Importance of changing IP Addresses
I have yet had a reason to have my IP address changed. I do remember someone, and I don't remember what context it was in, wanting a new IP address because they got suspended from a game site and they track membership by IP address. This guy was pretty bummed and prolly would ahve given his left foot for a new IP address so he could join under a different name and IP address because he just could not live without that game. Other than that, nothing else comes to mind for the need for a new IP address, so I stay indifferent to the subject.
Nate2 wrote:
VinnyM69 wrote:No you're wrong. I checked that web page in your link. I doesn't reveal any personal information and the location it lists for me is actually a city a good 10 miles away from the city I live in. So the demographics are not accurate in any case. Like I said in my post, your IP address does not reveal any personal information about you. It reveals the registered owner of your IP address (your ISP) and nothing else. Looks like you won't make it as a data miner.
You expect all infomation from one site handed to you on a silver platter. 10 miles is close enough. And it wasn't Richardson, TX like you thought, was it? WIth other people, the info is accurate, including zip code and phone area code. As I stated in an earlier post the Whois Database lists my IP address as owned by AT&T in Richardson TX. From the web site you used my location is wrong, my zip code is wrong, etc. The only thing they had right was the area code which is not hard here as most of west MI has the same area code.
Those data miner guys work in collaboration with vendors who supply other bits of info.
In time, they correlate your e-mail address with your name, IP Address, geographic location, etc.Please explain how you think that the "data miner guys" and "vendors" are able to obtain my email address tied to my IP address and geograpich location. It's not fesable unless your talking about NSA and they've got better things to do than trying too look up Joe Blow's email/IP correlation. e.g. Google maintains all search words used from an IP Address.
So you say you have been using the same IP Address for years? Never said I used my IP address for years. How much info will that reveal about you?Like I said before my IP address reveals nothing about me. It's just a number, among millions of others out there. And people are willing to pay for that info.Please give us specifics. Your talking in generalities. I have a good friend who works for Nielsen Media Research and I am well aware of what is tracked as far as Internet usage and web browsing.
Interesting cases:
Someone (customer support) at AOL(?) started selling customer credit card info sometime ago.
I also head of a case where a customer/tech support person started selling info of certain subscribers to parties that paid him directly.
These parties were trying to locate (with criminal intent) a person using his IP address.Again you are talking about someone here who has done something illegal. In this type of situation court orders are obtained to get the required information. AOL, AT&T or any other ISP does not just hand it over. IP data mining in regards to web usage has been going on for years. It is done with IP addresses and in no way points back to any personal information about you. If you are not doing anything illegal, you have nothing to worry about. The people in black helecopters are not coming after you. Honest!
Similar Messages
-
How can I change email address RIM sends mail to?
I have two emails, one that's strictly friends and family, and one for everything else. A while back I changed the "everything else" address to gmail. Although I've never submitted my personal address to RIM (other than setting up that email on my phone), they've begun spamming my personal mail with daily "notifications." I don't mind getting the mail, but 1. I don't want it coming to my personal address, and 2. I find it very disturbing that RIM harvested my personal account info to use at their convenience. I see in the emails I receive I can "unsubscribe," although they'll still send me mail they deem important. I don't want that, I want to give them my new everything address, so they'll stay out of my personal acct. I have thoroughly searched their site, but see no way to submit this new address, or to set up my acct preferences for my interaction with RIM. Please tell me how to change my address with RIM, or to at least contact them, not about my phone, but about their service (there doesn't appear to be any such option among the "Contact Us" selections they offer). Thanks very much!
Notifications of what?
I promise you, from all I've seen, you would have had to check a box in something stating you want to receive updates, etc., from BlackBerry. They certainly haven't "harvested" your email address from simply being loaded to your BlackBerry.
You need to unsuscribe from the current emails you're getting. Even if you don't want to.
You probably downloaded an OS or file update or Desktop Software somewhere that you clicked to agree to receive updates.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
ESS Change of Address REQUESTED process
Hi all,
I had ESS Change of Address working since 2003. Now, I am having issues. Don't know when something changed, but in last year.
Any answers to any questions would be appreciated and if I need to clarify, by all means, let me know and I will break it down. I see an OSS Server Message coming anyway...
When I org designed a Change of Address WF in 2003, a user would (Edit OR Delete) a record, then it would create 2 locked records, and send only 1 REQUESTED event to start my WFs. HR would verify new record, unlock new record would automatically delimit old, and all is golden.
