Important files and parameters

Hi all
In forms 10g ,which are the important files and parameters and there use/utility.
like formsweb.cfg is the forms config file .
Is there any other utility files ?
ta
s

Additionally you need to check the env-file mentioned in the formsweb.cfg, which in general is named default.env and is located in the same directory as formsweb.cfg.

Similar Messages

HT1766 how do i get the pc to open up the file dialog when i plug in my iphone? It asked me what to do, and I said to import files and pictures, and now it goes directly to pictures.

I have a laptop with touch screen and windows 8. I plugged in my iphone because i wanted to sync my music to itunes. A box came up and asked what I wanted to do when the phone was detected. I had 3 choices and do nothing. I chose import files and pictures. and now, when i plug it in, it goes right to pictures. How can i change it so the little file box opens and gives me the option to "import files and pictures?"

You should install iTunes for Windows and sync your iPhone with it.

I have recently purchased an iMac from the Apple store. I previously had a windows computer and I transferred all my important files and music from the old computer onto an external hard drive. I've plugged the hard drive in and I can't seem to locate it!

Hi everyone,
Before I set up my new iMac, I transferred all my important files from my old windows computer (pictures, documents, iTunes etc) onto an external hard drive. I had no trouble using and locating my hard drive on my old computer, however I'm having great difficulty finding it on my iMac. The external hard drive is plugged in with all wires connected and correct. I've tried all the USB ports and I still can't locate it!
I just want to transfer everything from my hard drive to the iMac!
If anyone could help me locate and guide me through the process of using an external hard drive on an iMac, then that would be brilliant!

Try using Migration Assistant following this guide:
http://support.apple.com/kb/HT4413#3
There is advice in this document for using Migration Assistant from Time Machine or other hard drive.

Unable to import files and folders as project

Recently, my Aperture 3.1.2 didn't allow me to import files stored in an external hard drive, so I put this issue here sometime back and somebody gave me a hint to try to import in a different way i.e. File>Import>Folders As Project and it worked. A couple of weeks later, the above two methods didn't work again. After all I reinstalled Mac OS(downgraded from 10.6.8 to 10.6.4) and reinstalled Aperture version 3.1.1 accordingly. But I still can't import 16bit Tiff image files. (FYI, my SIGMA camera RAW file format X3F is not supported by Aperture 30.). In South Korea, Apple Korea did sell Aperture 3 product to me and provide ZERO service for Aperture 3 users, and they demand to directly contact Apple HQ Aperture support organization via international calls in non-native language. Please help me.

Hello Mr. Caggiano,
Sorry for late reply due to big time difference. Up until yesterday morning, I was running Aperture 3.1.2 on Mac OS 10.6.8(both are the latest versions.) As my Sigma SD15 camera RAW is not currently supported by Aperture 3, I deveop RAW files, adjust images and save them in Tiff 16bit format using Sigma-provided S/W on the EXTERNAL HARD DRIVE. And then I open Aperture 3 and import images from external HD for further image adjustments. This is the way I import files. I click File>Import>Folders As Project, and choose target files among displayed folder system. That is my ordinary workflow. I have had no problems until the following happened.
Yesterday afternoon, I chosed the specific folder to continue the remaining adjustments, but all of the folders including the target folder were all grayed out, and the spinning gear displaying "Loading assests" soon disappeared without showing any image thumbnails. I had no way to click "cancel" button on the buttom of Import Panel. Finally I decided to lower my Mac OS from the latest 10.6.8 to 10.6.4 and also Aperture version from 3.1.2 to 3.1.1. I had to create an another Aperture library to suit 3.1.1 version. And I tested again on the changed environment but the result was the same. Regretfully, going back to old Mac OS have caused Sigma-provided RAW conversion & adjusment S/W to restrict some functionalities such as file conversion and saving. In fact my lowered Mac OS is still higher version than Sigma-published s/w installation requirement. I may have to upgrade Mac OS again to 10.6.7, not the latest because I don't want to be an early adopter of the forth-coming Mac OS Lion. I am very perplexed now.
I tried to describe what happened yesterday as detailed as possible for you to come up with a solution. I look forward to hearing a good news from you.
Thank you. DK

Difference between importing files and adding files/folders to liabrary?

