Importance of semantic correctness?

Hello,
I had a question which I was wondering about. Being a web developer, semantic coding is hard wired into, I want to achieve layout in clean and pure way.
When looking at app examples I also see they are all semantic, HTML5 elements are used such as "section" and "header".
I was interested to know if semantic correctness effects the app in anyway in the store? Does the store check it to see each page has a h1 etc? Or is keeping to semantic standards purely just to make it easier to code, and cleaner to read?
Thanks

As for certification... no. You aren't going to fail certification for these reasons.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Similar Messages

HT1386 my iphone doesn't import phone numbers correctly

my iphone doesn't import phone numbers correctly from my address book. some are imported with the area code separated from the number, as it is in the address book (by a dash or parentheses). these the phone will dial correctly. others are imported with all the numbers bunched together, without separations between the number and area code, even though in the address book they are separated. these the phone won't dial correctly, and I get a message from verizon saying it won't connect with the number as dialed. how can I get the phone to import the numbers as they appear in the address book?

Hi, bjholladay.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows XP or Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

ChaRM: "Import Urg. Corrections from Other Test Systems"

Dear all,
we are using Change Request Management on Solution Manager 7.0 EHP1 with a four-system landscape:
DEV - TEST1 - TEST2 - PROD
We want Normal Corrections to go the regular way from DEV to PRD with a longer stay in TEST1 for major release tests.
Urg. Corrections need to go the way DEV > TEST1 + TEST2 (at the same time) > PRD
They are only quickly tested in TEST2, which is on the same import level as PRD.
Now we discovered the task "Import Urg. Corrections from Other Test Systems" in the ChaRM tasklist and thought it could match our needs.
But whenever it is executed on TEST2 (no matter where the Urg. Corrections transports currently reside) the task result is status green with wording "There are currently no open imports in TEST2 system buffer".
I couldn't find any documentation or notes about this task. Has anyone experience with this or knows a good place for documentation about it?
Thank you!
Christoph

Hi,
when you open your change in crmd_order, is there a green flag near the status and can you change the correction in crmd_order directly?
And when you execute the report you are not in change mode in this correction in another session?
Regards
Andy

IMovie no longer importing analog source correctly -- what's wrong?

Hi all,
I'm using iMovie '11 with a VCR deck connected via RCA to a ADVC-100 Canopus converter that is connected to my iMac via Firewire 800. This setup has served me well for many years, though I've recently taken on a big project to capture about 30 old VHS tapes.The first five were successful, but suddenly I am unable to import correctly.
The image from the VCR plays as it should in the capture window, and when I hit import, it goes into a record mode. However, when I'm done importing, no new clip is made in the Clip Library, and when I go to the finder, the file is there but it has no data (it's reported as being Zero bytes.)
I have tried restarting the iMac, popping in a different VHS. I'm normally pretty savy with troubleshooting these kind of problems, but this has me completly stumped.
Any ideas?
Thanks.

**Interim update**
I discovered that in addition to my HG1920 footage, there was also 1080/50p footage on my SD card. When viewing recorded video on the videocamera itself, the 1080/50p video is actually stored separately to any other footage on the SD card, but I'm pretty sure that having 1080/50p video present on the card, is the reason my video importing into iMovie ends in an error. Same when importing the archive of the footage (because I'm assuming both the HG1920 and the 1080/50p footage are all archived together.
Seeing as how iMovie cannot handle 1080/50p video, this is probably what causes the constant errors.
I deleted the 1080/50p video off my SD card; deleted the existing video archive on my HD, and re-archived (as a precaution) and then attempted the normal import into iMovie directly from my videocamera, and voila, it worked like it always used to.
I then tested this by importing the archived video - this also worked.
I then tested another SD card I have recently used, and also discovered that this had 1080/50p footage on it as well. I did the same thing with this card as the other one (deleted the 1080/50p video, re-archived, imported directly from camera and imported from the archive), and everything worked fine.
Hooray!