1.
Via Portal, user Edits address record, it creates 2 locked records in pa0006, and NOW it sends 2 ADDREMPUS->REQUESTED events. I think there is an oss note to stop 2 REQUESTED events in in srv pk 43.
SAP Note 1565056 - Function HR_EVENT_CREATE is triggered twice
Corrects WF from being called twice?
Also, if our HR service center processes the new locked record, it is not automatically delimiting the old record. Can't navigate to it in PA30 because it is already delimited and it is causing a lot of locked records in system. Can't get to it using nav left / right button because it is delimited. From my notes, HR svr cntr should only see the new locked record, verifies, unlocks, then that action is supposed to delimte the old without HR actually unlocking both. This ring a bell?
2. I have the same issue with Delete, except it only starts 1 WF, when it locks. Still trying to figure out why 'sometimes' it does not lock or raise REQUESTED or locks and no REQUESTED event. Elusive little bugger!
3. 1 day rule? If HR unlocks all records and then user makes another change on same day as updated by HR personnel, I get a locked record and no REQUESTED event.
This is not working right!
OSS notes? And more importantly, is this indeed how this "supposed" to work?
We are on ecc6 and hr srv pk 604-41.So, this is same solution for both PA30 and the call from Portals?
Oss Note 0001565056:
When an infotype record is maintained in the transaction PA30, the function
HR_EVENT_CREATE ('Create Event for Employees and Applicants using Infotype
Operations') is called twice. -
ABAP SD PRINTS CHANGE COMPANY ADDRESS
Hi experts,
I have a problem. The address of the company is changed, therefore we also need to update our address in the SAP system. We change the address in (founded at discussion):
a) OX10
b) SO10:
c) OBY6:
However, the printout appears still with our old address.
Please Help.
Best regards,
Mateusz ZimnyHi,
Thanks for the reply, I change it there, but didn't help. I copy and paste ZRFKORD80, it is program for print. Could you look at it?
REPORT zrfkord80 MESSAGE-ID fb NO STANDARD PAGE HEADING.
*=======================================================================
* Datenteil
*=======================================================================
INCLUDE rfkori00.
INCLUDE rfkori04.
TABLES: spell.
DATA: gv_l1 TYPE tdline,
gv_l2 TYPE tdline,
gv_l3 TYPE tdline,
gv_l4 TYPE tdline,
kpkw02 TYPE char30.
DATA: hcajo_number LIKE tcj_c_journals-cajo_number.
DATA: hsubrc LIKE syst-subrc.
* Tables (RFKORI00)
* Datenfelder für den Report RFKORD00
* Teil 1 : Einzelfelder (RFKORI00)
* Teil 2 : Strukturen (RFKORI00)
* Teil 3 : Interne Tabellen (RFKORI00)
* Teil 4 : Konstanten (RFKORI00)
* Teil 5 : Field-Symbols
* Teil 6 : Select-Options und Parameter
* Teil 7 : Field-Groups
* Teil 5 : Field-Symbols
* Teil 6 : Select-Options und Parameter
begin_of_block 2.
PARAMETERS: rforid LIKE rfpdo1-allgevfo.
PARAMETERS: sortvk LIKE rfpdo1-kordvarb.
PARAMETERS: dspras LIKE rfpdo1-kord30as.
PARAMETERS: xdispl TYPE xfeld DEFAULT 'X'.
PARAMETERS: danzzl LIKE adrs-anzzl DEFAULT '3' NO-DISPLAY.
end_of_block 2.
begin_of_block 8.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-110 FOR FIELD tddest.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS tddest LIKE tsp01-rqdest VISIBLE LENGTH 11.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS rimmd LIKE rfpdo2-f140immd DEFAULT ' '.
SELECTION-SCREEN COMMENT 61(15) text-111 FOR FIELD rimmd.
SELECTION-SCREEN END OF LINE.
PARAMETERS: prdest LIKE tsp01-rqdest VISIBLE LENGTH 11.
end_of_block 8.
begin_of_block 4.
SELECT-OPTIONS: rbukrs FOR bkorm-bukrs,
rkoart FOR bkorm-koart NO-DISPLAY,
rkonto FOR bkorm-konto NO-DISPLAY,
rbelnr FOR bkorm-belnr.
SELECT-OPTIONS: rgjahr FOR bkorm-gjahr.
PARAMETERS: rxbkor LIKE rfpdo-kordbkor.
