled and the value for this item is
0 (Kind of weird - by entering 0, you're saying "No, I DON'T want to DISable daylight savings time).
Of course, you'll need to deploy this registry information to the clients from the server. There are several ways to do it, but the first one I'd try is to create a registry preference item on the server and deploy it as a GPP.
This link explains how to do this:
http://technet.microsoft.com/en-us/library/cc753092.aspx

No windows identity for Domain Name\User

I have recently upgraded SharePoint 2013 farm from RTM to SP1. I am repeatedly getting errors No windows
identity for Domain Name\User in ULS log. Some users who was earlier able to access to site is not able to access site.
Please remember to mark the replies as answers or vote as helpful if they help.

Few questions to quickly check with you..
1. Have you re-run your SharePoint Configuration Wizard after you upgraded from RTM to SP1? Its very important to re-run SharePoint Configuration Wizard to ensure SharePoint Config DB is updated with latest changes in the farm.
2. If you have performed the above step but still face issues, have you restarted your SharePoint Server after re-running your SharePoint Configuration Wizard? If not please restart the server.
3. If not anyone of the above, then have you changed your authentication type for your web application in Central Admin. Example, from Classic Authentication to Claim Based Authentication?
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

How can we suggest a new DBA OCE certification for very large databases?

How can we suggest a new DBA OCE certification for very large databases?
What web site, or what phone number can we call to suggest creating a VLDB OCE certification.
The largest databases that I have ever worked with barely over 1 Trillion Bytes.
Some people told me that the results of being a DBA totally change when you have a VERY LARGE DATABASE.
I could guess that maybe some of the following topics of how to configure might be on it,
* Partitioning
* parallel
* bigger block size - DSS vs OLTP
* etc
Where could I send in a recommendation?
Thanks Roger

I wish there were some details about the OCE data warehousing.
Look at the topics for 1Z0-515. Assume that the 'lightweight' topics will go (like Best Practices) and that there will be more technical topics added.
Oracle Database 11g Data Warehousing Essentials | Oracle Certification Exam
Overview of Data Warehousing
Describe the benefits of a data warehouse
Describe the technical characteristics of a data warehouse
Describe the Oracle Database structures used primarily by a data warehouse
Explain the use of materialized views
Implement Database Resource Manager to control resource usage
Identify and explain the benefits provided by standard Oracle Database 11g enhancements for a data warehouse
Parallelism
Explain how the Oracle optimizer determines the degree of parallelism
Configure parallelism
Explain how parallelism and partitioning work together
Partitioning
Describe types of partitioning
Describe the benefits of partitioning
Implement partition-wise joins
Result Cache
Describe how the SQL Result Cache operates
Identify the scenarios which benefit the most from Result Set Caching
OLAP
Explain how Oracle OLAP delivers high performance
Describe how applications can access data stored in Oracle OLAP cubes
Advanced Compression
Explain the benefits provided by Advanced Compression
Explain how Advanced Compression operates
Describe how Advanced Compression interacts with other Oracle options and utilities
Data integration
Explain Oracle's overall approach to data integration
Describe the benefits provided by ODI
Differentiate the components of ODI
Create integration data flows with ODI
Ensure data quality with OWB
Explain the concept and use of real-time data integration
Describe the architecture of Oracle's data integration solutions
Data mining and analysis
Describe the components of Oracle's Data Mining option
Describe the analytical functions provided by Oracle Data Mining
Identify use cases that can benefit from Oracle Data Mining
Identify which Oracle products use Oracle Data Mining
Sizing
Properly size all resources to be used in a data warehouse configuration
Exadata
Describe the architecture of the Sun Oracle Database Machine
Describe configuration options for an Exadata Storage Server
Explain the advantages provided by the Exadata Storage Server
Best practices for performance
Employ best practices to load incremental data into a data warehouse
Employ best practices for using Oracle features to implement high performance data warehouses

Vote For Skype Changes You Want

Want to Vote For Skype Changes? Make Suggestions?
I know many of us Skype users see things that are needed. Things that were taken away we want back. Plus I have heard some very good new ideas.
Hopeful Skype Is Listenting...
I am hopeful. Why? Because we are starting to see a few small GOOD changes on Skype, after breaking a few important things. (did you know we can now remove messages f users in our group Skype rooms with Skype version 7.0?. HOW ABOUT EDIT? and how about Cloud Rooms?)
Vote Here
I made a Survey here where you can vote.
and suggest new ideas for things you want Skype to change.
Here is the purpose of this Topic. Please contribute in these ways:
Make Suggestions both here and in the Survey
Vote for all the ideas in the survey
Lets talk here about changes and their benefits and your reasons.
Be hopeful, positive and polite please or we will ask admin to remove your comments here.
Get my Skype Tips or Find New Skype Friends and Skype Chat Rooms at my Skype Directory or join my membership site all about Skype http://SeeYouOnSkype.com

