Important .docx file won't open. Corrupt.

Hi all. Posting on behalf of a good friend who has been working on a nursing project. She has written 3000 words and they were transferring the file between 2 laptops I believe via a USB stick. The file will now not open and I have also tried with no joy. 
Can anyone here try to open and recover the data please?
I have tried renaming it to a .zip file and it still won't open. I have just been trying to open it with Openoffice and no joy with that either.
I'm in the office so any help on this would be gratefully appreciated.
Thank you,

IF it is not a zero byte file you would try the following...
I'm not sure this will work but you could try this:
1. Copy the file and then Rename to something with a .zip extension
2. Double the file. If it will let you in it, then goto the WORD folder. There is a file called document.xml. This is where the actual contents of the file is located.
If you are able to retrieve this file, you might be able to create a new word file and replace it with this file. Otherwise, you could open it and get the text out of it and be able to retrieve what you can for the project.
If you cannot open the zip file then you are sol.

Similar Messages

  • Some users are experiencing difficulty opening certain docx files sent as email attachments. These files contain content controls to protect data in the document. Could someone please confirm that the content controls are the reason the files won't open.

    Some users are experiencing difficulty opening certain docx files sent as email attachments. These files contain content controls to protect data in the document. Could someone please confirm that the content controls are the reason the files won't open.
    These files open correctly when sent as doc files.
    Thanks

    Congrats to Saeid, Ronen, and Ricardo! Big thank you to all our contributors!
     Transact-SQL Technical Guru - February 2015  
    Saeid Hasani
    T-SQL: How the Order of Elements in the ORDER BY Clause Implemented in the Output Result
    Durval Ramos: "Very well structured and with examples that clarify how a T-SQL statement can change the data output order."
    Richard Mueller: "Good use of Wiki guidelines and great examples."
    Ronen Ariely
    Free E-Books about SQL and Transact-SQL languages
    Richard Mueller: "An excellent collection and a great idea."
    Durval Ramos: "A good initiative. Very useful !!!"
    Ricardo Lacerda
    Declare Cursor (Transact-SQL) versus Window with Over - Running Totals
    - Accumulated Earnings
    Durval Ramos: "The "Window function" sample was well presented, but it was unclear how the chart was generated."
    Richard Mueller: "A new idea that can be very useful. Grammar needs work"
    Also worth a mention were the other entries this month:
    [T-SQL] Retrieve Table List with Number of Rows by
    Emiliano Musso
    Richard Mueller: "Short but sweet solution to basic question."
    Durval Ramos: "A simple T-SQL script, but useful."
    [T-SQL] Search for Missing Values within a Numerical Sequence by
    Emiliano Musso
    Richard Mueller: "Clever solution with good code examples."
    Durval Ramos: "You need add more details about development of the idea and create a "Conclusion" section to easy understanding."
    [T-SQL] Converting Multiple Rows into HTML Format single ROW by
    Maheen Khizar (Bint-e-Adam)
    Durval Ramos: "In some situations, It's need to consume and format HTML tags for a UI, but It's important to remember that Best Practices recommend this formatting process preferably in Presentation Layer"
    Richard Mueller: "A great new idea. Some features need more explanation. Avoid first person."
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open.  Even though they are "jpeg, mov" files the error message is  could not be opened. The movie's file format isn't recognized. "  Any help or are they corrupted

    I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open.  Even though they are "jpeg, mov" files, the error message is  "could not be opened". The movie's file format isn't recognized. "  Any help or are they corrupted?

    Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
    Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files.

  • I do not have Microsoft office and to know if I can still open docx files - error message reads corrupt files.  Is there a reliable converter out there?

    I do not have Microsoft office and want to know if I can still open docx files - error message reads corrupt files.  Is there a reliable converter out there?  I am a new mac user.