PARAMETERS: revent LIKE bkorm-event.
SELECT-OPTIONS: rusnam FOR bkorm-usnam.
SELECT-OPTIONS: rdatum FOR bkorm-datum.
SELECT-OPTIONS: ruzeit FOR bkorm-uzeit.
SELECT-OPTIONS: rerldt FOR bkorm-erldt.
SELECT-OPTIONS: rcajon FOR tcj_documents-cajo_number.
PARAMETERS: rxtsub LIKE xtsubm NO-DISPLAY.
PARAMETERS: rxkont LIKE xkont NO-DISPLAY,
rxbelg LIKE xbelg NO-DISPLAY,
ranzdt LIKE anzdt NO-DISPLAY,
rkauto TYPE c NO-DISPLAY,
rsimul TYPE c NO-DISPLAY,
rpdest LIKE syst-pdest NO-DISPLAY.
PARAMETERS: rindko LIKE rfpdo1-kordindk NO-DISPLAY.
PARAMETERS: rspras LIKE rf140-spras NO-DISPLAY.
PARAMETERS: title LIKE rfpdo1-allgline NO-DISPLAY.
end_of_block 4.
* Teil 7 : Field-Groups
*=======================================================================
* Vor dem Selektionsbild
*=======================================================================
* Initialization
INITIALIZATION.
get_frame_title: 2, 4, 8.
*=======================================================================
* Hauptablauf
*=======================================================================
* Eingabenkonvertierung und Eingabenprüfung
AT SELECTION-SCREEN.
PERFORM check_eingabe.
* Start-of-Selection
SET BLANK LINES ON.
START-OF-SELECTION.
save_repid = 'ZRFKORD80'.
rf140-repid = 'ZRFKORD80'.
IF NOT rxbkor IS INITIAL.
save_event = revent.
save_rxbkor = rxbkor.
ENDIF.
save_forid = rforid.
* SAVE_TKOID = RTKOID.
save_tddest = tddest.
save_prdest = prdest.
save_pdest = rpdest.
save_rxtsub = rxtsub.
save_rimmd = rimmd.
save_dspras = dspras.
save_anzzl = danzzl.
save_rsimul = rsimul.
* IF SORTKZ = '1'
* OR SORTKZ = '2'.
* ELSE.
* SORTKZ = '1'.
* ENDIF.
* SAVE_SORT = SORTKZ.
save_sortvk = sortvk.
CLEAR hlp_t021m_k.
IF NOT save_sortvk IS INITIAL.
PERFORM sort_felder USING 'K' 'B'.
ENDIF.
kautofl = rkauto.
CLEAR xbkorm.
CLEAR countp.
CLEAR hbukrs.
REFRESH hbukrs.
LOOP AT rbukrs.
MOVE-CORRESPONDING rbukrs TO hbukrs.
APPEND hbukrs.
ENDLOOP.
LOOP AT rcajon.
MOVE-CORRESPONDING rcajon TO hcajon.
APPEND hcajon.
ENDLOOP.
IF NOT rxtsub IS INITIAL.
PERFORM prot_import.
ENDIF.
PERFORM message_init.
PERFORM currency_check_for_process USING save_repid.
IF alwcheck IS INITIAL
AND NOT alwlines IS INITIAL.
LOOP AT alw_bukrs.
IF alw_bukrs-bukrs IN rbukrs.
alwcheck = 'X'.
ENDIF.
ENDLOOP.
ENDIF.
* Datenselektion
IF t048-event NE save_event.
PERFORM read_t048.
ENDIF.
IF NOT rxbkor IS INITIAL.
PERFORM fill_selection_bkorm.
sortid = '6'.
PERFORM read_bkorm.
ELSE.
PERFORM selection_ohne_bkorm.
ENDIF.
* End-of-Selection
END-OF-SELECTION.
*-------Daten extrahiert ?----------------------------------------------
IF xextra IS INITIAL.
PERFORM message_no_selection.
ELSE.
* Sortierung
SORT BY hdbukrs sortk1 sortk2 sortk3 sortk4 sortk5 hdkoart
hdkonto hdbelgj hdkoar2 hdkont2 hdusnam hddatum hduzeit.
* Ausgabe
PERFORM kassenbelege.
ENDIF.
*=======================================================================
* TOP-OF-PAGE
*=======================================================================
TOP-OF-PAGE.
PERFORM batch-heading(rsbtchh0).
ULINE.