Excellent reply SeanEllis Thank you.
Yes after I had the ideas, wrote a survey and created the Skype Room group, I discovered the Forum thread about Skype Ideas and had the same thought. they are already doing this. So, I guess the benefit of mine is to raise awareness of this Skype Idea Community Board.
In my Skype Room guidelines, there is a link to the Survey which has links to all the Skype Ideas Boards for all the Skype clients, (Win7,8 iOS, Mac)... well Mac didnt have one, but I linked to the Mac blog & community.
I completely agree and love the explanation of the process to elevate the most Kudo'd (voted for/ popular) idea requests for implimentation. Very Impressive. People don't relaize that Skype/MS is listening... as you said ... to the clear focused voice of the most voted for and commented on Ideas for Skype changes. So Pleae dont dilute the votes for the same request! I will repeat the good info I found and link to it again....
You can submit your improvement ideas to Skype for Windows desktop quickly and easily here. Learn how
Idea submission tips:
Only one idea per submission
Pick a descriptive title
Very encouraging, I say! My Skype Groups are all invited to read this, search for your ideas first, submit yours only if someone else has not yet. Than vote for the ones you want with the Kudo button below. Do leave comments on teh ideass you want Skype to make happen.
Thanks everyone!
Julie
PS Status of Your Idea
This is what shows me that Skype/MS is listening (from the last link above, in case you want to read the whole thing):
What do the votes/kudos mean?
Just as you can give kudos in the community boards and blogs, you can vote for ideas you like on the Idea Board. Ideas with high vote totals are more likely to be recognized and accepted by the teams at Skype who develop our products and services. You can also leave comments on ideas, but remember to be kind! (my underline)
What do the different idea statuses mean?
We strive to review submitted ideas on a biweekly/monthly cycle. Each idea will go through a life cycle that will be assigned statuses at each milestone. The statuses are explained here:
Status of Your Idea:
New Idea - Sparkly new idea, submitted by you (my tweak - or someone else), and ready to be vetted by the community.
Comments Requested - Items set as Comments Requested will be open to the community for feedback and votes.
Under consideration- Idea has been forwarded to appropriate business team who is determining feasibility.
More information needed- More information is needed before our Product Management team can take this forward, please review the comments left by the team.
Duplicate - Ideas in this status have already been submitted in some form or another. We will link these items over to the other idea so you can review the status or track the progress there.
Already exists - This is available in the product.
Future possibility - Idea is a good one but not something we can include in a near-term product or software release.
Accepted - Idea has been accepted and has been taken forward for implementation, check back soon for updates.
Not right now - We like the idea but just not for right now, we will revisit it in the future.
Implemented - You asked for it, we did it!
For the full article read this.
Get my Skype Tips or Find New Skype Friends and Skype Chat Rooms at my Skype Directory or join my membership site all about Skype http://SeeYouOnSkype.com

Adobe Photoshop Lightroom 5.7 error this message when I import a picture for editing

Dear Friend
I am writing on this forum to asking you for help. a few day a go I am headache with my Lightroom 5.7 software. when I import a picture for editing it alert the message above. So I can not do anything with any picture for my work it so boring. I read many forum they talk about disk utility to repair the permission and set the permission folder I try all these but I still can not fix it. any one can explain me on detail about this kind of issue. and I really appreciate for those who can solve this issue.
thanks in advance for your helping me
Ken Chariya

Dear dj_paige
Let I explain you about this picture. Ya is my destination folder I put all my picture in this folder. and then I right click on it --> and then go to get info after that --> this dialogbox window apear and I change all the permission to read and write. when I open light room and import the destination folder Ya. I still meet the same problem " Some import operation were not performed. Could not move a file to the request location." do you have any solution beside of this please let me know.
thanks
Ken chariya

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

ABAP for Super Dumps: Import- & Export-Parameter for a Table in a FM

Hello ABAP Profs,
sorry I am BW.
Import- & Export-Parameter for a Table in and out of an Function Modul.
I want to import a table into a Function Module, change it and export it again.
How do I have to define the Import- and Export- Parameters in the FM ?
The table looks looks this:
DATA: zvpshub_tab TYPE SORTED TABLE OF /bic/pzvpshub WITH UNIQUE KEY
/bic/zvpshub objvers /bic/zvpsoursy INITIAL SIZE 0.
Thanks a lot
Martin Sautter