When I want to bring in new music into my liabrary from my my music folder, I don't know the difference between importing them and adding a file. They both seem to bring up the my music folder and seem to give me the same options?

To quote from the following link:
"When you add something to the library, essentially you are taking existing audio or movie files and adding an entry for each to your iTunes Library index. iTunes adds entries in your iTunes library for the selected files, and copies the files to your iTunes Music folder (if you have that option selected in the Advanced pane of iTunes preferences)."
"The Import menu item allows you to import playlists and other data files into iTunes."
For more see this page: About the Add to Library, Import and Convert functions

Importing files and getting CD i

okay, so i got my zen, and i have a lot of music files on my comp, and...i can't use them b/c they are all realone files and i don't think i can convert them. at least, my attempts (and they are numerous) have failed. i also can't seem to, when i'm ripping cds, get the information off the internet b/c as i'm sure you know it's very tedious typing in the cd info and track names, even if you only have a few cds. please help!

The easiest way to rip and get CD info, is to use the Windows Media Player to rip your CDs. Make sure that your internet connection is on and follow this basic "tutorial" to select your format. http://forums.creative.com/creativel...essage.id=5885
We (in this forum) will always recommend that you try the formats available at a few different bit rates to determine which sounds better to you. The tutorial mentions to use either "Windows Media Audio" or "mp3" as your formats. "Windows Media Audio (variable bit rate)" is also supported. NOTE: "Windows Media Audio Lossless" is NOT supported by Creative players as of the time of this post.
As long as Windows Media Player can connect to the internet, it should automatically download all available information about the CD in the dri've.
If you want, you can change the save folder by clicking the "Change" button on in the same window shown in the tutorial. To start the rip, click the "Rip" button on the top of Windows Media Player.

After some updates, Aperture stops recognizing previously imported files, and rewrites video metadata dates. How do I keep the from occurring?

I have been using Aperture since version 1 (to now, 3.x.x), and after some updates Aperture fails to recognize the files previously imported. I have checked the selection box that says "Do not import duplicates" every time I import. I have pics and videos dating back to 2001 in the Aperture dB. Videos were imported once Ap started to support it. (Well, the initial support was really bad...) Anyway, those earlier video files all have the same date - now - thanks to Aperture changing the dates to 3/24/00. The funny thing is, Aperture will not let me manually correct the dates. To me, it seems that after every major update, the dB gets "reset" and forgets files already imported. I'm not saying pics/vids imported in the last month, but say six months to five years or more. Any help is greatly appreciated.
I do not think this matters, hoever, my Ap is set up with referenced original on an external drive.
Thank you!

WOW!
I'm REALLY impressed by your exhaustive and detailled description!
How long did it take to write? Sure longer than the import itself...
Thank you so much. I got a working import of Ap2 lib before but your description have me various hints for handling problematic or faulty projects.
Matt

Help about importing files and fullscreen mode

Hi,
sorry but i'm kinda new about this. I'm creating a kiosk for my company which uses a touchscreen PC like what you see in the malls right now i.e directory. Im using flash cs5 and AS3. My problem is when I imported video / swf file in my stage (which is in full screen when loaded in projector), the video / swf file automatically change to full screen also. What I like to do is even if my window is in full screen mode, the video will still be the same what I set it to be. For you to imagine what im doing is in my homepage, my buttons would be video/swf files placed side by side. Once I click on one video it will go to another scene just like a website. I tried to google about this but no luck, all i find is how to import. These are the codes i used to load my project in fullscreen mode automatically.
var main:Stage = this.stage;
main.scaleMode = StageScaleMode.NO_SCALE;
main.scaleMode = StageScaleMode.EXACT_FIT;
main.align = StageAlign.TOP;
main.displayState = StageDisplayState.FULL_SCREEN;
Hope you can help me on this. Thanks in advance for those who will help.
Thank you
-Arjae

thanks andrei. but it still doesn't solve my problem.
var main:Stage = this.stage;
main.scaleMode = StageScaleMode.NO_SCALE;
//main.scaleMode = StageScaleMode.EXACT_FIT;
main.align = StageAlign.TOP;
main.displayState = StageDisplayState.FULL_SCREEN;
as u have said, i remove scale_fit line but still in full screen. when I run s swf file the video automatically converted to full screen. what i only want to make full screen is the stage where the video is located. is there some command i need to do on this? I tried to use this using AS2 and its ok, the video didn't go full screen even the stage itself is in fullscreen. but i really want to use AS3 because of some features. If you can help, it will be great. Thanks lot!