*=======================================================================
* Interne Perform-Routinen
*=======================================================================
* Interne Belege Formulardruck
INCLUDE zrfkori50.
* Leseroutinen
INCLUDE rfkori70.
* Leseroutinen
INCLUDE rfkori80.
INCLUDE rfkori81.
* Allgemeine Unterroutinen
INCLUDE rfkori90.
INCLUDE rfkori92.
* Routinen für Extract
INCLUDE rfkori91.
* Allgemeine Unterroutinen für Messages und Protokoll
INCLUDE rfkori93.
* User-Exits für Korrespondenz
*NCLUDE RFKORIEX.
* FORM ANALYSE_UND_AUSGABE
FORM analyse_und_ausgabe.
CLEAR xkausg.
CLEAR xnach.
CLEAR hsubrc.
hcajo_number = save_cajon.
IF NOT save_belnr IS INITIAL.
CLEAR xprint.
CLEAR tcj_c_journals.
CLEAR tcj_cj_names.
CALL FUNCTION 'FCJ_GET_CAJO_DATA2'
EXPORTING
i_comp_code = save_bukrs
i_cajo_number = hcajo_number
i_langu = save_langu
IMPORTING
e_tcj_c_journals = tcj_c_journals
e_tcj_cj_names = tcj_cj_names
EXCEPTIONS
* CAJO_NOT_EXISTENT = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
hsubrc = sy-subrc.
ENDIF.
CLEAR tcj_documents.
CALL FUNCTION 'FCJ_GET_DOCUMENT'
EXPORTING
i_comp_code = save_bukrs
i_cajo_number = hcajo_number
i_posting_number = save_belnr
IMPORTING
e_tcj_documents = tcj_documents
EXCEPTIONS
* NOT_FOUND = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
hsubrc = sy-subrc.
ENDIF.
CLEAR htcj_positions.
REFRESH htcj_positions.
CALL FUNCTION 'FCJ_GET_POSITIONS'
EXPORTING
i_comp_code = save_bukrs
i_cajo_number = hcajo_number
i_posting_number = save_belnr
TABLES
itcj_positions = htcj_positions
EXCEPTIONS
* NOT_FOUND = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
hsubrc = sy-subrc.
ENDIF.
CLEAR htcj_wtax_items.
REFRESH htcj_wtax_items.
CALL FUNCTION 'FCJ_GET_WT'
EXPORTING
i_comp_code = save_bukrs
i_cajo_number = hcajo_number
i_fisc_year = save_gjahr
i_posting_number = save_belnr
* I_POSITION_NUMBER =
TABLES
itcj_wtax_items = htcj_wtax_items
EXCEPTIONS
* NO_WTAX_ITEMS_GET = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* PERFORM READ_BKPF.
* APPEND HBKPF.
IF hsubrc = 0.
** IF BKPF-BSTAT = 'V'
* IF BKPF-BSTAT = 'W'
* OR BKPF-BSTAT = 'Z'.
* CLEAR FIMSG.
* FIMSG-MSORT = ' '. FIMSG-MSGID = 'FB'.
* FIMSG-MSGTY = 'I'.
* FIMSG-MSGNO = '856'.
* FIMSG-MSGV1 = BKPF-BSTAT.
* FIMSG-MSGV2 = BKPF-BUKRS.
* FIMSG-MSGV3 = BKPF-BELNR.
* FIMSG-MSGV4 = BKPF-GJAHR.
* PERFORM MESSAGE_APPEND.
* XKAUSG = 'X'.
* ELSE.
CLEAR save_budat.
rf140-title = title.
PERFORM kassenbelege_ausgeben.
* ENDIF.
ELSE.
* CLEAR FIMSG.
* FIMSG-MSORT = ' '. FIMSG-MSGID = 'FB'.
* FIMSG-MSGTY = 'I'.
* FIMSG-MSGNO = '547'.
* FIMSG-MSGV1 = SAVE_BUKRS.
* FIMSG-MSGV2 = SAVE_BELNR.
* FIMSG-MSGV3 = SAVE_GJAHR.
* PERFORM MESSAGE_APPEND.
* XKAUSG = 'X'.
ENDIF.
* ENDIF.
ELSE.
CLEAR hbkormkey.
CLEAR herdata.
hbkormkey-bukrs = hdbukrs.
hbkormkey-koart = hdkoart.
hbkormkey-konto = hdkonto.
hbkormkey-belnr = save_belnr.
hbkormkey-gjahr = save_gjahr.