ITunes 10.5.2.11 MP3 tag import not working correctly

Hi,
I recently had a hard drive crash so I'm starting from a clean install of Windows XP SP3.
Installed iTunes 10.5.2.11.
When importing MP3's into iTunes now sometimes iTunes reads the MP3 tags correctly. Sometimes iTunes ignores the tags and inserts the file name into the artist field as shown in the image below.
The same MP3's worked perfectly with previous versions of iTunes...although they were all automatic updates of iTunes and not clean installs (if that might make a difference). The same MP3 works fine with VLC or WMP with all the tagging correct. Now it is roughly 50/50 whether they import correctly or not. I've run the MP3's through MP3val and they come out clean. I am confident the MP3 files are correctly tagged.
The MP3's were either ripped with iTunes or are bought through eMusic/iTunes. Even with bought MP3's, with eMusic you couldn't be sure the producer would tag the files properly so I have put them through Musicbrainz tagger.
If I have imported an MP3 into iTunes and it has messed up the meta data, I have deleted the MP3s from iTunes, taken that MP3 into Musicbrainz, re-written the tags and then reimported the file. Unless iTunes is restarted it still gives me the corrupted meta data.
However, as you can imagine, with several years worth of eMusic library and my CD collection worth of MP3's, it is a very tedious process to go through each album, retag everything, then restart iTunes and continue until it finds another set of tags it cannot import correctly.
Any ideas what is causing this as it only seems to have been an issue now with this version of iTunes from a clean install?

Try here > Can't connect to the iTunes Store

Help with data imports and identifying correct contact

Hi Guys,
I am looking to import some data from a csv into a table called 'interactions'
This table is linked to contact via a 1-to-many relationship.
when I am importing data often I get errors saying that it cant determine which contact to use because we have contacts with the same name.
Is there anyway I can import data into the 'interaction' table and not only say which contact this is attached to but also provide some more information such as the contacts parent account so that it can identify the correct contact more often and leave
me less that I need to add manually?
Many thanks in advance

The data import wizard is built into CRM. You can now place csv files of different entities into a single zipped file to do a sort of pseudo batch import.
It may be helpful to download a template of the import file for the entity that you want to import. This can be downloaded within CRM. The benefit is that you are given the column headings. And when you hover over a column heading, it tells
you the data type it will expect. I will use the template and just copy and paste the data in from another spreadsheet if I get the data from a user. The import runs smoother then.
If you have the resources, there are 3rd party tools such as Scribe that can import data from different sources into CRM. A bit costly but you can get a trial version to test. The trial may only be good for 2 weeks. But it offers the ability
to transform data if necessary for the import.
Jason Peterson

Importing video with correct date

I'm having issue importing videos into iphoto with the original date of the video. I'm importing from a canon vixia HFS10, when i tried it a month or so back it went into iphoto correctly, with the original date but now whenever i try it, even with the same videos that worked date wise before, it only imports into iphoto with the date that i actually imported it with.
Any ideas?
I know you can alter the date via the edit options, but this seems a bit backward when i know, somehow, that i can import the video automactially with the date.

i only imported the videos from the same camera, one time they went with the date it was taken, the other time i tried a couple of weeks later it only imported with the date of import so it's not the camera

Lightroom does not display imported folders in correct location

Hello,
OS X Yosemite 10.10.1
Lightroom 5.7
In Lightroom, I try to import photos and store them in a folder named by date. All import settings are configured in such a way that Lightroom indicates that my photos will be imported as I want them to be.
Lightroom creates the folder in the correct location on disk.
However Lightroom does not display the newly created folder in the correct location after import, instead it adds the folders to the top level of my catalogue.
I've triedimporting from both from my cameras card and from a local folder, the results are the same for both methods.
Does anyone know why this is happening or do you have any tips on how I can trouble shoot this issue?
Something that may be related to this issue... while in Lightroom, if I right click the top level folder and click "Synchronize folder", Lightroom displays a dialog box indicating that there are new photos and missing photos...
"Import new photos (7934)
Remove missing photos from catalog (7931).
I have been importing photos in the same way for years. I have have upgraded Lightroom once, and I have swapped computers once.

