Important : Fetching max in "Page 1 of max" in minimum Time

How can I set report output parameter "Page 1 of max" to get output on first page in minimum time as it takes much time in fetching max page no. in first page and report is of around million pages

Similar Messages

Where can i find the chassis file for import in MAX for drawing connection diagram before purchasing

where can i find the chassis file for import in MAX for drawing connection diagram before purchasing
chassis: NI PXIe-1078
thx

This board is for an obsolete product called Measure - an add-on for Excel. Please repost with details on exactly what you mean by 'chassis file'.

Fetch max datetime records based on cut off time

Hi,
I want to fetch max date timestamp value for each key value but i do have cut off time as 21:00:00, which means anything after this time will be considered as next date 00:00:00 time value. I have attached an example for the same and
result set which i want. Kindly provide a SQL query for fetching like this.
Note: I have to use in a SELECT statement and i should not use temp table or cte, because i have to use this piece of code in another program where i cannot use temp tables. :(
Thanks!
Input:
ID is my key value
Output:
Regards,
Fazlu

Hi,
It should be partition by ID column and we need to add 3 hours during ORDER BY clause, isn't it?
select * from (select * , row_number() Partition by ID Order by Cast(dateadd(hour,3,[Date]) as date) DESC ) rnfrom yourtable) t WHERE rn=1
I will try the query in office tomorrow and let you know the status.
Thanks for the reply!!!
Regards,
Fazlu

Can JAVA import 3D Max Studio files?

I'm currently doing a research for my final project. The tittle is "Comparison Between JAVA 3D and Macromedia Director". Director can import 3D Max studio files, and i do not know whether can JAVA import 3D max Studio files? Pls help.... thanks

have a look at www.j3d.org , they have several different importers for 3d model file formats and might have one suitable..

How can I import text produced in Pages into Adobe inDesign?

How can I import text produced in Pages into Adobe inDesign?

Menu > File > Export > Word .doc/x
I doubt it will do graphics and layout, but maybe, depending on your version of Indesign you may hit lucky (but probably not).
Peter

Has anyone gotten the error message after statement of error from Adobe: Mismatched begin and rollbackUserAction calls? (Import::import action to. generate page bitmap for CONTACT US)

Help! Full error statement:
Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team.
Mismatched begin and rollbackUserAction calls? (Import::import action to. generate page bitmap for CONTACT US)

Please send us the .muse file and the MuseLog.txt file from your Documents folder to [email protected] Include a link to this thread for context. If the file is larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (If you use a service, please include your return e-mail address in the body of the message, since not all services include it in the sharing invite they send.) Thanks.

WorkManager entry for max-stuck-thread-time doesnot override the default

Hi All,
I am using WLS 10.0 and have configured the following workmanager entry in the config.xml:
<work-manager>
<name>myworkmanager</name>
<target>AdminServer</target>
<ignore-stuck-threads>false</ignore-stuck-threads>
<work-manager-shutdown-trigger>
<max-stuck-thread-time>60</max-stuck-thread-time>
<stuck-thread-count>5</stuck-thread-count>
</work-manager-shutdown-trigger>
</work-manager>
I want that the <BEA-000337> message should be logged after the work-manager-shutdown-trigger's max-stuck-thread-time exceeds (after 60 seconds).
If more than 5 threads of applications which are dispatched to this workmanager becomes stuck for more than 60 sec. an additional request to this applications are responded with http code 503.
However, no <BEA-000337> message is written in to the server’s log file.
This message is only written to the log file, when the stuck-thread-max-time (e.g. set to 150 secs) element of the servers configuration is exceeded.
Sample:
####<09.01.2009 13:31:58 IST> <Error> <WebLogicServer> <appcashd>
<AdminServerrefs1m1vm1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default
(self-tuning)'> <<WLS Kernel>> <> <> <1231504318065>
<BEA-000337> <[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "151" seconds working on the request "Http Request: /testservlet/sleep", which is more than the configured time (StuckThreadMaxTime) of "150" seconds.
Stack trace:
java.lang.Thread.sleep(Native Method)
at.compny.testservlet.SleepServlet.doGet(SleepServlet.java:61)
I believe that the <BEA-000337> message should already be logged after the work-manager-shutdown-trigger's max-stuck-thread-time exceeds (ergo after 60 seconds).
I would like to know if this is the default behavior or we are encountering a bug.
Any pointers would be appreciated

Hi,
what I was thinking about is that the work manager indeed works since the next request after the specifies number of requests is returned with a 503 error.
This makes me believe that it works !
However, the behavior of the server regarding the <stuck-thread-max-time> is not overridden.
I have specified this value as 60 seconds in the work manager.
However, this message is only written to the log file, when the stuck-thread-max-time (e.g. set to 150 secs) element of the servers configuration is exceeded.
Any Idea if this is the default behavior or if I am encountering a bug

How to import javascript files in page template?

