Importance of Cheque updation...

Hi,
Can any body explain me why we need to update the cheque clearance date......The usefull?
thanks in advance
Renu

Hi
Check Clearance Date is used for the Reconciliation purpose to know on which date the issued check has been cleared.
Regards
venkat

Similar Messages

Hello i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to internet but another

hello
i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to internet but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem is remaining .is possible that to return to older version? if there is any solution share with me and i be very thankfulness of you.tanks again

It is not possible to downgrade to an earlier version.
Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update

Hello i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to inter net but another

hello
i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to inter net but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem is remaining . if there is any solution share with me and i be very thankfulness of you.tanks again

It is not possible to downgrade to an earlier version.
Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update

Why does Firefox, like others, feel it's so important that their updated browser have a "brand new look"? I don't want a "brand new look." I'm happy with the look as it is. So I will NEVER go to Firefox4.

Why does Firefox, like others, feel it's so important that their updated browser have a "brand new look"? I don't want a "brand new look." I'm happy with the look as it is. So I will NEVER go to Firefox4.

Firefox is highly customizable and you can customize Firefox 4 to look like Firefox 3.6, for details see http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6

Import PO Conditions, Update Price tab and price type

Dear All,
Creation of Import PO is little bit panic for users as they have to maintain minimum 10/12 condition per
line item.Also have to maintain the respective vember.My question is
1) During creation of PO condition value get copied. I want the 7 condition (JCDB,JCV1,JECV,J1CV, JECS,JSDB,JADC)
to be remain as it is and the balance freight,custom clearance,clearing charges to be wipe
out.But no such option found in "update prices" tab.Is there any setting to do such activity?
2) Can i customize "pricing type "as per the requirement?
3) Is there any way to avoid such tedious creation of Import PO?
4) There are 22 entries for price type and 12 customer reserve fields.How to use/customize these fields?
Regards
Sachin

Hi Ajit,
In import PO generally the tax part is always fix.like BCDEcessHEcess, CVDEcessHEcess, Additional Tax.But the
Insurance,Freight ,Clearing charges has to maintain as actual.So its maintain after receipt of Air way bill or Bill of Ladding.
So we want to maintain value of only tax condition at the time of creation of Import PO and balance when we were posting the planned delivery cost.Thats why we can't wipe out that condition from pricing procedure.
We want the other condition to be wipe out by customizing in Update Price button...Hope this will u...
Regards
Sachin

Can't import photos since updating to 10.10.3

Since upgrading to Yosemite 10.10.3 I can't import photos on my MacBook Pro (Retina, 13-inch, Late 2013).
It just stops in the middle of the import of the first photo and pops up an error.
"Import error (-9912)."
Note: The same camera and the same pictures imports perfectly on my not-yet-updated Macbook Air.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Feature Request: Import Sidecars When Updating PSE 8 Catalog

I am working to get a usable Lightroom catalog when updating from PSE 8. I have tens of thousands of raw files, several thousand video files in the catalog, almost all of which have an accompanying THM and/or XMP file in the same Windows folder as the photo or video file. PSE, of course, doesn't deal with sidecars, but I would have expected Lightroom to check for the sidecar, just as it does with a regular import of those files. Or at least allow you to ask it to discover sidecars from the library menu after the catalog has been updated.
I would re-import the files to get the metadata from the sidecars, but then I would lose all the tags, captions and other metadata I've built up in the PSE catalog. Lightroom doesn't give the option to "Read Metadata from File" for video files, but when I use on my raw files, it does not attempt to discover any existing sidecar files. The XMP sidecars would be especially helpful because they contain the PSE data (including date/time changes, keywords, etc.) for both raw and video files as written out by PSEDBtool from John Ellis.
If multiple sidecars are available for a file (e.g. both a THM and an XMP), I would hope that Lightroom would read both in date order, and apply the metadata in that order. That is, if the THM is older, read and use that metadata, and then read the XMP, updating any data supplied in that file, so that we get the benefit all all the data available. In the cases above, there is a lot of camera data in the THM for the video files that is not in the AVI, MOV or XMP files, so I wouldn't want to lose that.

John - Thanks for your helpful responses. A couple answers to your questions:
I do have XMP sidecars for my raw (and video) files, courtesy of psedbtool. In addition, most of my raw (and video) files have a .THM file associated with them from the camera itself. I have done very little with ACR in PSE 8, so I don't believe I have any XMP files from that source.
After converting my PSE 8 catalog to LR 3, I do not see any sidecar extensions in the LR 3 metadata pane, which is leading me to believe that LR 3 has ignored both the XMP and THM sidecars (I would have expected to see both listed). If I instead import the raw files directly, rather than through the PSE 8 catalog upgrade, then I see both XMP and THM sidecars listed in the EXIF metadata pane. For raw files, I can't be sure that the sidecars are not being read, because the camera data in them is duplicated in the raw file, and other data such as keywords may be coming straight from the PSE catalog.
By analogy, when I import video files with sidecars directly into LR, the sidecar metadata (both THM and XMP) is definitely imported to LR from the sidecars because that data does not exist in the video file, but it shows up in the LR metadata panel. If I instead upgrade the PSE catalog containing the videos, only the bare-bones file data comes in with the video files - none of the EXIF data from the sidecars comes in. LR doesn't even set a valid capture time for sorting in the grid view.
So I am drawing a conclusion that the PSE sidecar raw behavior is the same as the video behavior in this case. John - are you seeing sidecar extensions in the metadata panel in LR from imported raw files?
Thanks!
Jon