This problem most likely occurs when there has been a case change in a path on disk. In other words (using the screenshot at the top of this post as an example), something like this:
/Users/hurley/Pictures/photographs
intentionally or unintentionally gets changed to:
/Users/hurley/Pictures/Photographs
(i.e., "photographs" was initially lowercase, but got changed to an uppercase "Photographs")
As you've discovered, Lightroom does not handle this well. You can fix the problem by completely changing the path, and then updating Lightroom with the new path. Try these steps:
1. Quit Lightroom.
2. In the Finder (i.e., on disk, not in Lightroom), alter the path that your photos are stored at. In other words (again using the screenshot at the top of this post as an example), create a new folder called "Test" inside the "Pictures" folder, and then put the "Photographs" folder inside the "Test" folder, so that the new path looks like this:
/Users/hurley/Pictures/Test/Photographs
4. Launch Lightroom. In the Folders panel in Lightroom, you should now see a question mark “?” on the “photographs” folder (and all the folders within it) because Lightroom doesn't know where they are any more.
5. Right-click on the “photographs” folder in the Folders panel in Lightroom, and choose “Find Missing Folder…” Direct Lightroom to the new location of the folder, i.e., /Users/hurley/Pictures/Test/Photographs. The folder, and the folders within it, should now be found, and the question marks should disappear from them in the Folders panel in Lightroom.
6. Now try importing again to see if the newly imported photos go into the right place.
-Ben

IMovie 11 does not import iPhoto pictures correctly. (Just updated to Lion)

I used to make plenty of stopmotion and timelapse videos using iPhoto and iMovie together, and as soon as I updated to Lion, iMovie will make every uploaded photo become one of the photos in the movie. When trying to play back, it only shows a black screen also. I was trying to make a slideshow but every picture ends up being the same one.
Thank You,
ChadG

Unfortunately, from reading the iMovie Discussion Board every day religiously this seems to happen. Somehow something clears up after having a big problem for a while. One thing to try is have iPhoto 'rebuild' its Library file by hold down Command key + Option key then launch iPhoto. This will bring up a dialog box with a number of options/check boxes. I don't know enough about each one to say which ones to check or uncheck. Possibly check all of them and let iPhoto run it's course until it finishes. You will have to wait a while if you have very large iPhoto library, but it might clear up this problem of importing photos from iPhoto especially after a OS X 10.7 Lion update.

Premiere Pro CS5 won't import still images correctly

I've about had it with this pile of ****.
Brand new install of Premiere Pro CS5. When attempting to import still images, random images will show up as other images. i.e. in Windows, I'll have the following:
one.jpg (shows up at one.jpg)
two.jpg (shows up at two.jpg)
three.jpg (shows up at three.jpg)
Once I import them into PPro, I get this:
one.jpg (shows up at one.jpg)
two.jpg (shows up at two.jpg)
three.jpg (shows up at one.jpg) <-----
In other words, three.jpg is named three.jpg in PPro, but when I bring it into a sequence, or view it, it displays the image from one.jpg
I've tried clearing the media cache, renaming the images, moving them to different directories/drives. Any suggestions? Or should I just get my money back ffs. Thanks for any help.
-Eric

You've stumbled onto a bug.
Here's the interim fix.
Imported Image Links Problem
And here

Most important question ever: correct pronunciation of yaourt

really: how do you correctly pronunce it?
ya-art ?
ya-oard ?
yrrrrd ?
I'm not a native english speaker, so phonetics or similar sounding words would be appreciated
Regards
Felix

http://upload.wikimedia.org/wikipedia/c … yaourt.ogg
http://forvo.com/word/yaourt/

Playhead info for imported video clips is static/constant in iMovie 9 as I scroll over the clips. Is it possible to make it display correct info?