How to import files and convert folder structure to collections hierarchy?

My RAW files are organised on disc by date, e.g.
2013
01
02
etc
2014
01
02
etc
2015
01
2015-01-05 Family outing
2015-01-27 Walk along the Canal
etc
02
2015-02-01 Visiting granny
2015-02-05 Golf
2015-02-07 Skating competition
etc
I would like to batch import these into Lightroom (Lightroom CC) and have the folder structure above replicated in Collection Sets and Collections (i.e. one collection set for each year, and within each one have a collection set per month, and within that individual collections for the folders)
Is there a way to make this happen automatically?
Many thanks,
/alan

Hi.
Trash the iPhoto Library folder that you created on your Mac, or rename it "iPhoto Library damaged" if you may need some of its contents. Copy the iPhoto Library folder from the backup into your Pictures folder. Hold down the Option key as you launch iPhoto and select "Choose Library" from the dialog. Navigate to the good iPhoto Library folder and open. iPhoto should launch and open your library in exactly the same condition it was in when the backup was made. If all goes well you don't have to import anything.
If the library is still missing items, you can try a database rebuild. Hold Command and Option while you launch, select the first 3 options in the dialog, and rebuild. This can fix a library with a slightly damaged database.
If the library still isn't working you may have to create a new library (Option-Launch, select "Create") and import your Originals folder from the backup library. This will give you the pictures back without creating duplicates, but your albums and other items will not be recovered.
Regards.

I am using Windows 8.1 i have an External Hard Disk and one drive is now inaccessible due to sudden power failure few days ago. Now it shows "Data error (Cyclic redundancy check)". I want all my important files and Pics. How ?

Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank you

Then why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Query error using User Defined Files and Parameters

I am trying to select a date range with this query. When it is run without the WHERE clause, it works fine. When I add the WHERE clause, I get the error 'Received Alerts' (OAIB). Here is the code:
SELECT T0.DocNum, T0.DocDate, T0.CardName, T0.U_RMA_NUM, T1.ItemCode, T1.Dscription, T1.Quantity, T1.LineTotal, T2.Name[Return Reason Desc], T3.Name[Disposition Description],T0.Comments FROM ORDN T0 INNER JOIN RDN1 T1 ON T0.DocEntry = T1.DocEntry Left Outer JOIN [dbo].[@PRE_CUSTREA] T2 ON T0.U_RMA_CREAS = T2.Code Left Outer JOIN [dbo].[@PRE_RMADISP] T3 ON T0.U_RMA_DISP = T3.Code
WHERE T0.DocDate between [%0] and ['%1]
Does anyone have any ideas why this is erring out? Thanks for your help.

I am running this query under Query Manager. That did not work either. I am now getting an error that says Incorrect syntax near '0' Here is the latest code:
SELECT T0.DocNum, T0.DocDate, T0.CardName, T0.U_RMA_NUM, T1.ItemCode, T1.Dscription, T1.Quantity, T1.LineTotal, T2.Name[Return Reason Desc], T3.Name[PreGel Disposition Description],T0.Comments FROM ORDN T0 INNER JOIN RDN1 T1 ON T0.DocEntry = T1.DocEntry Left Outer JOIN [dbo].[@PRE_CUSTREA] T2 ON T0.U_RMA_CREAS = T2.Code Left Outer JOIN [dbo].[@PRE_RMADISP] T3 ON T0.U_RMA_DISP = T3.Code
Where T0.DocDate >= [%0] and T0.DocDate <=[%1]

File and folder import

I just installed Aperture and began to import files and folders from previous photo shoots (stored on a hard drive). I have many original jpgs that I modified in Photoshop and then saved as a separate version with a .psd extension. That means I have hundreds of files like 1234.jpg with a corresponding 1234.psd file. Upon folder import Aperture only imports the .jpg file and I cannot even see the .psd file in the browser when I try to import individual files?!? This only happens if I have used a common filename with different extension. Is this a bug or am I missing something....
I would really like to avoid to rename all my file names in order to import them properly into Aperture.
MacBook Pro Mac OS X (10.4.7)