Hi Clemens,
in SE11 I defined a datatype of Type Structure: ZVPSHUB_ROW.
in SE11 I defiend a datatype of Type Tabletype: ZVPSHUB_TAB,
bases on Rowtype ZVPSHUB_ROW.
in SE 80 I creates an FM with a CHANGEING Parameter referencing ZVPSHUB_TAB:
FUNCTION ZVP_SHUB_TAB_LOAD.
""Lokale Schnittstelle:
*" CHANGING
*" VALUE(SHUB_TAB) TYPE ZVPSHUB_TAB
in RSA1 in BW in the Startroutine of the Upload Rules in defined the table:
DATA:shub_tab TYPE zvpshub_tab.
in RSA1 in BW in the Startroutine of the Upload Rules in defined the table:
DATA:shub_tab TYPE zvpshub_tab.
in RSA1 in BW in the Startroutine i called the FM
CALL FUNCTION 'ZVP_SHUB_TAB_LOAD'
 CHANGING
 shub_tab = shub_tab.
and it works ..
Thank You
Martin Sautter

Joining vbak to cdhdr table for document changes

Hi Expert
I am hanging for a week in this project please need some advice
I want to join vbak table with cdhdr and select
vbak.vkbur (plant) and want to show that vkbur in the internal table of it_cdhdr
so as to select only those plant belong to vkbur so how can I join base on the below coding................
REPORT ZCHGDOC
NO STANDARD PAGE HEADING LINE-SIZE 120.
WRITE: sy-title, 40 'Page', sy-pagno.
ULINE.
TABLES: CDHDR,
         CDPOS,
         t001w,
         "VKBUR,
         "VBELN,
         VBAK,
         VBAP.
SELECTION-SCREEN BEGIN OF BLOCK DOCUMENT WITH FRAME TITLE TEXT-701.
SELECTION-SCREEN END OF BLOCK DOCUMENT.
SELECT-OPTIONS:
                 V1 FOR VBAK-VKBUR,
                 S_WERKS for T001W-werks,
                 objectid for cdhdr-objectid,
                 udate for cdhdr-udate.
PARAMETER: USERNAME LIKE CDHDR-USERNAME.
DATA: BEGIN OF IT_VBAP OCCURS 0,
         OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
         OBJECTID LIKE CDHDR-OBJECTID,
         VBELN LIKE VBAP-VBELN,
          END OF IT_VBAP.
DATA: BEGIN OF IT_CDHDR OCCURS 0,
         OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
         OBJECTID LIKE CDHDR-OBJECTID,
         CHANGENR LIKE CDHDR-CHANGENR,
         USERNAME LIKE CDHDR-USERNAME,
         UDATE LIKE CDHDR-UDATE,
         UTIME LIKE CDHDR-UTIME,
         FNAME LIKE CDPOS-FNAME,
         TABNAME LIKE CDPOS-TABNAME,
         TABKEY LIKE CDPOS-TABKEY,
         VALUE_NEW LIKE CDPOS-VALUE_NEW,
         VALUE_OLD LIKE CDPOS-VALUE_OLD,
END OF IT_CDHDR.
DATA: WA LIKE LINE OF IT_CDHDR.
DATA: WA LIKE LINE OF IT_CDPOS.
DATA: BEGIN OF IT_CDPOS OCCURS 0,
         OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
         OBJECTID LIKE CDHDR-OBJECTID,
         CHANGENR LIKE CDHDR-CHANGENR,
         TABNAME LIKE CDPOS-TABNAME,
         TABKEY LIKE CDPOS-TABKEY,
         FNAME LIKE CDPOS-FNAME,
         VALUE_NEW LIKE CDPOS-VALUE_NEW,
         VALUE_OLD LIKE CDPOS-VALUE_OLD,
END OF IT_CDPOS.
Move-corresponding it_cdhdr to wa.
Move-corresponding it_cdpos to wa.
SELECT OBJECTCLAS
        OBJECTID
        CHANGENR
        USERNAME
        UDATE
        UTIME FROM CDHDR
        INTO CORRESPONDING FIELDS OF TABLE IT_CDHDR
WHERE OBJECTCLAS = 'VERKBELEG' or
      objectclas = 'BETRIEB'
      ORDER BY UDATE.
WHERE OBJECTCLAS = 'VERKBELEG'
OR OBJECTCLAS = 'BETRIEB' ORDER BY UDATE.
Filter data based upon Plant selection criteria.
IF NOT S_WERKS[] IS INITIAL.
DELETE IT_CDHDR WHERE NOT OBJECTID IN S_WERKS.