Mov import fails after updating from version 4 to 4.2.1

Okay, here's the story:
I've got 2 Computers - my AVID System and my new Premiere Pro System (that I hate already!)
I exported 2 QT file from AVID Express.
1. a QT .mov file with avid dv codec
2. a QT .mov file animation uncompressed
I Installed QT PLAYER and the AVID Codecs on my new PP Computer and tried to import both files into PP CS4 (Vers. 4.2.1)
Both files were imported, Audio was okay, but video appeard black.
I deinstalled PP and installed version 4.0 from the original DVDs. I imported the videos again and:
Video 1 (AVID codec) imported fine and video was there!
Video 2 QT uncompressed didn't import! Still Audio but a black video!
Then I updated to PP 4.2.1 and now both videos have the same problem again. Just sound and a black video...
I need at least to be able to open an uncomressed QT .mov

Hmm, I don't seem to have that problem and I have Avid and Premiere Pro on the same Mac laptop.
Couple of things to try - most of which I'm sure you've already done.
latest version of QuickTime
latest version of the Avid codecs - it's sometimes a pain as I've been fooled by the Avid website as to what's the latest version in the past.
clear your prefs - http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html
provide some more information about your system - specifically graphics card and driver version, OS, memory, etc would be nice too.
I think that adjusting to any new NLE takes some time: For example, I find Avid somewhat frustrating by it's modality, but obviously it's a great editor nonetheless. There are a lot of free tutorials that you can explore at Adobe TV among others.
Hope this helps,
Dennis

AMIE (CMDB) import don't update importand fields

Service Desk 6.2
I made important updates in ZCM11 devices like users (LoginName), serial numbers, Asset Tags, Producers of hardware, etc.
When I push refresh (Import) no changes were made in Service Desk neither in Items nor in AMIE snapshots.
How to ENFORCE updates of ALL important fields?

MIME snapshots were been updated, but the Items didn't.
OK, I think I found the reason.
I have customized import procedure, and have two import "servers". The true is,yhe server is the same, but ServiceDesk assigned some fields to first procedure and others to the second one.
This can be seen and corrected in page User>Configuration>Category>Hardware>Federation
I corrected this to ONE server and will observe.

Import excel for update of table

Hello
I'd like to import data from an excel spreadsheet or CSV file. Is there a simple way to update the table with this data?
Can import handle one spreadsheet containing data from 2 tables of which one is to be updated.
Eg. column 2 in rows 1 to 4 contain the foreign key values. The remaining rows contain the data to be uploaded to the table (UPDATE no INSERT)
Thanks
Cindy

Import is a utility that imports files in Oracle's proprietary binary dump format. The tool you would be looking at for loading a CSV file is SQL*Loader.
SQL*Loader can handle logical records that span lines, but it does not allow you to update a subset of the existing data in a table. You could load the data into a staging table and UPDATE the master from the staging table, however.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

DSLR import and other updates

I just uploaded a short video to my web site on the important change to importing for DSLR shooters in 10.0.6.
http://fcpxbook.com/DSLRupdate.html
I'll also be putting up changes and updates for my book soon. I'll also be shooting an update fro my Class on Demand training next week, which I hope will be available soon.
Thanks.
I stand to profit from this message.

Thanks Tom for this tutorial. You have been an immense blessing in these forums and all members have profited from your precise and knowledgeable answers. All wishes for you books and updates.

STMS - Import Queue not updating

Hi,
I'm hoping for a little guidance to track down a problem.
We have a simple 3 system configuration (DEV > QAS > PROD) and we're currently about 2 months away from going live with the Production box.
However, the STMS import queue for Production hasn't updated since 13/09. It's status is "Data obsolete or missing".
Being a bit of a novice, I'm not sure where to start to try track down why, after 12 months, this queue has stopped updating.
Any help would be appreciated.
Thanks

If the queue is not been updated the most likely scenario is that it can't read the trasnport directory or the STMS config is not maintained properly... what happen when you try to refresh the queue?... any errors?, Check the system status in the domain controller if theres an issue try to redistribute.
Regards
Juan

Importing problems after update

After the most recent update in lightroom I am unable to import photos. When I try to import, even just one picture, the screen says “import in progress” and then nothing happens. Ten minutes later, the same message.

I find that this often happens in Windows if you haven't selected a "Destination" in the right side panel. No thumbnails appear in the import dialog, but as soon as you click "Destination," boom! The thumbnails appear.
This wouldn't happen for "Add" because there is no Destination for "Added" photos.
Give it a try next time and see.
Mike

Problems importing movies after update

Anyone having issues importing movies into iTunes after the current update?

Have not heard of that problem, but try resettingthe SMC
http://support.apple.com/kb/HT3964

Unable to import music since update

Since the most recent update, I am unable to import cds. Please assist. Thanks

You have to upgrade to 10.6.8 to be able to download iTunes 11. The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion, Mountain Lion or Mavericks which are downloads only.
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.

Importance of Cheque updation...

Similar Messages

Maybe you are looking for