Hi,
How can I import .js files into page template, so I can access its methods in each page that is built using that template? I have tried with <script> inside <f:verbatim> but didn't have much success. When I run a page that has a template with .js file imported in that way, I always get "report not found" error, or something similar (report is the name of the javascript method in imported file).
Pedja

Pedja,
The following works as well (assuming "/faces/" is part to the url):
<script src="../scripts/utilScripts.js"
type="text/javascript"> </script>Although, I prefer the use of your solution.
--Ric

How can I batch import images 1 per page?

I need to import images into the same Fireworks file, 1 per page. I have about 60 to do, and I'm hoping there's a better way then just adding them one by one. How can I batch import so that a page is created for each image?

You can use the Import Files into Pages command in this extension: http://johndunning.com/fireworks/about/PageCommands
Just select all the files in the file selection dialog. They'll be imported one to a page, sorted by their filename.

My brother forgot his passcode then his ipod disabled after trying the max amount of times. How do I fix it for him?

I need to know how to fix my brothers ipod touch 3. he used the max amount of times putting in the passcode and it disabled his ipod.

Start it in DFU mode, connect it to your compter and restore it using iTunes

HP xw8600 workstation fans run at max all the time after upgrading CPUs and memory

Hello, This is my 1st post on the forums here so I would like to thank everyone for the help ahead of time. I have an HP xw8600 workstation on which I have upgraded the CPUs and RAM recently - after the upgrade the fans seem to spin at full speed all the time (not just under load). Before the upgrading the fans were barely heard but afterwords the workstation has become very loud. This seems odd that the fans always run fast now and seems like this is not "normal" - what needs to be done to allow the fans to again be modulated by load/temp settings as designed? I looked in the temp and fan RPM settings in the BIOS and it looks like all sensors are working (including ambient temp sensor - was stating around 20 deg. C). Hardware changes:Before - CPU: 2x Intel Xeon X5460/ 3.16 GHz, 12MB L2, 1333 MHz, FSB,120WRAM: HP 32GB (16x2GB) DDR2-667 ECC FBD RAM - using RAM riser After -CPU: 2x Intel Xeon X5492/ 3.40 GHz, 12MB L2, 1600 MHz, FSB,150WRAM: HP 32GB (8x4GB) DDR2-800 ECC FBD RAM - using RAM riser NOTE: From the HP spec sheet it says that 32GB(8x4GB) is not supported by 5492... I am not sure why this is so and do not know if this has anything to do with my fans running very fast. HP 32GB(8x4GB)DDR2-800 ECC FBD RAM RISER Supported ONLY w/dual processors
5272, 5472, 5482 HP 64GB (16x4GB) DDR2-800 ECC FBD RAM Supported ONLY w/dual processors
5272, 5472, 5482 and 5492.
Acoustics waiver required. Other than the constantly loud fans the workstation works perfectly with the new setup. Please let me know if anyone has run into this issue with the fast fans and whether there is a fix for this (maybe flashing BIOS?). Any advice is greatly appreciated! [I originally posted this under Desktops section - http://h30434.www3.hp.com/t5/Desktop-Hardware/HP-xw8600-workstation-fans-run-at-max-all-the-time-after/td-p/3929746]

The xw8600 has a motherboard firmware setting that if it detects high powered processors in place it wants to see the "double tall" performance heatsink/double fans per heatsink in place. I have posted about that and how I rewired a double tall to use side by side in my xw8400 next to a single tall heatsink/fan to see how cooling was affected in that workstation. The xw8400 did not ever come with double tall performance heatsinks, to my knowledge, so its motherboard's firmware is different. In those posts I also explained how to do a simple jumper wire modification on a single tall heatsink to spoof the xw8600 into thinking it had a double tall/two fans in place over each processor. Simple and quick. So, you might want to get a couple of double talls off eBay, or try the jumper wire trick. I'd personally advise to get the double tall heatsinks given that you're running 150W max TDP processors. If I remember correctly HP wanted you to use the double talls for 120W max TDP and above. I'd feel comfortable using that trick on a set of 120 watt processors if I was not hammering them frequently, but it sounds like you're a high level power user. The all-fans-on-high can be due to a failed thermisitor in the front power cable reading ambient air temps too high, but you can check that in BIOS to see the temp and it sounds like yours is not elevated incorrectly. You can search for my experience with that in a xw6600, and it is an easy $8.00-$12.00 fix with a new cable off eBay. You'd want the longer version for the xw8600, versus the shorter one for the xw6600. Finally, maybe you've just gone too high in your total wattage use? Those risers can run hot and draw lots of power. Could you live with less ram and get rid of the risers using 4GB sticks? Sometimes those prior prohibitions regarding what is and is not supported go away with later BIOS updates. Is your BIOS the latest? Welcome, and let us know what turns out to be the problem so others can benefit too. Scott