    Install the free LibreOffice and save a bundle not having to pay MS. http://www.libreoffice.org/

  • FCP 5.1 file won't open in FCP 7

    Hi.
    I am at my wits end...I have a FCP 5.1 file that I have been working on for years.
    I had to upgrade to FCP 7 for reasons I won't go into and now my FCP 5.1 file won't open.
    It is a file with footage from P2 cards. It has magic bullet/looks builder used throughout. I am not sure if that is the issue at one point ONE of the messages I got when it crashed (I got a few different ones at different times) was something about looksbuilder not working right.
    In a nutshell, it slowly starts to open and then quits. (It gets to about 33 percent open over the course of 45 minutes and then crashes.)
    The file is about half a gig and there is plenty of room on the MAC itself so it shouldn't be that the Mac is overtaxed.
    I don't know what to do.
    I tried opening various back-up copies, etc. because I thought maybe something was just corrupted. NONE of them open.
    I tried deleting render files to limit how much it was trying to process when it opened the thing.
    I even tried turning off the external drives that hold the media hoping that if it couldn't find the media it would just open the shell of a file for me and maybe I could reconnect it all later. Obviously, grasping at straws...
    I am out of options. Do I just need to wipe my computer and reinstall 5.1 from scratch? That would stink because there is another project being worked on on the computer that is a FCP 7 file.
    I tried putting a copy of FCP 5.1 back on the computer (so I have 7 and 5.1 on there now) to get it to open, but FCP 5.1 won't work either now (I get General Error 41 - whatever that means) Maybe you can't have two versions of FCP on the computer? Maybe it thinks it got opened in 7 so now it won't work in 5? even though it never fully opened? Guessing...
    I'd appreciate any and all help. All I want to do is open the 5.1 file and save it in FCP 7 and work from there.
    Thanks!
    Shari

    Hey Michael:
    Thanks for the response. I did something similar in that I opened the file on another computer that had FCP 7 and it was fine. So I saved that. Then I went to my Mac and tried to open that file and it crashed...but it said something about Looksbuilder...so I contacted them and they had me uninstall, reinstall and then fix the preference files for Looksbuilder and it now opens.
    YAY!
    Thanks again,
    Shari

  • Keynote (6.2) file won't open. Can I make a new Index.zip file using some of the extracted .iwa files?

    Keynote (6.2) file won't open (hung and crashed during auto-OS update).  Trying to salvage everything possible.  I know about grabbing the pictures from Data folder, but is there a way to extract the good .iwa files and make a new Index.zip? 
    Tried extracting, capturing uncorrupted .iwa and deleting corrupted ones, but can't figure out how to re-compress to readable format for Keynote.  Seems silly that I can't ge the new .zip file to work.  There has to be some sort of manual work-around, yeah?
    Thanks.

    This problem has been reported to the AppleWorks team, but I doubt that we will ever hear if there is a fix. AppleWorks 6 is now nearly 6 years old & hasn't even had an update since March, 2004.
    Nothing has been found to be able to make AppleWorks 6.2.9 open the problem files. I've had it happen & not happen with all AppleWorks file types. These files can be opened by any other version of AppleWorks 6, including the OS 8/9 component 6.2.8. If you have the retail version of AppleWorks & have Classic installed, you can "Force" AppleWorks 6 to open in Classic to open the files, save them as AW 6 files & then open them in the OS X version. You do want to make sure you don't have both the Classic & OS X versions of AppleWorks 6 running at the same time. I find it much easier to use AppleWorks 5 in Classic to open & save the files. AppleWorks 6.2.9 has no problem opening AppleWorks 5 files.
    Peggy

  • Premiere Pro 4 File Won't Open

    Hi all
    I have an adobe premiere pro file that won't open. When I double click on it, the load project bar gets to about four fiths of the way, then it just stops. The last time I saved the file, I saved it to my computer, then I saved it to a portable hard drive to back it up (around four minutes later). Both versions of the file won't open. The previous file will open, but I have done 30 hours more work since then (on the new file). I thought it was enough to be saving every few minutes, saving back ups to a portable hard drive... I also have a raid 1 configuration! I was never expecting this. When I leave the Premiere Pro on the Load Project screen, it stays there for hours.
    If anyone has any ideas I would greatly appreciate it.
    -Linus