CONDENSE hbkormkey.
herdata-usnam = hdusnam.
herdata-datum = hddatum.
herdata-uzeit = hduzeit.
CLEAR fimsg.
fimsg-msort = ' '. fimsg-msgid = 'FB'.
fimsg-msgty = 'I'.
fimsg-msgno = '294'.
fimsg-msgv1 = save_event.
fimsg-msgv2 = hbkormkey.
fimsg-msgv3 = herdata.
PERFORM message_append.
xkausg = 'X'.
ENDIF.
ENDFORM. "ANALYSE_UND_AUSGABE
* FORM CHECK_EINGABE
FORM check_eingabe.
DESCRIBE TABLE rerldt LINES erllines.
IF NOT erllines IS INITIAL.
IF erllines = '1'
AND rerldt-low IS INITIAL
AND rerldt-high IS INITIAL.
CLEAR xerdt.
ELSE.
xerdt = 'X'.
ENDIF.
ELSE.
CLEAR xerdt.
ENDIF.
IF xdispl IS INITIAL.
print = 'X'.
ENDIF.
IF NOT rxtsub IS INITIAL.
print = 'X'.
ELSE.
IF sy-batch IS INITIAL.
IF sscrfields-ucomm EQ 'PRIN'. "no difference between starting
sscrfields-ucomm = 'ONLI'. "with F8 or F13
* IF SY-UCOMM = 'PRIN'.
* SY-UCOMM = 'ONLI'.
print = 'X'.
xonli = 'X'.
ENDIF.
ELSE.
* IF SY-UCOMM = 'PRIN'.
print = 'X'.
* ENDIF.
ENDIF.
ENDIF.
IF NOT sy-batch IS INITIAL
OR ( sy-batch IS INITIAL
AND ( sscrfields-ucomm = 'PRIN'
OR sscrfields-ucomm = 'ONLI' ) ).
* AND ( SY-UCOMM = 'PRIN'
* OR SY-UCOMM = 'ONLI' ) ).
IF rxbkor IS INITIAL.
IF sy-batch IS INITIAL.
IF NOT rindko IS INITIAL
AND rspras IS INITIAL.
* IF SY-BATCH IS INITIAL.
SET CURSOR FIELD 'RSPRAS'.
* ENDIF.
MESSAGE e490.
ENDIF.
ELSE.
IF NOT rindko IS INITIAL.
MESSAGE e499.
ENDIF.
ENDIF.
* IF NOT REVENT IS INITIAL
* AND RINDKO IS INITIAL.
* IF SY-BATCH IS INITIAL.
* SET CURSOR FIELD 'REVENT'.
* ENDIF.
* MESSAGE W451.
* ENDIF.
IF revent IS INITIAL.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'REVENT'.
ENDIF.
MESSAGE e450.
ENDIF.
DESCRIBE TABLE rerldt LINES erllines.
IF NOT erllines IS INITIAL.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'RERLDT-LOW'.
ENDIF.
MESSAGE w452.
ENDIF.
DESCRIBE TABLE rusnam LINES usrlines.
IF NOT usrlines IS INITIAL.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'RUSNAM-LOW'.
ENDIF.
MESSAGE w478.
ENDIF.
DESCRIBE TABLE rdatum LINES datlines.
IF NOT datlines IS INITIAL.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'RDATUM-LOW'.
ENDIF.
MESSAGE w479.
ENDIF.
DESCRIBE TABLE ruzeit LINES timlines.
IF NOT timlines IS INITIAL.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'RUZEIT-LOW'.
ENDIF.
MESSAGE w480.
ENDIF.
ELSE.
IF NOT rindko IS INITIAL
AND NOT rspras IS INITIAL.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'RSPRAS'.
ENDIF.
MESSAGE e491.
ENDIF.
IF revent IS INITIAL.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'REVENT'.
ENDIF.
MESSAGE e450.
ENDIF.
IF NOT revent IS INITIAL.
CLEAR t048.
SELECT SINGLE * FROM t048
WHERE event = revent.
IF sy-subrc = 0.
CASE t048-anzdt.
WHEN '0'.
IF NOT t048-xkont IS INITIAL.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'REVENT'.
ENDIF.
MESSAGE e463 WITH revent.
ENDIF.
WHEN OTHERS.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'REVENT'.
ENDIF.
MESSAGE e462 WITH revent.