ENDIF.
IF IT_CDHDR[] IS NOT INITIAL.
   SELECT OBJECTCLAS
          OBJECTID
          CHANGENR
          VALUE_NEW
          VALUE_OLD
          FNAME
          TABNAME
          TABKEY
          FROM CDPOS
          INTO CORRESPONDING FIELDS OF TABLE IT_CDPOS
          FOR ALL ENTRIES IN IT_CDHDR
          WHERE
          OBJECTCLAS = IT_CDHDR-OBJECTCLAS
          AND OBJECTID = IT_CDHDR-OBJECTID
          AND CHANGENR = IT_CDHDR-CHANGENR.
          "or tabname = 'VBAP'.
   SORT IT_CDPOS BY OBJECTCLAS OBJECTID CHANGENR.
ENDIF.
Add tables CDPOS DATA TO CDHDR.
DATA: INDEX TYPE i.
LOOP AT IT_CDHDR.
   INDEX = SY-TABIX.
   READ TABLE IT_CDPOS WITH KEY OBJECTCLAS = IT_CDHDR-OBJECTCLAS
   OBJECTID = IT_CDHDR-OBJECTID
   CHANGENR = IT_CDHDR-CHANGENR BINARY SEARCH.
   IF SY-SUBRC = 0.
     IT_CDHDR-VALUE_NEW = IT_CDPOS-VALUE_NEW.
     IT_CDHDR-VALUE_OLD = IT_CDPOS-VALUE_OLD.
     MODIFY IT_CDHDR INDEX index TRANSPORTING value_new value_old.
   ENDIF.
   WRITE:/ SY-DATUM,SY-UZEIT,
          50 'DOCUMENT CHANGE REPORT',
         80 'Page', SY-PAGNO,
" WRITE: / SY-REPID
          50 'DETAIL REPORT BY PLANT '.
   SKIP.
   ULINE.
*& T O P - O F - P A G E *
WRITE:/ 'UDATE:' ,SY-DATUM.
FORMAT COLOR 4 INTENSIFIED on.
Write: /35                           ' DOCUMENT CHANGES REPORT '.
   WRITE: /5 'DOCUMENT-NO'.
20 'TABNAME', 30 'TEXT_CASE', 50 'FNAME'.
   WRITE: /5 'DATE', 20 'FNAME', 45 'CHANGE-NO',65 'OLD-VALUE',80 'NEW-VALUE',95 'USER-NAME'.
   ULINE.
   LOOP AT IT_CDHDR INTO WA.
   on change of wa-objectid.
   Write: / wa-objectid UNDER'DOCUMENT-NO' ."color col_key.
   ENDON.
ULINE.
     " CDPOS-tabname UNDER'TABNAME', CDPOS-TEXT_CASE UNDER'TEXT_CASE',CDPOS-fname UNDER'FNAME'. "color col_key ,
     write: / wa-udate dd/mm/yyyy under'DATE' NO-GAP,wa-fname under'FNAME' NO-GAP,wa-changenr under 'CHANGE-NO',
     wa-value_old under'OLD-VALUE' LEFT-JUSTIFIED NO-GAP,
     wa-value_new under'NEW-VALUE' LEFT-JUSTIFIED NO-GAP ,wa-username under'USER-NAME' NO-GAP.
ENDON.
Move-corresponding it_cdhdr to wa.
*Write: / wa-objectid UNDER'DOCUMENT-NO' "color col_key.
*" CDPOS-tabname UNDER'TABNAME', CDPOS-TEXT_CASE UNDER'TEXT_CASE',CDPOS-fname UNDER'FNAME'. "color col_key ,
*write: / wa-udate dd/mm/yyyy under'DATE' NO-GAP,wa-utime under'TIME' NO-GAP,wa-changenr under 'CHANGE-NO',
ltrim(wa-value_old) under'OLD-VALUE' NO-GAP,
*wa-value_new under'NEW-VALUE' NO-GAP ,wa-username under'USER-NAME' NO-GAP.
   ENDLOOP.
ENDLOOP.

Hai everybody.
I am new to this forum. i got a job in abap recently. The below is my requirement.I want solution for this one. Anybody plz help me.
The change logs were captured in DBTABLOG for table ZWPRFRUND (in transaction ZWPG).
The only report which is currently used to get the change logs is RSVTPROT
Now my requirement is,
we need to display the change logs in the form of ALV.
We should divert the changes to CDHDR table instead of DBTABLOG, then we can use the RSSCD100 to display change logs.
The Important items for the change LOG needed in case of changes to table in ZWPG are,DATE ,TIME,USER,FIRST NAME,FILED NAME,OLD VALUE,NEW VALUE
The above fields need to be displayed in the grid. In the above list FIELD NAME denotes any field of the table in the transaction in ZWPG
Thanks & Regards,
Sujatha.T.