    Hi John
    Thanks for getting back to me. I just looked in autosave. The file that won't open was last saved at 11:02pm on the 16th. There was an autosave project at 10.25pm on the 16th, and that wouldn't open either (it crashes at exactly the same place as the other one). However, there was an autosave file at 6:17pm on the 16th that would open. Curious though, it doesn't seem to have a lot of the changes I thought I had made by this time. It seems to be earlier than this (although perhaps my memory isn't serving me correctly). Should there be more autosaves that this? I had the program open pretty much that whole time, and nothing between 6:17 and 10:25.
    Anyway, that's a start! Something must have happened between 6.17pm and 10.25pm that'd made the file go kaput. I would love to know what, so I can avoid this happening again. First things first though, it'd be fantastic to get the file that isn't opening working.
    Thanks for your swift response too, Jim. I opened PP and tried to open the file from the interface. The load project bar stopped at the same place. I can open other projects fine. As to your last suggestion, I created a new project, and went to File/Import then clicked on the file in question. It started importing, then the progress bar froze at exactly the same place. I'm not sure if I did this correctly. Is there another way to import a PP file into an existing PP?
    Thanks again for your time. It's just nice to speak to someone about this because I really freaked out when it happened.
    -Linus

  • Pages file won't open

    One of my pages files won't open. It has been fine, but all of a sudden a message comes up saying the file cannot be opened. There is no information as to whether it has been corrupted or not. When I try to open it in the mac-Microsoft office program it says the file is too large.
    Either it is just too large at 669MB and I need to reduce the size? or perhaps it is corrupted. I can open a preview version from its folder, by going to file and 'Quick Look "file name." But I can't copy any of it from there to paste into a new file...
    Could someone tell me how to reduce the file size? Or increase the memory of the Pages application? Or some other way of opening it.
    And no, I haven't backed it up like a fool.
    Thanks guys
    Message was edited by: hollobrain

    Yvan,
    Thanks for the tip on Activity Monitor, I did not know about that! I have a similar problem, and I hope you can help me. I have a MacBook with 2GB mem and early Intel Chip (see SN provided).
    I am writing a book with MANY pictures. They are all .JPGs and are fairly big. I have to keep the book in a single file if I want the Table of Contents (TOC) to work (I think... TOC is quirky). The file is 165.4 MB on disk and loads in Activity Monitor as 173.5 MB. With Preview Open and Safari Open, the system memory report says Free 161MB, Wired 296 MB, Active 1.06GB, Inactive 497.4 MB, Used 1.84 GB, Swap used, 41.8 MB. Pages loads the book slowly and functions okay with major hesitations from time to time; but it does take a VERY long time to save and will freeze with a wheel of death from time to time.
    The obvious answer is to divide the book; but that would defeat the TOC advantage I'm enjoying.
    Advice?

  • .psd files won't open

    I was using tiger and Photoshop 4 on a PowerPC. I now have a MacBook Air and 10.5. My .psd files won't open as stated in the following message "The document "filename.psd" could not be opened. I have also got the message that the file is corrupted and won't open. I used graphic converter to open the file and it did without issue and after I resaved the file it opens without issue, but not in Preview. It opens in graphics converter.
    Is there a fix so that my .psd files will open in Preview?

    You can try saving in another format that is compatible with Preview on the old machine. If that doesn't work, you might want to try using other 3rd-party PDF readers such as Adobe reader.
    Message was edited by: I love my macbook!!!!

  • Files won't open on PS3

    Files won't open on PS3 but are not corrupt. The open file when placed on flash drive and opened on another device.

    You'll need to include much more information to get a useful answer here: which camera; raw files (assume so, but could be JPEG, TIFF); version of ACR (4.something); computer (Windows, Mac), etc.
    Here's a wild guess though - you're using a new (or newish) camera with this older version of PS which (assuming you are trying to open raw files) doesn't support the camera in question. See this FAQ: http://blogs.adobe.com/crawlspace/2011/03/why-doesnt-my-version-of-photoshop-or-lightroom- support-my-camera.html
    Hope this helps, but as I say, more information will allow folk on this forum to give you a more definitive answer.
    M

  • PDF file won't open after saving it from the web.  get error message file is damaged.