HI, I have been importing videos clips from a SD card to iMovie 09. These clips are analyzed for animal behavior and the timing information for a specific event is critical for proper analyses. Most of the times, the imported clips display correct timing information for a given frame as I scroll over the clips. However, sometimes, some clips show a static or constant timestamp for all the frames in a clip and the timing information doesn't change in the playhead as I scroll over different frames.
For such clips, I was wondering if it's possible to display correct timing information for the frames, and how? Since I only need frame timing info relative to the starting point, I am open to a solution that involves readjusting starting timestamp.
Thank you so much for your time and help.

Several ways to do this.
I would scrub to the in point of the audio you want to change, then drag all the way back to the beginning of the clip. Then EDIT/SPLIT CLIP or right-click/Split Clip. Then go to the out point of the audio clip and drag to the right to the end of the clip. Then Edit/Split Clip. The clip in the middle should have your 25 minutes of audio.
Another way: Use Comment Markers
See this Tutorial from Ken Stone.
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#markers
If neither of those work for you, tell me more about what you are trying to do.

AVCHD 24P Cinema mode not importing correctly

Hey,
I have posted a few times about this issue, and each time I get a little closer to solving the problem. I am hoping this is the final time.
I have a Panasonic AVCHD HDC-SD9 Hi Def video camera. I recorded a comedy show of mine the other night, and when I try to import the footage into FCP, the audio and video don't sync.
After many troubleshooting experiments, I figured out that the audio is importing at the correct rate, but the video is not.
The video was shot in "24p Cinema Mode" I shot some "bs" footage both with this mode on and this mode off. Whenever it was on the footage would be imported at 24fps and the audio would get out of sync. Whenever this mode was OFF, the footage would import at 29.98 fps and everything will be fine.
I really feel I am just missing something simple like a drop down menu option or something, but just can't figure it out. Any help will be appreciated.

To be very clear, for this 7.1 release, we are only supporting CinemaDNG media from the Blackmagic Camera. No other format is being supported at this time. The pink overlay problem with DNG derived from Canon RAW media is a known issue.
We are currently in discussions of how to expand our CinemaDNG support going forward, and user input is a vital factor. Nonetheless, Premiere support for the CinemaDNG format is different from the support in other Adobe applications. For more on this, see the section "Enhanced BlackMagic Cinema Camera support" at this link:
https://helpx.adobe.com/premiere-pro/using/whats-new-7-1.html#Supportfornewcameraformats
-- Andy
-- Premiere Pro Team

How to import a transport from an urgent correction into QAS again ?

Hi guys,
we're new in charm.
We have an urgent correction document, with 1 transport.
We've put the urgent correction in status "to be tested" so now the linked transport is imported into QAS system. But this was a little bit too soon :-s
I had to do some manual work on QAS before importing that transport.
Can I easily (or how can I do this at all) import that same transport again into QAS ?
kind regards,
David De Boel

Hi Guys,
We have implemented change request and upgraded for SP 15 support pack
when the user tries to import through urgent correction by selecting pass correction to test the TP is not getting imported, when i checked the log it is saying
System cancel RFC destination SM_BQ2CLNT100_TRUSTED, Call TMW_SET_PROJECT_SWITCHES: No authorization to logon as trusted system (Trust ed RC=2).
You cannot import any requests for project BD2_P00001 at the moment
Then i went to show project status switches and changed as "Request can be imported" from " request cannot be imported", then the user is able to import the UC from the task list,
But ideally the status switches should be " request cannot be imported" so that the TP can be imported only through change request.
kindly give ur inputs as it is very urgent.
Regards
Raju

Automatic import urgent corrections

Hello ,
we have a userown urgent correction (zdhf). everything is ok, but we want import the urgent correction autmaticly in the productivesystem in the evening, if the urgent correction hav the status "authorized for import".
is it possible?
regards
nico
Edited by: Nico Effenberger on Oct 21, 2008 10:16 AM
Edited by: Nico Effenberger on Oct 21, 2008 10:27 AM

The question is answered.
We use now the report sap_socm_service_report with a variant. it works good.
thx nico
Edited by: Nico Effenberger on Oct 21, 2008 10:29 AM

Importance of semantic correctness?

Similar Messages

Maybe you are looking for