ENDCASE.
ELSE.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'REVENT'.
ENDIF.
MESSAGE e460 WITH revent.
ENDIF.
ENDIF.
ENDIF.
IF sortvk IS INITIAL.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'SORTVK'.
ENDIF.
MESSAGE e830.
ELSE.
SELECT SINGLE * FROM t021m
WHERE progn = 'RFKORD*'
AND anwnd = 'KORB'
AND srvar = sortvk.
IF sy-subrc NE 0.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'SORTVK'.
ENDIF.
MESSAGE e832 WITH sortvk.
ENDIF.
ENDIF.
IF NOT rindko IS INITIAL
AND revent IS INITIAL.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'REVENT'.
ENDIF.
MESSAGE e450.
ENDIF.
IF NOT rindko IS INITIAL
AND NOT revent IS INITIAL.
IF t048-event NE revent.
SELECT SINGLE * FROM t048
WHERE event = revent.
IF sy-subrc NE 0.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'REVENT'.
ENDIF.
MESSAGE e460 WITH revent.
ENDIF.
ENDIF.
IF t048-xspra IS INITIAL.
IF sy-batch IS INITIAL.
SET CURSOR FIELD 'RINDKO'.
ENDIF.
MESSAGE e500 WITH revent.
ENDIF.
ENDIF -
Why can't I get my iphone to import all the email address when it imports from address book? It syncs all other info.
I tried over and over, there must be something I need to change.
It make we want to go back to my blackberryUsually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Backing up, updating, and restoring iOS software -
Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him my 4s. We want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address on 4s iPhone. Also, when I tried to change iMessage I got a message that if I deleted my id (which seemed to be the only way to get my husband's I'd there), I would not be able to receive iMessages on any device.
Would someone kindly tell me how to set up th 4s for my husband so that we can keep our info separate? It would be most appreciated! Thanks!!Hey Fagen!
You will want to see the following article for guidance on achieving the result you wish to achieve:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
I would just follow the instructions from this article to give your unused 4s to your spouse. Since you have already started using your 5s, you will still be receiving iMessages on that phone and will have no need to receive them on a device that has been replaced. Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
AddressBook - Is there a way to change multiple addresses at the same time?
To be clear....I have 25 contacts at 1 company and that company moved.
Is there a way to link the cards together so that when I change the address on one card it automatically updates the other 24 cards?? Rather than having to change each contact individually, which is time consuming and annoying.
I have created a "Smart Group" for the company and all of the contacts place themselves in the group but it still won't sync the addresses.
Can someone tell me how to do this, if it's even possible? And if it's not, I really wish it was!!
Thanks!Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.
-
This morning, I upgraded to Snow Leopard from v10.5.8. Then, I exported 11 contacts from our old Now Contact database, intending to import that info into Address Book. It was an experiment, as we have 1199 contacts in 20+ categories and want to eventually get them into Bento from Address Book. The export automatically created a file called Export.vcf on the desktop, after I highlighted the 11 contacts. I tried to look at the info, but when clicked it opens Address Book, which then simply asked if I wanted to import the 11 contacts to it. I clicked yes. Then in checking Address Book 7, not 11 contacts appeared. I clicked on "All Contacts" and there were 1630. We only have 1199, so where did the extra 400+ come from? Since I had already clicked twice on the Address Book window, I couldn't undo the import. So I thought 'Ok, I'll trash Address Book and go to Time Machine, find Address Book, go to right after the upgrade to SL, hit Restore and bingo. Nope. I keep getting the post-import info, not pre. Con someone direct me to a solution? I want to get rid of the import contacts plus the extra 300 or so ( I already had a hundred or so in several categories)? Then, I need to figure out (1) why ALL the old records were exported from Now Contact, (2) where they were hiding in that .vcf file when Address Book recognized that I only wanted to export 11, (3) why Address Book showed only 7 imports in the "Last Import" group, but showed ALL my contacts in the "All Contact" group, even though they should nearly all have been safely untouched in the Now Contact DBase file. PS, I am not especially computer savvy. Thanks for any enlightenment.
Booting From Snow Leopard Installer Disc
1. Insert Snow Leopard Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Drive Preparation and Installation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard. -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
Importing text file to address book?
I created a text tab-delimited file for import. From within Address Book, ran "Import". Matched up field names. All looked good. When I clicked on "OK" basically very little happened. After a few seconds the blue OK button became clear but nothing else. I advanced another record, clicked OK on it and same few seconds then nothing. I expected all the records to be imported.