Client Certification for Sender SOAP Adapter

I am trying to configure an incoming SOAP call to allow client certification for autentication and not ask for username/pwd. I already tried changing the configuration of the SOAP adater in visual admin to have the client certification module with no luck.
Please let me know if anyone has already done this before.

Hi,
Check the link for Client Certificate authentication...
[http://www.i-barile.it/SDN/EnablingSSL&ClientCertificatesOnTheSAPJ2EEEngine.pdf]
Regards,
Prakasu.M

Windows 2012 Verification of prerequisites for Domain Controller promotion failed

Windows 2012 Verification of prerequisites for Domain Controller promotion failed and gave the below error(In computer management local group and user option is not there as suggested by a solution!)
"Verification of prerequisites for Domain Controller promotion failed. The local Administrator account becomes the domain Administrator account when you create a new domain. The new domain cannot be created because the local Administrator account password
does not meet requirements.
Currently, the local Administrator password is blank, which might lead to security issues. We recommend that you press Ctrl+Alt+Delete, use the net user command-line tool, or use Local Users and Groups to set a strong password for the local Administrator
account before you create the new domain."

OK, the reason you see this error is because when you set up and configured your Windows R2 environment you may have logged into the OS with an account other than Administrator. So, if you created your log in account named Bob, this is throwing off the Server.
So, hit Ctrl-Alt-Delete, and look who you are logged in as, and then change the account you are logging in as and use the local Administrator account. What you may find is that the default Admin account password has not been set.
Check that out and see if that is what you are experiencing.
Best wishes

Certification for SAP - ABAP

is there any certification for SAP-ABAP ???

Hi this will help u.
certification ..
This is link from SAP about ABAP certification
http://www50.sap.com/useducation/certification/curriculum.asp?rid=351
http://www.sapteched.com/india/confactivities/certexam.htm
http://www50.sap.com/useducation/certification/curriculum.asp?rid=351
There is a pdf called ABAP certification.
http://www.esnips.com/web/SAP-ABAP?
You can try www.sapdoamin.com
They provide Certification simulation questions which are very useful and a must try site.
Have a look at below link for mySAP Technology - ABAP Workbench
https://websmp206.sap-ag.de/~sapidp/011000358700000746472003E
Have a look at below link for SAP NetWeaver - ABAP Workbench
http://www30.sap.com/hk/services/education/pdf/cert/ABAPWB.pdf
The certification test consists of questions from the areas specified below:
Topic Areas
1. mySAP.com Technologies
- mySAP.com
- Navigation (system handling)
- Technical setup of an SAP system
- System-wide concepts
2. ABAP Workbench Basics (++)
- Data types and data objects
- Internal tables
- Data retrieval (authorization check)
- Subroutines
- The ABAP Runtime System
- Function groups and function modules
- Program calls and data transfer
3. ABAP Objects (++)
- Classes and objects
- Inheritance
- Casting
- Interfaces
- Events
- Global classes and interfaces
- Exception handling
- Dynamic programming
4. ABAP Dictionary (++)
- Database tables
- Performance for table access
- Consistency through input check (foreigh key dependency)
- Dependency of ABAP Dictionary objects
- Views
- Search help
5. Techniqes for List Generation (++)
- Data output to lists
- Selection screen
- Logical database
- Program-specific data retrieval
- Data formatting and control level processing
- Storage of lists and background processing
- Interactive lists
6. Dialog Programming (++)
- Screen (basics)
- User interface (GUI title, GUI status)
- Screen elements for output (text fields, status icons, and group boxes)
- Screen elements for input/output
- Subscreen and tabstrip control
- Table control
- Context menu
- Dialog programming lists
7. Database Changes
- Database updates with Open SQL
- LUWs and Client/Server Architecture
- SAP locking concept
- Organizing database changes
- Complex LUW processing
- Number assignment
- Change-document creation
8. Enhancements and Modifications
- Changes in SAP Standards
- Personalization
- Enhancements to Dictionary elements
- Enhancements using customer exits
- Business Transaction Events
- Business Add-Ins
- Modifications
Weighting Key in the Test:
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
with regards,
HEma SUndara.
pls give points if u find helpful.

Importance of Certification for Domain Change

Similar Messages

Maybe you are looking for