AWT vs Max Call Wait time

I am looking a Call Type Historical report for a particular call type an dhalf hr interval it is showingh me AWT as 3:43:20 and the max call wait time is 12 mins.
Does AWT indicate that caller was in the queue for 3 hrs and 43 min while max call wait time is 12 mins,. Can someone clarify this ?

Hi Hemal,
While looking into the Webview Reference Guide, it tells that this value is Sum of Answer Wait Time for all the tasks answered in this Half Hour interval.
It is for all the tasks anwered in this interval
Regards,
Senthil

Insert pages from a single document multiple times

I'm trying to create a simple program that I can use to display PDF files that I can use to play at the piano. I perform often, and need to create "play lists" from which I can pull all, or part of, a PDF file containing music and display it.
I have it all working, except for one problem. I may need to "repeat" a section of a piece. I'm building up the play list by calling AcroPDDoc.InsertPages for each item in the play list. If a PDF file appears multiple times in the play list, when I call InsertPages, the call fails.
In this code snippet, pdDoc is the main doc to which I'm adding pages. playList is a generic List of my own PlayList objects, and I need to iterate through all the items in the playList except the first one, which is already loaded.
This code works great unless the fileName I specify has already been opened. The call to AcroPDDoc.Open succeeds just fine, but the call to pdDoc.InsertPages fails if the file has already had pages from it inserted. All other documents work fine. The documentation, of course, doesn't mention this.
        int insertPage = pdDoc.GetNumPages() - 1;
        for (int i = 1; i < playList.Count; i++)
          var newDoc = new AcroPDDoc();
          var item = playList(i);
          int startPage = 0;
          int endPage = 0;
          if (newDoc.Open(item.fileName))
            startPage = Math.Max(0, item.startPage);
            endPage = Math.Max(0, item.endPage);
            var totalPages = newDoc.GetNumPages;
            if (item.endPage < 0 || item.endPage > totalPages)
              endPage = totalPages - 1;
            int numPages = (endPage - startPage) + 1;
            if (pdDoc.InsertPages(insertPage, newDoc, startPage, numPages, 0))
              insertPage += numPages;
So, the questions:
1.) Is it possible to load pages from a single document multiple times?
2.) Is there a better way to do this? (That is, loop through a list of file names, starting and ending page numbers, and add the documents to an existing document.)
Any help appreciated! Thanks -- Ken

Hi Ken,
>The documentation, of course, doesn't mention this.
The documentation does not state explicitly that you can't insert pages again from a PDDoc you open again and never close.
But it mentions that you get references only from an already opened PDDoc.
"...Opens the specified document. If the document is already open, it returns a reference to the already opened PDDoc. You must call PDDocClose() once for every successful open..."
It doesn't state that you can't insert pages from a referenced PDDoc but it seems so.
I would close the PDDoc within your for-loop after inserting pages and release newDoc.
Regards
Norbert

Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?

Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?
Using 10.6.8 on MacBook Pro
Mikeaaa

I am running Snow Leopard. Transferring the same texts to TextEdit has no problems, so this is a Pages problem, I think. Corruption of Times New Roman and Arial fonts, I suspect, but where? and what do I do about it? I just need to be pointed to a source of advice, I think.
Thanks
Mikeaaa

Import of Apex Application to another instance takes a long time

Hi,
I have developed an apex application which is of size -24 MB .While importing the appl to another instance it takes a long time (few hours). The imported appl is working fine so far.
What should be the ideal time for the import of this size appl ?
Is it the usual due to the size of the app or some thing is wrong with the app ?
Any one can please throw some light on this, as I am unable to figure out if it the appl issue or the DB issue.
Thanks in advance!

The application is getting imported and running, so you do not really have a problem in hand.
24M is big, but not all that big to run for hours.
The time taken depends on the resources available on the server where you are trying to import. If the load on that server is high then the resources will be shared between all the processes run on it, and the import process will run longer.
Monitor disk and CPU usage, it will provide you some clues. Try importing at offpeak time and it should run faster if there is a server resource issue.
Regards,

Important : Fetching max in "Page 1 of max" in minimum Time

Similar Messages

Maybe you are looking for