In any case, tried this individually with a few records, then checked the Address Book and none of the info was in there.
Is this some kind of bug? I don't see that I did anything that was wrong with the import.
Advice appreciated.
RichardNot sure if this helps, but ...
I made a quick text file to see if I could duplicate your problem. I put in three lines, the first with field names (First, Last, Work) and the other two with corresponding data. The values within each line were tab separated. When I ran AB's import I had to match up the third field to correspond with email (work). I flicked through the displayed records (all two of them!!) and they displayed as contact cards. I then clicked OK, and unlike your description, the import dialogue immediately vanished. The records were correctly imported.
When you look at the records in the import dialog do they all display correctly?
Could it be a 10.4.3 issue?
After attempting to do the import, has your contact count gone up?
What happens if you select the "last import" group? -
Is there a way to change the addresses used in an existing iMessage thread?
This is kind of a multi-part question. Let me describe my scenario.
I have many iMessage threads with other iPhone users where the "reply" addresses for one or both ends are the phone *numbers* instead of AppleID email addresses. (This could be due to a number of factors... either they had their "Start new conversations from" address set to their phone number, and/or they started a new conversation with me sending it to my phone number. How it *got* that way doesn't really matter). I want to be able to change the addresses of the conversation to AppleID's (so that I'll still get messages when I change SIM cards, among other reasons).
With iOS 8's new ability to add/remove people from conversations, I thought I would be able to add the AppleID address and remove the phone number address, but there are two problems with that: 1) iOS 8 seems to only allow this for conversations which began as multi-person conversations, and 2) it doesn't seem to want to let you add addresses for people who are already recipients via another address (in other words, if Alice is already on the conversation via her phone number, I can't add her AppleID to the conversation). I guess I could remove the person first, and then re-add them with the other address... but I'd feel safer if I could add the next one before removing the first one.
I know I could just tell the other person to delete our thread and start a new one, but I don't want to lose all of our dialogue and pictures (and I don't want to have to manually save it).
So, the questions:
Is there a way to change the address my counterparty is sending to when they make further replies to our conversation?
Is there a way to change the address I send to when I make further replies to the conversation?
Is there a way to change the default address to use when trying to send someone an iMessage? (What I'm after here is a way to craft my "contact" entry in people's phones so that, when they try to send a message to me and start typing my name, my preferred address comes up on top).
As it looks like the only way to do this might be to use iOS 8's method of adding/removing recipients, is there a way of converting a two-person conversation into a multi-person one?I think I may have solved it, actually. I find that if I switch the timecode to NDF in the source viewer, it seems to work. I have tried it on three clips and they have sync'd without problems. Hopefully this will continue to be the case.
-
Can't change MAC address of my wireless card on Windows XP
Dear Forum Members,
I have recently bought a notebook, Lenovo IdeaPad G550L (I haven't found section for the G series here on the forum) and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly changed MAC address. I installed the recommended driver, available from Lenovo's website, version 5.10.38.14. I tried the common way to change the MAC address, went to Control Panel -> Network Interfaces -> Broadcom Wireless Network Adapter -> Configure... -> Advanced -> Locally administered MAC address, and changed it to a different address (without ":" or any separator characters). Unfortunately this common solution won't work at all. Although, no error messages are produced when changing it (so it seems successful) my wireless router shows me the original MAC address of my integrated wifi card. Tried to restart my computer, my router, everything.
* Tried different drivers, downloaded a driver from HP which had a separate wireless configurator, Broadcom Wireless Utility. It worked like the driver from Lenovo (except this one hasn't got the utility), but I was still unable to change my MAC address.
* Tried a different driver from SoftPedia, version 5.10.79.14 (this is newer than Lenovo's), it didn't work either.
* Tried Nathan True's MACShift utility. It seemed to change the MAC address, but my router showed the original, so it didn't.
* Tried to look for official Broadcom drivers on www.broadcom.com but found nothing for BCM4310.
* Finally, I booted my alternative OS, the latest Ubuntu Linux, and used the kernel driver b43 for my wireless adapter. I tried to change my MAC address using the command ifconfig wlan0 hw ether .... and connected to my network. It worked, my router showed the changed MAC so the hardware (or the firmware) is capable of doing this by the right driver/firmware.