Every image in Aperture has a Master. The Master is a file. If you want to control how those files names are organized (remember -- you leave the actual location on the drives up to the OS), use Referenced Masters. If you don't want to worry about this, use Managed Masters.
There is no way to change the Managed Masters file organization.
Aperture is an image management program. The image is the atomic unit of the database. Aperture gives you powerful tools for organizing, storing, retrieving, adjusting, and exporting (by which you create image-formatted files for use by other programs) images. It purposely relieves you of the burden of doing file management (just as long ago OS's relieved you of doing drive platter and sector management -- a task two guys named Bill and Paul made some money off of).
It's not, of course, Steve's way or the highway. You can have each of your images have a Referenced Master. You can either organize these as you see fit in Finder, and then import the files (at which point Aperture creates what it calls an image), or you can use Aperture's tools to manage your Referenced Masters.
The simplest thing to do -- recommended for those new to Aperture -- is to import your files into the Aperture Library and let Aperture manage the Masters. There is a lot to learn to take advantage of Aperture. You can always and at any time convert any Managed Master to a Referenced Master, and vice versa.
All of, and any subset of, your images in Aperture can be sorted by import session, date taken, day of week taken, aperture, lens used, color space, rating, size, bit depth, orientation, file format of Master, and a score of other criteria -- all with one click.
If you use Aperture, your file organization matters only for backup and security.
Message was edited by: Kirby Krieger

Importing files with sequence and leading 0's

I can not figure out how to import files and rename them so they have leading zeros. I can do this in Adobe bridge
image.001, image.011 instead of image.1 image.11
I do a lot of slide shows in Premiere pro and in order to sort the files within the BIN, i need leading zeros.
Thanks

When you do a rename, there's a drop down box for how you want to rename your files. At the bottom of that box is the word "edit". Use that.

Pleas help with my music files and folders on an external drive

A while back, I thought I had a virus on my C drive and was advised to by an external hard drive to move all my important files and folders to. As an inexperienced computer guy, this eventually led to a problem. I have many folders that shouldn't have been moved, main folders that were broken up, duplicates of songs, some song files that are empty, etc. This doesn't just apply to iTunes folders, it includes all the computer's music folders.
Can you please help me reorganize and delete duplicates (C and external drives)? Is there a quick way to search for song files that will not work? Is there a way to wipe out all iTunes files and start over without losing the songs bought via itunes?

Welcome to the Apple Discussions. I think you're in the wrong forum. This is the iDVD forum. If I read your question correctly you probably want the iTunes for Windows forum.
OT

Permissions problem when importing file in Final Cut Pro X 10.1.3

Hi guys!!
Today, like all days, I opened up my Final Cut Pro X version 10.1.3 and created a new Library and new project. Then I selected "Import Files" and I checked all the files I needed. Last I clicked on import selected files and I received this error:
"Directory Not Writable. The chosen directory is not writable."
This is a real tragedy. I have to start an important project and I can't use the program at all.
This is what I tried so far:
- Checked Macintosh HD permissions - Done - No problems
- I use an external HD as my scratch disk - Checked - No problems
- Tried to create a new project on a new HDD - Same error
- Checked Read / Write permissions on Macintosh HD and on footage folders - No problems
This is my Mac:
- iMac 21,5" Mid 2011
- Core i5 2,7 GHz
- 16 GB 1333 MHz DDR3
- AMD Radeon HD 6770M 512 MB
- HDD 1TB
- 2nd External HDD WD My Book 3 TB USB 3.0
- OS Yosemite 10.10
I'm in panic. And I really don't know how to resolve this problem....
Thanks for every little help you will give me.
David

And you're using managed media?
Did you repair permissions for the drive?
What OS are you using? Did you update to Yosemite? Did you do a clean install?
"drwxr-xr-x@ 10 aaron staff 340 Oct 28 19:51 project_local.fcpbundle"
Where are you reading this string?

Important files and parameters

Similar Messages

Maybe you are looking for