    My PDF files won't open after saving them to Docs from the web.  I get error message file is damaged. Can someone help me correct this problem on Mac Air w Mountain Lion? 

    I wonder if the image is being embedded somehow and there is not enough scratch disk space to render the file. Just a hunch. Check your hardrive to see how much free space is available. Also, check your RAM and see if you can upgrade ( install more, install much more ) to max out as much RAM as possible. At a minimum, check for fragmentation and do a "Correct Permissions" via Apple's Disk Utility.
    But, weird things start happening when a font becomes corrupt. Not that one is, but it may be in your best interest to acquire a font management utility like Font Agent PRO ( if you don't have one already ). A good font management program can detect and disable corrupt fonts.
    CS1 and OSX10.4 should be fairly compatable with the 7500, but you may have gone as far as you can go. Think about upgrading to a G4 or a G5. I believe the 7500 was pre G3 ( which I think is the minimum requirements for CS1 ).

  • HELP! Files won't open and previously had Firefox icon instead of DW icons!  Leap Year thing?

    Hi!  I went to update my website, which I do every night before the first day of every month and all the files had a FIrefox icon instead of the usual Dreamweaver one.  I have shut down, reinstalled DW MX 2004 but the files still do not open.  The icons have now changed to DW but they are not opening with right click, opening from Applications folder, double clicking the file, from get info and open with DW.  I am stumped. HELP!  Need to update for March 1st.
    Is it something to do with Leap Year 29th Feb?  Checked the clock in preferences but can't see how this affects it.
    Firefox is always updated but the latest version does not seem to be as efficient as previous upgrades.  We installed Chrome as well.  Do they interfere with each other?

    Hi Ken
    I wish the 7.1 updater download had helped but it didn¹t.  All the files
    were backed up before the installation, which went fine.
    Mac 10.5.8
    We used Disc Warrior to defrag the hard drive, which did not make a
    difference.
    We recently started using Chrome, so now have 3 browsers in the dock,
    Safari, Firefox and Chrome.  Do they interfere in any way with each other?
    The files, which I hadn¹t touched for a month as I update on a monthly
    basis, initially had the Firefox icon.
    Below is the message to send to Apple, which did not go through their report
    system!  A little disillusioned with the service!
    Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 3.06
    GHz, 4 GB
    Graphics: kHW_NVidiaGeForceGT130Item, NVIDIA GeForce GT 130,
    spdisplays_pcie_device, 512 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E),
    Broadcom BCM43xx 1.0 (5.10.91.22)
    Bluetooth: Version 2.1.9f10, 2 service, 0 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD1001FALS-40K1B0, 931.51 GB
    Serial ATA Device: PIONEER DVD-RW  DVRTS08
    USB Device: Built-in iSight, (null) mA
    USB Device: Keyboard Hub, (null) mA
    USB Device: iLok, (null) mA
    USB Device: Apple Optical USB Mouse, (null) mA
    USB Device: Apple Keyboard, (null) mA
    USB Device: Deskjet 3840, (null) mA
    USB Device: BRCM2046 Hub, (null) mA
    USB Device: Bluetooth USB Host Controller, (null) mA
    USB Device: IR Receiver, (null) mA
    FireWire Device: d2 quadra (button), LaCie, 800mbit_speed
    Does not mean a thing to me.
    I am not late with updating the site, which is about New Zealand culture,
    month by month (www.englishteacher.co.nz). Probably only the third time I
    have been late since 2005. Not a huge amount of traffic, ~300 a month and
    free access to content but I would like to solve this problem.
    Could a reciprocal link have caused a problem?
    At my wits end.
    I really appreciate the help though.
    Cheers Yvonne
    From: Ken Binney <[email protected]>
    Reply-To: <[email protected]>
    Date: Wed, 29 Feb 2012 06:42:11 -0700
    To: Yvonne and Bill Hynson <[email protected]>
    Subject: HELP! Files won't open and previously had Firefox
    icon instead of DW icons!  Leap Year thing?
    Re: HELP! Files won't open and previously had Firefox icon instead of DW
    icons!  Leap Year thing?
    created by Ken Binney <http://forums.adobe.com/people/Ken+Binney>  in
    Dreamweaver - View the full discussion
    <http://forums.adobe.com/message/4236682#4236682>
    Not necessarily related, but did you also install the 7.1
    updater? http://www.adobe.com/support/dreamweaver/downloads_updaters.html
     Windows or MAC?
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either reply
    to this email or visit the message page:
    http://forums.adobe.com/message/4236682#4236682 To unsubscribe from this
    thread, please visit the message page at
    http://forums.adobe.com/message/4236682#4236682. In the Actions box on the
    right, click the Stop Email Notifications link. Start a new discussion in
    Dreamweaver by email
    <mailto:[email protected].ad
    obe.com>  or at Adobe Forums
    <http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
    Type=14&container=2240>  For more information about maintaining your forum
    email notifications please go to
    http://forums.adobe.com/message/2936746#2936746.