I tried to address Broadcom with the issue, sent them a letter like this post they replied that they are not competent, they wrote the following (I guess this was an automatically generated message because it got back in 10 seconds ) from [email protected]:
"As the chipset supplier, Broadcom provides driver support to our customers - the manufacturers of wireless devices - that ultimately provide products to end customers, such as wireless LAN vendors, cable modem vendors, and notebook providers. It is up to these manufacturers to provide product-specific drivers and software support to their end customers. Please contact the manufacturer of your wireless device for their current drivers"
Then I addressed Lenovo with the problem, their answer:
"Dear ******,
Thank you for contacting Lenovo, the makers of ThinkPad and ThinkCentre products. As I understand, you have purchased a Lenovo IdeaPad G550L and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly change MAC address.and you would like to know is there an official driver for Windows XP that allows you this basic feature like b43 in Linux. We apologize,Please do speak with our Idea pad technical Team at 877-453-6686 Option 1-2-1-2 for further assistance.
If you have further questions or concerns, please feel free to contact us at 866-42-THINK (84465) option number 2. We will be happy to assist at that time.
Once again, thank you for contacting Lenovo.
Sincerely,
Lenovo Websales/CustServe"
So this means I should call them and spend extra money for phone bill of international calls because of their fault of providing a basic feature that is to be expected from every single wireless card in the market. Should I believe that a guide over the phone is more efficient than a step-by-step solution or a link to an alternative driver? I'm getting kind of disappointed. At least they have understood (or copy-pasted) my problem, dutch comfort though.
Any ideas? Anyone experienced the same problem and solved it? Is there an official (or even unofficial) driver for this device for Windows XP that allows me this basic feature (like b43 in Linux)?
Thanks in advance,
str4ngSYes, I have posted this thread to different forums after I realized that Lenovo "customer care" is not likely to help me out and even wirelessforums.org members couldn't come up with any ideas for days, that's why. I have already written that helper applications like SMAC (or etherchange or macshift) don't work, because they do the same thing in the system as I change it in the driver panel, so they use the same method which simply does not work.
Locked? Definitely not. If yes, why can I change the MAC of my adapter under Ubuntu Linux using b43 open-source driver if it's really locked? Or you mean it's locked from software, because Lenovo or Broadcom didn't want their users to change their MACs or they just forgot to release a fully-functional driver? Well, then I would like to have a driver in which it's not locked, because this is a basic feature of my adapter of which the hardware is capable.
I have already contacted Broadcom, see their (automatically-generated) answer in my initial post, but I will try to do that again with more foresight. -
How to change email address in my jdc profile
I want to change email address in my profile. Can anyone tell me how to do it?
http://forum.java.sun.com/thread.jsp?forum=31&thread=299784
-
HI, i bought my i touch 4th gen from the philippines, and i transferred here in the US. i would like to purchase an application here in the US but i wont allow me to. and i have been trying to change my address and country but it wont let me too.
What happens when you change your address in your iTunes account? You also have to have a payment method associated with the USA, For example gift cards are restricted to the country of their purchase.
-
To change shipping address in sales order
Hi experts,
I have an issue here. I tried to change shipping address in an existing sale order. However, even tough I have changed and updated the shipping address in Business partner Master data. and the sale order itself, SAP still prints the old address for the shipping.
It is possible to change? or it is one of the control by SAP?
Thanks in advance!
PhilHi Phil,
Is this Sales Order generated through Quote?
Thanks,
Gordon
Maybe you are looking for
-
After a HD crash, I have to reinstall Photoshop Element 12 and Premier Element 12. I still see the link in my purchases history but nothing happens when I click on the link. How can I get my softwares back?
-
I got a new iphone and the apps won't sync.
The message I receive when I try to link the apps via itunes on my iphone is: "Application was not installed on the iPhone because you are not authorized for it on this computer". I recently had my iphone replaced and had the Main logic board, top ca
-
CC minimized windows popping up
This is an issue I have dealt with the entire time while using CS6. Adobe indicated to me they were working on the problem so I just KNEW it would be fixed for CC. But, apparently not. Excerpts from my previous post: I work in separate windows when u
-
XML service is not getting parsed
Greetings! My ip phone 9951 is not creating objects from xml service, it just returns xml code. This could be explained by the fact, that I'm doing something wrong, but I CAN see my service working as intended from another ip phone (model 8945). I h
-
When I right-click on a file to "Move to Trash", I get the following message: "Finder wants to make changes. Type your password to allow this." It then deletes the file bypassing the Trash basket.