  • My microsoft word and excel programs won't work and files won't open.

    After an automatic HP update, my Microsoft Word and Excel programs won't work and my files won't open.  What caused this and what can I do to fix the problem without losing my files?  I have files that are part of my work and I HAVE to have them ASAP.  Please help.
    Thanks in advance.

    Hi
    Please find the steps to resolve your issue.
    Open Installed Updates by clicking the Start button , clicking Control Panel, clicking Programs, and then, under Programs and Features, clicking View installed updates.
    Click the update that you want to remove, and then click Uninstall.  If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
    Or Try this step
    If this does not resolve your issue then you can try a System restore to the date where unit was working fine steps provided below for you.
    Start in search box type System Restore then click on it then select the Date where unit was working fine.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • HT204382 mpeg video file won't open in quick time player on my macbook running snow leopard. Works fine in iMac running mountain lion. Any ideas

    mpeg video file won't open in quick time player on my macbook running snow leopard.
    works fine on iMac running mountain lion.
    any ideas?

    HI,
    If iChat is Open and your think Accounts/Screen Names are logged in then go to the Window Menu
    This should list the accounts that are logged in with various keystrokes ( Apple/CMD ( or ⌘) and a Number) shown next to them.
    Using these should get the Buddy list "back".
    It is possible to Hide the Buddy list and then Quit iChat.
    iChat will then "remember" where the windows were eve if this was Hidden.
    Can you confirm that after reinstalling or restoring from Time Machine with possibly an Earlier Version you have Downloaded the COMBO version of OS X 10.6.8 and "run the COMBO" (Installed it - again) to update iChat ?
    It is possible the text chat Window is also Hidden on double clicking a Buddy.
    The easiest way for this to happen is to use a second Display and drag some windows to the second Display.
    iChat "remembers" where you last had Outgoing Chats so Audio and Video windows will be where you left them as will Text Chats.
    Incoming Chat Invites are normally in set places unless there is a chat already open to that Buddy.
    With  Windowing issue like this is sometimes pays to delete com.apple.ichat.plist itself  (on it's own) and restart iChat  (this plist holds the window positions amongst other things)
    8:49 PM      Monday; February 27, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Pdf files won't open in Safari running on a Mac

    I just upgraded my MacBook Pro to Snow Leopard in preparation for Lion and ever since the upgrade, pdf files won't open in Safari.  I have Reader 9.4.5.  It opens documents that are on my machine, it just won't open in Safari, nor do the documents download.

    MIght be helpful to disable Adobe plugin by going to Adobe Reader's Preferences -> Internet and unchecking "Display PDF in browser using".
    Then dump the atrocious bloated Reader.
    See this https://discussions.apple.com/thread/3252667?start=0&tstart=0 for further solutions.

Maybe you are looking for